Memory of Safari problem

Similar Questions

• Limit memory for Safari?

  Is there a way to limit the use of the memory of Safari?

  This morning I found my system is not responding because a process of Safari had used all available memory and disk space (for the swap). The screen is locked, mouse movements began to record after a minute and the keyboard was unresponsive as well. I waited for several minutes without success.

  I have connected remotely via ssh on the ipad and noted that a process of Safari used about 40 gigabytes of memory; which is about all the 8 GB internal memory and the about 35 GB of free space on the disk, I normally. In the end, I had to hard reboot the machine as same sudo shutdown - r now does not stop him...

  To the point, it was a crazy amount of memory used and realistic anything over 2 GB would be a sign of a problem on a page already. Can I somehow limit the process of Safari to, say, 2 GB of memory?

  PS: I tried to kill the process of Safari with the kill, with and without the sudo command, but the process remained. Is there another method to kill the command line?

  PS2: Apparently, there is some javascript-clock world out there that is included in some pages that I visit that causes this. I was not able to identify the exact source of the problem.

  All the web, even on Windows browsers I find leak memory like the proverbial sieve. Most of windows or tabs that you have open and the longer you run more memory is used and "leaked".

  I'm not aware of a way to set a limit for a specific individual programme in terms of memory usage.

  To kill the Safari via a Terminal session by using the kill command, you must first find its PID (process ID), it would be running the ps command, to help out you, I've included a grep command to filter the unique process you are looking for.

  ch - x | grep "Safari.app".

  In fact lists two results, one the actual process of Safari, the other the command above itself that naturally contains Safari.app in command. You should then be able to

  sudo kill 1234-9

  by replacing the correct number of PID.

  However, there is another solution might be easier, who wants not to use kill command but rather use the command killall related as follows.

  sudo killall - c Safari.

• Leak memory like PC problem

  Hello

  I'm leaking memory like PC problem. When I put my cursor over the text, it highlights it, and if I put my cursor on an icon he drags it everywhere. I tried restarting several times and even go into safe mode and yet the problem presists.

  system of care in a few words:

  I have a Toshiba satellite laptop running Windows 7 x 64 bit and an AMD Radeon graphics card and a quad core CPU. I have Java installed and my ESET antivirus. My anti malware program is Malwarebytes anti-malware.

  Thank you and have a nice day :)

  Hi Alan,

  I sincerely apologize for not be able to address your concerns on a timely manner.

  Please keep us informed of the status of the issue.

  Regarding the material, I suggest you contact the local computer technician or the manufacturer of the computer for better assistance.

  Please let us know for any further assistance. If you have questions, you can always post here at Microsoft Community.

  Thank you and best regards,

• Massive memory leak Safari

  Since the installation of OSX v10.11.5 my Safari has developed a massive leak, making it unusable. I can look in the activity monitor the RAM is typed, then passing slot, making me have to force quit Safari, whenever it is open.

  Everyone knows this?

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Safari

  A right click or Ctrl-click on the line and select

  Services ▹ Open

  the contextual menu.* should open a folder named "Safari". Quit Safari runs. One or more files in the open file must have a name starting in 'history '. Move these files and only those which, on the desktop, leaving the window open. Restart the application and test. If there is no change, leave again and put the files that you moved back where they were, crushing those who could be created in their place. If not, remove the files that you moved. The browser history will be empty. If possible, restore deleted files from a previous backup problem.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Safari problem with el capitan 10.14.4

  I use a MacBook Pro mid 2012. I just upgraded to El Capitan 10.14.4 and have now some problems with Safari 9.1. Some links on the BBC News site no longer work. During the inspection of these links, they begin with < button id >. Can someone tell what is happening and how to fix it?

  I found a work around for the problem. Use Firefox instead of Safari, as the problem does not occur in Firefox!

• Safari problems with iPad

  I can open Safari on my iPad, (model ME392B/A, version 9.3) but no links beyond all. My iPhone and Mac Book pro work perfectly. I don't know if it's a problem of the iPad or Safari. I tried to reset it completely using the two buttons to turn off then wait awhile before Relighting. Can you help me?

  Try to update to iOS 9.3.1 was released yesterday: download iOS 9.0 - 9.3.1 Information

  iOS 9.3.1

  Fixes an issue that caused the apps to be insensitive after tapping on links in Safari and other applications

• Safari problems 'server is not safari.

  I was using safari without problem, but today I got the message "the server cannot find safari" what to do?

  Make sure that your Mac OS X software is up-to-date.

  Click on your Apple  top left of your screen. In the drop-down list, click: App Store

  Then select updates in the upper part of the window of the App Store.

  Lates El Capitan version available is v10.11.4

  And Safari 9.1

  If OS X is updated, troubleshoot third-party plug-ins and extensions Safari.

  Instructions here > If Safari is slow, unresponsive, which closes unexpectedly or has other issues - Apple Support

• 9.3 iOS safari problem

  I have problem with research on safari and mail lroblems after updating to iOS 9.3, when will it be fixed?

  Hello! This is a common problem and there is currently no permanent solution.

  Try turning off JavaScript under settings - Safari - Advanced.

  Keep patience, I think soon Apple will figure things out.

• Upgrade memory M50 satellite problems

  Hello

  I just tried to add 516 MB in my expansion memory slot, but the extra memory has not been recognized. Notepad starts fine, but only shows 465 MB of available space.

  I tried to change the original and new memory cards, and either card in a slot (0 or 1) on their own works as a 516 (which turned the cards and the two slots are working), but together they always show as only in use.

  Someone at - it ideas on what could be the problem and how to make so that he can use them together?
  Thank you

  The 465 MB is normal, because of the shared video memory. If I understand you correctly, the two connected modules, show only 512 MB?
  Perhaps you need to perform a BIOS update. Could help. You can find an update to the emea support & download page.

  The two modules comply with the necessary specifications? They should be PC2700 DDR - RAM.

• Satellite A60 - BACK memory checker detected problem

  Hello

  I have a problem using the recovery DVD, as posted above. Microsoft site Web told me I maybe lack of hardware (Ram) the error I get is unable to load the required DLLS for kernel.

  I ran the auditor of memory microsoft back and all the time, the results are expected: ffffff real: 7fffff

  I bought a new ram and installed the ram installed ok, but I still have the same problem.

  Now, I've read that this model has 256 MB of internal ram, which is hard.

  I think it should be this hard ram that has become corrupted somehow.
  Is that what this really hard hard ram?
  I can't locate it on the motherboard.

  This means, if the ram is corrupt and hard that I have to buy a new motherboard?

  Any help and advice would be welcomed - especially all that means I don't have to buy a new motherboard!

  Also, if anyone knows the model number of the motherboard, I would appreciate this too.

  Thank you in advance,

  Paul.

  [Edited by: admin February 11 06 08:28]

  Hi Paul

  According to the manuals of the unit the internal memory is not expandable and as far as I know not removable. I m not 100% sure if this module is defective.
  In my opinion, you should contact Toshiba. He can do a diagnostic test and it can give you a good answer on the blackout. Maybe you do not need to replace the motherboard.

  Good luck

• Memory card causes problems

  I have a new PRS - T1 and have devoted a 16 GB MicroSD card.

  1. with the card in place, the device does not "remember" any book that he was reading, which is stored on the card and also, of course, do remember not what page it's on. He can remember books in main memory, but not those stored on the card.

  2 with the card installed, whenever I press the HOME button, I get an error, "the Reader app has stopped unexpectedly. Please try again. "If I remove the card does not appear this error.

  Resetting the device made no difference.
  The firmware tells me that it is up-to-date.

  I had been using the MicroSD card on my MP3 player for several months, with no problems, so I don't think that a faulty card is the problem. (I deleted it before putting it in the Sony drive).

  What can I do to solve these two problems?

  I have a card in my reader too and that you are not experiencing these problems.
  Have you tried to format the card in the reader?
  You will lose all data on the card, so I suggest you to save on your PC first and then copy the map after formatting.

• Certificate of Safari problem

  For the last week or so I had problems trying to enter websites with Safari. A message appears that says that a client certificate is required. It does not stop me of entering the site, I just push on continue, but it is strange for safari do this. Anyone know how to solve the problem?

  >

  This message appears on websites like YouTube, Facebook, etc.

• Safari problems

  I received a warning a few days I got a virus on my 2009 27 OS x 10.8.5 iMac ago. The warning said that I had some problems with Safari and he suggested I call a phone number and said something to stop or not to close Safari.  I thought it was a scam want me contact one source that would open to attack me, so I closed my browser and sent a warning to friends I had just sent an e-card to.  I then opened my Firefox browser, downloaded the Malwarebytes Anti-Malware software and ran a scan on my Mac.  He showed no problem at all.  I stopped and restarted my Mac and had no problems.

  Now, after a few days, I started to see my very slow Safari, especially on Facebook.  I checked my operation of Facebook using Firefox and it seemed to work normally.  When I Quit Safari and restarted, it now, I can longer open any website.  Can anyone give me any suggestions of what is happening or what I can do to fix this?  This inquiry is sent from my Firefox browser.

  Unfortunately, I did not write about what said the warning I received.  I tried to do a command + P to print, but had no luck with that.

  It was a scam.  It is highly unlikely that something has been installed on your computer which did not exist as a first step, as you do not have call all numbers or give anyone a remote access to your computer.  Go to http://www.etresoft.com/etrecheck , download and run EtreCheck, copy paste here the status report.  It will give us an overview of your system right now, and if there is something about it which contributes to your slow, let's see and know how to proceed from there.

• Memory card reader problem

  I have a HP Pavilion dv5-2134us running Windows 7, 64 bit.  In the past, worked the small memory card reader to the front.  It does not now.  There must be a switch somewhere in the device manager - not to conclude.  There must be some downloadable HP driver - was not found.

  1. There is absolutely no problem with the camera (s).  Same model, several units.

  2. There is absolutely no problem with the memory chips.  Down them on another laptop HP as well last night.

  3. I checked to see if pins were crooked on the card reader-not.

  What is the solution?

  I need a specific link to windows 7 Home Premium, 64-bit driver for the memory chip card reader.

  I need a specific way to find the on/off switch in the Device Manager.

  If you run the operating systems Windows 95, 98 and old, be aware that Microsoft has changed names, places and so on.  So, tell someone what has worked 5 years ago may not work today.

  Hi @bdcochran01 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP Pavilion dv5-2134us Entertainment Notebookand of problems with a memory card or a player.  Here is a document on the memory card reader troubleshooting.

  Sometimes, Windows 7 will not allow any change in the drivers here is a solution for this.

  First of all, try to click on the Windows icon, type services in the start search box, and then click or tap on the advice of local Services. Scroll down to the Windows Installer. Startup type must be - automatic and the service status should be - started
  Restart the computer after this stage and try to reinstall.

  Here is a link to the software for the Alcor Micro Card Reader, to make sure that it is installed.

  I hope this helps.

  Thank you.

• The modernization Pavilion dv8t 16 GB memory will cause problems?

  I have a HP Pavilion dv8t Quad Edition Series Notebook PC, product number: VF836AV. The maximum amount of memory that can be installed in it is 8 GB, according to the operating instructions. I recently replaced the original 8 GB with 16 GB of memory, and the 16 GB is recognized automatically. The Windows system information report now shows that the installed physical memory is 16.0 GB and total physical memory is 16.0 GB. In addition, the original memory installed in the PC has been Crucial DDR3 PC3-10600 of type, and I replaced it with a Crucial DDR3 PC3-12800 memory of type. However, the newly installed 12800 DDR3 memory does not work at its full rated speed, it runs at the same speed as the original memory. There seems to be no problem with the configuration of the improved memory, but I can't help but wonder why the manual (and even Crucial memory Advisory tool) says that the maximum installed memory should be 8 GB. Memory of 16 GB currently installed will cause damage or some other problem in the long term?

  Hello:

  A few other people have installed 16 GB of memory in their notebooks with 1st generation i7 quad cores and reported no problems at all.

  I would be not the least bit concerned the performance of 16 GB in your mobile life.

  The reason why that memory does not run at 1600 MHz is...

  Memory can only run as fast as the processor FSB speed which, in the case of yours is 1333 MHz (10600).

  If the 12800 memory simply downlclocked to match the speed of the processor.

  Not until you get to the Intel 3rd generation I series with an Intel 7 series chipset processors memory runs at 1600 MHz.

  So there is nothing wrong at all to your situation.