Memory of the Smartphone Application blackBerry and reset to the factory setting.

Similar Questions

• Map memory MicroSD of Smartphones from blackBerry and SW version

  Hello world:

  I am an absolute beginner on the curve (8320)

  Question (s)

  (1) how to determine the version of the software of my BB Curve and therefore

  (2) determine the maximum capacity supported the Micro SD card

  Thanks in advance for your help

  Colchon

  1. to determine the version of the software BlackBerry go to Options > topic.

  2. use the table below to determine the maximum size of your device.

  BlackBerry Device Software Media card size limit           
  BlackBerry Device Software 4.2.0 up to 2GB
  BlackBerry Device Software 4.2.1 up to 4 GB
  BlackBerry Device Software 4.2.2 up to 4 GB
  BlackBerry Device Software 4.3.0 up to 8GB

• C2N25UA #ABA: how to reset my HP laptop to the factory setting, I have a virus

  My computer really works if not answer I have a virus and I read that if I reset to the factory setting that would get rid of the virus, please tell me how to reset to factory setting

  Hello

  There is a good description (including a video preview) of the 3 main methods to do a "factory Reset" on the following link.

  http://support.HP.com/us-en/document/c03489643

  Kind regards

  DP - K

• I want to restore the factory setting. I press F8 and their credentials for 'user '.

  Original title: I tried to restore my computer and it shows the other user. What should I do?

  I have a windows vista Dell and I want to restore the factory setting. I press f8 when the computer starts and then I choose the repair option. After that, it shows a written page another user with two spaces a username and another for the password. I tried to write my username and leave the password blank, but it does not work. I want to know if there is another way to restore or if should I do something?

  Hello

  This is Dells use of their recovery partition information

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  For more information, contact Dell

  http://support.Dell.com/

  or try the dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• Reverse the factory setting

  I have a phone that was given to me from my father-in-law, it's a phone of one of his former employees that was great in the office. We had no password information, so we tried to reset the phone to wipe and start over. This just finished sending us to a factory setting that requires an Apple ID and password that we don't have. How do I reverse the factory setting, so I'm back to the regular functions of the phone?

  Sorry, but you can't. This device is locked to the previous owners iCloud account and password activation.  Without their password or their active assistance to disable locking activation, will you not be able to use this device.

  See disable find my iPhone Activation Lock - Apple Support

• I need to get the factory setting

  Dear brothers,

  I need to learn how can I reset my DESIRE m6 dx1105 to the factory setting that include Win8 with all software and the original drivers.

  I faced a major problem which made me have to format the system and install the new Win8.1

  You know, I lost the hp logo when starting the laptop.

  There are a few problems with some software like software Cyberlink PhotoDirector, who refuses to be installed because my laptop is not allowed machine!

  I need to get the year ago as before factory setting, I bought the laptop!

  Thanks for your help.

  Hello

  According to this page specifications (http://support.hp.com/us-en/document/c03489385 , your laptop came with ' Standard/Core/Basic edition' of Windows 8 64-bit.)

  Only 4 editions exist for Windows 8-

  Standard-Basic-basic
  RT
  Enterprise
  Professional

  Related: http://en.m.wikipedia.org/wiki/Windows_8_editions

  There is no need to buy a new installation of Windows 8 for reinstallation disc
  It will cost you money & also it would contain a different set of product key that should be used in another system, also when you purchase the installation disk of retail sales that it may not work with your system, as it is not an OEM installation media & product key would be retail

  8 Windows laptop product key is encrypted in the BIOS of the laptop chip in the motherboard, would automatically activate the OEM of Windows 8 when installing.

  You can do your own installation of Windows 8 OEM media ordinary from another computer if you have access:

  Link to the 8 x 64 ISO of Windows file, download, save it to a known location on the system.

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  After you download the file, use this tool to make the file on a flash USB 4 GB or DVD drive bootable.
  The tool works for Windows 8 too-

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Note:
  When you click on the link to the iso file, sometimes you may get this message:

  "Sorry, you can't view or download this file at this time.
  Too many users have seen or this file downloaded recently. Please try to access to the file again later. If the file you are trying to access is particularly important or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you can not access a file after 24 hours, contact your domain administrator. »

  As the message says you can try again later or tomorrow. Must try several times until you get to download it - has a daily download limit.

  After making the bootable install OEM Windows 8 x 64 support, simply start your system when booting from it & installing,

  Note:
  What you will do here is a new Installation & installation media will not contain the programs, software, provided drivers with your laptop when you bought it,

  You could download the drivers from your product download page & save on another Flash/USB drive and run the configuration file after you have installed Windows 8 successfully in your system.
  Drivers download site: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5312254

  Kind regards

  Visruth

• How can I return my computer to the factory setting.

  How can I return my computer to the factory setting.

  Maggie,

  This facility will be provided by your computer manufacturer [is not part of Windows 7].  You will need to check the manual of your computer or the computer manufacturer's website for instructions.

  Denis

• BlackBerry Smartphones to Blackberry and very confused Newbie

  Hello everyone.  My name is Mohamed and I am relatively new to the blackberry Pearl 8100.  I've done a few things with him, but I know the reputation of Blackberry and knows he can do MUCH more.  I just can't understand this.  First of all, I read the posts on this site ALL day but I get lost with the acronyms.  If someone could tell me it please their significance, I'd appreciate it. Then maybe I can find the answers to the following two questions:

  1. How can I get my outlook and my blackberry to work together?  Can I get my addresses from outlook to my Pearl?
  2. Why do I not take photos that are saved on my press card and save them in my phone n command to get the Destop Manager?
  3. I have the SAME problem as a gentleman named Xavier and his post, I have included in this message. "I have an interesting problem with my Blackberry Pearl (8130). Every morning when I wake up the phone are always frozen on the same screen. Nothing seems to work except by holding down the power button until it stops. The screen is white (white) except at the Summit he said "Voice Dialing" then just below that "address book scanning for entries...» "or something like that, then right below 0%. She's. Every morning I have to restart my phone which is obviously quite annoying. Can I turn off the voice dialing somehow? I do not use it all. Is this a common problem? Suggested corrections? "Thank you, Xavier.

  I thought that mine is due to my bluetooth not turn off during the night and laying next to the Pearl, but once I turned it off and it continues I thought I was going crazy.  Also on my phone I can't hold the power button to get out, I have to disable the phone completely: out of the battery and the SIM card and then turn on the phone again when this happends.

  Please, any help you guys can give me would be great.

  Thank you!

  Korean

  reenie31 wrote:

  Insofar as this comment "have you improved the BB OS 4.5 recently.

  What is BB and how do I change the operating system? My current OS is 4.3

  You are welcome.

  BB = BlackBerry.

  A multimedia card constantly scanning sometimes occurs after the upgrade of the unit to the 4.5 OS and in this case is probably not your problem. May be, however. You have a memory card in the device, if you do, remove a few days and see if the problem persists and we will resolve this to find out what the problem is.

• Smartphones Pocketmac blackBerry and Blackberry 9530 Storm

  I need to sync my new blackberry to my new Mac computer. I downloaded the last Pocketmac but it will not sync my Blackberry and my Mac. I uninstalled and reinstalled. The 9530 is fairly recent. Does anyone know if the Pocketmac is not able to sync the phone because it's so new? Any help is appreciated!

  What version of Mac OS you are using?  My mac could not find my BB storm. I fixed it by upgrading my OS in Mac OS X 10.5.6 to 10.5.7 and pocketmac both pilot updated. The problem is resolved.

• I can't put my Dell Inspiron 5423 back to the factory setting after the upgrade to Windows 8.1

  Dear Sir/Madam,

  I upgraded my laptop Windows 8.1 yesterday and he had some compatibility problems with some applications. I want to restore it before the upgrade but cannot, then I run the Dell backup / recovery of value factory setting, but has no success (the interface at startup is also difference previous execution of recovery).

  I tried to run the startup recovery, but pressing F8 can not directly at the interface of recovery.

  Could you please say how to restore my laptop? I need to run my old application for my works.

  Thank you best regards &,.

  LM Hoang.

  You cannot use the factory recovery partition once you have upgraded to a new version of Windows (including Windows 8.0 Windows 8.1).

  Dell ship no reinstallation DVD with systems and Microsoft do not provide a .iso download for Windows 8.0 or 8.1 Windows for OEM installations.

  If you have not completed the USB bootable Dell backup and restoration in advance before installing Windows 8.1 then your only option may be to install the real installation media, i.e. a reinstallation DVD or USB.

  If you live in the United States, you can fill the form here: https://www.dell.com/support/diagnostics/us/en/19/nondiagnostichome?dgc=SM&cid=266887&lid=4921161

  Unfortunately if you are outside the United States the only option which you rest is to call Support technique Dell to ask for a.

  Edit, you can also try to download the latest version of Dell backup and restore: http://www.dellbackupandrecovery.com/en-us/Index.html

• How do I restore my HP DV6 - 3013CL to the factory setting?

  How can I reset my HP DV6 - 3013CL to the factory settings?

  Product number: WQ685UA #ABA

  Hello:

  First, back up all your files, that you do not want lose as a return to factory settings restore erased everything and reload back to the factory.

  Then restart the PC and at the beginning of the HP welcome screen, press the F11 key to start the Recovery Manager. Follow the instructions on the screen to restore the PC out of the box state.

  Paul

• Restore the 8 to the factory setting for ASUS

  I am using ASUS and I want to restore it back to factory setting. I checked google and they show to press F9 and choose Reset the PC. However, I fear the restoration will eliminate the disk OS (usually drive C) and the data drive (usually drive D).

  Is there another way?

  The update will let your personal files (such as images and documents).  But all the programs will be erased and must be installed new yourself using the CD of origin or by downloading new yourself.

• The mouse does not work after I restored the IBM thinkpad to the factory setting.

  I have an IBM thinkpad with win XP. I restored it back to factory setting. But I couldn't use the mouse more.

  spike88,
  If it's a brand mouse, you may need to consult the manufacturer for all drivers that may be required.  If it's a USB mouse then try another port.  You can also update Windows, and then test the mouse.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• F8 to restore it to the factory setting?

  I have a dell studio laptop with windows 7 and vista.

  I've used F8 it restore to factory setting.  But now F8 only will allow me to restore a previous backup.  What can I do to return to the original settings?

  Hello

  For Vista, F8 is the mothod of Dell to get Vista back to factory settings.

  Here is the information from Dell on how to do it.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  You dual-boot, so you could destroy the Dell recovery Partition.

  If you have, call Dell for recovery disks.

  See you soon.

• Can I go back to the factory setting after a new product windows, was intalled

  Windows 7 was installed on my computer (unbeknownst to me) by my friend to kid. I get this thing say activation has expired, and I need a product key. A friend don't know where is the Moose package, so I'm stuck either with the purchase of a product key that is over $ 100 or I wanted to know is any way to restore my system to window Vista? I don't have a CD as Vista is already installed when I purchased computer.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner