The mouse does not work after I restored the IBM thinkpad to the factory setting.

Similar Questions

• the Lenovo g500 mouse does not work after the upgrade to windows 8.1

  I recently upgraded my g500 windows 8 for winows to 8.1. But ever since then, my mouse does not work and the keyboard works only after standby. I tried to restore the default settings, but that didn't help. What can I do to fix this?

  Hello

  If the system is still under warranty,

  I suggest that to call a repairman,

  If this isn't the case, you can try to check the keyboard and the Touchpad connection.

  You can consult this service manual

  http://download.Lenovo.com/consumer/mobiles_pub/lenovo_g400g500g405g505g410g510_hmm.PDF

  Hope this helps

  See you soon!

• Mouse does not work after the upgrade to Windows 7.

  I recently installed Windows 7. All right, except that my mouse does not work. I tried several types: series, USB, PS/2 and wireless. I even bought a Microsoft Mouse, but while the keyboard is very well the mouse still won't play.

  Hi Jollydiver,

  Thanks for posting. You will need to contact HP to see if there is a driver available for Windows 7 chipset.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• Bluetooth mouse does not work after the mode 'sleep'.

  My Logitech bluetooth mouse Mouse loses communication after coming out of sleep mode.  The mouse does not appear in the devices Panel and will not resync.  To retrieve it, I have to restart, and then remove the bluetooth devices control panel mouse and then add the device again.

  When installing Win7, he acknowledged the mouse without having to manually provide the drivers.  I checked the Logitech website, which doesn't have to download disponibilitepour drivers win7.

  The question is not limited to the mouse as a bluetooth speaker system has similar problems with sleep mode.

  Someone knows how to solve the problems of Eve Win7 bluetooth?

  John
  System: Computer laptop Dell M1330, mouse Logitech V470 bluetooth, Win7-64 Edition home premium

  For the mouse in the right mouse click Device Manager, select properties then power management and disable the setting allow turns off to save power.

  For other devices, check the equivalent power management settings.

• Wireless mouse does not work after update Vista graphics driver

  Hey whats goin' I'm looking for a little help here Irecently downloaded a new graphics driver on my laptop and rebooted... suddenly all OOF, mouse not working anymore... What do I do?

  * original title - my wireless mouse died after I downloaded a driver what should I do? *

  Hello

  The video driver may be accessory to the mouse does not.

  Reboot again. If the mouse still does not work, check the batteries in the mouse and receiver
  connection. To the need to update or reinstall the mouse drivers - check with Microsoft Hardware, LogiTech
  or anything done to the mouse for the latest drivers.

  ==================================================================

  If this seems to be a USB problem AFTER the foregoing:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Logitech USB mouse does not work after the upgrade to Windows 7

  I have a HP Pavilion DV6XXX laptop computer series (MS Vista Home Premium has been loaded from the factory), recently updated with Windows 7 Home Premium.  It is then this problem began.

  Wherever I am, everything I do (typing, surfing, reading) my cursor made a break of about 3 seconds, 26-28 seconds.  This interruption is making me crazy!  Everything what I'm typing, the cursor becomes unavailable for 3 seconds.  Everything I typed is gone.

  My laptop has a touchpad, but I use a Logitech USB mouse.  I can't disable my touchpad, but that does not change.  In addition, it is matter if I type or not: my cursor disappears for 3 seconds, 26-28 seconds.  I can sit and watch it.  I have disabled the touchpad, unplugged the USB mouse, find the updated HP drivers and Synaptics to nothing does not.

  Looking for other suggestions.

  Original title: cursor refreshes frequently

  Hello

   
  Thanks for posting your query in Microsoft Community.
   

  I understand that you have problems using the mouse effectively on Windows 7 computer.

  (1) what is the Logitech mouse model number?

   

  In the meantime, please follow the following suggestions to solve the problem.

   

  Method 1: Try to put your system in a clean boot state, which helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Referring to "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after troubleshooting.

  Method 2: You can follow the link and identify and correct the mouse, touchpad and keyboard problems in Windows.

   
  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows
   

  Method 3: If the above does not help then, try to get the latest drivers installed for the mouse and see if that helps.

   
  Support

  http://www.Logitech.com/en-us/support

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.
   
  Thank you

• the mouse does not work after a beep

  I currently have Windows 7 installed on my desktop at home.
  Lately I had problems with the mouse. When I start windows, it seems to work very well. After a few minutes, I hear a strange beep & the mouse no longer works in total. I tried to disconnect & reconnected again to see if there is no dust collected but that doesn't seem to work. I checked if the drivers are updated, I saw that the latest version of the driver has been installed. I checked if there is a problem with the ports. I started in safe mode. Uninstalled ports & restarted my computer. For worms, it seems to work fine, but now it seems I have the same problem again. For this reason, it is necessary to reboot the machine again & again once because the mouse freezes & I'm stuck here.

  Help, please

  Hello

  ·         The mouse works fine with other computers?

  ·         Did you make any changes before the show?

  ·         How is it connected to the computer (wired or wireless)?

  ·         What is the number and model of the mouse?

  Method 1:

  If it is connected by USB, I suggest you try to login via the different USB port and check if the problem persists.

  You can also run the hardware and devices Troubleshooter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I also suggest you to start in safe mode and check if the mouse is working properly. To start in safe mode follow the below link;

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 3:

  If in safe mode mouse works fine, I also suggest you to place the computer in a clean boot and make sure that the third party software that is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: Make sure that when you have completed troubleshooting set the computer to a normal startup by following step 7 from the link above.

• Mouse does not work after registry clean and...

  I've heard that registry cleaning programs are not always good but did not have a lot of problems so far. Recently made one and mouse stopped working. His connect older not USB one. The keyboard still works, but not the mouse. The mouse still light inside too. I had for some reason at random to chance, he works at a startup, but not since. I need to get this problem that I have a big problem with BSOD but can't fight this problem until this problem is corrected. Tried, but some cases need the mouse.

  AMD Athlon 6000 + Dual Core Vista 32 HP Pavillion WMC

  Friday, October 15, 2010, 14:03:55 + 0000, sRecollet wrote:

  I heard that registry cleaning programs are not always good

  It is not that they are not always good, is that they are never
  good.

  but have not had a lot of problems so far. Recently made one and mouse stopped working. His connect older not USB one. The keyboard still works, but not the mouse. The mouse still light inside too. I had for some reason at random to chance, he works at a startup, but not since. I need to get this problem that I have a big problem with BSOD but can't fight this problem until this problem is corrected. Tried, but some cases need the mouse.

  Your registry cleaner allows you to make a backup? If so, use it.
  If this is not the case, do a system restore to the date before the execution of the registry
  cleaner.

  Here is my standard message on the subject:

  Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.
  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.
  Read http://www.edbott.com/weblog/archives/000643.html

  and http://aumha.net/viewtopic.php?t=28099

  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

  Ken Blake (MS-MVP)

• Windows Update and System Restore does not work after that the virus

  I recently had a virus on my computer, when I finally had removed my windows update does not work, my system restore will restore to any previous point and my computer seems to generally work more slowly.  Also groovemonitor seems still exists but is not really available to use, it runs in the process but is not available anywhere else.  Any suggestions?

  Hi TedDanson,

  1. do you get an error message when you try to run the restore system or Windows updates?

  I suggest you run a complete antivirus scan using Microsoft Safety Scanner to make sure that there is no virus infection:

  Microsoft safety scanner

  I hope this helps.

• Satellite C660 - click of the mouse does not work

  Hello

  I bought this laptop 5 weeks ago and now have problems with the right, click on the mouse does not work. Left click sometimes opens to the left, click on functions and leaves me is impossible to close programs or closed, double clicking in the pavement or enter does not work also.

  I tried to do a system restore to the factory, but I can not click on the next to take me through the restoration and end up having to close it via the main power switch.

  Any ideas please?

  Hello

  You have the same problems with a mouse external or just the touchpad?

  If an external mouse works correctly, you can use it to do a recovery install. This can help you to solve the problem, if this just s software.

  Not least have last but you tried to update the driver for the touchpad? You can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• HP wireless mouse does not work most of the time

  Original title: problem with my wireless mouse

  I have a problem, my wireless mouse does not work most of the time it's repair turning market sometimes, sometimes resembles
  dead, what is the problem I have the latest driver updates everything was ok, but 3 days ago, when I try to use it I see that it does not work
  now I can't use it, I try to restore my computer but locks is not any point of restoration and I plug a different usb port on the port still does not, for more than 2-3 minutes sometimes work! , look at these pictures when my mouse is not working the red light does not work!

  What should I do I have this mouse for 3 months when I buy with my hp touch desktop

  
  

  Thanks so much, I change my batteries and now works seems once again, the batteries will go fast
  can u help me to fix the error, I'm showing you pictured RunDll

• Why the highlighting of text in a PDF document does not work after you save the file

  Why the highlighting of text in a PDF document does not work after you save the file

  What application you use to highlight?

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• On my trackpad scrolling does not work after the upgrade to 12.0

  On my trackpad scrolling does not work after update Firefox from version 3.6.28 to version 12. It normally works in Thunderbird, and other applications. It is a Lenovo T61 with XP Service Pack 3 and all drivers up to date. Version 3 seems to have bad memory leaks so I would like to upgrade, but I can't do it without scrolling. I would appreciate any advice.

  Try to change the pref ui.trackpoint_hack.enabled on the topic: page default config-1 to 0 or 1 to see if that makes the work button.
  
  Close and restart Firefox after changing the ui.trackpoint_hack.enabled preferably.

  • http://KB.mozillazine.org/about:config