Memory problem while building a DVD Double layer

Similar Questions

• Satellite A200-1SV can not burn a DVD double layer

  Hello

  I have a problem to burn a DVD double layer.
  My laptop is a Satellite A200-1SV with a hd - dvd toshiba T802-L

  http://www.monsterup.com/image.php?URL=upload/1230321978.jpg

  Thank you
  Geoffrey

  Can't anyone help me?

• Problem DVD double layer on satellite A210-15

  Hello
  I have a satellite A210-15 and cannot read dvd dual layer, I a reading of dvd double layer and then nothing, the dvd player don't know the dvd.
  My sister has the same laptop that me and him it's ok.
  Can you help me.

  What is dual layer? Do you mean Double layer?

  Some software such as iTunes and Easy CD Creator can lead to conflicts of CD Driver filter. Try this fix:
  http://support.Microsoft.com/default.aspx?ID=314060

• Satellite P30-145: the drive won't recognise DVD double layer

  I have a Satellite P30-145 with a SupermultiDL DVD player. When I got the PC, I could write DVD double layer with no problems. Now the drive will not recognize DVD double layer at all. Even those from the same box that has worked well before. I use are Verbatim Double layer DVD + R 2.4 x discs.

  After a lot of internet research, I have downloaded and run DVDInfoPro. This application has reported that the Player did not support the DVD + RW DL. Very strange!

  Can anyone help? The drive is a carpet * a DVD-RAM UJ - 831S.

  Hi Lan

  This disc is certainly DL one, but I can imagine that the drive is defective and cannot calibrate lens in the right position. This model of laptop is more than two years, and if you have used this drive extensively, I can really imagine that the DL function is defective.

  What you can do is to clean the lens and see that it will help.

• DVD double layer on Toshiba Satellite L10?

  Hello
  Recently, I bought a Toshiba Satellite L10. How will I know if the DVD recorder has got the new system of double layer? It is not either written in the manual user, nor on the drive of DVD/ROM. there, he said: DVD + ReWritable, whereas it is said on the DVD, I bought: DVD + R DL. So if there is no 'DL' written on my drive doesn't mean it's doesn't DVD double layer?
  I hope you can help,

  Sunflower

  Hello

  I put t know what L10 you have exactly, but AFAIK series L10 has mounted fixed DVD-Super Multi (double layer) drive.

  Good bye

• COMBO DVD DRIVE DOES NOT READ THE DVD DOUBLE LAYER

  DEAR MEMBERS

  V HAVE DELL OPTIPLEX 330 PURACHED SYSTEMS. WHEN V TRIED TO RUN MAGZINE OF FIGURES AND OTHER DVD DOUBLE LAYER ON IT. DVD PLAYER DID NOT READ THE DVD SAID. WE HAVE REPORTED THE MATTER TO DELL. BUT AFTER HAVING REPORTED THE MATTER TO LONG-TERM DELL, NO SOLUTION HAS BEEN GIVEN BY THEM

  PLS COMMENT

  URS

  SGUPTA

  
  

• Problem with the support of ROM of DVD double layer

  I just bought the edition of Adobe Creative Suite Premium Web 6 DVDs I have have not yet opened the box and noticed that it is said that one of the requirements of the system is dual Lyer DVD ROM support is necessary. My question is, is it a requirement for one of the tools, or I won't be able to install the software, I don't have a DVD-ROM with support double layer?

  Hi adobe_new_product_user,

  DVD ROM is only necessary if you are installing the software using the disc.

  Generally most computers nowadays have double layer DVD ROM.

  Incase if there is no problem, you can also download the product and then install it

  http://prodesigntools.com/Adobe-CS6-direct-download-links.html

  Thank you

  Kapil

• Problem during construction on a double layer dvd

  Hello! I made a dvd of my vacation with yet, but it was so big (6.62Go) I bought a double layer dvd to build. I have a video set as first game and 3 menus that are auto-activées when we choose a different button (as in the tutorial but linda.com I put a video on the background instead of an image).

  When I start to build, the writing is good but to roughly a little more than one-quarter, still ejects the disc. I tried to read the dvd on my computer and a dvd, but he could not read. Please help me as soon as possible. I worked on this project for several days and I am very proud of the result. I want to really over!

  I use the most recent updated even on a 64-bit windows computer 7.

  I did everything and it did not work

  I'll take that as a 'no' to my question.  So I would simplify to see if you can sort out what works and what is not. Rather than mess with what you have, I create a new project, add a menu, use no autoactivate and no introductory video and import one of your videos as a timeline and just a link.

  Does it work?

  I would try each of the main items that John described too.

• Chapter Playlists do not completely play when built with Encore CS5 projects DVD double layer

  Friends,

  I don't know if this is a problem that is known or not.

  SETUP: I created a project in Encore CS5, basically, it's a movie of 2 hours and there are 2 songs in the film. The film consists of 15 chapters. I created a chapter of playlists to listen to the songs. I have three selections of chapter that are configured in the following way.

  SONG1 CHAPTER PLAYLIST-> chapter of a song is added to this selection. The actual number of chapter is 2.

  SONG2 CHAPTER PLAYLIST-> chapter of the second song is included in this playlist. The actual number of chapter is 10.

  CHAPTER PLAYLIST-> SONGS it contains two chapters (Chapter 2 and chapter 10).

  All of the above chapter playlists are linke to their respective button in the Menu of songs.

  : Project Encore CS5 for a DVD (dual layer)

  Menus: I have three menus, main Menu, Menu of songs and Menu chapter.

  Timeline: A chronology (MPEG2-DVD encoded thro first Pro CS5).

  Audio: Audio (PCM)

  Subtitle: A SubTitleTrack

  QUESTION: In the Preview mode all the chapter playlist play well and return to the Menu of the time songs that they are played completely. But when the project is built, read the DVD, this is the question I.

  1 SONG1 CHAPTER PLAYLIST (contains chapter 2 only) works very well, played in full.

  2 SONG2 CHAPTER PLAYLIST (contains chapter 10 only) go back to the Menu songs after a few seconds, does not fully play.

  3. all THE CHAPTER PLAYLIST SONGS (contains chapters 2 and 10) play Chapter 2 completely and starts Chapter 10, but returns to the Menu songs after a few seconds (same SONG2 CHAPTER PLAYLIST behavior).

  Please let me know where is the problem and can also let me know if you need additional information.

  Thank you and best regards,

  Vinciane

  Well, that's a problem with jumps of Encore.Encore layer creates a sordid cell to the place where the layer break is applied which once encountered during playback causes the action to end execution.

  To resolve this issue, do one of the following-

  Manual layer jump 1) apply exactly to the point of chapter. (I think that currently the automatic layer break is trying to apply the layer break in Chapter 10). To apply the manual layer jump, in the building Board select thenbuild and manual layer jump. A dialog box to select the layer break will appear. In this dialog box, you can specify the time code of Chapter 10 to which layer break must be applied.

  (2) if above does not solve your problem, try applying manual breaking down images before Chapter 10.i.e. If chapter 10 starts 00:49:55:20, are trying to apply the layer pause at the end of Chapter 9 of 00:49:55:10.This way which you will lose only a few frames of Chapter 9, but will be able to playback of the entire DVD.

  Let me know if it helps.

  Thank you

• Satellite Pro U200 - does support the DVD double layer?

  Hello

  Does anyone know if engraver of DVD of Satellite Pro U200-PLUA1E-02802QS4 supports the dual layer option?

  Kind regards
  CCBC

  Hello

  It s dependent not portable, it s according to the reader that supports double layer DVD or not! ;)

  To check the properties of your drive, for example with Nero. There you can see what are the types of discs, you can use in this drive.

• Media blank DVD double layer 8.5 GB LightScribe

  I am trying to locate Lightscribe 8.5 GB double layer DVD Virgin support.    Does anyone know of a supplier?

  Thank you

  Bleugener

  Consider the media instead of DVD-R DL lightscribe DVD + R DL lightscribe .

• Brander DVW/RW can read and write DVD double layer dvd

  Hello

  I would like to know if brander DVD/RW can also read and write the DVD DL(dual layer) dvd.

  or I have to buy for that special brander!

  Johan

  What is a "brander DVD/RW?   Support double layer DVD depends on the material.   Try to identify the make and model of the car since the Device Manager and find its specifications.

• Mac Pro mid 2010 low great player won't eject dvd double layer

  I was burning a dual layer dvd but the burn, kind of frozen and now I can't open my super low drive. I tried to reboot, restart, hold down the option key and lower the door to find a hole in which to stick a paper clip (but none doesn't seem to exist). All thoughts

  Open Terminal.app and type

  drutil eject of

• Memory problem while improving my Satellite A100-181

  Hi all

  I want to upgrade RAM on my Satellite A100-181, 512 MB is a bit limited...
  I ordered a 1 GB dimm noname a month before, put in it, with the 512dimm. As a result, we have only 1 GB recognized, and the laptop does not start if the 512 module is not mounted.

  I thought it was a bad memory module and ordered a kit 2 GB of crucial memory modules, which come paired and guaranteed by Crucial to be compatible with the toshiba A100-181.
  Result is the same: with 2 DIMMS inserted, the PC does not start: just turn on and off and still... With only 1 dimm, it does not start unless the 512 original module is attached to it... And once again, only 1 GB is recognized (915456Ko in the bios, but I guess that video reserved memory is not counted here)

  Is that what anyone has ever heard a problem / solution to this issue?

  Thank you very much.

  It is typical behavior when you use incompatible modules.
  Your laptop can handle with 2 GB max and compatible with 1 GB of Ram is DDR2 400/533 1 GB (PA3411U-1M1G). Use this part number to order compatible module.

  You can also buy the Kingston/Order module. Kingston offers high quality products and using them you won't have these problems.

  The Modules of RAM 'Value' use many chips cheap using several banks/channels, which can cause problems of compatibility with some Chipsets/CPUS.

• Qomsio X 300-engraver of DVD no longer Burns DVD double layer

  Hello..

  I have a 3 years old Qomsio X 300... Today, I tried to burn a DVD DL disc... and the shock was that I could not

  I don't know why... I have burned 7 front DVD DL discs with no problems at all of RICOH and Verbatim brands (the + and - if it matters)

  I tried several burning like ImgBurn, Nero 9, Windows burner software... None of them worked... It fills just the cache... I hear a clicking sound and keep it for about 5 minutes... Then he comes up with the message "write error". Differs from one application to the other...

  I tried all the media I have:

  Reading: CD / DVD / DVD DL
  Writing: CD / DVD only

  My drive is: HL-DT-ST DVDRAM GSA - T50N
  Firmware: RT04

  If someone has an idea? Is this a software problem or the drive is faulty?

  Thank you.

  Hello

  To be honest, I have not an answer to your problem, but one of my friends had a HP laptop, and in one night, it burned like about 10 DVD, a few days later, he tried to burn even more to discover that the drive has stopped burning DVDs, it can still be read but not burning. So I guess that you have a similar problem, which is most likely a hardware one.

  After all, the laptop optical drives are not heavy ones, we really need to be careful to use them, not as the ODS Office.