Media blank DVD double layer 8.5 GB LightScribe

Similar Questions

• DVD double layer on Toshiba Satellite L10?

  Hello
  Recently, I bought a Toshiba Satellite L10. How will I know if the DVD recorder has got the new system of double layer? It is not either written in the manual user, nor on the drive of DVD/ROM. there, he said: DVD + ReWritable, whereas it is said on the DVD, I bought: DVD + R DL. So if there is no 'DL' written on my drive doesn't mean it's doesn't DVD double layer?
  I hope you can help,

  Sunflower

  Hello

  I put t know what L10 you have exactly, but AFAIK series L10 has mounted fixed DVD-Super Multi (double layer) drive.

  Good bye

• Problem DVD double layer on satellite A210-15

  Hello
  I have a satellite A210-15 and cannot read dvd dual layer, I a reading of dvd double layer and then nothing, the dvd player don't know the dvd.
  My sister has the same laptop that me and him it's ok.
  Can you help me.

  What is dual layer? Do you mean Double layer?

  Some software such as iTunes and Easy CD Creator can lead to conflicts of CD Driver filter. Try this fix:
  http://support.Microsoft.com/default.aspx?ID=314060

• Satellite P30-145: the drive won't recognise DVD double layer

  I have a Satellite P30-145 with a SupermultiDL DVD player. When I got the PC, I could write DVD double layer with no problems. Now the drive will not recognize DVD double layer at all. Even those from the same box that has worked well before. I use are Verbatim Double layer DVD + R 2.4 x discs.

  After a lot of internet research, I have downloaded and run DVDInfoPro. This application has reported that the Player did not support the DVD + RW DL. Very strange!

  Can anyone help? The drive is a carpet * a DVD-RAM UJ - 831S.

  Hi Lan

  This disc is certainly DL one, but I can imagine that the drive is defective and cannot calibrate lens in the right position. This model of laptop is more than two years, and if you have used this drive extensively, I can really imagine that the DL function is defective.

  What you can do is to clean the lens and see that it will help.

• Satellite A200-1SV can not burn a DVD double layer

  Hello

  I have a problem to burn a DVD double layer.
  My laptop is a Satellite A200-1SV with a hd - dvd toshiba T802-L

  http://www.monsterup.com/image.php?URL=upload/1230321978.jpg

  Thank you
  Geoffrey

  Can't anyone help me?

• Memory problem while building a DVD Double layer

  Hello world

  I worked for several weeks to make a good dvd which is about 8.5Go in Adobe Encore CS5.1 (with an introductory film and several menus)

  But the problem is, after very long transcoding; Adobe still tell me that there is a problem with memory; in fact "insufficient memory, save and exit.." is all I can get :/

  If I've done several searches on memory; subject of flash memory and virtual memory, which one that I got, but it has not changed anything :/

  However, when I deleted some things in order to make a single layer dvd (4 GB); everything worked and the dvd is done. But I need to have this 8.5Go work of DVD Double layer...

  so I really need help; do not hesitate if you think you have an interesting idea or maybe the solution =)

  I'm working on Windows XP SP2 with a quad core 2.4 GHz (32-bit) with 4 GB of RAM (DDR2)

  I looked at what was the memory when even told me his insuffisantand here is the result: (with CTRL-ALT-DEL)

  -Adobe again: 1 595 080 KB

  - .....

  All together: 1 854 MB

  Yes, since I ' have on 4 GB of DDR2 RAM, I do not understand :/

  And on the virtual memory, I had something like 2000-4000 on the Windows partition (Ive many partitions)

  And now I have 4096-4096 on Windows Partition (where Adobe is installed), then 4096-4096 on another partition that is located on the same hard drive.  (where I put all of my works, you know). So ive even more than the virtual memory of 8 GB.

  I would appreciate your help; Thank you very much

  PS: I could put a screen of the error message, with all around, but everything is in french. So, if you are always interesting about this screen with no English language, suffice it to say, and it will appear ^^

  Gibbs says:

  I'm working on Windows XP SP2 with a quad core 2.4 GHz (32-bit) with 4 GB of RAM (DDR2)

  I looked at what was the memory when even told me his insuffisantand here is the result: (with CTRL-ALT-DEL)

  -Adobe again: 1 595 080 KB

  - .....

  All together: 1 854 MB

  Yes, since I ' have on 4 GB of DDR2 RAM, I do not understand :/

  The maximum limit of RAM addressable for ANY application in a 32-bit operating system is 2 GB. In fact, it is usually about 1.5 to 1.8 before make you it unstable.

  You install 4 GB is not because you can actually and according to what graphics & expansion cards that you have installed the use (and the mobo) you may well make things worse with additional RAM that it leaves no overload for cards.

  This is why it is not supported by MS and has always been.

  1.8 GB used, you are in the areas of the "no more available RAM" and the system becomes unstable.

  Why?

  Because you have - the facility physical RAM 4 GB - all deleted addressing space for expansion cards, system drivers etc.

  If you want to use 4 GB of RAM, you need a 64-bit operating system.

• COMBO DVD DRIVE DOES NOT READ THE DVD DOUBLE LAYER

  DEAR MEMBERS

  V HAVE DELL OPTIPLEX 330 PURACHED SYSTEMS. WHEN V TRIED TO RUN MAGZINE OF FIGURES AND OTHER DVD DOUBLE LAYER ON IT. DVD PLAYER DID NOT READ THE DVD SAID. WE HAVE REPORTED THE MATTER TO DELL. BUT AFTER HAVING REPORTED THE MATTER TO LONG-TERM DELL, NO SOLUTION HAS BEEN GIVEN BY THEM

  PLS COMMENT

  URS

  SGUPTA

  
  

• Satellite Pro U200 - does support the DVD double layer?

  Hello

  Does anyone know if engraver of DVD of Satellite Pro U200-PLUA1E-02802QS4 supports the dual layer option?

  Kind regards
  CCBC

  Hello

  It s dependent not portable, it s according to the reader that supports double layer DVD or not! ;)

  To check the properties of your drive, for example with Nero. There you can see what are the types of discs, you can use in this drive.

• Brander DVW/RW can read and write DVD double layer dvd

  Hello

  I would like to know if brander DVD/RW can also read and write the DVD DL(dual layer) dvd.

  or I have to buy for that special brander!

  Johan

  What is a "brander DVD/RW?   Support double layer DVD depends on the material.   Try to identify the make and model of the car since the Device Manager and find its specifications.

• Problem with the support of ROM of DVD double layer

  I just bought the edition of Adobe Creative Suite Premium Web 6 DVDs I have have not yet opened the box and noticed that it is said that one of the requirements of the system is dual Lyer DVD ROM support is necessary. My question is, is it a requirement for one of the tools, or I won't be able to install the software, I don't have a DVD-ROM with support double layer?

  Hi adobe_new_product_user,

  DVD ROM is only necessary if you are installing the software using the disc.

  Generally most computers nowadays have double layer DVD ROM.

  Incase if there is no problem, you can also download the product and then install it

  http://prodesigntools.com/Adobe-CS6-direct-download-links.html

  Thank you

  Kapil

• Chapter Playlists do not completely play when built with Encore CS5 projects DVD double layer

  Friends,

  I don't know if this is a problem that is known or not.

  SETUP: I created a project in Encore CS5, basically, it's a movie of 2 hours and there are 2 songs in the film. The film consists of 15 chapters. I created a chapter of playlists to listen to the songs. I have three selections of chapter that are configured in the following way.

  SONG1 CHAPTER PLAYLIST-> chapter of a song is added to this selection. The actual number of chapter is 2.

  SONG2 CHAPTER PLAYLIST-> chapter of the second song is included in this playlist. The actual number of chapter is 10.

  CHAPTER PLAYLIST-> SONGS it contains two chapters (Chapter 2 and chapter 10).

  All of the above chapter playlists are linke to their respective button in the Menu of songs.

  : Project Encore CS5 for a DVD (dual layer)

  Menus: I have three menus, main Menu, Menu of songs and Menu chapter.

  Timeline: A chronology (MPEG2-DVD encoded thro first Pro CS5).

  Audio: Audio (PCM)

  Subtitle: A SubTitleTrack

  QUESTION: In the Preview mode all the chapter playlist play well and return to the Menu of the time songs that they are played completely. But when the project is built, read the DVD, this is the question I.

  1 SONG1 CHAPTER PLAYLIST (contains chapter 2 only) works very well, played in full.

  2 SONG2 CHAPTER PLAYLIST (contains chapter 10 only) go back to the Menu songs after a few seconds, does not fully play.

  3. all THE CHAPTER PLAYLIST SONGS (contains chapters 2 and 10) play Chapter 2 completely and starts Chapter 10, but returns to the Menu songs after a few seconds (same SONG2 CHAPTER PLAYLIST behavior).

  Please let me know where is the problem and can also let me know if you need additional information.

  Thank you and best regards,

  Vinciane

  Well, that's a problem with jumps of Encore.Encore layer creates a sordid cell to the place where the layer break is applied which once encountered during playback causes the action to end execution.

  To resolve this issue, do one of the following-

  Manual layer jump 1) apply exactly to the point of chapter. (I think that currently the automatic layer break is trying to apply the layer break in Chapter 10). To apply the manual layer jump, in the building Board select thenbuild and manual layer jump. A dialog box to select the layer break will appear. In this dialog box, you can specify the time code of Chapter 10 to which layer break must be applied.

  (2) if above does not solve your problem, try applying manual breaking down images before Chapter 10.i.e. If chapter 10 starts 00:49:55:20, are trying to apply the layer pause at the end of Chapter 9 of 00:49:55:10.This way which you will lose only a few frames of Chapter 9, but will be able to playback of the entire DVD.

  Let me know if it helps.

  Thank you

• Mac Pro mid 2010 low great player won't eject dvd double layer

  I was burning a dual layer dvd but the burn, kind of frozen and now I can't open my super low drive. I tried to reboot, restart, hold down the option key and lower the door to find a hole in which to stick a paper clip (but none doesn't seem to exist). All thoughts

  Open Terminal.app and type

  drutil eject of

• Qomsio X 300-engraver of DVD no longer Burns DVD double layer

  Hello..

  I have a 3 years old Qomsio X 300... Today, I tried to burn a DVD DL disc... and the shock was that I could not

  I don't know why... I have burned 7 front DVD DL discs with no problems at all of RICOH and Verbatim brands (the + and - if it matters)

  I tried several burning like ImgBurn, Nero 9, Windows burner software... None of them worked... It fills just the cache... I hear a clicking sound and keep it for about 5 minutes... Then he comes up with the message "write error". Differs from one application to the other...

  I tried all the media I have:

  Reading: CD / DVD / DVD DL
  Writing: CD / DVD only

  My drive is: HL-DT-ST DVDRAM GSA - T50N
  Firmware: RT04

  If someone has an idea? Is this a software problem or the drive is faulty?

  Thank you.

  Hello

  To be honest, I have not an answer to your problem, but one of my friends had a HP laptop, and in one night, it burned like about 10 DVD, a few days later, he tried to burn even more to discover that the drive has stopped burning DVDs, it can still be read but not burning. So I guess that you have a similar problem, which is most likely a hardware one.

  After all, the laptop optical drives are not heavy ones, we really need to be careful to use them, not as the ODS Office.

• Create recovery media requests double layer DVD

  Good evening everyone.

  I just took delivery of my 5 new books for new employees of my company.

  3 of these notebooks are HP Probook 450 G2 (REF: J4R69EA)

  (These are the models with 128 GB SSD drives)

  The other two are Lenovo E540 with similar specs.

  So let's start, create recovery media. To ensure that is done before I give them to end users in question.

  While trying to create the windows disk, the program "HP Recovery Disc Creator" requires the double layer DVD: "Please insert a DVD double layer to move forward."

  The DVD in question that I use are discs of "Sony DVD + R 120 min / 4.7 GB" that in the past have always worked. (and now work for Lenovo laptops)

  Searching this forum told me to:

  http://support.HP.com/us-en/document/c03481733

  Unfortunately, this is not the same interface I. I choose only a drive to create a backup to

  (in this case, it is drive F:\ internal drive)

  I also tried an external DVD burner with the same results.

  I have not tried a USB, but this isn't what I want, and since you can create a backup set.

  Link to a screenshot: (you must copy paste in your browser apparently)

  http://loxsvc.netau.NET/HP/HP%20Discss.PNG

  It would be not that big of a problem if there was a real windows 7 key printed on the laptop.

  If I had a key, I would just reinstall the machine immediately with an image clean windows 7 so I don't have to clean up all of the HP software.

  but unfortunately this is not the case. So I need a Windows 7 recovery disk must be created.

  Any suggestions apart from the purchase of DVD DL?

  Thank you for your time

  -Sven signed

  Hey @SCamm,

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  Record double layer DVD-R and DVD + R discs can store much more data. DVD + R DL, also called DVD + R9 are what is needed to create the media recovery on this laptop.  Sorry to say.

  Thank you.

• I would like to make a simple DVD layer after successful burning double layer. But how?

  Hi all. I have a good DVD double layer of 8.54 GB of a project yet. Now, I would like to make a single-layer disc 4.7 GB or a picture from the same project. How do I do that?

  When I change the settings to disk information, the data remain too large for the small capacity disc/image. I don't know that I'm missing something simple here. Tried searching but couldn't find the answer.

  And also, I'm having a similar problem if I wanted to burn a DVD from a project created for a blu - ray player?

  If you transcoded in Encore, you select the active (not the timeline), right-click and "return to the original." If you transcoded before import into Encore, you go back to the source. You can select the asset and change the transcoding settings of "do not transcode" to a new setting, but this results in undesirable re-compression.

  The question is similar to the first Bluray, but still trails transcode Bluray and DVD separately. Thus, "back them to the original" is not the issue. Still use the original asset, not the assets of Bluray. HOWEVER, if you have imported a file ready Bluray you exported from your application of editing (Pro/Adobe Media Encoder first), then you have the problem of double compression again. Exporting a different file to MPEG2-DVD.

  In addition, HD to SD downrezzing doesn't do well in again.