Memory usage - of different values on the phone vs what iTunes says I

Free ITO space money that I did a sync on iTunes. Space free said 12 GB on the graph of iTunes, but within the parameters of the phone it says 750MB

IThink that this may have to do with Icloud videos I've seen. Whether I have. Some temporary files for easier access, but I'm not sure. In any case, I need to find a way to clarify the use of additional memory. I did a reset last month. Who got the phone and iTunes closer to the correspondent, but it's a real pain to have to save all the photos a day really load. (Photos do not take a lot of space)

What happens if you update to iOS 9.2.1?

Tags: iPhone

Similar Questions

different values on the same grouping column

Hi all
I have a requirement to find different recordings of the same grouping columns have value different values in the columns, for example:

WITH

Data (G1, COL)

AS

(

SELECT 'A', '456' FROM dual UNION ALL

SELECT 'A', '345' FROM dual UNION ALL

SELECT 'A', ' ' FROM dual UNION ALL

SELECT ' 'B, 123' FROM dual UNION ALL.

SELECT ' 'B, 123' FROM dual UNION ALL.

SELECT ' 'B, 123' FROM dual UNION ALL.

SELECT 'C', "789' FROM dual UNION ALL

SELECT 'C', "789' FROM dual UNION ALL

SELECT 'C', "" the DOUBLE

)

Select g1, pass data

Ideally for G1 = A, the NECK should have that a single value across records ' 456 'or ' 345'. So I need to check the values in NOT NULL of the COL where, for any value of G1, we have different values of the colonel G1 = 'B' is perfectly fine, so I don't need. G1 = C is good too and I'm not worried about it. I only need these entries when the neck was non-empty value / NULL not different for the same value of G1.
So expected out put is

WITH

Data (G1, COL)

AS

(

SELECT 'A', '456' FROM dual UNION ALL

SELECT 'A', '345' FROM dual UNION ALL

SELECT 'A', "double UNION ALL

SELECT ' 'B, 123' FROM dual UNION ALL.

SELECT ' 'B, 123' FROM dual UNION ALL.

SELECT ' 'B, 123' FROM dual UNION ALL.

SELECT 'C', "789' FROM dual UNION ALL

SELECT 'C', "789' FROM dual UNION ALL

SELECT 'C', "the DOUBLE

)

Select g1,

Col

de)

Select g1,

Col,

Count (distinct trim (col)) at the NTC (g1 partition)

from the data

)

where NTC! = 1

and trim (col) is not null

/

G COL. NO.
- ---
A 345
A 456

SQL >

SY.

Time Dimension type to different values in the attributes - Bug or feature?
Not sure if this is a bug or a feature.

But if there is a time dimension hierarchies. You have the option of specifying different values for member attributes in different hierarchies.

For example.

A hierarchy has MIN_ID for its members and uses MIN_END_DATE for its end_date

Hierarchy B has MIN_ID for its members and uses SESS_END_DATE for its end_date

According to this message and a comment by David Greenfield:

Gender issue when several mappings for different hierarchies

"You try to map the same attribute, SORT, on different columns in two hierarchies? In other words, what do you expect the same Member to have different values for the attribute in the two different hierarchies? If so, then this is a problem because a member must have the same value for the attribute independently of the hierarchy. »

Unlike a dimension of the user, a time dimension seems to allow this and it seems to work as expected. Behavior in this case is the difference between a user and the time dimension?
Your description of the structure of the dimension is very clear, but I have a question about system requirements. When you say you want to the time running from 17:00 to 16:59, do you mean that the calculation must spand day? for example "5:00 PM: Jan 1, 2012" to "4:59 PM: 2 Jan 2012".» If so, then this you is impossible by making a loop only the dimension of time-seconds. Or do you really mean it must wrap around the same day. for example "5:00 PM: Jan 1, 2012" at "11:59 PM: 1 Jan 2012", then again to "00:00 AM: 1 Jan 2012" to "4:59 PM: 1 Jan 2012"?»»»

If you want the calculation for the period of days, then I think you need to spend TIME on the DATE dimension level. You can leave some MINUTES in the second dimension, which can be a dimension of standard user. You must then two levels of the DAY (with different members) in the date dimension - each with a different set of the child. You can assign the TIME_SPAN to the TIME level 1.

I am so tired of this bluetooth problem on my iPhone 6. I am updated to iOS 9.3. Anything I pair with my iPhone must be within 6 "of the phone. What should I do?

I am so tired of this bluetooth problem on my iPhone 6. I am updated to iOS 9.3. Anything I pair with my iPhone must be within 6 "of the phone. What should I do?

looks more like a hardware delivers then one software

vSphere PowerCLI - of different values on the Allocation of resources and 5.1

Hello
I have a situation where I was trying to follow in one of our virtual machines that could miss the unlimited check mark on the allocation of memory to the title resources. In doing so, I was in a situation where powerCLI shows values different vsphere for memory and cpu shares until I removed and add the check unlimted box and clicked on OK.
I guess my question is double.
1. How will I know if the virtual machine variety is actually being allocated resources properly when there is this difference.
2. If it's just a property not being pulled to the PowerCLI correctly I presume I can ignore it? If this isn't the case, you know another way to have it acknowledged correctly so I must not go through a hundred servers again and manually perform this procedure.
Finally, if there is a real problem with the assigned resources hurt if I go through this process and now everything gets double maybe will we have problems with guests not being is not able to manage the new distributions?
That's what it looks like, top is a bad server and down is a server has been fixed.
Name: Server01
MemoryMB: 4096
NumCpu: 2
VMResourceConfiguration: CPUShares: Normal / 1000 MemShares: Normal / 25600
Name: Server02
MemoryMB: 4096
NumCpu: 2
VMResourceConfiguration: CPUShares: Normal / 2000 MemShares: Normal / 40960
Hope it makes sense.
Thanks for any idea you may have.
Shane
PS... is it just me (IE11) or can't you copy and paste in the editor on this community?

There is indeed a minor flaw in the value of the shares shows PowerCLI.

To begin with, what you get for fixed levels are well documented.

See the distributions of resources

Which can be seen in the vSphere for a VM client

It is a virtual machine that has 2 vCPU (2 x 1000)

The cmdlet Get-VMResourceConfiguration to the PowerCLI returns the value that is actually in the VirtualMachine object.

This value does not seem to take into account the fact that the virtual machine has 2 vCPU, while the vSphere client does not seem to take into account of the # of vCPU.

You can check by doing

Get - VM MyVM | Select the Name,@{N="CPU actions; E={$_. ExtensionData.Config.CpuAllocation.Shares.Shares}}

However, if the level of shares is not personalized, the SDK Reference tells us "that if the level is not set to custom, this value is ignored."

See SharesInfo

In conclusion, the cmdlet PowerCLI is correct, it returns the value that is there, but this value is irrelevant unless the level is set to Custom.

PS: I seem to have no problem to copy and paste in the editor.

Have you tried with another browser?

different values of the parameters $ GV on DB LINK

Hello
I am trying to understand the values of the settings, I see on a database is different when it is asked of other databases via a DB connection.
DB_1:
SQL > select name, value, display_value, isdefault parameter $ v whose name like ' % date % ";
NAME VALUE DISPLAY_VALUE ISDEFAULT
nls_date_language                                                                                                 TRUE
NLS_DATE_FORMAT FORGERY of the HH24:MI:SS HH24:MI:SS MM/JJ/AAAA/MM/JJ/AAAA
fixed_date                                                                                                                TRUE
DB_2:
SQL > select * parameter $ gv@TO_DB_1 where name like ' % date % ";
NAME VALUE DISPLAY_VALUE ISDEFAULT
nls_date_language AMERICAN AMERICAN TRUE
NLS_DATE_FORMAT FORGERY of the HH24:MI:SS HH24:MI:SS MM/JJ/AAAA/MM/JJ/AAAA
fixed_date                                                                                                                    TRUE
DB_2:
SQL > select NAME from v$ database@TO_DB_1;
NAME
DB_1
I'm under binary 11.2.0.3.
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE Production 11.2.0.3.0
AMT for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
Thank you Checking out. !
-AAG
Post edited by: AAG

Hello

NLS parameter can be defined by environment variables, and they depend on the way you connect:
- When you connect locally to the server (not SQL * Net, no listener), the Oracle session inherits the client environment
- When you connect remotely to a service registered statically on the listener, the Oracle session inherits the environment that began the listener
- When you connect remotely to a service registered dynamically on the listener, the Oracle session inherits the environment who started the database
Kind regards

Franck.

Map of the same different value of the column in different column based on conditio
Hi experts,

We source as Oracle tables and target also Oracel tables.

Source
--------
Column1 | Column2 | Column3

Goal
---------
trg1 | trg2

I need to
Insert the value of Column1 in trg1 where column2 = 'xxx '.
Insert the value of Column1 in trg2 where Column3 = "yyy".

After giving the conditions on mapping, the where conditions become clubed with and I get a different value to what is excluded. As the same way, I have the same scenario for most of the columns in my target table. Suggest me how do.

Thanks in advance.
Hello

to do everything in a single interface without performance issue you could do a join like this

Source.col2 = source2.src1 or Source.col2 = Source2.src2

This mapping and

Target.trg1

CASE WHEN Source.col2 = Source2.src1 THEN
Source.Col1
ANOTHER NULL
END

Target.TRG2

CASE WHEN Source.col2 = Source2.src2 THEN
Source.Col1
ANOTHER NULL
END

How to reduce the memory usage when loading bitmaps from the library?

When I use BitmapData.loadBitmap () to load an image in the library, then attachBitmap() to add it to a MovieClip it takes a lot more memory instead of just to have the same image inside a MovieClip statically in a frame in the timeline.
The dispose() function not only deletes the BitmapData object but also destroys the bitmap previously attached inside the MovieClip, so it cannot be used to free the memory.
Is - this how it is supposed to be or there at - it another way to dynamically attach bitmaps with comparable rightly memory use have them on stage?

You can do the same thing with movieclips: create a bitmapdata instance and use the draw() method to overlay as needed.

Combo box list, but we had to save different values in the database
11g, ADF, ADF BC, MySQL

I have a drop-down list box in one of my pages with a fixed list that is bound to a field on one of my VO

The drop-down list box displays the States as such: IA - Iowa, MI - Michigan... etc.

The database column concerned, is a VARCHAR (2), so I'll have to just save "IA", instead of "IA - Iowa".

I don't want to have a 'State' database table that correlates "IA" to "IA - Iowa".

What is the best practice to have the user select the value in the fixed list and then having my code to manipulate the value before saving it to the db?

Thanks in advance,

Joel
Yes.

Create the VO with two attributes (value and label) - call it your search VO

In the original Version that you want to change, use the search VO to lead the list of values.

http://download.Oracle.com/docs/CD/E14571_01/Web.1111/b31974/bcquerying.htm#CHDHBDDE

John

Sync Center memory usage 99% Machine locks for the duration of the synchronization session

I have a 64 bit Windows computer and when the computer starts the Sync Center sync process, memory use soon jumps to 99% and the system hangs essentially for some time before allowing the normal recovery tasks. I uninstalled Antivirus for test purposes. Unfortunately, it's difficult to follow what happens as I'm basically locked as long as the hard drive activity light is pretty solid. We are a large amount of data to sync offline, but if this will make the computer unusable for such a sum of time 10-15 minutes, it becomes a problem. Thank you.

Hi Nobilis,

1 - is the problem only occurs when you use Sync Center?
2. don't you make changes to the computer before the show?

Method 1

I suggest you to run the fixit from the following link:

Difficulty of Windows system performance slow computer problems
http://support.Microsoft.com/mats/slow_windows_performance/

Method 2
I suggest you perform the clean boot and check if the problem persists.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

Different value for the element on the page on different areas on the same page?

Hi all:

I use APEX 4.0.6 and I have a page with 4 regions and each of the region shows a classic report which SQL is very similar to the other:

for example

For region 1, the SQL looks like select * from history where status = 'A ';
For region 2, the SQL looks like select * from history where status = 'B ';.
For region 3, the SQL looks like select * from history where status = 'C ';
For region 4, SQL looks like select * from history where status = ';

To optimize database performance, I like to create a page element called p_status_value on this page and using the syntax of following link for the SQL statement for all 4 regions:

Select * from history where status =: p_status_value;

However, I need this page element value is dynamically change for each region:

For region 1, p_status_value = "A";
For region 2, p_status_value = 'B ';.
For region 3, p_status_value = 'C ';
For region 4, p_status_value = ';

Also, I need hide this element of the page on this page.

Can someone show me how to do this?

Thanks in advance!

Kevin

Published by: Kevin Zhang on May 10, 2011 13:03

Then I would have 4 regions, with each region report, create a box item in each area, called PXX_REGION_VALUE and then your request is:

select * from history where status = :PXX_status_value_X; (XX for page # and X for region #).. The database engine will crunch through the query and your dashboard will work fine..

Thank you,

Tony Miller
Webster, TX

If vegetable oil is made of vegetables, what is baby oil made of?

If this question is answered, please mark the thread as closed and assign points where earned..

Point size of a paragraph indicating the different value in the definition

Hello!
I have two paragraphs on a page of my InDesign document. The size of the text of the two of them is 18pts. On the via the script, when I access the pointSize field in the two paragraphs (paragraph points pointSize object), it now returns 18.
But if I check in via para.appliedParagraphStyle.pointSize, he returned to 38.
Anyone could explain this behavior, or what fundamental error that I do?

See fly the answer of the day here-

Place multiple images in a container (rectangle, oval, polygon)

Change the size of the object by entering different values in the transform Panel

In CS5, I want to make a shape half his size. I tried to enter 1162.5 px 1.5 and it seems that its size. What is this story. HAVE to do? Maybe it is just the end and I don't think correctly and I'm embarrassing myself, but when I enter 1162.5 px.5 she grows. Shouldn't that say HAVE to do half her size?
Thank you.

How to use "Ctrl/CmdEnter" to maintain proportions (same relative change in W and H). ?

There is no need to do this in the new versions of Illustrator. (Jacob uses version 10. You are using version 15.) If you want to limit the proportion, just make sure that the link between the H and l fields is active.

I learned my creative icon! follow-up with contat Adobe support... 40 minutes, I am waiting on the phone. What should I do?

Adobe is not yet able to answer their phone... WTF

Hi Jeff,

So last night I wait for 2 hours and 40 minutes (with my phone on speaker) and I had once

can someone help me so well and so professionally that I just kept a large

the number memory. Basically, he had to clean the CC Setup program. Really

a nice guy!

Thanks for the follow-up message.

Eric

Wednesday, January 14, 2015, at 14:08, Jeff A Wright, [email protected]>

My laptop speakers stopped running so I was watching a movie on the phone. What should I do?

Laptop speakers stopped working everything suddenly while I was watching a movie. I checked with external speakers, and it works. I tried the mic check and it works. I went to properties and it shows that this device is working properly. In properties, I did click right and all active. While doing the test in the properties no sound comes. I checked the driver and it says that the driver is correct. Is it possible that my laptop's built-in speakers are turned faulty. Laptop is two years old. I use windows vista Home premium. Please help me on this problem.

Hi pranaydesai,

· Did you the latest changes on the computer?

Method 1

See the link below and run the troubleshooter of audio playback, check if it helps.

Tips for solving common audio problems

http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

Method 2

If the previous step fails, then manually, download and install the latest audio drivers for the card its installed on the computer by visiting the sound card manufacturer or computer manufacturer's website and check if that helps.

Updated a hardware driver that is not working properly

http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

Memory usage - of different values on the phone vs what iTunes says I

Similar Questions

Maybe you are looking for