Menu formatting Spry works do not correctly in DW CS6

Similar Questions

• horizontal menu doesn't work does not correctly

  I've made a few changes to the style of the menu bar horizontally. When I put in my page index and watched the page in the browser menus drop are not displayed. Any suggestions on what I am doing wrong?
  
  index.htm
  
  
  

  Changed the level of the index and it works now.

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  Original title: System reports the NIC does not properly

  Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  As none of the problems are met with connection network, do I ignore this warning or try to update the driver?

  Hi eucalyptussurfer,

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  Please see the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• [Solved] Windows 7 start menu search work does not correctly

  Hello
  I hope you guys can help me with the following:
  As I removed (through the registry) libraries in Windows 7 (see notice at the bottom) I can't find common things such as 'cmd' 'Notepad' or 'calc (tab'ulator)' find the programs installed in the search from the start menu, but CAN FIND paths like C:\Windows\system32\cmd.exe. Research in the Solution Explorer window is not affected by this problem. If I try to search for example "cmd" in the search for the start menu it says "no element not corresponding to your research." When I click on "See more results" it shows This popup (click here). So I restored the registry keys, but it will not work correctly again.

  FYI: I tried several things to solve this problem but never fixed it:
  -see if the Windows Search service and Indexing Service are running (> Yes, auto-start)
  -rebuild the index (it indexes 2 additional partitions on my hard drive, C:\Windows, C:\Users, C:\Program Files (x 86)------and standard folders like the Start Menu)
  -Uninstall and reinstall Windows Search and Indexing Service (via Windows turn on or off features in the control panel > programs and features)
  -delete the folder C:\ProgramData\Microsoft\Search
  -Tools Microsoft FixIt
  -Troubleshooting (also the problems search and indexing)
  -create new user account

  I forgot something? If so, I'll tell you as soon as I remember.

  Can anyone help me please with my w/out problem suggesting to reinstall Windows?

  I use Windows 7 x 64 HomePremium SP1 on a
  AMD Athlon 64 X 2 Dual Core Processor 4200 + 2.42 GHz with
  4.00 GB of RAM and 500 GB HARD drive (partitioned into 3 disks).

  Notice:
  In order to delete the libraries I removed/edited these registry keys:
  [HKEY_CLASSES_ROOT\CLSID\ {031E4825-7B94-4dc3-B131-E946B44C8DD5}]
  [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\ {031E4825-7B94-4dc3-B131-E946B44C8DD5}]
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Desktop\NameSpace\ {031E4825-7B94-4dc3-B131-E946B44C8DD5}]
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\ {2112AB0A-C86A-4ffe-A368-0DE96E47012E}]
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\ {491E922F-5643-4af4-A7EB-4E7A138D8174}]
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\ {7b0db17d-9cd2-4a93-9733-46cc89022e7c}]
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\ {A302545D-DEFF-464b-ABE8-61C8648D939B}]
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderDescriptions\ {A990AE9F-A03B-4e80-94BC-9912D7504104}]
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel]
  "{031E4825-7B94-4dc3-B131-E946B44C8DD5}" = -.

  I found a solution by myself.
  If you have the same problem I had (really the same with above registry keys), just download this file: https://www.mediafire.com/?s4bt0447gk426r6 inside you will find 3 .reg files:
  -to restore the registry keys and resolving the problem of search in the menu start
  -through libraries in the start menu folders 'normal '.
  -to cancel the passage of libraries in normal files.

  To have no problem trying to merge "undo_rem_libs.reg", first give yourself permissions (full control!) of the HKCR\CLSID\ {031E4825-7B94-4dc3-B131-E946B44C8DD5} key by right-clicking on it > permissions... > advance > owner (tab) > click on your username > OK > again once, click your user name (this time in the 'group or user names') > check 'Allow' in the full control row > OK.
  That's all! Now you can merge the .reg for restoring above file (see problem) removed key strings with the just installed new Windows 7 original data.

  The other .reg files in the archive must be explicit.

  / Edit:
  NOTICE: this works on all versions 32 and 64 bit of Windows 7 (not tested on Windows 7 Starter).

• Menu accordion spry link does not

  I built a menu accordion spry using Dreamweaver CS5. I noticed that the menu accordion navigation labels cannot be linked to pages. See the Overview of link in the menu accordion and notice that it doesn't not goes not to "overview.html" I added in the code. What I am doing wrong?

  Thank you. Any help is greatly appreciated.

  I see this in your css spry file - you could try to remove the two entrances to the user to select

  * NOTE: * This rule uses -moz-user-select and -khtml-user-select properties to prevent the * user from selecting the text in the AccordionPanelTab. These are proprietary browser * properties that only work in Mozilla based browsers (like FireFox) and KHTML based * browsers (like Safari), so they will not pass W3C validation. If you want your documents to * validate, and don't care if the user can select the text within an AccordionPanelTab, * you can safely remove those properties without affecting the functionality of the widget. */.AccordionPanelTab {     background-color: #FFF;     border-bottom: dotted .5pt gray;     margin: 0px;     padding: 6px;     cursor: pointer;     -moz-user-select: none;     -khtml-user-select: none;     font-family: Georgia, "Times New Roman", Times, serif;     font-size: 9pt;     background-image: url(../images/mykcurve_expand.gif);     background-position: right;     background-repeat: no-repeat;
  

• Firefox doesn't work does not correctly on Windows 10

  Well, I've upgraded to Windows 10 and since then, Firefox is not working properly (not not display graphics, google sites won't load do not, etc.), I tried uninstalling and reinstalling several times, I even waited for the new update... None of them worked. I read something about security certificates, saying I had to import them to Firefox, but the certificate that he mentioned did not exist in my computer. I have also disabled hardware acceleration, cleared my cache, even deleted my profile from my computer, all to nothing does not. It is sad to see the attached screen. (A text-only screen saying: "Firefox + Windows 10.) Perfect set")

  I hope you guys can resolve this problem as soon as possible. If this is happening to me, it happens to a lot of people.

  Did you secure yourself certificate errors? If Yes, do you use Avast, BitDefender, ESET or Kaspersky?

  If you do, we can give specific suggestions.*

  If this is not the case, a further 10 Windows users questions are report is that they were added to a family and their Firefox has been the subject of parental controls that causes seemingly random crashes. Try to turn off the parental control of Microsoft (or are not part of a family): http://windows.microsoft.com/en-us/windows-10/turn-off-microsoft-family-settings

  * For Avast, you can disable the part numerical analysis of Web Shield. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Keyboard not working does not correctly earns 10

  Hello

  I have an Aspier 5332 OS 10 pro windows, the keyboard does not work properly. Working scroll not working, mouse pad moves the cursor, but listen to select something opens the context menu . It just doesn't feel good. Selection of stuff, feels that it is necessary to click the button twice.

  Before OS update the mouse used alps touchpad. Device Manager says its now mouse compatible ps/2

  The device manager says that it has installed the most recent drivers.

  Very annoying. After searching on the web, this seems to be a big problem. All the solutions to this?

  Thank you

  Found a driver Alps is compatible thank you. http://www.iteegra.com/Acer-Aspire-5332-touchpad-not-working-Windows-10/

• Microsoft mobile mouse 3000 works do not correctly under Vista

  I have a mouse Microsoft 3000, which is less than 3 months old. I replaced the battery. I used the reset button. However, the mouse will not turn on gree. indicating that the mouse works. I saw this question already on the Microsoft answers site. ILO is unable to find the solution. Can you help me?

  Hi Instructor4216,

  I recommend you to try the steps in the articles below. You can exclude what you have already tried.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

  If the problem persists, you get your mouse replaced.

  http://support.Microsoft.com/kb/326246/

  I hope this helps.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The mouse scroll wheel doesn't work does not correctly?

  Win 7, Microsoft Wireless Mouse 5000
  Everything worked fine but I had to reformat & return my computer again the conditions of the plant.  I have add the correct software for my mouse.  Now, when I use the scroll wheel, it moves the screen a full coming soon page (spreadsheet, word processing, etc.).  The unique thing is that I can say that she does so ONLY with products at Microsoft (Excel & Word so far), with any other software, it seems to work as it should (a few lines at a time).  No one knows what is the cause?  Help please.

  Thanks in advance... Bob

  Hello

  1. have you checked if the problem occurs with a different mouse?
  2. don't you make changes on the computer before the show?

  
  You can try the steps provide in the supplied knowledge base articles and check if that helps:
  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398
   

• WIFI doesn't work does not correctly after driver update

  I have a DESIRE 4 laptop 1023tu with operating system Windows 8 PRO. My WIFI works does not properly after the update drievr.

  Problems...

  1. When you try to connect to a wifi hotspot the quick adapter turns off and allows the card instantly

  2. after connected, sometimes no internet access and the problem turns off only after reconnecting to the netwrok after setting off.

  If the update doesn't work not for you then do as I explained in my previous post and roll back to the previous driver. This philosophy can be applied to all updates.

  If there is no pressure or emerging reason to update to your PC or laptop works just great... do not update. (this is especially true when it comes to an update of the BIOS)

  For your question #2, the problem could be your wireless (modem, router or access point) which causes the connection dropped.

  Best regards
  ERICO

• BlackBerry smartphones HELP! Ball control and keys doesn't work does not correctly!

  I have the curve 8330 and when I put in my unlock code and press the trackball, it acts as if im entering additional keys. When I finally get into the phone and try to press on the trackball, in its action, as if I am pressing the asterisk key. It does not correctly read the keys and is to register them as another key! Help pleaaase!

  This looks like what I've seen several times on a device with moisture damage.

  Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered.

  Really, it is more common than you think.

  1 the battery immediately! Do not turn on your BlackBerry device.

  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)

  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).

  3. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  * Suggestions on your BlackBerry in a warm dry place (open, with battery):

  • Place the BB in a container of dry uncooked rice, and then you can also place it in one of the locations mentioned below.
  • On top of all heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  • On the dashboard of your car on a day sunny

• Captivate 9 sensitive works do not correctly on WordPress

  Hello
  
  I don't know if anyone can help me. We are new with adobe captivate 9 and have been playing with reactive nature projects. We want this to work on our Web site we use LearnDash to publish our course.
  
  I spent most of the day yesterday on the adobe support who said they don't have any expertise in WordPress and therefore cannot advise if it will work or not.
  
  We have created http://mtdelearning.co.uk/test-2/ - a sensitive project provided by adobe for the tests. If you view it on an iPad or iPhone it does not seem right however adobe have placed on this one: http://www.varunweb.tk/cp/index.html which is not a WordPress site and it works great.
  
  Adobe advised to open the project directly rather than through iFrame. Anyone have an idea how we can do it, rather than by iFrame. Currently, that's how I'm integrating the session:
  
  "< div class ="aspect-ratio - 4 x 3"> < iframe src="/cp9_sessions/test3/index.html "width ="1080"height ="810"> < / iframe > < / div >
  
  Thank you very much
  
  Jenny
  
  

  A player of LMS normally uses a sort of frameset if the page that displays the content to the INSIDE of the frames set to play.  This allows the LMS to 'listen' calls JavaScript that makes the content to the outside world, or in this case, for the LMS.

  Some LMS using framesets.  It seems that your LMS uses an iFrame in a normal web page.  Either it should be to listen to the calls to the SCORM API.

  If you simply change the code to call the index.html file of the course directly from a link on your web page in WordPress, then set it to target _new, it should open the html course in a different window.  However, unless that link is made through your LMS in a way that sets up the SCORM API normal communication, your course not send results everywhere and the LMS will not be able to pick up and track the interaction of the user.  It is therefore a bit of a catch 22.