message returns server timed out: own yellow page loading problem happens

Similar Questions

• ESX Server timed out when I try to enter the license server in the CR

  Hi all

  I have a problem with the addition of two new ESX servers in our virtual Center.

  Let me give you a brief overview:

  We have 5 servers ESX and virtual Center Server.

  All servers are in a single Cluster (Cluster 01)

  Now, we want to use Virtual Desktop Infrastructure and for this reason, we bought another 2 servers (blades).

  I installed from scratch with ESX 3.5 Update 4.

  I did a second Cluster in our VC (Group 02) and add the two.

  I configured the network settings and storage, everything went very well, shoot when I want to point to our license server, whenever I get an error message from our VC. Operation timed out and my settings when not accepted. No matter if I get the IP address or FULL domain name. BUT I can ping our server to ESX Server licenses, so I'm not sure if this is some sort of DNS issue or not.

  Another note: our first 5 ESX servers where ESX Server Standard license.

  Our new ESX servers where an ESX Server VDI license. I used the CD to install ESX normal, because I have not found any VDI install special files.

  I see all licenses in the Administration view in our VC, so I think our license file is not corrupted.

  Things I've done so far:

  Renewal of license, start stop server, esx Server license installed twice from scratch

  I have no more ideas, I hope someone could help me with this problem.

  According to your image, you have 0 agent licenses virtual centre-left to allocate to new hosts.  What might happen, is that the agent is not properly installed on the new servers.  Connect to ESX servers.  Make sure that you can test the virtual Center by domain name server FULL and hostname, not only by intellectual property.  From your RESUME, ping your esx server fqdn and the host name.

  Also, check the file/etc/hosts on your esx server and make sure that the entries are tiny.

  -KjB

  VMware vExpert

• Dynamic action - fire on Page Load problem

  Greeeting,
  
  I created the report with dynamic action event = page loading and action = submit. Scope of the event = Bind,
  But he is permanently on the page, and I want to submit once...
  
  How I manage... created example, please click the link
  
  http://Apex.Oracle.com/pls/Apex/f?p=20294:3:1276651806269601:

  Hello
  >
  Earlier you said:
  Sales page 1

  Page 2 sales detail

  sales page items are rate and identity of product name.

  Name of the product on page 1 is related to retail sales page 2.
  >
  How? This relationship is not obvious to your query.
  >
  Now, you say:
  Parameters:
  1 - the date
  2 - date
  3 - choose the area

  >

  You logic is rather mixed up. That is what you want to achieve? What are the default values for the 3 parameters, if any? What value to Page 2 is used when browsing Page 1?

  Two wrongs don't make a right. Then first give up to the DA who Sumbit Page when loading the Page and focus on the fundamental question related to your logic.

  The amended motion proposed below is NOT WHAT YOU NEED for YOUR CONDITION, but I'm posting it so that you can at least get the running report and then work to correct your logic.

  SELECT SS.OUTLET_ID,
    SS.CAT_ID,
    SS.ITEM_CDE,
    SS.ITEM_NME,
    SUM(DECODE(RETURN_IND,'N',ITEM_QTY,'Y',ITEM_QTY*-1)) QTY,
    SUM(DECODE(RETURN_IND,'N',ITEM_QTY,'Y',ITEM_QTY*-1)*ITEM_RTE) AMT,
    O.OUTLET_NME
  FROM
    (SELECT OSM.OUTLET_ID,
      PI.CAT_ID,
      PI.ITEM_CDE,
      PI.ITEM_NME ITEM_NME,
      OSM.RETURN_IND,
      OSD.ITEM_QTY,
      OSD.ITEM_RTE
    FROM OUTLET_PRICE OP,
      OUTLET_SALES_MASTER OSM,
      OUTLET_SALES_DETAIL OSD,
      POS_ITEM PI
    WHERE OSM.OUTLET_SALES_MASTER_ID = OSD.OUTLET_SALES_MASTER_ID
    AND OSM.OUTLET_ID                = OSD.OUTLET_ID
    AND OSD.OUTLET_PRICE_ID          = OP.OUTLET_PRICE_ID
    AND PI.ITEM_ID                   = OP.ITEM_ID
    /* AND OSM.OUTLET_ID                = :P2_SELECT_OUTLET
    AND OSM.CONSIDERED_DTE BETWEEN :P2_FROM AND :P2_TO */
    AND OSM.OUTLET_ID                LIKE NVL( :P2_SELECT_OUTLET,'%')
    AND OSM.CONSIDERED_DTE BETWEEN NVL(:P2_FROM,TRUNC(SYSDATE)-1) AND NVL(:P2_TO,TRUNC(SYSDATE))
    UNION ALL
    SELECT OSM.OUTLET_ID,
      PI.CAT_ID,
      PI.ITEM_CDE,
      PI.ITEM_NME ITEM_NME,
      OSM.RETURN_IND,
      OSD.ITEM_QTY,
      OSD.ITEM_RTE
    FROM OUTLET_PRICE OP,
      OUTLET_SALES_MASTER OSM,
      OUTLET_SALES_DETAIL OSD,
      ITEM I,
      ITEM_CATEGORY IC,
      POS_ITEM PI
    WHERE OSM.OUTLET_SALES_MASTER_ID = OSD.OUTLET_SALES_MASTER_ID
    AND OSM.OUTLET_ID                = OSD.OUTLET_ID
    --AND OSM.OUTLET_ID                = :P2_SELECT_OUTLET
    AND OSM.OUTLET_ID                LIKE NVL(:P2_SELECT_OUTLET,'%')
    AND OSD.OUTLET_PRICE_ID          = OP.OUTLET_PRICE_ID
    AND OP.ITEM_ID                   = I.ITEM_ID
    AND I.CAT_ID                     = IC.CAT_ID
    AND IC.TEMP_ITEM_ID              = PI.ITEM_ID
    /* AND OSM.CONSIDERED_DTE BETWEEN :P2_FROM AND :P2_TO */
    AND OSM.CONSIDERED_DTE BETWEEN NVL(:P2_FROM,TRUNC(SYSDATE)-1) AND NVL(:P2_TO,TRUNC(SYSDATE))
    )SS ,
    OUTLET O
  WHERE SS.OUTLET_ID = O.OUTLET_ID
  GROUP BY SS.OUTLET_ID,
    SS.CAT_ID,
    SS.ITEM_CDE,
    SS.ITEM_NME,
    O.OUTLET_NME
  ORDER BY ITEM_NME
  

  See you soon,.

• Gmail keeps giving me page loading problem

  The page is not redirecting properly

  Firefox has detected that the server redirects the request for this address in a way that will never end.

     This problem can sometimes be caused by disabling or refusing to accept cookies.
  

  Delete the history fixed thank you and have a nice day

• Simultaneous Manager timed out waiting for the output postprocessor

  Hello
  
  I am facing this error for the first time:
  
  After processing the request failed with the error message:
  Simultaneous Manager timed out waiting for the post-processor of output at the end of this request.
  
  I went through the log of the OPP and that:
  
  [05/08/09 16:00:19] [UNEXPECTED] [49106:RT4628739] java.lang.reflect.InvocationTargetException
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:324)
  at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:624)
  at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:421)
  at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:233)
  at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
  at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
  at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1657)
  at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:967)
  at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5888)
  at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3438)
  at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3527)
  at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
  at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
  Caused by: java.lang.ThreadDeath
  at java.lang.Thread.stop(Thread.java:630)
  at oracle.apps.fnd.cp.opp.OPPRequestThreadManager.terminateThread(OPPRequestThreadManager.java:207)
  at oracle.apps.fnd.cp.opp.OPPTerminateCommand.execute(OPPTerminateCommand.java:45)
  at oracle.apps.fnd.cp.opp.OPPServiceThread.processMessage(OPPServiceThread.java:240)
  at oracle.apps.fnd.cp.opp.OPPServiceThread.waitForMessages(OPPServiceThread.java:227)
  at oracle.apps.fnd.cp.opp.OPPServiceThread.mainLoop(OPPServiceThread.java:128)
  at oracle.apps.fnd.cp.gsf.BaseServiceThread.run(BaseServiceThread.java:135)
  
  I went through the various articles and notes in the metalink:
  
  I tried increasing the values in the following profile options to their default values in 700 900
  
  Simultaneous response time: OPP
  
  Waiting period of concurrent processes: OPP
  
  but no change, can someone tell me how to decide how many seconds must be used for the profiles that is to say based on parameters, etc.
  
  Strangley than what was going on when the data is over and for this combination of setting:
  
  The total number of records in the output is approximately 5000
  
  Please guide if I missed something.
  
  Best regards
  Mahi

  You had a bad code.

  changed and he sent.

  can you check and let me know?

• Save not finished. message is 'Timed Out' error 0 x 81000101

  Upward does not end on the external drive. Received message is 'Back Up Timed Out'. What this means and how do I enable backup complete a copy of the C drive information in its entirety. Error message is 0 x 81000101

  Hello

  Thanks for posting in the Forum the Microsoft community.

  According to your description, I understand that you are unable to perform a backup, and you receive error message like 0 x 81000101.

  To better understand the question, please answer the following questions:

  1 are you connected to a domain network?

  2. do you use the Windows backup feature to backup?

  3. What is the size of the data you are trying to add or backup?

  4. have you made changes on the computer before this problem?

  5. have you installed third-party backup utility?

  6. what kind of backup do you run?

  Come back with more information to help you better.

  Follow the mentioned methods:

  Method 1: Check if these two services are running:

  A. Volume Shadow Copy service

  B. backup Windows

  Also to ensure that their dependency services are running. You can check this information from services.msc. Follow the steps below to check the services.

  (a) go to start and type services.msc in the search box.

  (b) search for both services.

  (c) make a right click on the service, one at a time.

  (d) select Properties.

  (e) go to start type.

  (f) select Auto

   

  Method 2:

   

  Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right-click cmd, and then click Run as administrator.

  (b) at the prompt, type chkdsk /f /r and press to enter.

  (c) try to save and check the result.

  For more information on 'Check a drive for errors' please visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: For security, try to manually back up data before a disk check. Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 3:

   

  Step 1:

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

   

  Step 2:

   

  Also try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, followstep 7 in the link provided to return the computer to a Normal startup mode.

  For more information on the "backup of your files' visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.

• Server responds only in time, FTP is not supported on this server [connection timed out after 15001 millseconds]

  Hello

  I repeatedly get the message "the server responding is not in time, FTP is not supported on this server [Connection timed] out after 15001 millseconds" when you try to download via the built in Adobe Muse FTP uploader. I've been in contact with my host who is hostbaby, and they said my ip address was blocked but when they unlock it is the same thing. I tried to change the automatic method and also to change the passive mode, but not joy.

  Any thoughts on how I can fix this?

  Have you checked with any FTP client to access your server host separately just to confirm if they are blocking access?

  You can try any as Filezilla FTP client to confirm access to the server with the same identifiers.

  Thank you

  Sanjit

• Can not verify the account to download the free app Always get "Session Timed Out" message.

  Can not verify the account to download for free enter or just about always "Session Timed Out" message.

  Please describe in more detail what you are doing, and when it fails.

  Do you use any type of VPN or RAM to access resources outside of your region?

  Are you connected to WiFi when you do?

• I worked on the Web site of our Church and all of a sudden my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?

  The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.

  • [918127/questions/918127]
  • [918028/questions/918028]

• When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#Cure please!"

  When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#".
  Cure please!

  Do you find it with other browsers?

  If not, then try asking using Firefox for a.

  That you get with other sites with Firefox?

• Problem with Nightowldvr. Get the error message 'Connect server out of time'.

  Problem with Nightowldvr cannot connect to the mail server

  I install Nightowldvr and he'll send automated E-mail messages, but it stops the error message "server connection out of time", using the SMTP format

  Bill

  Contact the Nightowldvr support.

• vSphere high availability 'Élection' fails at 99% 'operation timed out' to 1 of the 2 hosts

  Hello

  We had a system with 1 host ESXi 5.1 with local disks.

  Now, we install redundancy by adding a 5.5 U2 ESXi host and a device of vCenter 5.5.

  After having installed and any addition to vcenter, we went the ESXi 5.1 to 5.5 U2 ESXi. The SAN works correctly (vMotion works on the own NETWORK card).

  Now, if I try to activate the high availability, both servers will install the HA Agent and start "Election".

  All the warehouses of data (4) on the SAN are chosen for the HA heartbeat, response of isolation is "keep it turned on" by default.

  A server will always be this process done, and the other will keep "elect" until it reaches 100% and errors on the operation "election timed out.

  I've seen this problem on both servers, so I think that the 'master' elected does not have the problem, only the "slave".

  I have checked these items and executed, but not worked:

  VMware KB: Reconfiguration HA (FDM) on a cluster fails with the error: operation timed out

  -The services were running

  VMware KB: Configuration HA in VMware vCenter Server 5.x does not work, error: Operation Timed out

  -All the MTU has been set at 1500

  VMware KB: VMware High Availability Configuration fails with the error: unable to complete the configuration of the ag of HA...

  -the default gateway is not the same on the two hosts, but I fixed that. There is no itinerary changes. HA the setting is "leave power." After correction and deactivation/reactivation HA, the problem is always the same.

  VMware KB: Check and reinstall the correct version of the VMware vCenter Server agents

  -J' ran "Reinstall ESX host management agents and HA on ESXi" agent of HA, and I checked that it was uninstalled and reinstalled during the reactivation of HA.

  CP /opt/vmware/uninstallers/VMware-fdm-uninstall.sh/tmp
  chmod + x /tmp/VMware-fdm-uninstall.sh
  /tmp/vmware-FDM-uninstall.sh

  I did this for two guests. This fix makes the problem of the election and I was still able to run a HA test successfully, but when after this test, I turned off the 2nd Server (in order to test the PA in the other direction), HA has no failover to 1 and everything remained low. After pressing 'reconfigure HA', the problem of the election appeared again on 1 hosts.

  Here are a few extractions of newspapers:

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:03 192.27.224.138

  -vSphere HA agent is healthy info 29/11/2014 22:02:56 192.27.224.138

  -L' availability vSphere HA of that host State became Master info 29/11/2014 22:02:56 192.27.224.138

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:01:26 192.27.224.138

  -vSphere HA agent is healthy info 29/11/2014 22:01:22 192.27.224.138

  -L' availability vSphere HA of that host State became Master info 29/11/2014 22:01:22 192.27.224.138

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:03:02 192.27.224.139

  -Message "host vSphere HA State" on 192.27.224.139 changes from green to red info 29/11/2014 22:02:58 192.27.224.139

  officer of HA - vSphere for this host has an error: vSphere HA agent may not be properly installed or configured WARNING 29/11/2014 22:02:58 192.27.224.139

  -L' availability vSphere HA of that host State became info error of initialization of 29/11/2014 22:02:58 192.27.224.139

  -L' availability vSphere HA of that host State became election info 29/11/2014 22:00:52 192.27.224.139

  -DSMD3400DG2VD2 data store is selected for the storage heartbeat controlled by the HA agent vSphere on this info host 29/11/2014 22:00:49 192.27.224.139

  -DSMD3400DG2VD1 data store is selected for the storage heartbeat controlled by the HA agent vSphere on this info host 29/11/2014 22:00:49 192.27.224.139

  -Firewall configuration has changed. 'Enable' to rule the fdm value successful.  29/11/2014 info 22:00:45 192.27.224.139

  -L' availability vSphere HA of that host State became not initialized info 29/11/2014 22:00:40 reconfigures vSphere HA 192.27.224.139 root host

  -vSphere HA agent on this host is disabled info 29/11/2014 22:00:40 reconfigures vSphere HA 192.27.224.139 root

  -Reconfigure HA vSphere host 192.27.224.139 operation has timed out.     root of HOSTSERVER01 29/11/2014 22:00:31 29/11/2014 22:00:31 29/11/2014 22:02:51

  -Configuration of vSphere HA 192.27.224.139 operation has timed out.     System HOSTSERVER01 29/11/2014 21:56:42 29/11/2014 21:56:42 29/11/2014 21:58:55

  Can someone give me please with help here?

  Or the extra things that I can check or provide?

  I'm currenty running options.

  Best regards

  Joris

  P.S. I had problems with cold Migration during the implementation of the SAN. After setting up all (vMotion, ESX upgrade), these problems have disappeared.

  When you search for this error, I came to this article: KB VMware: VMware vCenter Server displays the error message: unable to connect to the host

  And this cause could make sense, since the server vCenter changed and IP addressing has been changed during the implementation.

  However, in the file vpxa.cfg, the < hostip > and < serverip > is correct (verified by using https://< hostip > / home).

  Tried this again today, no problem at all.
  

  P.P.S. I have set up several of these systems from scratch in the past without problem (if it is an 'upgrade').

  OK, so the problem is solved.

  I contacted Dell Pro Support (OEM offering the license) and they checked the logs (fdm.log) and found that the default IP gateway could not be reached.

  The default gateway is the ip address by default host isolation, used by HA.

  Because it is an isolated production system, the front door provided proved only for future purposes.

  Now, I've changed the default gateway address of management on the switch plugged into both hosts, namely the ping requests.

  This solved any problem.

• Operation Timed out - vSphere API

  Hello

  This follows the validation of my colleague Tony Gent on Snap Mount LUNs will.

  I've coded successfully a routine to call queryunresolvedVmfsvolumes in a few test environments and to manipulate the result for the host will, but critical on-site routine returns with a message 'operation timed' out after 100 seconds.  I tried the navigation to the CROWD and call the method and does not return the expected results but takes a little less than 4 minutes.  I don't see the value of operating time is configurable anywhere and the method has no parameters and is not the task.  I looked at the box VC that I sign too and also the host I use the method on.

  Does anyone know if the value of timeout is configurable (I think I'm screwed, if it isn't!)

  see you soon

  MikeL

  The problem is that cmdlet Get-View creates a new instance of VimService as parameter values of Id are not owned by the customer.

  But if you change $view_object. Property of Client.VimService.Timeout and immediately after that call the $view_object method, that works too long, it should work.

  That is to say:

  ...
  $hostview = Get-VMHost myHost | Get-View
  $dsmanager = Get-View $hostview.ConfigManager.DatastoreSystem
  
  $dsmanager.Client.VimService.Timeout = -1  # Infinite timeout
  $dsmanager.QueryUnresolvedVmfsVolumes()
  

  / Yasen

• Podcast Connect Error: Read timed out

  Hi all

  I am quite new to podcasting and has just published my first episode. Now, I submitted the podcast to itunes and got the "approved podcast" - message from last night. So my podcast is listed on itunes now and works absolutly fine.

  But when I check on it to 'Podcasts Connect' I get an error message "connection to your feed was interrupted because of a connection timeout error. Read timed out ".

  For your understanding: I use a host externally (www.podhost.de), which should be implemented for all data in the RSS feeds from http://headlock.podspot.de/rss.

  When I downloaded the information, everything seemed to go well. Now I'm as stuck in the middle between labor and does not not :-)

  Is just a matter of time, because the cast has gotten only approved? Check the iTunes on the RSS feed on a regular basis and as a result, this error can be temporarily?

  Thanks for your help in advance, it is much appreciated!

  I was able to susbcribe and check it into Podcasts Connect and http://castfeedvalidator.com/ without problems. A time-out would be the cause of your server is slow to respond, but you can just hit a temporary problem that can be anywhere in the internet connection between Apple and your server. As long as it works in iTunes when you subscribe, I shouldn't worry about this. Temporary hiccup in internet connections is very common.

• "We could not complete your iTunes Store request. The network connection timed out. »

  Every hour or two iTunes for Mac displays a modal dialog box with the error 'we could not complete your iTunes Store request. The network connection timed out. "This interrupts any activity like playing airplay or order with the Remote App on iOS.

  I can identify no problems of networks. If I go to the iTunes Store deliberately I have no problem. I have no download waiting on the iTunes store. I try not to buy anything from the iTunes Store. I have no reason to connect to the iTunes Store.

  There is no update unapplied for iTunes. There is no update unapplied for Mac OS X. There is no update unapplied for my router. There is no network connection problem to any site I found.

  I can't find all the messages that allow me to debug this problem. The support page to If you can not connect to the iTunes Store - Apple supported provides no useful information.

  What this error message should tell me? What problem I actually feel?

  I noticed that sometimes.  I just quit iTunes and restart.  The problem reoccur not (until it is once again).  But for me, it's months between occurrences.