Messages authenticated in the newspapers about WLC

Similar Questions

• [Cisco ACS] 11036 the RADIUS Message Authenticator attribute is invalid

  Hello

  I had a lot of Cisco AP related to Cisco WLC 2.

  On each WLC, I configured a primary and a secondary RADIUS server.

  RADIUS servers are Cisco ACS 5.2.0.26 (patch 10)

  ACS primary and secondary configurations are synchronized.

  There is no problem between primary rules WLC and Cisco ACS (primary and secondary).

  When secondary WLC asks primary Cisco ACS, I get this error "11036 the RADIUS Message Authenticator attribute is not valid.

  WLC secondary contacts automatically secondary Cisco ACS and it works fine.

  Cisco ACS description for this error: "this can be reason of mismatched shared Secrets."

  The two Cisco ACS are synchronized, so I should have the same error on them...

  Why primary ACS generates this error?

  Thanks for your help,

  Patrick

  Patrick: The shared secret mismatch could be on the side WLC, not on the side of the ACS.

  Make sure that the shared secret of the radius primary server is configured correctly on the secondary WLC.

  HTH

  Amjad

  Rating of useful answers is more useful to say "thank you".

• Site ads continue to use the proxy settings and I get the message "Authentication required" time and time again. I have stop advertisements to use my proxy settings?

  I have put my school proxy settings and use them very often. On some Web sites, ads continue to use these proxy settings (probably to show me ads based on my preferences or I don't know), and I get the message "Authentication required" time and time again before the end of the loading page. It's annoying because if I have several tabs open and am currently on another page while loading the website with the ads, I'm brought back to this page to authenticate. Can I get asked 3 times to authenticate while this page loads, and it takes forever to load because of this. I don't want to disable my proxy settings because I use it very often. I tried to uncheck the "Accept cookies from Web sites" and nothing happens, it's always the same. I want these ads to stop going through my proxy settings. How do I do that?

  Hello

  You can try the add-on Adblock Plus . In addition to subscriptions, you can manually add URL patterns or click on an ad to add a filter.

  Support

• I have a unfinished message in "drafts". When I click on "drafts", message shows on the screen but is 'refractory', which means that I cannot work on it or send it. What to do about it

  Windows Mail

  I have a unfinished message in "drafts". When I click on "drafts", message shows on the screen but is 'refractory', which means that I cannot work on it or send it. What

  on this subject - step by step?

  Thank you

  Bogdan

  E-mail address is removed from the privacy *.

  In addition, how to activate cookies? I have accounts at multiple Web sites (like netflix, allrecipes... etc.), and whenever I go I need to sign my username, password...

  I tried to follow the instructions on the Windows online help, but they are useless - I must have a university degree in computer science to be able to follow this high technology

  languauge and navigate a web of Byzantines 'options', a crazy maze that could only be born in the sick minds of these stupid high school dropouts

  artists such as Bill Gates, Steve Jobs (RIP)... and the rest of them.

  If you, my tutor, happens to adore these punks, please disregard my harsh words and just help me.

  Thank you once again!

  I love the "punks", but must take over your computer and learn some things about it to use it properly.

  For cookies, in Internet Explorer go to tools | Internet Options (or control panel |) Internet Options). Privacy and things together in the middle and you can adjust which sites to allow.

  For the issue of Windows Mail, you can have the database corruption so try to compact and repair the database (see www.oehelp.com/WMUTil/), and then see if that helps any.  Try to restart also.  If you still have the problem, then look for the antivirus interference (disable e-mail analysis - see www.oehelp.com/OETips.aspx#3) and then delete your e-mail account, close and reopen WinMail and then add it back back.  Also, instead of using air streams is to use the file | Save as and save the unfinished on the desktop message when you dial the it.

  See if that helps.

  Steve

• BlackBerry smartphones getting only call the newspapers in a 8530 message passing?

  I hate having my email in the message center so I removed it. The only other option is to add text that I already have a text message on the cover of the blackberry. So, how can I add my call logs? I don't know what else to add, in addition to that, if this is not possible. Thank you!

  Hi Njacksons94

  Thanks for your Post... !!

  Please select the green button and you will get all the newspapers call out there & now press Menu (sign of BB) > Option > Call logging

  Here, select all calls. Exit and save.

  Please cofnirm, if this work for you.

• Ask about the segregation of database access by using the authentication of the os in the windows environment

  Hello

  I have a question about the segragation of database access using authentication of the os (like sqlplus "/ as sysdba") in the windows environment. Let me briefly explain my requirement: -.

  Assume that you have two DBA viz DBA1 and DBA2 and 4 resideds of databases in a windows server say A, B, C and D.Now I want to configure it in a way if DBA1 opens a session on the server then it may connect to the database A and B using only OS and DBA2 authentication can connect to database C and D only use OS authentication.

  Please let me know how to configure for this requirement.

  Version of the database is 11.2.0.3

  Hello

  This doc is 11.1 but I guess it's the same in 11.2 roles on Windows and administering external users

  You create a group ORA_SID_DBA and doing it this way - in recent years I have done but it used to work ok...

  See you soon,.

  Harry

• I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

  Hello

  To resolve this problem, you will need to disconnect muse and connect again.

  Here are the steps to the disconnection of Muse:

  1. help > log out.

  2. Once signed on restart Muse (please sign using Adobe ID if she invites to connect)

  You should be all set.

  Concerning

  Vivek

• I downloaded the free app Adobe Content Viewer, but when I try to connect, I get an error message "authentication failure". What should I do to fix?

  I downloaded the free app Adobe Content Viewer, but when I try to connect, I get an error message "authentication failure". What should I do to fix this?

  Did you go digitalpublishing.acrobat.com, connect with the Adobe ID and accept the terms of use? If this is not the case, do using a computer. You can't do this from a mobile device. This is not an automatic process, you must do it manually.

• v ('P101_USERNAME') the null value in the message authentication process

  We hit a problem after the deployment of our application APEX 3.1 on the customer site. The value of v('P101_USERNAME') in our message authentication process is zero on our customer site, but not in our development environment.
  -The two environments are 11.1.0.6 DB with APEX 3.1.0.00.32 on windows.
  -P101 being the default login screen.
  -l' user connects using a custom authentication scheme that ends with success.
  v ('APP_USER') has the correct value (in uppercase)
  -We receive "ERR-10740 unable to perform custom processes post-auth" because an unexpected exception is triggered due to a null user name that we can detect using debugging PL/SQL code.
  -export the application and the source code are the same.
  
  The message authentication process refers to v('P101_USERNAME') which is then transmitted to a couple other processes, including a Web service call and a search function as active directory. The reason why we use it is because it is not transformed to UPPERCASE as with APP_USER - we need spend the exact user name in our post processing of authentication that can be mixed case.
  
  For some reason, it's just no longer works in a different environment - that someone has encountered this problem? I read on a question referring to v ('APP_USER') after a 3.1 update, but it doesn't seem to be a solution.
  
  Any help would be appreciated.
  
  Ian.

  Try to disable the process to clear the cache on the login page. If that contributes to recover at least a process to clear the password element.

  Scott

• The authentication of the client at the edge of Collaboration / MRA

  Hello

  Could someone help with the following question?

  When a Jabber client to get authenticated?

  My understanding is that when a Jabber Internet device accesses (to connect) the highway-E, only the server (Expressway-E) is authenticated (using the public certification authority in the operative part of Jabber).

  Is this correct? If so, the user of the device Jabber/get authenticated when the device attempts to save with the CUCM?

  Thanks in advance,

  / Bertin

  Dimension Data.

  In the case of deployment of Jabber/CUCM/Highway, during the initial connection between the Jabber client and server side of the highway, there is an exchange of key/cert/handshake that creates a secure between communication channel. At this point customer Jabber solidly passes the credentials to the edge of the highway and happening at the Expressway kernel, the kernel then provides the credentials to the server CUCM (that defies in turn compared to its local user database authentication or LDAP, if it is in use) then returns a message authenticated core Expressway , which sends it to the side of the highway, which tells in turn the Jabber client, it has successfully authenticated.

  This leaves out some deeper technical details, but does that answer your question?

  Also, above statements may be different for a deployment of VCS (not Expressway series) as there are has several authentication options. It would also be about endpoint and video Jabber for TelePresence and not 'normal' Jabber points.

• Client is not authenticated to the Service of the inventory of VMware

  Dear friends,

  I am facing many problems with our vCenter. Its has started with lack material and discovery tab, I am unable to connect using the web client. I tried to dig the cause but could not get anywhere as several articles/discussion found.

  I get the error message saying "The Client is not authenticated at the Service of the inventory of VMware". Something that I found while troubleshooting is in the identity source SSO under the local host, the abbreviated name of the remote vCenter (DC) is added and as default instead of the local name. Is this normal? We also have a MRS. in our infra, FYI.

  I join DS newspapers which is full of information of identification/powers invalid source error no valid/unknown which I'm not quite understood.

  Can someone help me with the problem?

  Thank you!

  Best regards

  Hari.

  Because of studies and solved my problem with the article below.

  Re - around the and the reinstatement of VMware vCenter Server 5.1 / 5.5 and components (2033620) | VMware KB#register vCenter Inventory Service with vCenter Single Sign-On

  
  

  Thank you!
  

• SSL mutual authentication using the Oracle stored procedure

  Hello
  
  DB version:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
  
  Is possible to perform mutual authentication SSL uses the Oracle stored procedure?
  I read articles and forums saying that it is not a good approach to call the Web service using the Oracle procedure (and I don't know if it's even possible authentication using procs). But I would like to know if it's possible and how.
  
  In other is words there a way to incorporate the client certificate information into a procedure that calls a Web service.
  
  I read the articles to do it in JAVA or .net. But please advice how we can achieve using Oracle procedures.
  
  Thank you.

  934451 wrote:

  Is possible to perform mutual authentication SSL uses the Oracle stored procedure?

  To learn more. SSL what for?

  Oracle PL/SQL only supports client standard TCP sockets. However, interface for HTTP, Oracle PL/SQL also supports HTTPS - which requires the certificates of authentication of the server to be stored in a portfolio of Oracle web and used during the transmission via HTTPS. See the code example {message identifier: = 1925297} for more details.

  I read articles and forums saying that it is not a good approach to call the Web service using the Oracle procedure (and I don't know if it's even possible authentication using procs).

  Forums and articles written by idiots. For idiots.

  And no, I'm not to embellish my response to this pitch that you met. It is false. It is written by ignorant people who don't know ANYTHING about the use of Oracle and PL/SQL. And feel free to forward my response to these idiots. They find me here if they want to argue...

  As an example of how to call a web service, see {message identifier: = 10158148} and {message: id = 10448611}.

• Messages not in the third side

  Until about a week ago in the Panel of the Inbox, I saw the info from messages in the second part and the messages themselves in the third side and I went down the list the next message clinked appeared... Now I have just the information in the message and double-click on it to see the messages that appear in a new window. I don't know how this has changed and can not find a way to return on says Thunderbird release 24.6.0, if this change relates to the new Thunderbird, and then how to get back to a previous version that works for me?

  Press F8 to turn on the messages pane.

• Why to start Firefox message appears that "the color palette has been changed to Windows 7 Basic"?

  I am running Windows 7. When Firefox starts the message that arrives the color scheme has been changed to Windows 7 Basic. The message then continues to talk about the incompatible program. When I close Firefox to the colors return to normal. It has just begun to happen.

  Check that you are not running Firefox in compatibility, or with a reduced screen resolution mode.

  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

• How can I fix a problem of Message Authentication Code

  Firefox just make me upgrade to 13.0.1 and now I can't find on google, yahoo, ixquick and startpage. Whenever I do, I get this:

  The secure connection failed

  An error occurred during a connection to startpage.com.

  SSL received a disc with an incorrect Message Authentication Code.

  (Error code: ssl_error_bad_mac_read)

  I tried to reinstall, install older versions and troubleshooting pages, but nothing works. I can go to Web sites that I have Favorited or those that I have links too, but I can't just use the search bars. All I have this problem and know how to fix?

  Who issued the certificate?

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".

  Let Firefox recover the certificate: "Add Exception"-> "get certificate".

  • Click on the "view..." button. "and inspect the certificate and the Coachman, who is the sender.

  You can see more details like the intermediate certificates that are used in the details pane.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked