Messages do not bind my direction to map app

Similar Questions

• Virtual disk "Hard disk 3' is a direct access mapped lun that is not accessible

  I am currently in the process of upgrading our cluster of ESX 4.0 U1 to 4.1. In the process, I came across a physical MSCS 2 with RDM cluster. I stop the VMs and vmotion can them between the hosts of 4.0. Now as soon as I update hosts 4.1 I cannot vmotion the VMs to these 4.1 hosts. The error I get is: "virtual disk"drive hard 3' is a direct access mapped lun that is not accessible". I found an article KB http://kb.vmware.com/kb/1016210

  who speaks ensuring that LUN number is the same in the presentation of all ESX hosts and I checked, it is the case, moreover, as I said vmotions does not always work for guests, that I have not yet updated. I have not tried anyone all LUNS and re - introduce, don't know if I should try that. Looking for suggestions.

  Thank you
  greendxr

  You have to poweroff the node, remove the RDM drives, migrate the virtual machine, and then add again in RDM disk.

  RDM LUN must be on all hosts.

  André

• Configure Apache HTTP Srvr for WLS12c error - "address already in use: make_sock: could not bind to address 80.

  Hello the Experts of Oracle.

  I already have

  1. installed the Apache HTTP Server (with libraries)
  2. Downloaded the Plugin of Apache WLS12c
  3. copied the plugin files into the appropriate directories.
  4. Modify the httpd.conf (see below)

  At the present time, I try to start the Apache HTTP server and runs in an unexpected error.

  WHY APACHE ATTEMPTS TO LISTEN ON PORT 80. ?  I've SPECIFIED the PORT 8888

  Question: How to go beyond the error.   -| "Address already in use: make_sock: could not bind to address 80 '

  My server is 192.168.1.21.  In my view, that it has ESTABLISHED processes.  Yet, he reports, that it cannot start.

  

  Here is the content of the httpd.conf file.  My customizations are in Red.

  #

  # This is the main Apache HTTP server configuration file.  It contains the

  configuration directives # that give the server its instructions.

  See # < URL: http://httpd.Apache.org/docs/2.4/ > for more information.

  # See especially

  # < URL: http://httpd.Apache.org/docs/2.4/mod/directives.html >

  # for an analysis of each configuration directive.

  #

  # Do NOT simply read the instructions here without understanding

  # what they do.  They are there only as advice or reminders.  If you do not know

  # consult the online documentation. You have been warned.

  #

  # Configuration and logfile names: If the file names that you specify for a lot

  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the

  # server uses this explicit path.  If filenames do * not * start

  # with "/", the value of ServerRoot directive is preceded by - both "logs/access_log".

  # with ServerRoot set to "/ usr/local/apache2" will be interpreted by the

  # Server as "/ usr/local/apache2/logs/access_log", considering that "/ logs/access_log".

  # will be interpreted as "/ logs/access_log".

  #

  # ServerRoot: The top of the directory under which the server tree

  # configuration, error and the log files are kept.

  #

  # Do not add a bar slash at the end of the directory path.  If you point

  # ServerRoot to non-local disk, remember to choose a local drive on the

  # Directive Mutex, if based on mutex files are used.  If you want to share the

  # ServerRoot even for several demons httpd, you will need to change to

  # PidFile less.

  #

  ServerRoot "/ usr/local/apache2.

  #

  # PidFile: The file in which the server should record its process

  ID # when it starts.

  #

  PidFile ' / usr/local/apache2/logs/httpd.pid '.

  #

  # Mutex: Allows you to set the mutex mechanism and the mutex file directory

  # for individual mutex, or change the default global values

  #

  # Uncomment and change the directory if mutexes are based on files and the default

  # mutex file directory is not on a local disk or is not suitable for some

  # other reason.

  #

  # Default Mutex: newspapers

  #

  # Listen: Allows you to bind Apache to specific IP addresses and/or

  ports #, instead of the default value. See also the < VirtualHost >

  directive #.

  #

  # Change this to listen on specific IP addresses below for

  # prevent Apache glomming on all related IP addresses.

  #

  # Example-> look 12.34.56.78:80

  # Listen api.astcorporation.com:8001

  Listen 8888

  #

  # Dynamic Shared Object (DSO) Support

  #

  # To be able to use the features of a module that was built as a DSO you

  # duty place corresponding 'LoadModule' lines at this location until the

  # directives that it contained are actually available _avant_, that they are used.

  # Modules statically compiled (those listed by "httpd-l") is not necessary

  # to be responsible here.

  #

  # Example:

  # LoadModule foo_module modules/mod_foo.so

  #

  LoadModule authn_file_module modules/mod_authn_file.so

  #LoadModule authn_dbm_module modules/mod_authn_dbm.so

  #LoadModule authn_anon_module modules/mod_authn_anon.so

  #LoadModule authn_dbd_module modules/mod_authn_dbd.so

  #LoadModule authn_socache_module modules/mod_authn_socache.so

  LoadModule modules/mod_authn_core.so authn_core_module

  LoadModule modules/mod_authz_host.so authz_host_module

  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module

  LoadModule modules/mod_authz_user.so authz_user_module

  #LoadModule authz_dbm_module modules/mod_authz_dbm.so

  #LoadModule authz_owner_module modules/mod_authz_owner.so

  #LoadModule authz_dbd_module modules/mod_authz_dbd.so

  LoadModule modules/mod_authz_core.so authz_core_module

  LoadModule modules/mod_access_compat.so access_compat_module

  LoadModule auth_basic_module modules/mod_auth_basic.so

  #LoadModule auth_form_module modules/mod_auth_form.so

  #LoadModule auth_digest_module modules/mod_auth_digest.so

  #LoadModule allowmethods_module modules/mod_allowmethods.so

  #LoadModule file_cache_module modules/mod_file_cache.so

  #LoadModule cache_module modules/mod_cache.so

  #LoadModule disk_cache_module modules/mod_cache_disk.so

  #LoadModule cache_socache_module modules/mod_cache_socache.so

  #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so

  #LoadModule socache_dbm_module modules/mod_socache_dbm.so

  #LoadModule socache_memcache_module modules/mod_socache_memcache.so

  #LoadModule macro_module modules/mod_macro.so

  #LoadModule dbd_module modules/mod_dbd.so

  #LoadModule dumpio_module modules/mod_dumpio.so

  #LoadModule buffer_module modules/mod_buffer.so

  #LoadModule ratelimit_module modules/mod_ratelimit.so

  LoadModule modules/mod_reqtimeout.so reqtimeout_module

  #LoadModule ext_filter_module modules/mod_ext_filter.so

  Request_module modules/mod_request.so #LoadModule

  #LoadModule include_module modules/mod_include.so

  LoadModule modules/mod_filter.so filter_module

  #LoadModule substitute_module modules/mod_substitute.so

  #LoadModule sed_module modules/mod_sed.so

  Modules/mod_deflate.so deflate_module #LoadModule

  LoadModule mime_module modules/mod_mime.so

  LoadModule log_config_module modules/mod_log_config.so

  #LoadModule log_debug_module modules/mod_log_debug.so

  #LoadModule logio_module modules/mod_logio.so

  LoadModule env_module modules/mod_env.so

  #LoadModule modules/mod_expires.so expires_module

  LoadModule headers_module modules/mod_headers.so

  #LoadModule unique_id_module modules/mod_unique_id.so

  LoadModule setenvif_module modules/mod_setenvif.so

  LoadModule modules/mod_version.so version_module

  #LoadModule remoteip_module modules/mod_remoteip.so

  #LoadModule modules/mod_proxy.so proxy_module

  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule

  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule

  Modules/mod_proxy_http.so proxy_http_module #LoadModule

  #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so

  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so

  #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so

  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule

  #LoadModule proxy_express_module modules/mod_proxy_express.so

  #LoadModule session_module modules/mod_session.so

  #LoadModule session_cookie_module modules/mod_session_cookie.so

  #LoadModule session_dbd_module modules/mod_session_dbd.so

  #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so

  #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so

  #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so

  #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so

  #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so

  LoadModule modules/mod_unixd.so unixd_module

  #LoadModule dav_module modules/mod_dav.so

  LoadModule status_module modules/mod_status.so

  LoadModule autoindex_module modules/mod_autoindex.so

  #LoadModule info_module modules/mod_info.so

  #LoadModule cgid_module modules/mod_cgid.so

  #LoadModule dav_fs_module modules/mod_dav_fs.so

  #LoadModule vhost_alias_module modules/mod_vhost_alias.so

  #LoadModule modules/mod_negotiation.so negotiation_module

  LoadModule modules/mod_dir.so dir_module

  #LoadModule actions_module modules/mod_actions.so

  Modules/mod_speling.so speling_module #LoadModule

  #LoadModule userdir_module modules/mod_userdir.so

  LoadModule alias_module modules/mod_alias.so

  #LoadModule rewrite_module modules/mod_rewrite.so

  # Added on 23/09/2015 | -enabling reverse proxy requests for users of WLS12c

  LoadModule modules/mod_wl_24.so weblogic_module

  < IfModule unixd_module >

  #

  # If you want httpd to run as a different user or group, you must run

  # httpd as root initially and it will pass.

  #

  # Group / user: the name (or #number) of the user/group to run httpd as.

  # It is generally advisable to create a dedicated and aggregatable for user

  # httpd, as with most system services are running.

  #

  Demon of the user

  Daemon group

  < / IfModule >

  Server configuration # 'hand '.

  #

  # The directives in this section implement the values used by the 'hand '.

  # Server, which meets all demands that are not managed by a

  definition of # < VirtualHost >.  These values also provide defaults for

  # all < VirtualHost > containers you can set later in the file.

  #

  # All these directives may appear inside containers < VirtualHost >,.

  # in which case the value default parameters will be substituted for the

  virtual host of # being defined.

  #

  #

  # ServerAdmin: Your address, where problems with the server should be

  # e-mail.  This address appears on some generated by the page server, such

  # as error documents.  for example [email protected]

  #

  ServerAdmin [email protected]

  #

  # ServerName gives the name and the port used by the server to identify itself.

  # This can often be determined automatically, but we recommend that you specify

  # explicitly to avoid problems during startup.

  #

  # If your host doesn't have a registered DNS name, enter its IP address here.

  #

  Servername 192.168.1.21

  #

  # Deny access to the whole of the file system of your server. You must

  # explicitly allow access to web content directories in other

  blocks of # < directory > below.

  #

  < directory / >

  AllowOverride none

  Need all refused

  < / Book >

  #

  # Note that, from this point forward you must precisely enable

  features special # to be enabled - so if something doesn't work not as

  # you might expect, make sure that you have specifically enabled it

  # below.

  #

  #

  # DocumentRoot: The directory you are going to use your

  documents #. By default, all requests are taken from this directory, but

  aliases and symlinks # can be used to point to other locations.

  #

  DocumentRoot "/ usr/local/apache2/htdocs.

  < directory "/ usr/local/apache2/htdocs" >

  #

  # Possible values for the Options directive are "None", "All."

  # or any combination of:

  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

  #

  # Note that "MultiViews" must be named * explicitly *-'all Options '.

  # is not give it to you.

  #

  # The Options directive is complex and important.  Please see

      # http://httpd.Apache.org/docs/2.4/mod/core.HTML#options

  # For more information.

  #

  Options Indexes FollowSymLinks

  #

  # AllowOverride controls what directives may be placed in .htaccess files.

  # It can be 'All', 'None', or any combination of key words:

  # AllowOverride FileInfo AuthConfig Limit

  #

  AllowOverride None

  #

  # Controls who can get stuff from this server.

  #

  Need of all granted

  < / Book >

  #

  # DirectoryIndex: sets the file Apache will serve if a directory

  # is requested.

  #

  < IfModule dir_module >

  DirectoryIndex index.html

  < / IfModule >

  #

  # The following lines prevent the .htaccess and .htpasswd files to be

  # seen by customers of the Web.

  #

  < files ".ht *" >

  Need all refused

  < / files >

  #

  # ErrorLog: The location of the error log file.

  # If you do not specify an ErrorLog directive in a < VirtualHost >

  # container, error messages related to this virtual host will be

  # logged here.  If you * define an error for a < VirtualHost > log file

  container of #, that host errors will be logged there and not here.

  #

  ErrorLog "logs/error_log".

  #

  # LogLevel: Control the number of messages in the error_log.

  # Possible values include: debug, info, notice, warn, error, crit,.

  # emerg, alert.

  #

  LogLevel debug

  < IfModule log_config_module >

  #

  # The following directives define some nicknames format for use with

  # a directive CustomLog (see below).

  #

  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"

  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune

  < IfModule logio_module >

  # You must enable mod_logio.c use %I and frequency

  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio

  < / IfModule >

  #

  # The location and format of the access (Common Log Format) log file.

  # If you do not have any logfiles access set in a < VirtualHost >

  container of #, they will be saved here.  On the other hand, if you * do *.

  # define per - < VirtualHost > access logfiles, transactions will be

  # logged there and * not * in this file.

  #

  CustomLog "logs/access_log" common

  #

  # If you prefer a log file of access, agent, and referer information

  # (Combined logfile format) you can use the following directive.

  #

  #CustomLog "logs/access_log" combined

  < / IfModule >

  < IfModule alias_module >

  #

  # Redirect: Allows to tell clients the documents used for

  # exist in your server's namespace, but no more. The customer

  # make a new request for the document at its new location.

  # Example:

  # Redirect permanent/foo http://www.example.com/bar

  #

  # Alias: Maps web paths into paths of file system and is used to

  # access content that don't live under the DocumentRoot directive.

  # Example:

  # Alias /webpath/full/filesystem/path

  #

  # If you include a trailing / on /webpath, then the server will be

  # require that he be present in the URL.  It is also likely that

  # duty provide a < Directory > section to allow access to

  # the path to the file system.

  #

  # ScriptAlias: This controls which directories contain server scripts.

  # ScriptAliases are essentially the same as assumed names, except that

  # documents in the target directory are treated as applications and

  # executed by the server on demand, rather than as documents sent to the

  client of #.  The same regulation on flight "/" applies to the ScriptAlias

  # as for the Alias directives.

  #

  ScriptAlias/cgi-bin / "/ usr/local/apache2/cgi-bin /".

  < / IfModule >

  < IfModule cgid_module >

  #

  # ScriptSock: On threaded servers, refers to the access path to the UNIX

  decision # used to communicate with the CGI mod_cgid daemon.

  #

  #Scriptsock cgisock

  < / IfModule >

  #

  # "/ usr/local/apache2/cgi-bin" just need to replace your ScriptAlias

  # CGI directory exists, if you have set up.

  #

  < directory "/ usr/local/apache2/cgi-bin" >

  AllowOverride None

  None of the options

  Need of all granted

  < / Book >

  < IfModule mime_module >

  #

  # TypesConfig points to the file containing the list of mappings from

  # MIME file extension - type.

  #

  TypesConfig conf/mime.types

  #

  # AddType allows you to add or replace the MIME configuration

  # the file specified in TypesConfig for specific file types.

  #

  #AddType application/x-gzip .tgz

  #

  # AddEncoding allows you to have certain browsers uncompress

  # information on the fly. Note: Not all browsers support this.

  #

  #AddEncoding x-compress. Z

  #AddEncoding x-gzip .gz .tgz

  #

  # If the AddEncoding directives above are commented out, then you

  # should probably define these extensions to indicate media types:

  #

  AddType application/x-compress. Z

  AddType application/x-gzip .gz .tgz

  #

  # AddHandler allows you to map certain "manipulators": file extensions

  # No actions associated with the file type. It can be either integrated into the server

  # or added to the directive of the Action (see below)

  #

  # To use CGI outside of ScriptAlias directories scripts:

  # (You will also need to add "ExecCGI" to the "Options" directive.)

  #

  #AddHandler cgi-script .cgi

  # For maps of type (negotiated resources):

  #AddHandler type-plan of the var

  #

  # Filters allow you to process content before sending it to the client.

  #

  # To parse .shtml for server-side includes (SSI) files:

  # (You will also need to add "Includes" the "Options" directive.)

  #

  #AddType text/html .shtml

  #AddOutputFilter INCLUDES .shtml

  < / IfModule >

  #

  # The mod_mime_magic module allows the server to use various boards of the

  content of the file itself to determine its type.  The MIMEMagicFile

  # directive tells the module where the definitions of suspicion.

  #

  #MIMEMagicFile conf/magic

  #

  # Customizable error responses come in three flavors:

  ((# 1) text 2) local redirects 3) external redirects

  #

  # Examples:

  #Error Document 500 "The server made a boo boo".

  #Error Document 404 Missing.html

  #Error Document 404 "/cgi-bin/missing_handler.pl"

  #Errordocument 402 http://www.example.com/subscription_info.html

  #

  #

  # MaxRanges: Number of channels in a Maximum request before

  # return the resource, or one of the extraordinary

  # values 'default', 'none' or 'unlimited '.

  # Default is to accept 200 beaches.

  Unlimited #MaxRanges

  #

  # EnableMMAP and EnableSendfile: on systems that support.

  projection in memory # or the sendfile syscall can be used to deliver

  # files.  Usually, this improves the performance of the server, but must

  # turn off when mounted network is served

  # file systems or if support for these functions is also

  # broken on your system.

  # Default: EnableMMAP, EnableSendfile Off

  #

  #EnableMMAP off

  #EnableSendfile on

  # Additional configuration

  #

  # The configuration files in the conf/extra/directory can be

  # included to add additional features or change the default configuration

  # the server, or you can simply copy their content here and change as

  # necessary.

  # Server-pool management (MPM specific)

  #Include conf/extra/httpd-mpm.conf

  # Multilingual error messages

  #Include conf/extra/httpd-multilang-errordoc.conf

  # Entries to the fancy directory

  #Include conf/extra/httpd-autoindex.conf

  # Language settings

  #Include conf/extra/httpd-languages.conf

  # User directories

  #Include conf/extra/httpd-userdir.conf

  # Info in real time on the applications and configuration

  #Include conf/extra/httpd-info.conf

  # Virtual hosts

  #Include conf/extra/httpd-vhosts.conf

  # Local access to the manual for the Apache HTTP Server

  #Include conf/extra/httpd-manual.conf

  # Distributed authoring and versioning (WebDAV)

  #Include conf/extra/httpd-dav.conf

  # Various default settings

  #Include conf/extra/httpd-default.conf

  # Configure mod_proxy_html to understand HTML4/XHTML1

  < IfModule proxy_html_module >

  Include the conf/extra/proxy-html.conf

  < / IfModule >

  # Secure connections (SSL/TLS)

  #Include conf/extra/httpd-ssl.conf

  #

  # Note: The following text should be present to support

  # start without SSL on platforms without equivalent/dev/random

  but # a statically compiled in mod_ssl.

  #

  < IfModule ssl_module >

  SSLRandomSeed startup builtin

  SSLRandomSeed connect builtin

  < / IfModule >

  #

  # Uncomment on the below to deal with user agents that deliberately

  # violate open standards by abusing DNT (DNT * must * be a specific)

  choice of end-users #)

  #

  # < IfModule setenvif_module >

  #BrowserMatch "MSIE 10.0"; bad_DNT

  # < / IfModule >

  # < IfModule headers_module >

  #RequestHeader unset DNT env = bad_DNT

  # < / IfModule >

  #= WLS 12 c routing Configuration. Seven 2015 =.

  # Added to fix the mistakes of transport of myAST resulting from the use of deprecated SSL 2.0 Mobile Security.

  # The following has been added to activate the reverse proxy requests from users of WLS 12 c-based applications.

  #-8002 port = SSL listener for api.astcorporation.com (managed server)

  # - the port 443 = SSL listener for myast.astcorporation.com (managed server)

  #

  # Phases of deployment:

  API.astcorporation.com:8001/myast # (1).

  # VirtualHost (2) Setup / WeblogicCluster guidelines to register myast.astcorporation.com:443

  # 3-test api & myast

  # 4-regenerate private certificate + all certificates.

  # Minimum nonclustered directive specifies WebLogic IP + port.

  < IfModule mod_weblogic.c >

  WebLogicHost 192.168.1.43

  WebLogicPort 8002

  Debugging now

  DebugConfigInfo WE

  Newspapers/myAst12c_WLS_error_log WLLogFile

  WLS-JSESSION-ID WLCookieName

  < / IfModule >

  # Proxy request per path Note: SetHandler specifies the handler for the plug-in module for the Apache HTTP Server

  < /myast location >

  SetHandler weblogic-Manager

  ErrorPage http://www.astcorporation.com/services/middleware/Middleware_Services.html

  < / location >

  # Added proxy

  ProxyPreserveHost off

  #ProxyPass /api http://API.astcorporation.com:8001 / myast

  #ProxyPass /myast http://myast.astcorporation.com

  I found my answer after I posted.  I'll leave it here to help others...

  The list of all instances of Apache that were started

  • ' ps - ef | grep apache. "

  Kill the persistent process

  

• Look at the maps app will not stop

  When I look for direction in the maps on the watch application, it will not stop after that. I looked for directions to the airport, and then it does not cancel and kept taking me to the airport. I have ensured the application Maps on my phone was not working and he cancelled it but always watch will not stop.

  I tried it yesterday and now today the watch gives me directions to the airport.

  I tried to remove it from the docking, restarted my watch. Watch app from the phone Checked, but nothing works.

  Hello

  To stop your watch directions: open the Maps app on your watch > firmly press the display > press on for policy decisions.

• Why always, I received management is not available when you use maps for the iPhone 6 and I live in the Qatar?

  Why I always get direction is not available when you use maps for the iPhone 6 more?

  Currently I live in the Qatar.

  Hi Alison, Sameh

  The reason why you see directions is not available, it's that for cards of Apple, turn-by-turn directions is not a feature that is available in the Qatar. You can search for places and satellite imagery
  Take a look at the link below for more details on what features are available in the Qatar.

  iOS 9 feature availability
  http://www.Apple.com/iOS/feature-availability/

  Nice day

• Fax and Scan Error - Message could not be sent. Media is write protected

  I have a PC with Windows Vista Ultimate on it.  Turns off user access control.  On the sign as Admin will have all the rights.

  Windows Fax and Scan works very well for a long time.  Had a modem comes to shove, he replaced everything works fine.

  In the last day or two - with no known changes to the system - the system is no longer send and receive faxes.

  It gives me an error-"message could not be sent.  the media is write protected. »

  This happens if I try to send a fax directly from the Windows fax software or if I try to "print" a document by fax.

  When you receive a fax - it gives a similar error.

  It works as records receive faxes are unalterable and, if I look at their properties in Explorer.  I try to uncheck Read-only and it acts like it works only when I get back - read-only is still selected.

  Other times I tried to make changes to access to the files by Windows Fax, fax settings - but it tells me that I have to be logged on as administrator to make these changes and I signed up as an administrator - the only Director on the PC.

  I also removed the Fax profile and recreated.  I think that the question is the property read-only on my directory of fax, but for some reason that seems locked on.

  I also shot the back, rebooted, turned off UAC back, rebooted and tried to change the settings of RO, no luck.

  Any ideas or suggestions would be greatly appreciated.

  Thank you!

  Read-only for folders is normal (mine are).  See if this fix works for you:

  Fax Error: The message could not be sent. Media is write protected

  If the registry change is useful, please let us know.

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• message "Could not reconnect all network drives" is an error

  I am using windows 7 Home premium, with a small local LAN supporting 3 PC.  There are 2 stores connected to the network on the LAN for backup (a device) and multimedia data archives (the other device).

  Lately at the start, I always get the message "cannot re - connect all network drives", but explore can access the network drive and view the contents of files on this subject.  the following image illustrates this case:

  

  Note see the sharing Y: mapped drive that is not connected with a big red X, even though I can access the contents of the folder of this one (pictured above).

  So next, I selected Y: and properties and got the following picture for the reader (bomb box properties coming to slightly overlap the content of the file):

  

  Now it is said nothing in the drive capacity which should contribute to this (25% of space), but pointed out that only the action get properties has managed to change the y to so-called connection not connected (but still available) by a big X red, supposed to be connected, with a green sticker on the drive icon shows now.

  These 2 images were taken less than 3 minutes apart - the timer it took to snapshot screen not connected, crop the image to remove the spaces empty and save them, and then get the properties one and do the same thing.

  The question is - why windows do this?  It is obviously not something wrong with the devices, and even when it allegedly is 'not connected' the drive mapped a share can still provide content of records of levels 2 and 3 to the bottom of the tree.

  Davidk03

  Hello David,.

  You can see the article mentioned below to solve the problem.

  Drive mapped to the network connection may be lost

  http://support.Microsoft.com/kb/297684/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• validation error message is not displayed for an attribute as a list of value of the entry

  Hello world

  I use jdev 11.1.1.7.0

  In my application, I created an entity Obj and Obj employees base table.

  for the attribute JobId , I took the actions listed below:

  1. in the EO staff, I created a validation for this attribute and in some cases the error message returns (the error message is "the salary is not high"):

      /**
       * Validation method for JobId.
       */
      public boolean validateJobId(String jobid) {
  
  
          if (...) {
              return false;
          }
  
  
          if (...) {
              return false;
          }
  
  
          if (...) {
              return false;
          }
  
  
       
          return true;
      }
  

  2. employees Vo, I created a LOV for this attribute (the view accessor is JobsViewObj) and I display the attribute entry of text with a list of values.

  in the jspx page, I drag / drop this attribute as below:

            <af:inputListOfValues id="jobIdId"
                                  popupTitle="Search and Select: #{bindings.JobId.hints.label}"
                                  value="#{bindings.JobId.inputValue}"
                                  label="#{bindings.JobId.hints.label}"
                                  model="#{bindings.JobId.listOfValuesModel}"
                                  required="#{bindings.JobId.hints.mandatory}"
                                  columns="#{bindings.JobId.hints.displayWidth}"
                                  shortDesc="#{bindings.JobId.hints.tooltip}"
                                  autoSubmit="true">
              <f:validator binding="#{bindings.JobId.validator}"/>
            </af:inputListOfValues>
  

  I opened the popup and I select a line in the list and then I click Ok. After that, if the validation method (validateJobId) returns false, the error message ("the salary is not high") must be show to the user. but the error message does not appear. I don't understand why this is happening.

  Can anyone guide me on this problem?

  Concerning

  Habib

  Hello Dario,

  I just found this post: http://andrejusb.blogspot.nl/2013/12/workaround-for-infamous-bug-13626875.html that apply ExceptionMode = immediate adjustment to control the use of data in DataBindings.cpx, then the error message is displayed as I hope.

  Concerning

  Habib

• Why messages do not Contact form

  I have just return a WordPress site/blog (www. kenapexvision. com/blog) void directory in the root directory (www. kenapexvision. com) of the site. Before today, I had built the form using Dreamweaver (spry validation). I adjusted the positioning of fields to better display of WordPress dashboard page and cleaned up the 'advice' and 'spry validation' messages because they do not work on WordPress, and then I put in place using the formmail.php script. I also used a "thank you" page in the script (formmail.php) I had hidden using the plugin "PC Hide page.

  Everything worked perfectly fine while the site was in the subfolder/blog until I moved all the contents of the/blog at the direct root folder. Now anything else works perfectly fine - the pages and all the other links, including the display of the "thank you" page - after submission of comment. However does not deliver the message to the email addresses set up in the formmail.php script.

  Please, what could be the reason for this? I could use a plugin of such form suggested by someone, but I want to use this method (formmail script) until I understand very well how to work the contact form plugins.

  Please I need urgent assistance on what could be the reason why messages are not delivered from the contact form and how I could fix.

  Thank you

  This means that your server does not have access to the file for some reason any.

  You should talk to your hosting company to this topic.

• FMS 3.5 upgrades is not binding to ports 80, 1935

  I installed and ran FMS Development Server 3.5 on my Fedora 15 x 32 for a long time now. Everything works fine. However, recently I discovered on the updates to the server. So I downloaded all the (3.5.2 - 3.5.7)... the latest version I have is 3.5.1... and it works very well. Installation of the new version on the server upgrade works great... and when from the server doesn't give any errors.

  It is said in/var/log/messages:

  Server from...

  Server started (/ opt/adobe/fms/conf/Server.xml).

  However, don't check my IP address binding, it shows no connection to ports 80 and 1935. The server administrator runs successfully because I can see binding to port 1111.

  Whenever I run my test application I used to run correctly on FMS 3.5.1 I can't get a connection.

  So I was wondering whats wrong... why it is not more binding? is there something wrong with my upgrade process? I tried to uninstall some currenltly I have and install the new update... same result.

  I need updates because they contain bug fixes I need to have on my server.

  Thank you

  Thank you vibsgupta for pointing out the PROXY thing... I shouldn't have filled the PROXY value.

  However, this is not the real reason for my problem. The ports are not binding and FMS is not working properly because I use Fedora. Once I switched to CentOS, everything worked like charm out of the box.

  Thank you

• iMessage old messages does not

  1I # keep all my texts people I regularly text would come back on a convo and I wanted to see what they texted me a month ago, but I was scrolling to the top as I normally do and it stopped at some point and charge more.

  Now, I know I didn't delete the text before this point, and I tried with others and it is letting me go up to a year. I tried force closure of the Messages app and restart my phone and nothing.

  What is odd, is that the person in particular messages does not load after a certain point, but all the pictures/gifs, we sent the other still appear in the "Détails" button

  Advice or people with a similar problem?

  Anyone?

• Messages do not work on my iPad 2

  Since IOS 10 appeared, the Messages do not work on my iPad with IOS 9.3.5 2.

  Any solution?

  Can you explain what you mean by "will not work". You can launch the application? What happens when you try to send a message? You get an error message?

• Mark the messages as not junk?

  With the help of 10.11.6.

  I don't see any option to mark legitimate messages as NOT junk.

  What is the trick?

  Drag it to your Inbox.

• iPhone app Messages incorrectly reports that the messages are not delivered

  I send text messages with the Messages app on my iPhone.  I've never had a problem until recently.

  Recently, all of my text messages are marked by a red error message "not delivered".  But the beneficiary is in fact receive these messages.

  I want a solution to this problem (if you have one).

  Here are some additional details:

  * I recently made two changes to my iPhone 6, and I wonder if they are related to my problem:

  1. go to iOS 9.3.5

  2 change my cell number

  * I have T-mobile and I "call wifi" enabled.  Usually, I connect using "wifi-calling."

  Hi adaviding,

  Looks like you are having some incorrect Messages notifications appear on your sent messages. Not too sure if recent changes have something to do with it, but I would check your message settings to check everything is in order, it. You can also take a look at the link below. Even if your messages are sent, you can always follow the steps then the message "not delivered" can be resolved. You can also try a simple reboot of your device.

  Restart your iPhone, iPad or iPod touch

  If you can't send or receive messages on your iPhone, iPad or iPod touch

  Please use the Apple Support communities to post your question. These measures should have your Messages app works as expected. Good day.

  Thank you for using

• How to send an audio message, but not with imessage?

  How to send an audio message, but not with imessage?

  Find another app/service that will allow you to do. Or record a voice memo using the voice recorder application and attach to an SMS.