PS3 internet connection through my Verizon Wireless card

Similar Questions

• get internet connection through another computer...

  Hello

  I would go straight to the point :)

  I have a desktop running windows vista. I have a normal internet connection through a router that connects to the internet on this desktop computer.

  now, I also have a laptop with windows xp and here is what I do. my laptop's wireless was always bothers me, sometimes it connects, sometimes it doesn't work out... so I saw that there is an Ethernet card installed in the laptop with an Ethernet port.

  My question is this:

  I have a lot of Ethernet cables at home and I was wondering if there is a way to get internet to my laptop via the Ethernet port on my desktop, but without needing the desktop computer to be running, cause I only use my laptop these days and my router is too far to connect from my room. I hope you understand my problem. In theory, I think it's possible to do, but I'm not sure how, so please help me on this one. my laptop also has firewire, but I prefer ethernet for some reason any.

  Thank you

  Hello

  Sorry, but you cannot get a connection via another computer if the computer is off.

  I'm not sure that I understand completely the topology.  However, if the office is connected by cable to a router for Internet connection, you can solve the problem by buying a simple network switch.

  You take the cable from the desktop and connect to the switch. Then you plug the desktop and laptop computer at the switch.

  That this switch network does, it divides a cable to feed many computers.

  Example of a switch that can be connected with a cable to a router and feed 5 computers.

  http://www.Newegg.com/product/product.aspx?item=N82E16833166034-

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Can not share the internet connection through Wifi

  Hi all

  I am connected to the internet using an external antenna connected via USB to my mac (WIRELESS n 801.11). I want to share this connection since my mac with other devices, i.e. my iPhone. I use the internet connection through system preferences--> sharing--> sharing internet--> connection on the part of wlan to computers via WIFI and give a name and a password for the wifi settings. When I start the connection icon wifi on the the high watch the arrow menu to the top, but it gives an IP address from 169 auto... etc etc and I can't any traffic to my iPhone.

  I tried to configure IPv4 to use DHCP with a manual (instead of automatic DHCP) address and IP I enter the IP address used in the WiFi, wifi says that it is connected to the name of the internet connection in the shared connection, I opened but once again no traffic to the iPhone. Also tried disabling the firewall, once again nothing.

  I run El Capitan 10.11.2.

  Clues?

  OS X El Capitan: share your Internet connection

• Having trouble with my internet connection through wifi. N600 router is what I think.

  I had some problems with my internet connection recently via my wireless router. I get the little triangle yellow and with the connection at different times and I can't call my local internet provider because it still works when they are open, and then it closes when they are closed. I recently bought a Google Chromecast and some think it might interfere with the connection, but I don't see how. When I reset the modem router and cable by unplugging and plug their return they sometimes get the rear connection but it's annoying not knowing when it will go off again, then come back. A few months before the connection out sometimes but not several times a day. If you need additional information such as the type IP DNS stuff I can get it. Also recently I have updated the firmware of the Netgear if that makes a difference. Thank you!

  Thanks to all who responded. I talked to my ISP and discovered that the modem was abandon the connection because he was old and he sold me a new and things work fine now. Thanks again!

• Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  On Friday, June 8, 2012 14:45:42 + 0000, Ian 213 wrote:

  Need me a firewall if my internet connection through a router. I'm with Virgin and I have a D-Link router

  Your router provides firewall protection, so the need is not the same
  as if you had no a router. There are some who say you need to no.
  all firewall software.

  But my opinion is that you would be a lot safer if you have run a
  router software, and since there is little reason not to, I
  recommend that you do.

  Ken Blake, Microsoft MVP

  I agree.

  @OP Windows XP (SP2 and above), Vista, 7 and 8 all have active firewall software by default.

  There is no need of any 3rd party firewall.

  Some users like running programs such as ZoneAlarm because it warns him from the processes that use the network, and then there is the possibility to deny/allow it on the spot, or deny/allow forever. There may be slight discomfort in the installation, but once it's for all your programs, and then it really can work in silent mode.

  Microsoft Firewall simply leave everything default, but they can be configured manually to block anything outgoing or incoming.

• Cannot get internet connection through wireless network

  I have a Sony VAIO laptop that came with Vista 32 bit and went from 7 Home Premium 32 bit.  I connect to the internet via my Ethernet via a DSL modem with no problems.  When I try to use the edge Intel 4965AGN wireless to connect to my DLink 655 Wireless N Gigabit router, it appears that it connects to the network, but there is no internet connection.  Both the router and the edge Intel have the latest drivers and the encryption is set on AES, WPA2-Personal.  Some additional information:

  I have desktop computer Dell with a DLink USB WiFi and it connects to the network and gets internet

  I constantly get the message from Windows saying: Windows has detected an IP address conflict with another computer on the network.  I restarted the router several times to no effect.

  In network and sharing Center (of course the troubleshooting network said he found nothing) the network appears as a Public and unidentified and it gives me no option to change it to a home network.

  I tried to connect to other networks public wireless (hotspots) and I can't connect it

  Hello

  Something is wrong with the TCP/IP parameters.

  Autoconfiguration IPv4 address:169.254.1 52.88
  IPv4 subnet mask: 255.255.0.0
  Autoconfiguration IPv4 address: 192.168.0.1
  IPv4 subnet mask: 255.255.255.0
  IPv4 default gateway:

  This 169.254.1 52.88 is the IP by default Windows assigns when there is no DHCP server, this isn't a working IP address.

  The second IP address is the IP address of the Wired card. That is why router conflicted reports.

  Configure the two cards for full Auto obtain IP and DNS.

  Then do a WinSock and TCP/IP updating.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh interface ipv4 reset Press enter

  netsh interface ipv6 reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Internet connection with a wired network card Gigabit speed limit

  Can you reach 150 speed Mbps Internet connection on a computer running Win XP SP3 and IE8 with the help of the Gigabit wired network adapter?
  What kind of drivers are required in such a case?
  Currently, I have 150 Mbps of connection, and what I get according to the speed tests is of the order of 60 Mbps with pings of 30 to 60 ms.
  My troubled wired adapter is TP-LINK Model: TG-3269-based Realtek RTL-8169SC chipset and its driver: rtnicxp.sys, v.5.649.0615.2006 (WinDDK) provided by Realtek

  The fact that your Ethernet card is theoretically capable of 1000 Mbps does not mean that everything in the path between your computer and the fiber cable (which is what your ISP based his spec 'speed' on) is capable of the same way.

  For example:

  • What type of cable you are using between the computer and the modem/router... and how long is it?  You did the cable yourself or did you buy it with the connectors already attached?  You must at least Cat 5 cable and attach the connectors yourself is not recommended, unless you have a good amount of experience doing.
  • What brand/model/version of your modem/router?  It has the latest firmware installed?

  You have a second computer that also has a Gigabit network?  If so, check the transfer speed of A computer through the router to computer B (i.e. What is the transfer speed of your LAN, completely apart from the speed of transfer between you and your ISP).  Use a stopwatch and a large file or use a utility such as LAN Speed Test.

  What TG-3269 version do you have?  The current one is V3.

  Assuming you have v.3, you appear not to have the latest version of the driver (though I doubt that's the problem).  The package labeled TG-3269_XP_beta a 5.719.0325.2009 XP driver version.  http://www.TP-link.com/en/support/download/?model=TG-3269&version=v3#tbl_a
  Finally, you may want to think about your connection setting, what is most important for XP and later versions of Windows: http://www.dslreports.com/tweaks and http://www.psc.edu/index.php/networking/641-tcp-tune

• Internet connection through different VLAN

  Could someone help me here please.

  Have a cisco SG500 2 (mode layer 3) configured with 3 VLAN connected to a modem adsl (Trendnet) - vlan voice 1 data, vlan 2, vlan 3 tests.  Routing between VLANs is ok I can ping any device in any vlan and have access to the internet through the vlan 1 but no internet access on the other vlan is the vlan 2 and 3. No ping to adsl, if I plugged in a device in the vlan 2 or 3. My question is do I have a router or firewall in order to provide internet access through all my VLAN or is it possible with the SG500 connected to adsl? a turn on ip Routing and the default route in my SG500, but still no luck. need internet connection for the PC as well as voip devices.

  Thank you

  Hi Paul, the switch performs no NAT function so if your modem is only a modem giving public IP addresses then you would need a router to support the NAT function and support the vlan or the static routes.

  If your modem works as a router, need you a static route on the modem to point to the SVI to the switch to allow the clients of vlan connection to connect to the modem to turn, what makes the internet work.

  -Tom
  Please mark replied messages useful

• Internet connection sharing on a wireless ad hoc network

  Hello

  I have an internet connection of the dongle on my laptop, so I want to use this network on my moblie ad hoc help from my laptop...
  I have set up ad hoc connection.set to the top has been successfully configured but in my laptop have not seen 'no wireless connection available.
  Guys please help me...
  I'm from Surat, Gujarat, India...
  Please get back me as soon as possible if anyone knows this issue...
  my email is * address email is removed from the privacy *.
  Please do what is necessary...

  Maybe this can help.

  http://virtualrouter.codeplex.com/

• I have to start two times to get an internet connection through my ZyXEL_P-2602HWT-F1

  Hello
  I have W7 64 Pro SP1 and it worked well until I get a new modem ZyXEL_P-2602HWT-F1 from my internet provider. In almost the same time that I upgraded W7 SP1 so I don't know which is the cause of this problem I have. If I boot my computer for any reason, I don't get any internet connection. I have to start again.

  My other computers get internet connection immediately as above machine before these two changes.

  Please help me find out what's wrong because it's very irritating.

  PIKO

  Hello

  This looks like a problem of driver for me. I communicate with your access provider which you gave the new modem and ask them where the driver is available for download. I could find this model on the site of ZyXEL either.

• I can determine the amount of traffic to/from my Internet connection through my Airport due to each connected device (both wireless and Ethernet)?

  My traffic internet, as reported by my ISP, has increased significantly in the past few months and I would like to determine where this increase. Devices that potentially connect via my Airport are:

  Wireless:-2 iPad, 2 iPhones, iPods, MacBook Pro

  Ethernet:-desktop HP, Swann CCTV security system.

  Unfortunately, airport routers provide no information on the use of the data of the connected devices, or the product itself.

  I'm not aware of a 3rd party application that would do exactly what you want... but someone else may know, and if all goes well they after.

• How to use my D-Link router to wash away the connection to my external wireless card... Help!

  Here, I'm desperate. OK, here's my situation.

  I am running Windows XP.

  I live as a result of basement of a House and my PC connects fine to the internet wireless on the floor, BUT my XBOX and PS3 do not have a strong enough to reach range. Sometimes it does, but 90% of the time it doesn't.

  My PC connects to the router on the floor using a D-Link Wireless USB card, I got. Nothing complicated but it works.

  Now, is it possible that I can use this connection and share it so that I can plug my XBOX and PS3 into my own own router D-Link so they can infiltrate the connection my PC is using the floor?

  Help, please. I'm running out of ideas and I don't know how to understand this.

  Hello

  The 524 is rather an old device.

  It is a cheap wireless router (better than the 524) that can be flashed and do it.

  http://www.Newegg.com/product/product.aspx?item=N82E16833320026&cm_re=asus_wireless_router-_-33-320-026-_-product

  ----------

  WARNING - I have no connection with brands that manufactures network devices (or other hardware) of any kind, or no connection with the computer hardware vendors. My comments are like a repository based on material I buy with my money.
  It is provided as is without any warranty and not an entitlement.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP6600 drops internet connection, can't print wireless

  My 6600 seems to drop our wifi signal every few minutes.  I can not connect to the printer from any device without wire (iMac, HP desktop or laptop).  I tried the unplug reset twice and entered manually our wifi information.  Any advice on how to improve our connection?

  Thank you dzanotti. Assuming you have a "HP Officejet 6600 e-all-in-one printer - H711a/H711g' is a specific document to: printer does not maintain the wireless connection.
  
  Follow the path of troubleshooting for your operating system and let me know if that helps.

• Problem with internet connection through WIFI A536

  Hello.
  I bought a few days ago the A536 Lenovo.
  It works very well, it will connect to any wifi that I choose without problem, but after a while it stops internet access without obvious reason.
  He remains connected to WiFi, it keeps the same IP address, I have access to the router (ping works, and I can access the router configuration) in my browser but I don't have access to the internet from any application (browser, Skype, Viber, Mail, etc...)

  I tried a different WiFi (public) and has the same problem.
  (My laptop and a phone HTC Wildfire, Guard works well all the time at home)

  If I just simply disable and enable the WiFi antenna, it connects and it works again for 20-120 min

  I tried to restart, disable Firewall (and security), disable all applications that could affect internet access, add applications 'safe list' firewall, I even downloaded "Lenovo companion" but it is impossible to find problems.
  Wifi after awhile stops all communications to the internet.
  It is very annoying, because no internet means no messages, no emails and no calls VOIP programs.

  Anyone has the same problem?

  Is this A536 fault, or is this the Android 4.4.2?
  Is there a solution, or I have to restore my phone while I can and select a different template, such that it is unnecessary in the end I bought?

  Hi Draculas,

  1 check if there is no update firmware
  2. restoration of the factory

  If the problem persists then take to service center.

• Printer maybe Setup connects through USB and wireless printing? or either one or the other?

  I would like to connect my printer to the since my MAC using a USB cable and also be able to use the wireless printing functionality without having to reconfigure my printer.  Is this possible?

  I have a Photosmart 7520

  Hello

  All my tests were using Windows, but I think we can do it for Windows why not Mac. It takes config of the printer as a wireless printer (IE to connect to a network) and install drivers, or applications on OTHER computers and mobile devices.

  Kind regards.