Messaging problem

Similar Questions

• OfficeJet Pro 8600: message "problem with the printer or ink system.

  I replaced the magenta cartridge with a new cartridge genuine HP (end of warranty 2017/01), but now get a message "problem with the printer or the ink system.

  If I restore the old cartridge I get the message that it is empty, but all the other options of the printer are available.

  Online support does not give me any result of solution but suspect there may be a manufacturing error in the new cartridge.

  Does anyone else have this problem or advice?

  Hello
  
  Please click HEREto access the procedure which should solve the problem.

• problem cartridge carrier, get the message "problem paper jam.

  The cartridge holder snaps from one side to the other, and I get the message "problem paper jam.  The problem is new to me.  What should I do to solve the problem?

  Hi Alan,

  The information provided in your post is not sufficient to diagnose your problem. To at least tell you if it's a hardware or software problem, we need to know the name of the printer manufacturer and model number, when exactly meet the problem and what are the symptoms you see.

  Usually, a paper jam is caused by a hardware failure in a printer. So, at this point, I also suggest you go to the website of the manufacturer of the printer support and ask for help on their part. This can help you better.

  Hope that this information gets you started in the right direction. Please respond with more information about the issue so that we could help you more.

• Impossible to save anything in the Gallery of CreataCard, get the error message "problem sending command to the program".

  I'm having a problem when using CreataCard. The program was working fine, but now I can't save anything in the gallery. I get the message "problem sending command to program." I tried to restore to an earlier time, but it does not solve the problem. I deleted the program and re-installed, but it did not help. I can find and click a CreataCard file and it opens in CreataCard.

  Hi O.N. Blevins,.

  I suggest to go to the American Greetings here support site to get help with their software.

  Thank you!

• my computer recently crashed and when I tried to use photoshop, then I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  My computer recently crashed. A fixed it but! When I then tried to use photoshop I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?

  Update or restore your graphics driver.

• When you open Illustrator I get the message: problem loading 'photoshopimport.aip"(connect). I can't access my fonts. I use an iMac 2012 27 "running on 10.10.2 Yosemite

  When you open Illustrator I get the message: problem loading 'photoshopimport.aip"(connect). I can't access my fonts. I use an iMac 2012 27 "running on 10.10.2 Yosemit

  Lucas,

  According to me, which should solve it:

  Open system preferences and go to accessibility. Then select display in the source on the left side list, then check the box transparency reduced.

  It was introduced in this #15 post by TheUlser:

  https://forums.Adobe.com/message/6854594#6854594

  It has been described on this page from Adobe:

  http://capitalmacservice.com/font-preview-working-Illustrator-CS-5-Yosemite-fix/

  It may also depend on the monitor, as shown in the message #29 by Loncar in the same thread.

• After removing the feature new tab, I get a message "problem loading page" instead of a blank page.

  I followed the steps on the help page to remove the feature new tab I hate. So now there is "subject: white ' in the address bar as before, but now, I get this message of 'problem' and I want to just my white back page.

  Hello

  You can try to reset by clicking right on it. You can also try to enter Subject: empty as the value.

• Error message - problem reading disc on Satellite

  I wonder if anyone can help. Was a virus on my laptop satellite scan to home (don't remember the model) 2 days ago, when the screen is blue and it was a mistake long message means the laptop has encountered a problem and stops.

  After that 2 hours, that the cell had not yet arrested so disconnected from the electrical network and removed the battery. To try to restart the computer, an error message pops up saying - CTRL + ALT + DELETE to restart problem reading disk. When I made the order it seemed be restart but then returned to the original statement of CTRL + ALT + DELETE. Tried again and amel and can't stand up boot.

  Someone had this problem before?

  Hello

  It seems that it's not possible access to the HARD drive or it is not possible to read the data on the HARD drive.
  I don't know why it happens, but first of all, you should check the boot sequence in the BIOS. If everything shows ok, so you should try to start form the OS cd and check if it is possible to install the new OS.
  If this is not possible if the HARD drive has a fault and you need to replace.

• Messages & problem of FaceTime on El Capitan

  Nice day.

  Just bought the new MBPro 13 "and tried to compensate for OS X 10.11.4 using my Apple ID, which is used on iMac, old MBPro iPhone and iPad.

  init and iCloud connection smooth, but I could not get into the Messages and FaceTime using the Apple ID. FaceTime just is not responding and keeps connection infinitely, Messages app comes with a (red) error message "an error has occurred with authentication".

  I tried NVRAM reset, iCloud disconnect and connect again, but that did not help.

  Is there a solution to this problem?

  Kind regards

  Rinat

  I have this problem as well.  Just erased HD and re-installed twice and still can't connect to iMessage and FaceTime.  Other iCloud features seem to work well.  I also tried to reset the NVRAM, but that didn't work either.

  MacBook (retina, 12 inch, early 2015)

• Qosmio G20 error message: problem with the cooling system has been detected

  I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

  Error message: Warning: a problem with the cooling system has been detected.

  I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

  When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

  I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

  I would be grateful if someone could give advice if the problem is the fan or something else.

  If the fan is the problem, where I can buy a: i live in the United Kingdom?

  Hello

  I think there might be something wrong with the cooling module and the replacement would be necessary.
  Usually, this should be done by an authorized provider (ASP) in your country.

  Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

  So contact the ASP in your country and ask for later handling.

  By the way; also, you can buy the cooling of the ASP module!

  Good luck

• Qosmio G10-133: cooling module - message problem

  I recently received a message saying that there is a problem with the cooling system. The fan was making a very rough sound, now it's very quiet. I guess I need a cooling Module? Can any Advisor of the part number, the best place to buy one, one about cost. Also, if my diagnosis is correct.

  See you soon

  Hello

  If you have received the message that there is something wrong with the cooling system so it seems that fans does not work properly and cannot cool the CPU.

  In this case, you must use the laptop because the processor and other parts can damage due to high temperature.
  In case you I recommend you contact Toshiba service partner in your country.
  Guys should check the laptop. You must explain the situation.
  In my opinion, the cooling module is not very expensive.

• All-in-one HP Deskjet F4140... Message 'Problem' of the ink cartridge

  I get the following message when I want to print something.

  The following cartridges have a problem.  Far right, Tri-color in the cartridge.

  I don't know why it says more 'right' because in my printer the color cartridge is on the left side and the black is on the right.

  It is a new cartridge.  I tried EVERYTHING under the Sun... and I mean everything.

  Nothing works.  I am at a total loss.

  I've NEVER had this problem before with my printer.  He was always a great impression.

  Can someone help me please?

  I went through that information yesterday and it did not help to solve the problem I had BUT on a hunch, I removed the 'black' cartridge that is on the "right" side and the lights stopped flashing.  I replaced the black cartridge and now everything works as it should.  There was nothing wrong with 'color' cartridge that is on the left.

  The information provided by the program of 'diagnostic printer' HP that I installed were incorrect, because it indicates the problem as with the "color cartridge... located on the right side

• SE error message: problem finding or reading the gameuxinstallhelper.dll installing FSX Deluxe Edition

  Original title: GameuxInstallHelper

  Recently, I tried to install Microsoft FSX, but at the end of installation a mistake happens that has a problem, find or reading the gameuxinstallhelper.dll. I need to find a solution.

  I'd appreciate if someone can help me.

  Windows 7 Home Premium 64-bit

  FSX Deluxe Edition

  Hi evank488,

  You can consult the following KB article and try the steps provided to solve the problem.

  Error message when you try to install a Microsoft Games for Windows game: "could not load the DLL: GameuxInstallHelper.

  http://support.Microsoft.com/kb/968365

  Note: You can also follow these steps for Windows 7

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• All-in-one HP Officejet 6500 has: paper size or the type of error message problem

  I have a HP Officejet 6500 all-in-one a and am running Win 7 on a desktop computer.
  I get a paper mismatch (type and paper size is incorrect) error message.
  The printer is not connected to the internet, but it is connected by a USB cable to the computer.
  I look at the instructions to make an internet connection and they were just too complicated. So I download the update of the firmware and ran to the computer. He would not go beyond the area of printer selection where no printers were found. Clicking Refresh has not helped.
  This update of the firmware seems to have solved the problem for some users, but I need to know how you install it.
  Thanks for your help.

  17/03/2015 #2

  I think I solved the problem. I went to the website to download drivers, etc., and, rather than to specify the printer, I clicked the button to let HP identify it. It came with the correct name (see post) preceding. Then, I downloaded and installed the full feature software and driver. The first attempt to print from Excel led to the mistake of page size, but, on a whim, I tried twice and had two successful prints without error. Until further notice, I mark this as solved problem.

  Thanks for your help,

  LK

• "Please insert a disc into drive I" error message problem. Help, please!

  I get the error message "Please insert a disc in the drive I" when I try to attach a drive external hard (in a case of hard disk) via a USB 2.0 to my Dell Dimension 8400 computer. I am running Windows XP Prorfessional.

  When I attach an external hard drive that comes with its own enclosure as a Western Digital MyBook via the same cable USB 2.0 the following happens. Windows Explorer shows the new disks I and J. If I try to open the drive I have, I get the "Please insert a disc into drive I"message.» However, when I try to open the drive J I'm able to do it and see the files, in this case, the Western Digital MyBook. I can also open these files.

  I searched the Internet for solutions to this problem. In some cases, the problem can be solved by renaming the drive letter, but this does not work in my case. Most of the sites I visited fail to provide a solution. Very many missions I've read on various sites, the problem seems to be related to error messages has Microsoft Windows. The solution would seem to have to disable this / these messages by changing the relevant parts of the registry. (See: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/logonuiexe-no-disk-there-is-no-disk-in-the-drive/7a158e14-6a56-4bfd-b1b5-796c3ccea3b0?page=2&tm=1341781513552, http://www.w7forums.com/please-insert-disc-into-drive-error-t11264p2.html, http://support.microsoft.com/kb/281345)

  Unfortunately, the information that I found are too vague and contradictory to me. Microsoft seems to suggest changing the value of ErrorMode in CurrentControlSet so that the user gets more no error message 'hard' (modification of the: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows\ErrorMode value = 2). However, this suggestion for the backup of SQL Server databases. It also seems a bit drastic to turn off hardware error messages. In another post the suggestion is to delete upper and lower filters in the section of the registry that controls the hard drive. The problem here is that you may have to reload the software. Also, I'm afraid I'll mess up the registry.

  I would be grateful to anyone who could tell me what parts of the need to register to edit and how to disable this message ' Please insert a disc in the drive I have. "

  I suspect that the boxes of hard drive that does not open professional XP are somehow corrupt. Unfortunately, the error message keeps me from use any diagnostic software to examine the hard drives in these speakers. In this regard, I would be grateful to anyone who might suggest a diagnosis good freeware hard drive.

  I thank the members of the forum for their help in advance.

  I really appreciate all help members can give me.

  1, the diagnostic software that youre looking for WDC, is a MS-DOS

  utility. Download from WDC, installed on an MS-DOS formatted disk, pc boot

  on disk, it automatically runs... With respect to the current problem, try to go to run, type:

  diskmgmt.msc

  MSC, locate the hd, L.click on this subject, go to actions, all, select 'enable ',.

  close the msc...

  You can also, type: cmd in run, type cmd: DiskPart in DiskPart, type:

  The type of disk list: list volume type: HELP for cmds all the...

• changed Kapersky security with mcafee and cannot retrieve e-mail messages. problems of server on the computer. McAfee can enter my password and my email. they say that I have a server problem.

  changed to mcafee kapersky and cannot receive my e-mail address. McAfee can use my username and password and receive my email. they say that I have a server problem.

  Hello

  I suspect that the problem is with your e-mail service provider, therefore, suggest you to contact your provider of messaging for better help.