HP ProBook 650 G1 L4A21UT #ABA: windows 10 update and restore the partition

Similar Questions

• Windows 7 backup and restore recording is not recent files (and task corrupted images)

  I recently discovered that my Windows 7 backup and restore does not work properly and need help to fix it.  The backup runs daily, but it seems that he spared not the files that have been generated in the last month or so.  For example, I was not able to restore files that have been created last week, even if they have been backed up yesterday.

  Any questions/comments that might relate to the question above:

  -J' had to upgrade to Windows 10 for 1 month and then downgraded to Windows 7, about a month earlier due to some software doesn't work only with Windows 10.
  -Last week, I realized that my automatic backup didn't work automatically.  I found the problem is due to a corrupt image of task in Task Scheduler I could fix.  I have developed from my backup with the recommended settings settings, and I discovered that the problem of missing file today.

  -J' still have a problem with the images of task corrupted because when I open the Task Scheduler, I get about 70 errors which "XXXX task: the task image is damaged or has been tampered with."  Any help

  Help for backup and the Task Scheduler issues would be greatly appreciated.  Thank you!!

  André

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  This could be due to corruption on the system files, please follow the methods below.

  Step 1: I suggest you to re-create the Task Scheduler.

  Steps to re-create the Task Scheduler

  1. Click Start; in the start search type regedit.exe and press ENTER. (If you get a consent prompt, click Yes).
  2. Navigate to the following location. HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.
  3. Save the changes and then close the registry editor.

  Now check if the Task Scheduler works.

  Note: The steps mentioned below includes the modification of the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Step 2: Perform the scan SFC

  I suggest that you can exercise SFC scan and check if that helps. The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. It is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  See the link: use the File Checker system to repair missing or corrupted system files

  Please answer us with this information and the current state of your computer, we will be happy to help you further.

  _______________

  Thank you best regards &,.

  Isha Soni

• Help the clean installation of Windows 7 Pro and using the GPO to run automatic updates and restart all night

  I am trying to solve a problem that will probably require a new installation of Windows 7 Professional 64-bit. The grace period ends in 3 days, and the next 30 days are final exams at the College. I have 2 licenses (and product key) of Windows 7 Pro, but my drive HARD goes wrong and I don't want to use MAK activation. I will be eventually to replace the disk, but is now bad timing.

  If a reinstall is needed, I was going to ask if anyone knows how to set the strategy of perhaps a GPO where Windows is updated automatically in the background and after installing updates, 45 or 60 minutes, then restart. The goal would be to have a computer fully patched when I wake up in the morning.

  This is my plan:

  Install Windows 7 Pro SP1 64 bit > Windows automatically updated and plug the Ethernet cable > define a GPO where the computer waiting for 45 to 60 minutes after installation of updates (so the msi may end in the background, and I do not interrupt the installation) > the PC will restart > more update swill be downloaded and installed > wait due to the policy of GPO before reboot > Reboot > do it until it's over. > wake up with a PC fully patched 7-9 hours later.

  Is this a workable plan?, and if so, how do I define policies such as delay restarting, etc. to achieve?

  The reset did not work. It would be a simple solution. I have a valid license, but I don't want to replace the HARD drive until after final exams are over, so I'll reinstall and activate. I try to achieve in the next 24 hours, so it doesn't keep me from my school work.  I must also support and will then replace my files.

  Feel free to advanced used terminology. I have some experience.

  Any help is greatly appreciated!

  Another question: should I install a security suite before all updates being installed more than 12 hours, or wait until later? What is the level of risk?

  Anyone used Ninite to automate the installation of other programs? Is how safe it?

  Thank you!

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Windows 8 freezes and gives the Blue error screen every hour approximately

  Hello guys. I have a problem with my system: windows 8 freezes and gives the Blue error screen every hour or more. usually it freezes, displays a blue error screen (clock watchdog timeout knode or not handled exception or something on a system request), I force restart it, and then it happens again (sometimes 3 - 4 times in a row, then it will be fine for another time). Here is the link to my dump leader : https://www.dropbox.com/s/uv27xr54esjlen0/MEMORY.DMP?dl... . The machine I built myself: amd fx 8350, card mother m5a97, dvd - r, 1 ssd, 1 hdd, PSU 500w, gtx 650 ti video. Also, here is a report of CPU monitor ID: https://www.dropbox.com/s/k1ma0m6maap404q/HWMonitor.txt... . I have already done all the windows, direct x updates and drivers and ran ideas
  If anyone has advice like how to do to solve this problem, please help me because I'm going crazy.

  Thank you.

  AS

  DMP file is corrupted and useless.  Please reconfigure your system for dmp files small as described in this wiki

  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  Please provide us with your administrative Event Viewer logs by following these steps:

  Press Win + 'R' and type eventvwr > enter

  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download the .zip for Onedrive or a file sharing service file and link to it in your next post

  *

  If you have updated to win 8.1 and you get the error message " " " the system cannot find the specified file" it is a known problem.  The work around is to change the registry.  If you are not comfortable doing this DON'T.  If you are, save the key before making

  Press Win + 'R' and enter regedit

  
  Navigate to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/analytical.

  
  

• I had installed windows 8.1 with bootcamp, it was a c drive and I tried to do a second drive d with management of the disks, but when I shrink c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my

  I use macbook pro.

  I had installed Windows 8.1 with bootcamp, that there was a c drive, then I tried to do the second drive with disk management d when I shrink the c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my mac osx.

  Please help solve this problem.

  This partitioning is not supported. Please download GPT Fdisk from http://sourceforge.net/projects/gptfdisk/ and install it on the Windows side. Once it is installed, thanks for posting the output as indicated in the CMD window.

  

• I lost the connection to Windows 2003 server and through the connector.

  I lost the connection to Windows 2003 server and through the connector.

  original title: WHS connector has stopped working.

  Hi Mjopritchard,

  The question you have posted is related to Windows Home server and would be better suited to the Windows Home server community.
  Please visit the following link to find a community that will support what ask you:

  Support for Windows Home Server

• Everytime I open a session Windows installs updates 4 (probably the same)

  Whenever I connect (and disconnect) Windows installs updates 4 (probably the same)

  Assuming Vista or Win7...

  See this discussion: http://answers.microsoft.com/thread/cac55bf2-e271-e011-8dfc-68b599b31bf5 (which now includes a countless number of threads merged to confuse you more).

• There was an error Code Ox800710D9 when you try to update and install the Windows SP2

  I can't update Windows XP SP2 due to an Ox800710D9 error code.

  Hi frankhunt,

  Try these steps and check the result.
  Step 1: Stop the Cryptographic Service
  a. Click Start, click Run, type services.msc in the Open box and then click OK.
  b. in the Services dialog box, click Cryptographic Services, and then click Properties.
  c. in the cryptographic services properties dialog box, click the general tab and then click on stop.
  Option Service status changes to Stopped.

  Step 2: Remove the Windows Update.log files
  a. Click Start, click my computer and then double-click the hard disk where Windows XP is installed. For example, double-click the C drive.
  b. click the Folders box, click the Windows folder and then click the System32 folder.
  Note If you receive the following message appears, click Show the contents of this folder:
  "These files are hidden.
  This folder contains files that keeps your system works correctly.
  You should not change its content. »
  c. click on / open the CatRoot2 folder.
  d. remove the Edbxxxxx.log file.
  Note: In this step, xxxxx is a placeholder that can represent any combination of letters and numbers, numbers or letters.
  e. Click Start, click my computer and then double-click the hard disk where Windows XP is installed. For example, double-click the C drive.
  f. click the Folders box, click the Windows folder and then click the Security folder.
  Delete the file Edbxxxxx.log.
  Note: In this step, xxxxx is a placeholder that can represent any combination of letters and numbers, numbers or letters.

  Step 3: Start the Cryptographic Service
  a. Click Start, click Run, type services.msc in the Open box and then click OK.
  b. in the Services dialog box, click Cryptographic Services, and then click Properties.
  c. in the cryptographic services properties dialog box, click the general tab and then click Start.
  The service status option changes Started.

  Step 4: Install the service pack
  a. visit the Windows Update Web site to update the computer to Windows XP SP2: http://windowsupdate.microsoft.com
  b. install the update and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows some updates not installed the 646 error code

  Windows some updates not installed the 646 error code

  See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/5300b50a-dfcd-42fb-9785-ab52f2ee1796 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• W7 - Windows stop at 15%, stop/start pc update and cancel the update automatically before restarting the computer properly

  I recently bought an asus UL30A with W7. Since December, the system tries to install an update, stop installing at 15%, stop and restart the PC and automatically cancels the update, stop the pc again and restarts correctly. Watch the status of Update window, I've not opened updates, message,... all previous udpdates have been correctly installed.
  I tried a system restore by selecting various old success to restore update, but I have not one mentioning an error message that it cannot restore the system.
  Thank you for your help

  Hello

  References to Vista also apply to Windows 7.

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to do a system restore in Vista and Windows 7
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Cite your version of IE and the full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) during the validation in an IE specific forum or a newsgroup. Please do it in your next reply.

  By "The Internet began" do you mean that you encounter errors Page can not be displayed ?

  Updates have you installed just before this problem started? Have you installed an update of the third-party driver that is offered by Windows Update?

  TIP: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• Screen saver turns on (Windows XP SP3) and lock the computer and the user cannot log back with their credentials without administrative rights

  When the screen saver is used and the user returns to open a session.

  they get...

  This workstation is in use and has been locked.
  The workstation can only be unlocked by user123 or an administrator.
  Press CTRL + ALT + DELETE to unlock this workstation.

  user123 cannot log back in. unless he made a system admin an administrator connections or user must reboot the machine to reconnect.

  Hello

  -Is the computer connected to a network domain?

  Please follow the steps mentioned below and get back to us with the results.

  Cannot lock a "locked" computer administrator.

  http://support.Microsoft.com/kb/242917

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  For more information, see the link below.

  Information about unlocking a workstation

  http://support.Microsoft.com/kb/281250

  If the computer is connected to a domain, I suggest you to post your questions in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope that helps!

• I install Windows xp sp2 and insert the product key but it says it failed.

  Hi, this is Rohit.I have a big problem I have buy windows xp sp3, and after 6 months or more my o/s computer corrupted, then I install Windows xp sp2 and insert the product key but it says that it is fail... So please tell me what I can do... Please tell me or send email to * address email is removed from the privacy *

  Number of keys that came with XP SP3 licenses can be installed on systems of SP3 - MS loose a new set of keys with SP3.

  You must use the appropriate SP3 provided with your key media.

• Windows XP trying to update and get the error: another installtion progresses.

  original title: Windows XP, try to update and get the error: another installtion progresses.   That all before you proceed with this installation. How can I know what is the installation and the status?

  Windows XP trying to update and get the error: "another installtion progresses.   That completes before proceeding with this installation. "How can I know what is the installation and the status?

  Hello

  1. are you referring to Windows update?
  2 have you made changes on the computer before this problem?

  Please answer these questions and to provide more specific information on the issue. This could help us help you better.

  You can check the question in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. click Startand then click run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart to restart the computer.