Method of access in a bean via EL

Similar Questions

• To access the Session Bean?

  Hello

  With the help of Jdev 11.1.1.7.0. mrequirement is I need to access session Bean on the Module of the Application.

  
  

  so I use this way in my implementation of the application module class .

  SessionBeanClassName sessionBeanClassObject is JsfUtils.getManagedBean ("recorded in the adfc-config sessionBeanName").

  I can able to access via the module of the application.

  My question is:

  1. is this good sense?

  2. No Impact on this approach?

  3. is this a good practice?

  4 is one way to access the variable from Session Bean on the application module.

  Thank you.

  Q2) the impact is that you break the mvc pattern and therefore the model of coupling to the display. Later, this can be a problem because your application doesn't fit. Add pass you ui state model (am) you might encounter problems when querying comes into play.

  Sample of Q4) Chris did not access to a bean in scope session leave an application module, but how to get there from an another view layer bean.

  Joel Ramamoorthy-Oracle and Cvele_new_account and myself you asked before, without a real use case all we can say is: don't access scope the model layer session bean.

  Timo

• Access EJB session bean in JSF managed bean

  Components of the project: Weblogic 11 G + 12 c, 12 c EJB3 JPA 2 Jdeveloper-ADF

  I need to access EJB session bean in JSF managed bean and some methods of execution by program

  Work method and return EJB below
  Is this fair? Another way

  public static Object getEjbForDataControl (String name) {}
  BindingContainer DCBindingContainer = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
  DCDataControl cDataControl = bindingContainer.findDataControl (name);
  Return cDataControl.getDataProvider ();
  }

  Thank you

  Mohsen

  Hi Isabelle,.

  I assumed that his Session EJB bean has not been exposed as a data control (my bad, didn't read any of the discussion).

  Antonis

• Firefox opens, but this morning, I can't access all the links via Firefox. I can through Explorer. I prefer Firefox. Help!

  Firefox opens, but this morning, I can't access all the links via Firefox. I can through Explorer.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• Cannot access the Media folder via App IOS Readycloud

  I have a RN204 4.6.2 running in an OSX system which will not allow access to the Media folder via the IOS app on iPhone or iPad. I can access the media folder via the ReadyCloud portal or the finder on MAC without problem, but the IOS App shows "Access Denied" and requests user & password, which, when entered, does not. I can access all other folders via the application, just not the media folder. Permissions are set the same as the other issues so I'm not sure what the question is that if she's Readycloud app for IOS. I guess the user & password requested is for NAS, although I tried the credientals of Readycloud just for fun but no help. As a note, I don't get "Connection failed" but "Access Denied", so the network access is OK but access to the file is doesn't understand why all other folders are accessible but not the media folder. And that's on both VPN connections & local. Any ideas?

  OK, get it fixed. I have changed the name of the folder, allowed full access, then he changed the name of moose. Now I can access the folder via the ios app. I'll have to rescan the actions in my media streamer, but to the East, I now access app.

• Is it possible to determine if a person has access to my computer via an external source?

  Original title: hacking

  Is it possible to determine if a person has access to my computer via an external source?

  Hello bconn07,

  You must grant permissions via remote access or they would have to introduce a software on your pc without your knowledge for them to access. The software is usually by means of malicious programs and your anti-malware application must pick up that, especially if it's a keylogger or a rootkit. Try to download Malwarebytes antimalware http://malwarebytes.org (download the free version). Install it and then run it. It's good enough to malicious software localization.

  Pirate can introduce a software called keyloggers that send information on the key, you press on your keyboard. This can help them steal passwords etc. However, I do not say that you even have apps keylogging or view on your system, so don't panic. I suggest, however, an application called Keyscrambler personal http:// http://www.qfxsoftware.com/download.htm it works by disguising and precautions that you ever install key press you. By example, if you typed "Bill" keyscrambler journal would be something like 'kl97' thuis makes it very difficult for any keylogging software interpret what keys you actually used.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Can't access language option "Add" via the control panel - > regional options and lang.

  Cannot access language 'Add' option via Control Panel-> regional control and options. lang-> keyboards and languages-> text services and input languages. When I click on 'Add', the language menu appears, but I can't take anything as the OK button is inactive. And I know I could do it before because I already added another language to my keyboard. Could you please help me?

  Thank you.

  Hello

  Please continue with the steps below...

  1. click on start, type intl.cpl in the start search box and press ENTER.

  2. on the keyboard and language tab, click on change keyboards.

  3. click on Add.

  4 expand the language that you want. For example, English (United States).

  5 expand the keyboard list, select the United States-International checkbox and then click OK.

  6. in the default input language list, click the language name - United States-International (where language name is the language that you selected in step 4) and then click OK twice.

  7. in the regional and Language Options dialog box, click OK.

  Notice that the language bar appears on the taskbar. When you position the mouse pointer, a ToolTip appears that describes the active keyboard layout.

  8. click on the language bar and then click States United International on the shortcut menu that appears.

  United International keyboard layout is selected.

  See the article below which talks about the same

  How to use the United International keyboard layout in Windows 7, Windows Vista and Windows XP
  http://support.Microsoft.com/kb/306560

  Add or change an input language
  http://Windows.Microsoft.com/en-us/Windows7/add-or-change-an-input-language

  If you don't see the language bar, right-click the taskbar, point to toolbars, and then click Language bar. For more information about the language bar, see the article below for more information:

  The language bar (overview)
  http://Windows.Microsoft.com/en-us/Windows7/the-language-bar-overview

  In addition to changing the input language, you can also customize your keyboard for a specific language or format. For more information about customizing your keyboard, see:

  Change your keyboard type
  http://Windows.Microsoft.com/en-us/Windows7/change-your-keyboard-layout

  Additional information:

  What can I do with regional formats and languages?
  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-do-with-regional-formats-and-languages

  Change your keyboard type
  http://Windows.Microsoft.com/en-us/Windows7/change-your-keyboard-layout

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot access the AIP SSM via ASDM

  CISCO recommendations below:

  Cannot access the AIP SSM via ASDM

  Problem:

  This error message appears on the GUI.

  Error connecting to sensor. Error Loading Sensor error

  Solution:

  Make sure that the IPS SSM management interface is up/down and check his IP address configured, default gateway and the subnet mask. It is the interface to access the software from Cisco Adaptive Security Device Manager (ASDM) on the local computer. Try to ping the address of management of IPS SSM IP interface on the local computer that you want to access the ASDM. If it is impossible to do a ping check the ACLs on the sensor

  ----------------------------------------------------------------------------------------------------------------------------------------------

  I've tried everything recommended above. I can ping the host ASDM the FW and the SSM-10 module. Well, I ping the host machine and the SSM of the ASDM. I opened as wide as possible ACL. I changed the IP addresses and masks several times. The management of the ASA port and the SSM and the PC are on the same subnet.

  A trace of package from the PC to the SSM shows that it is blocked by an ACL rule, and yet I opened wide.   I've seen this kind of problem before and it was solved by applying the double static NAT, but I don't know how to do that if all the IP addresses are on the same subnet.

  Tried everything, need help from high level.

  The IDM software that comes with ASDM does not support java 1.7. The portion of the ASDM ASA supports 1.7 but launch the IPS cmdlet works only with 1.6. The TAC enginner suggested that I use the IME (IPS Manager Express) which is available for free on the Cisco's (http://www.cisco.com/en/US/products/ps9610/tsd_products_support_general_information.html) Web site.

  I've been playing with it today, and so far it seems to work pretty well.

• We can access autogen_dimensions.xml file via a URL?

  Hello
  
  We can access autogen_dimensions.xml file via a URL?
  
  Is it possible to access the file autogen_dimensions.xml with the URL as shown below.
  
  http://host:port / < App name > /Data/State/autogen_dimensions.xml file. I want to read this file in my java class.
  
  Kind regards
  Ravinder P

  Service platform is delivered with 2 copies of the reference application. The folder that you noted is not functional, for reference.

  Who is running is located at:

  \Endeca\PlatformServices\6.1.2\tools\server\webapps\endeca_jspref

  You should be able to just drag the files in there.

• Access to VMFS existing via iSCSI storage

  Hi all

  In a test environment, I'm trying to access a VMFS existing via iSCSI data store.

  In the storage adapters, I clicked on Rescan. The SCSI target is displayed correctly. However, it is not in the storage, even after clicking on refresh.

  If I click on add storage and select disk/LUN, I can see the storage device, clicking on watch then the primary Partition as VMFS. Of course if I click Next again this reformatted it as a new data store, something I don't want to do.

  How can I get this existing VMFS volume is displayed in the storage?

  TYIA,

  Eric

  www.mymanagedbackup.com

  Have you tried to define enableresignature on 1 in the advanced settings (see attached) and then a new analysis.

• Access a managed bean of a region on a page

  Hi Experts,

  I have a parentTF.xml of flow of tasks parent that contains a page, parentPage.jsff and I have an area of childTF.xml.

  childTF.xml has a managed bean, childBean.java and parentTF a parentBean.java.

  I want to go to the parentBean.java chilBean method. Is this possible?

  Re: Access to a taskflow bean managed via code

  Let me know if you need assistance...

• Access database Backing Bean field

  JDev 11.1.1.6

  Can someone point me to a url that provides an example of access to a field from an Oracle database?

  I need to execute a query that returns a Date and stores it in pageFlowScope.

  Thank you

  Ray

  I can't say I understand your use case, but will not may not be not necessary.

  You want access to a field in the db. For this you need a query that returns exactly the field or the value you need. To get this value via a query, you may need to adjust some settings.

  You can define a method in the original version that takes the query parameters, executes the query and returns the value accordingly. This method you expose in the interface of the client of the vo to make it accessible from the user interface.

  Now you can see the method set out in the vo in the data control.  Drag the method on page one on the page.  This will create the need for links in the pagedef. You can use the entire form in the settings or fill them managed bean s. Run the query by clicking on the button or the managed bean. The result of the call is placed in the return parameter of the method call, or may be getting because the operations of the object.

  Timo

• No methodActions in a module of the App application and access of backing bean

  USNG ADF 12 c on Windows 7.

  I've inherited an application that does not have methodActions defined in the pageDefs and uses a custom method to get the instance of the app module (return (appModule) getDCBindingContainer () .getDataControl () .getDataProvider ()) by supporting beans.

  The latest I can remember seeing in a document is a bad practice.

  All the places where the app module instance is acquired should be changed to methodActions? Or am I worried for nothing here?

  Thanks for your opinion!

  Kind regards

  Dave

  ^ Well, for me, this is a no go to use the code you provided. You should not use the application module in the bean because it tends to violate the MVC pattern. You may have to implement a method of the application module, add to the interface and use via the pageDef as an action method customer. This seems to be more work but allows to encapsulate the business logic in the view layer. The advantage of using methods defined in the pagedef, is that they are handling errors the same way. There is no need to handle the error yourself. The framework know dangels done in methods (if you do not use pl/sql to change the db directly and does not synchronize the frame later).

  request module is the interface that everyone should use.

  Timo

• How to access the managed bean taskflow action result?

  Hi all
  I have a requirement where I have two areas of text (username and password) and a SignIn button. When the user clicks login, my action managed bean will run the view object and get the password for this user name. And that's why it will compare the password presented by the user and the password came from the view object. I a taskflow, in which I have two points of view, we're signIn page and other is the home page, and the result of the action is successful.
  The managed bean method here signIn Page for SignIn button.
  
  public String execute() {}
  String EnteredPassword = PassEncrypt();
  ApplicationModule am = ADFUtils.getApplicationModuleForDataControl ("AppModuleDataControl");
  ViewObject myView1 = am.findViewObject("LogindetailsView1");
  System.out.println ("Usrname is" + this.) (Username);
  myView1.setNamedWhereClauseParam ("v_Username", this.) (Username);
  myView1.executeQuery ();
  DCBindingContainer links =
  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
  DCIteratorBinding empIter = bindings.findIteratorBinding("LogindetailsView1Iterator");
  String DBPassword = empIter.getCurrentRow ().getAttribute("Password").toString ();
  
  System.out.println ("password is" + DBPassword);
  
  {if (EnteredPassword.Equals (dbpassword))}
  
  Here, I need to call the result of success, which will allow the user to get access to the display of the home page in taskflow.
  
  }
  else {}
  FacesMessage fm =
  new FacesMessage (FacesMessage.SEVERITY_ERROR, "Please check your name of user and password",
  "Please check your name of user and password");
  FacesContext.getCurrentInstance () .addMessage (null, fm);
  }
  Returns a null value.
  }
  
  If this can be done using the method call in taskflow then how could use it in my script?
  Please suggest.
  Thank you.

  you have a rule of navigation between these two pages
  If so, simply return the navigation rule name

  if(EnteredPassword.equals(DBPassword)) {
  return "success";
  }
  

• Can't access "Show all downloads" via the "library" Panel

  Top of page where you can click to see the progress of your downloads, there is the option «Show all downloads»

  When I click on 'Show all downloads', it shows me the 'library' with only one option. On the left hand side, I see the option named "all bookmarks". "However, has nothing else where he must also propose 'History,' Downloads ' and 'Tags' alongside"all bookmarks ". So, I can not access my downloads (of course, I can access my downloads through my account, but not what I am referring. I always prefer to verify via firefox, because it is much easier and faster).

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file