Methods of deployment of firepower 7120

Similar Questions

• Deployment of firepower of NextGen IPS with support multitenancy

  Dear,

  I have a concern about the deployment and the design of fire power next generation appliances IPS 8250 in deploying multi-tenancy, I need to have the unit of IPS inline running in two different zones (edge and DC), at the same time have a higher bandwidth with the selection of interfaces such as BP or NBP for this configuration to use this high bandwidh IPS about 10 G of a type!

  second question: what are the options of building redundant IPS solution? If no single point of failure!

  Thank you all.

  The NGIPS device support not properly shared. You may have even different policies to different interface of a given sensor, but the sensor can only belong to a single domain.

  You can use the functionality of domain management fire power Manager 6.0 to separate the access of your tenants across different managed devices:

  http://www.Cisco.com/c/en/us/TD/docs/security/firepower/60/configuration...

• Best method to deploy the virtual computer

  Anyone who can tell me what is the best way to deploy the virtual computer deploy of the FVO or models (the VM creation) that create the virtual machine of the templated took longer time compare to the creation of the FVO. Any Suggestions?

  Deploying the model customizze the new machine as part of the deployment will treat you while FVO will be an exact xopy, so you need to manually configure the new machine.

• Deploy shared Variables

  I'm having a problem with the help of EVS. I use LV 8.6 (impossible to pass to 2010 at this hour, must "make it work").

  I used before shared variables with a GUI and PXI, but my setup is different now:

  PXI (called target) that "speaks" to the different controllers via Modbus TCP/IP. Separate interface for PXI PC to provide a user interface (called my host).

  I ran across messages spoken by calling the library method to deploy in the first level VI of the application. I want the PXI to deploy variables shared, because it will run constantly and the PC is optional. "Manually" transfer the shared variable library, in this case called the NetworkVars, for PXI so the PXI application can find? PXI will run independently once the program is fully developed.

  I have used Labview for a long time but have never had to do a lot with networking and sharing.

  Thanks for any help.

  I ended up upgrading to Labview 2010 and now everything works as it should. I will mention that it was a complete horror show trying to upgrade... including duty reload WinXP on my development computer, because the files have become corrupt. Now, I have to charge a ton of programs, at a later date, because they are there but are not related. Fun stuff.

  Thanks for all the help.

• Cannot deploy the bar file BB10 Simulator.

  As the title,

  I have try all the possible method to deploy my bar of file Simulator BB10 running on VMware player without a bit of luck.

  The IP address that I use is the one indicated in the developer section of the simulated device:
  169.254.0.1

  no luck, I can't even ping the device to the windows console.

  Any idea?

  If you are connected to a VPN, it can cause connection problems to the Simulator.

  Could you try reboot the Simulator in bridged mode?  You can change this under the network option in the settings of your virtual machine.  If you do not have to go through NAT, which could cause you problems, this will put the Simulator on your physical network card.

  Also are you able to telnet/ftp to the Simulator?  You can identify yourself as devuser/devuser.

• Parameters of OEM for pre/Post Installation (deployment/patch) Scripts

  If all goes well, a simple question.

  Install scripts OEM 12 c Supports pre/post in the form of shell scripts that can be run before and after a deployment or patching operation (for example when you deploy the Client OEM to a system, you can run a script before installation or after installation).

  These scripts can take a parameter?  Specifically, can the machine which is deployed to be transmitted to these scripts shell as a parameter (for example /opt/my_shell_script.sh HOST % where % HOST would be replaced by the host name being patched or transferred to for example).

  To be clear, I don't mean to have a script running ON the area being installed to... I want to use the box being installed in as a parameter of a script running on the Server OEM.

  Cannot find any documentation on what or if the parameters are supported in these pre/post installation scripts.

  Any information would be appreciated.

  Hello

  One of the ways to circumvent the requirement of SUDO is to use the silent method of agent

  REF

  Installation of the Oracle in silent Mode Management Agent

  http://docs.Oracle.com/CD/E24628_01/install.121/e24089/install_agent_usng_rsp.htm#CEGGACJE

  Also check

  EM 12: what Sudo permissions are required to install Agent using the method of deployment with the user account locked (Doc ID 1489270.1)

  Kind regards

  Rahul

• Deploy and configure Agent 12 c has failed

  Hi all
  
  We are trying to install 12 management agent using the method to push the current WHO 11.1 agent
  so far, we have applied the patch to upgrade console pre and don't have not upgraded to 12 c SGD again.
  We use 1 uproach system upgrade. and use the push agent of our current 11g SGD method to deploy and configure the agent of 12 c.
  I'm confused with the user name and password in the credentials section root, we do not have password oracle as we use power broker. and we either root password.
  When I try to run the task, it fails
  I asked the unix guy to help out me, they said that they can not install sudo as we don't use it.
  Please help am I missing something here.
  
  on the other hand, I installed the agent 12 c on 5 hosts of the 59 that we have since I got the root password it went smoothly.
  
  Thank you
  SJ

  Youe query is not clear to me. 12 c agent is not supported with EM 11 g SGD.

  When you use 1 system upgrade, you must use the pre-upgrade console to deploy agents and go through the process of upgrading the agent. In this console pre-upgrade, born to provide to the agent you install user to install the agent 12 c and switch.

  If this installation agent user has no root privilliges or if you have any credentials to the root, and then enter the credentials for the agent. In this case, the root.sh script is not run, but the deployment is successful. Make sure that you run this script after deployment of the Management Agent, before manually to use the new Enterprise Manager 12 c cloud control system. Otherwise, you will not be able to perform tasks on the Management Agent. If the root.sh script is not executed, passage of the Management Agent is not affected.

  Oracle 12 c, the existing connectivity between the former Agent of management and WHO is used to deploy and configure the Management Agent; SSH is not used.

  Refer to the upgrade guide:
  http://docs.Oracle.com/CD/E24628_01/upgrade.121/e22625/TOC.htm

• Make changes to firefox by area

  I need the custom homepage bookmarks personalized for each cleint value and block the changes requested in the firefox.can I use the domain name and to do this? at least homepage?

  Hello, the General method to deploy a specific configuration of firefox by changing some files in the firefox program folder is shown in the http://kb.mozillazine.org/Locking_preferences

  You can also use extension mike kaply cck2 do conveniently: https://mike.kaply.com/cck2/

• Measurement Studio 2015 Installer creator vs WIX

  What is the reasoning behind the development of the new measurement feature Studio Installer?  I have never had any problem using Wix for mixed deployment c#, C++ that use Measurement Studio products.  It just seems like an odd sense to send the development resources, opossed say, improve support WPF?  Or documentation of the product and samples for WPF?

  Mark DeArman

  Hi, Mark

  The reasons that we have dedicated development resources by creating a builder application to install for Measurement Studio are:
  1. Once Visual Studio has diminished in favour of their native installation project, the number of support requests involving the deployment of Measurement Studio has increased considerably.
  2. Apart from the Setup project, the only other method of deployment which Measurement Studio is fully supported is Windows Installer XML (WiX), which was not well received by customers. Almighty, WiX has a steep learning curve, even to accomplish a simple deployment.
  3 measurement Studio does not support InstallShield, among other popular solutions to WiX for the deployment.
  4. the supported deployment methods, no guide customers what drivers OR and components attached to their application to ensure good run time behavior.

  Builder installer helps to solve these problems and has already received positive feedback from many customers.

  Please let us know if you have any other questions about the Builder installer; We would be happy to help you!

  Thank you

• I can't find the .bar file

  Hello

  I developed an application in eclipse blackberry native indigo with Blackberry Java SDK version 7.1.0. I tested Simulator, everthing is ok but when I look at my workspace, could ' t find .bar file. There are .cod, .cad, .jar files vs but .bar file is not. Where can I find the .bar file or what I need to do to generate the operations .bar file?

  Thank you...

  You must move to the right forum:

  http://supportforums.BlackBerry.com/T5/Android-runtime-development/BD-p/ADT

  That said, your question about the deployment of applications is interesting and applies to others who might convert Java apps BB10. So this may be interesting information for other readers on this forum...  However it can be as bad, so read with caution.

  My understanding is that the only method of deploying software to BB10 apps to devices, apart from the side loading in the design environment, via App World, now Blackberry World.  BB extend it to support Business Applications - and company administrators can choose the world BB Enterprise applications and target these to their managed devices.

  If the concept of pushing to the server has disappeared.  As has the notion of downloading applications to a web site or side loading using the Desktop Manager.

  It's worse for Android applications.  Android applications will be refused for enterprise BlackBerry World, because the side job of the balance does NOT include the Android runtime.  It is only supported in the personal plan.

  So if you plan on writing a business application, you will have to develop into one of the other supported platforms, such as HTML5, waterfalls or WebWorks.  Not Android.

  And even if you do this, you will need to set up the app World de BlackBerry Enterprise and of course your client company must run BES 10.

  I personally have not had to fight this battle, so it's just my understanding.  But I'm developing a company BB10 application so will face this situation myself in the next few months.  Then I will know for sure!

• Files to publish to the OTA install

  Hello

  I use the eclipse JDE plugin.

  I noticed the results folder contains the application files.

  If I want to use an installation OTA, what files and what folder structure must use to install?

  Thank you

  It depends on which OTA option you use.

  To install via the browser, you must deploy the file JAD and COD files on your web server.  Don't forget to set up the necessary mime types on the server.

  MIME types required for a web server use BlackBerry smartphone applications

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/the-required-MIME-types-for-a-Web-Serv...

  To install OTA via push application BlackBerry Enterprise Server, you deploy the ALX file and cod.

  You can see an overview of all methods of deployment here:

  How to deploy and distribute Applications

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/how-to-deploy-and-distribute-Applicati...

• Creating Firesight IPS policies

  I need help for creating rule asa firesight ips.

  By default, it is a 'discovery network' under access control. It works fine, I see connection events.

  Now, I want to do full-fledged IPS. How do I do that?

  On Firesight, IPS-> policy, create a new policy, I'm doing here had to be defined, rules and categories?

  Please see the presentation of Cisco Live session BRKSEC-2018 of Cisco Live WE earlier this year. It is a free download from ciscolive365.com.

  He did a great job to specify what policies are necessary for effective deployment of firepower and how to create them.

• Defining a 1852nd Aironet AP - Radio Off - Cisco IOS 12.3 (4) JA

  I have a brand new Cisco Aironet 1800 AP series I'm trying to install. Specifically the 1852E. I do not have a controller and try to use the method of deployment of mobility Express. When I received the unit there is a yellow label more precisely declaring outside: "OFF BY DEFAULT note RADIOS: radios are disabled by default for Cisco IOS releases 12.3 (4) JA and later.

  If anyone can please tell me how I am supposed to this access point configuration when the radios are not suite, so the CiscoAirProvision SSID is not broadcast?

  I tried the following:

  1 connect the unit to my PoE switch. Unit Gets power and discovery mode starts (red/orange/green light cycling). He succeeded receives an IP address from my DHCP.

  2. when I try to access the device through my laptop via the local LAN it just times out. Pings meet.

  I apologize if my post seems harsh, I am quite agitated that even after having spent more than 5 hours trying to troubleshoot and get this thing to work, there was nothing else than a nightmare (both for the installation of touted 10 min). I do RTFM. I missed something simple jumps? or am I just to assume that Cisco has really missed the boat the patch appropriate for an assignment in their literature.

  FOR INFO. Thorough searches Google and research on this forum gave me no help.

  Thank you.

  Convert a CAWAP AP an AP express mobility

• Virtual DC

  I have an old Sourcefire3D virtual Center of defense that was taken out of production for several years now, but I kept in my inventory. It is 5.1 running and is not currently used, but we are looking to upgrade all the ASAs at the X models in order to obtain the features of firepower. My question is, can we reuse and upgrade of this domain controller virtual to use in our new deployment of firepower?

  Thank you

  Brandon

  If you have a support contract you can improve in steps to the current version (6.0.1 now).

  I did it for our virtual lab DC from 5.2 5.3 > 5.4 > 6.0, including the intermediate fixes along the way. It manages as well a ASA X 5506 with fire power module and a 7125 3.

• Put into service devices (EX60, etc.) added as TMS systems

  Two questions based on this topic.

  1. I noticed when I configured my EX60 with our VCS that everything has worked out perfectly well.  However, I would like to add also the system in TMS as a system that gets watched, not managed as such by TMS.  I noticed that there is a checkbox in the settings called 'Set up', preventing MSDS to alter the configuration of the parameters on the codec and switching TMS to be VCS.  However, I have noticed once that I added it in TMS after it has been supplied by VCS, TMS has changed the settings of commissioning until I could check the put option in service in the page settings of TMS of the codec.  Y at - it a good way or numbered steps to add a codec in TMS that will eventually be put into service in VCS?

  2. How someone handles directories within TMS, if one has a source of directory-based endpoints in a folder where the aircraft put into service, and you have the directory based on the configuration directory.  How would he keep the system appear twice?  Right now the directory provsioning side two H.323/SIP as @domaine, while settings for H.323 and SIP is @domaine.  Are there two entries because it is listed in the telephone directory in two different places, or the H.323 entrance is different?

  So, basically, what is the preferred method of deployment when provisioing these devices with the VCS and wanting to be able of have registered them in TMS for all purposes the user would like.  Because obviously the two can be made, do not know the best way to go about it.

  Hi Patrick

  1: I tested the first scenario in two ways, adding the endpoint to the TMS and then provision it and purge, available and add it again.

  None of these facts, the box automatically ticked but adding the system first, gave the time check box so that the parameters of TMS is not applied. I guess it's the best way to do at the moment.

  2: as you know, when the system is put into operation it is associated with the user in the TMSPE directory, FindMe would be the answer here and then choose to not import the "peripheral" in the provisioning directory to keep only the URI FindMe. You want to configure the EX with a model of the device: [email protected] / * /

  The end point once added to TMS will appear in the "All systems" directory, which is an effect that you get when you add the system put in service to TMS. But the effect is neutralized by FindMe when you are not importing the user devices in the configuration directory.

  / Magnus