MIC RDP

Similar Questions

• Computer target hung and RDP held while making the Office remotely in Windows XP Professional

  Hello

  I have problems with Remote Desktop for Windows XP Pro SP3. The scenario is as follows

  1. Target computer is Windows XP Pro SP3
  2. Client PC also has the same OS
  3. With the RDP Client, computer target hung. On the client, it is show as trying to connect and continues for a long time
  4. On the target pc, even keyboards and mice do not work
  5. Any application working on the target computer is also get hanged
  6. The only way to normalize the target computer is restart

  Under Remote Desktop, we have already given all the required permissions. Please note that

  • The firewall on the target computer is OFF
  • Symantec antivirus is installed
  • RAM is more than 2 GB
  Can someone advise me on this?
  Thank you.
  Kind regards
  Feraud

  Hi Feraud,

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that the remote desktop connection is blocked on the target computer.

  I will certainly help you with this issue.

  Here are some methods that you can try in order to solve the problem.

  Method 1: Temporarily disable the antivirus from Symantec and check.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Change the listening port for remote desktop and check.

  http://support.Microsoft.com/kb/306759

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  For more information, see the links.

  The problems of desktop remotely

  Note: Applies to Windows XP

  How to use the Windows XP Professional Remote Desktop feature

  If the problem persists or you have any other questions about the remote desktop connection, do not hesitate to let us know. We will be happy to help you.

• I can't get my iPhone 5 to recognize an external mic using the separator Conwork mic

  I can't get my iPhone 5 to recognize a micro Conwork separator. Also my iPad won't recognize the port splitter. My iPhone and iPad instantly recognize the Apple headphones with microphone. Conwork announces that their product works with iPhones. I am trying to use a dynamic microphone for filming with my iPhone and iPad.

  There is no STD for headphone mini-jack 3.5 mm with apple to mic input handle one other way makes handle it otherwise, if the separator conwork mic doesn't have the Apple way manipulate this will never work if they declare compatibility apple I would contact them the possibility of the converter in default

• Firefox is very slow when you use RDP

  Firefox is fast when you use Windows directly. But when you use RDP it is very slow. For example, empty new tab takes about 6 seconds to open. The RDP connection is fast and another response programs immediately (for example the same page navigation in IE is fast).
  What is the problem with Firefox?

  Could it be the graphics hardware acceleration?

  You will need to probably restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.). On the remote system:

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  Then restart Firefox. Does make a difference?

• Internal mic has stoped working

  The internal mic on my computer laptop HP Pavilion touchsmart has stoped working.  Nobody can hear me on Skype and I can't make recordings on other programs, so I know its not only Skype.  How can I get that back?

  @ropro

  It is the newest audio driver custom for your combination of model and the operating system for laptop. You can download this (which will begin when you click on the link) and then uninstall your current driver, reboot the system, and then install the downloaded driver.

  Driver Audio of IDT high definition (HD)

  The link I gave you, for the resolution of the problems of micro there a difference?

• Satellite C650D - internal mic not working not

  Hello forum

  When I tried to cut the internal mic, I accidently deleted the pickup and its driver completely a few days from now.
  and after you have reinstalled the driver, I can't have the microphone to capture sound.

  I do not know if the internal MIC is visible in the tab "recording devices", what I see is "Conexant SmartAudio HD CX20671".

  Could be internal, might as well be the external microphone that I use sometimes.

  Help me please.

  Hi mate

  You can try reinstalling the Conexant audio driver again. Usually this should detect all devices audio and microphone, even if it was previously disabled.
  The driver can be found on the European driver Toshiba page.

  Another tip:
  You should check the audio settings in Control Panel-> Sound-> recording tab

  Here, you should see two entries: internal and external microphone mix that should not be permit/detected if the external microphone is not connected.
  The internal mic must be defined as a default!

• Siri/Voice SMS/front Mic camera does not

  I filed a complaint for this March 12 in an Apple Service Center, but they said mic is stuck can not fix it and already altered sound. I told them the only person use it and no way to alter what I force gave to another authorized service center before. Subsequently called Apple Icarus and filed a complaint it there too, they spoke to the engineer senior service center and said the mic is stuck and it may not cover warranty on hardware. I asked that he be coverable because it is a hardware failure only. They said going to escalate the issue and come back. But force got no response for 3 weeks. Later while I called again they said phone is already altered so that they do not solve the problem and closed the call. The other day itself while talking, I deleted that it is not altered and they spoke to engineer main to the Apple repair center and said will degenerate to issue of Mic only but now they have changed as altered the question and say he used be coverable. And I read many people get this problem and Apple does not give the right solution for this, and many have gotten their phone replaced by a new one (https://discussions.apple.com/message/26903590#26903590, https://discussions.apple.com/message/27685992#27685992, https://discussions.apple.com/message/27734486#27734486,.. .a much more)

  Sorry, but since this is a user to user forum, there's nothing we can do on Apple decisions.

  I'm afraid, you'll have to pay to get your device fixed by Apple.

• Built in mic has stopped working on my Satellite Pro T130

  Dear Forum,

  the microphone of my Satellite Pro T130 15F stopped working a couple of days at a time.

  It captures the white noise.
  But he responds only to knock on the place where it is located next to the built-in webcam. It does not pick up normal voice or cry out to him...

  Can't bring any changes to the software that could influence.

  What I've done so far: deleted drivers, installed new, updated all Toshiba Software and downloaded and run all the stuff suggested to this problem.
  And of course, it is not set to mute or upgraded to the bottom.

  Still no cure.
  What's next?

  Thanks much adavance.

  Hmmm, it makes a static noise? Kinda sounds like hardware related issue
  But check the microphone settings in the control panel-> sound-> recording tab
  Here, you should see two entries; internal microphone and external microphone port.
  The internal microphone must be turned on!

  In addition, the internal mic belongs to the webcam. In the assistant webcam-> settings-> audio tab, you can increase the maximum microphone volume.
  Check this box

• Satellite - how to set the mic to the voice through internal speakers?

  I Businese of Vista on my laptop satellite, but I don't remember what series Satellite was my laptop.
  I just want to know how can I configure my microphone on my laptop?

  I want to hear me through the notebook as I speak, I want to use a kaoroke through program, so I have to hear me as I sing.
  for the moment I can hear myself through the microphone, but the laptop tells me that the microphone is working correctly.

  HELP ~.

  You want to use the external microphone connected to the MIC port?
  Go to control panel and check the settings for audio and the Realtek audio Manager, if they are available.

• External microphone not detected and faulty internal mic on Satellite Pro U400

  I have had several headphones with microphone and taken headphones 3.5 and the laptop just will not detect them. I tried to disable the internal sound system, or just the MIC internal, but not luck.

  The internal MIC is a (stronger if the external microphone is plugged) whirring background noise which means I can't use it for work.

  Any help is appreciated!

  Which is really strange.
  Are you using the original recovery image Toshiba and Toshiba driver sound?

  U400 is older model laptop and I would like to know since when you have this problem.
  I can't imagine that you got from day1.

• Portege Z30-B-10v - internal mic stops working when I plug headphones

  I have Toshiba Portege Z30-B-10v.

  There is a problem when I plag in the internal microphone headset no longer works and I can't find possibilities how to turn it on.

  It has been found on both win7 and win10 platform

  any hint how to solve?

  THX

  B.

  somehow I know that if I have ony plugin 2/3 of jet Audio Combo jack it works this combination (external internal mic + headphones)
  but it is not acceptable

• Tecra R850 - internal MIC does not work when earphones are plugged

  I factory reset my laptop yesterday and all since the internal mic only works when nothing is plugged into the Jack, including the headphones without a microphone and speakers. This was never a problem before resetting factory and I was able to plug in headphones to hear from people and can use the microphone to talk... now I can only talk to people when nothing is plugged in the sense that I have not heard from people on the speakers of the laptop...

  Any ideas guys? I don't want to have to buy new headphones :/

  See you soon

  It's really crazy. With the factory settings, everything should be OK.
  Theoretically, internal microphone can be blocked if you connect headphones into the microphone port.
  If please check al and don't forget your helmet is connected on the right audio output port.

• HP envy printer range: HP envy with Win7 Remote Desktop RDP printing problem

  Hello

  I have a printer HP envy 5530 works well for my laptop.

  When I connect to my Win7 Remote Desktop Server (on which HP envy drivers are also installed) and try printing locally on my HP local printer, it does not work.

  When I look at my local mobile print queue, I see two copies of 'Remote Desktop redirected Printer Doc' contained in the queue. One of the queue said copies and then print. Impression size document in the print queue shows 4 KB that is abnormally low, then the missing documents from the print queue, but are not printed on the printer.

  Note that I have no problem with the same laptop, same Remote Desktop server, but using a different printer (not HP).

  I saw that on several forums (including this one), many users have this same problem but I've never seen a valid response that solves this problem with RDP.

  Any idea?

  Thank you

  I solved the problem by creating a new printer on the local computer and configure the port to the Standard TCP/IP port with the IP address of the printer and the HP Deskjet 6940 driver use. Deskjet 5500 driver may work as well.
  
  The problem is with the specific Envy 5530 driver.

• App Pro film and Rode microphone go external mic

  Hello!

  I have a question about my newly purchased Rode Mic go. Once connected, the filmic app Pro automatically selects the external microphone rather than the internal MIC - or what I have to do something with the audio settings in filmic Pro to make sure that the external microphone get used?

  I'm confused as to if I should use either of these settings: low mic iPhone / iPhone microphone, Front / iPhone microphone, back - or none of them?

  Thanks for any advice / help!

  Concerning

  Chris

  I have an iPhone 5s and I only use wireless headphones & it works via Bluetooth. The microphone is on the right earpiece, so I'm not sure your phone showing two or more mic mic positions. And why not this app say you exactly? Seems to me a CSI must be all in one? Your phone is much more advanced, so my only advice is to those who have made an email & ask them. Here I have given the best advice. Well good luck with that.

  Sincerely,

  Mrs.Gary ☺️

• MP3 player won't play not through the Mic - NB 550 d

  Hello

  MP3 player will not play to Mic Jack. Is it because I don't have DD Realtek Audio Manager Setup correctly?

  Also is it possible to play MP3 via a USB Port

  THX

  Hello

  What cell phone do you have?
  The mic jack records the audio signal. But I guess you want to use the mic line-in socket. Right?
  Usually, you need to set the default device in the recording tab.
  In Control Panel-> sound-> recording tab.

  If you don't see me not all other devices but only mic jack then you must right-click and should allow the options; Show hidden devices and show disabled devices.
  Maybe then, you can enable line.

  Otherwise, this option is not available and is not possible