micro usb audio on demand feature

so I got a pair on usb headset and I thought that it would work on my stream 7, due to the problem of snoring. But it does not work and windows dosnt seem to read or the other. Sort of an update of the bios for the 7 flow so mic audio output usb does not work and no matter what prgram hp for them to do, so I can use headphones.

Thank you jeff, you are much more clear. ill get bluetooth or usb 2.0 headset with an otg cable.

Tags: HP Tablets

Similar Questions

  • Micro USB by clicking on/buzz

    I tried two different USB microphones and on two of them, I get a constant clicking.
    The microphone still captures my voice underlying clicks so becomes sound micro usb.
    Even if I cut the usb mic in volume control clicks remain.
    Normal 3.5 mm microphone work fine and the USB microphones work fine on another computer.
    The computer I want to use micro USB one however get this rattling noise / hum.
    I installed the same drivers on the same OS, but just another computer.
    What could be? I checked every setting and driver, I can think.

    Audio of the by clicking on: http://speedy.sh/QBVF5/usbAudioClicking.mp3
    CAUTION: Clicking on fort ankles recording.

    Hello

    1 did you changes to the computer before the show?
    2. have you tried it with different USB ports?
    3 have. what troubleshooting measures you tried so far?

    Method 1: Diagnose and automatically fix problems audio and sound recording:
    http://support.Microsoft.com/mats/AudioRecording/
    Method 2: Uninstall and reinstall Sound drivers and see if that helps.
    (a) click Start, right click on computer.
    (b) click Properties, click the Hardware tab and click Device Manager
    (c) Expand video and game controllers, right click on the sound card option
    (d) click on uninstall
    (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.
    Method 3: To disable and re-enable the USB controllers, follow these steps:
    a. Click Start and then click Run.

    b. type devmgmt.msc, and then click OK. Device Manager opens.
    c. expand Bus USB controllers.
    Note: You need to scroll the list to find this point.
    d. right-click on the first USB controller under Bus USB controllers and then click on uninstall to remove it.
    e. Repeat step d for each USB controller is listed under Bus USB controllers.
    f. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
    g. check the USB device to see if it works.
  • Cannot use the Micro-USB port on the coming Pro 11?

    Hello

    Can I use the micro-USB port to a mouse or other device (with Dell micro-USB to USB dongle for tablets)?

    Bought one as advertised and does not work...

    Thank you

    Hey guys, it seems that there is still much confusion over the functions of the port mictousb on the place of the 11 sessions pro.

    Anyone know if it is possible to use it for anything other than recharging? An OTG cable connected I have here doen't work on my 7130, but on ebay, some sellers here in Germany offer small hubs with OTG funcion specially for this model:

    http://www.eBay.de/ITM/kwmobile-3In1-micro-USB-hub-adapter-fur-Dell-venue-11-Pro-Schwarz-Verteiler-Kit-/361194175623

    Does anyone know for sure who is the truth?

    EDIT: also, as the microusb port has the logo of bolt on I guess this is the port used for the powershare function (if this feature is enabled in the BIOS). Does this mean I have to buy a microusb to microusb cable to recharge my mobile hollow 11 meeting places powershare function?

  • Venue 11 micro usb is usb? the installed processor?

    Hello, I have a few questions

    I ordered a model

    Reference Dell place 11 Pro (7139/7130) 1
    CNV1J05 1
    Intel Core i5-4210Y 1 (3 MB, 1.5 Ghz) processor
    Intel Core i5-4300Y processor (3 MB Cache, clocked at 1.6 GHz, Dual Core) 1
    10.8 inches IPS Display with FHD (1920 x 1080) resolution with capacitive touch 10 - pt 1
    8-megapixel rear camera, 2MP front camera 1
    Ship: Ship Direct Pegatron 1

    the installed processor?

    micro usb is usb? or only power?

    I have to use a usb for software protection dongle

    interface midi usb audio for audio and

    Hello from the Italy

    Him 7130/7139 times come with the i5-4300Y, the difference being that the 7139 a reader of fingerprints for increased security.  The micro USB is designed to load, USB 3.0 is fully functional and must take into account your dongle for software protection.

    I hope this helps!

  • USB Audio sound problem

    Hi guys, my audio port on the laptop computer is broken, so I decided to buy a USB Sound Player it is a small device with 2 ports red and green

    and I'm using a speaker not wearing a helmet, so the problem is when I turn the volume the sound starts to Crackle make noise and I don't know what the problem
    I tested it on my friend and always the same dad PCs tested on XP & 7 & 8 same thing pls helppppp
    I changed the device usb audio and still

    Hi JasonCasedy,

    You use the audio enhancement features:
    1. Click Start and select Control Panel
    2. Select its
    3. Select your speakers and click Properties
    4. Go to the tab improvements
    You should see a list of parameters that include the environment, cancellation of the voice, Pitch Shift, Equalizer, Virtual Surround, intensity Surround sound, and Loudness equalization.

    You can also find this article useful.

  • Alcor micro usb 2.0 card reader works only on windows 7

    Hello!!!

    My alcor micro usb 2.0 card suddenly reader has stopped working on my asus laptop yesterday, when I tried to insert my SD memory card that it just shown for a few seconds, and then he disappeared under the "My computer" window, I checked on 'device manager' and there is a yellow triangle with an exclamation point above and under device status , I get this message: "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) »
    What I've tried so far:
    Uninstall/reinstall the driver (no need to update when he says that it is the most recent driver)
    Tried the microsoft tool to 'Fix' and it just says: "the problem was found, but changes could have been applied properly.
    Remove the battery from the laptop
    Tried to use my drive to SD memory on another computer and it works perfectly
    Here's something odd: I have win 7 and win 8 dualboot customer overview, I started victory 8 Overview client and inserted the SD memory card and it works beautifully.
    It also seems to work just fine when I boot using the 'safe mode' SD card is fully recognised.
    I would be grateful if you can help me please, I don't know what else to do.
    Features of my laptop:
    ASUS UL80Jt
    Windows 7 64-bit Sp1
    Intel core i3 cpu
    4 GB of ram
    Thanks in advance

    If it is recognized in safe mode you should perform a clean boot to try and isolated the program that is causing the problem.

    http://support.Microsoft.com/kb/929135

  • Save to USB audio in sync with the Facetime camera on FCPX

    Hello!

    So, I try to record video of a solo concert using the Facetime camera integrated on my MBP mid-2012, but using a USB audio device. I know I can use the function "voice over" Adding audio afterwards, but which then leads to an irritating noise constantly sync it all together...

    Is it possible (which I don't currently see) to save the external audio of the screen when I import video of the Facetime camera? Or y at - it another way to do it altogether?

    Thank you!!

    YYou can if you can set the audio input in system preferences.

  • Toshiba still 8 Micro USB does not, does not charge

    I have installed Nokia PC Suite on my Toshiba Encore 8 tablet and connected my laptop Nokia C1 via micro-USB on my tablet.

    Since then, my Toshiba still doesn't recognize not the USB port, two usb devices or, more important, for the load.

    My tablet is now only 8% load, and I need to get the USB charge function working again while I have still a few charges left in the tablet to make the necessary changes (drivers, BIOS etc.)

    Can anyone help before my Tablet becomes a brick died without charge to the left?

    Hello

    Looks like we have a similar problem, although I have a different tablet model (AT10-A) and I did not install anything whatsoever... still, I'm having the same issue on the micro-USB port: it does not recognize the Chargers and USB connections with my laptop. To the point where it says 5% battery. I'll try to keep it connected to the charger, even if the Tablet does not seem to see it.

    How can I test if the battery is really in charge?

    Have you received support from Toshiba?

    Thanks and best,
    Luca

  • USB audio interface with several input channels

    If I use a USB audio interface, and it has several entrances, can MainStage process each entry separately?

    Hello

    Yes

    TDC

  • External Usb Audio Card Popping and cracking sound with Satellite L500

    Greetings,

    My name is Boyan and I am from Bulgaria, and a year ago, I bought a laptop satellite l500 series (I can't tell which is exactly the model at the moment because my computer is not currently with me and my user manual, the only thing that is said is that it is for L505/L500/L500D / L505D.) But from memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal, because I gave him for repairs for the same problem that I say down below)

    The problem with my laptop, is that when I plug in a Usb Audio card in my laptop I have a crackling sound during live sound is played hollow map external speakers/headphones. I tried several sound cards and speakers/headpohnes which work perfectly well with other computers, including laptops, but the problem continues even when I use an external sound card to connect to the laptop not appearing in my laptop speakers/headphones.

    The problem is important only when the signal passes through an external audio card and it is very disruptive since I use my laptop to create music and I bought a sound card expenssive and speakers that can not be used with the laptop. I tried 3 types of sound cards:

    M-Audio Fast Track Pro

    BEHRINGER uca 222

    and a simple 3d audio usb audio card external and the problem persists.

    At first, I thought that the problem is software and I should install the new drivers, windows 7 automatically recognizes and installs the drivers for the devices and I have its in (but with the cracks and educated) so I tried using the official drivers sold for me with the sound cards, but without success: the problem was still there. I tried to find the new drivers of the sound cards on long official distributors and I downloaded it but the problem was still there. Then I tried to delete all the audio drivers on my computer and just use the external sound card for sound but this eighter helps force. I updated my drivers for my sound card build - in as well but again - no luck.

    After substantial thing frist I did when (2 weeks after I bought the laptop) was to contact the store where I bought my audio card and they said that the problem may be so eighter latency or high voltage of the laptop they advised me to try to reduce the latency of the parameters or to try and see if the problem persists if only my laptop running on battery power. I tried two things, and they did not help. Audio cards worked without problems on all the other computers I tried them but me. So they told me that the problem could not be audio cards.

    What I then was that I gave my laptop for the Distributor official of toshiba in my country so that they can solve my problem. What they told me, is that a problem with the version of windows which was preinstalled on my laptop and it was not compitable with the sound cards (which was bizzar survey because I tried them on the same windows and they worked, only on other computers). So I'm back from my laptop and passed under my Windows 7 Home Premium 64 bit operating system to Windows 7 Ultimate edition 64-bit and Windows 7 32-bit Ultimate edition on all versions, that's the problem: whenever I activate a low of passes of audio signal and Audio Usb card he heard cracks and educated. I even tried isntalling Windows XP, but the laptop want spesific SATA drivers for the Windows XP installation which although I found - they helped me install XP and I didn't go the BIOS of the computer to try to put a new and so on, because I'm not sure about that and I could lose my warranty so I said in the official repair shop for Toshiba in my city to put XP on my computer to solve the problem but they can't because they are not liscened to work with software that isn't a recipt for its purchase (which I did not because I bought my windows xp a long time ago and I lost the recipt)

    I gave her to get it repaired for the second time by telling them that the change of my operating system has not solved my problem and what they were doing was they changed the motherboard on my computer, indicating that the build in the device realtek audio on my computer is good enough to support a card usb audio or it may be broken and they change the whole motherboard because the generation of card is stuck, so they did it, but my problem has not been resolved. They told me that although I use and map external audio usb signal always going trough my only internal and I have to disable so I tried to disable this trough Control Panel, but this does not solve the problem and I don't have a BIOS option to disable my sound card build-in. Another thing I thought that maybe the problem is that two audio cards do not work on the same bitrate and Hertz so I put both cards to 16 bit 48000 Hz DVD quality (also tried the other options on the 3 cards that I have) but it's the same thing.

    They told me that it's just my luck and the construction of the sound card does not support this external sound cards and I would had been more careful when they choose to my laptop first.

    I couldn't accept this awnser for several reasons:

    (1) this sound card works on a lower version of windows and are supported by many older models of Realtek and a lot of old computers (one of them bought 2000! and my laptop is of 2010!)

    (2) the guys who were the apperantley of fixing problem don't go so deeply into my problem because they didn't know that in fact the problem was that only they knew that there is a problem with the audio card and the computer interact with them, they knew not that it cracks during the direct play the external audio card.

    (3) I can't accept the fact that Toshiba is manufacturing of models with maps audio chipset that cannot support a simple external Usb Audio card. It is totally unacceptable to me, and I sincerely hope that this is not the case!

    (4) they have tried my audiocards on another laptop of the same series, claiming that they have not at their dispossal at the moment so I'll go tomorrow at a local store and try the sound cards by myself on the same computer in the store.

    What I have now, it was that I gave my laptop for repair requesting a statement of the problem in wrtting with details of the problem so I can go to court or ask for a new laptop, but I'll be charged with little money because according to them there is no problem in the laptop and the problem is that my external sound cards are not compitable with the build in house chipset sound card. If I give my laptop for repair, and there is no hardware problem, I'll have to pay the money. I will do this, but I'm now crazy, because that does not solve my problem and I am wasting time and money.

    What I ask here is, if you can not help me solve my problem and advice me what to do to fix it, please give me the details of the chipset built in Driver sound card on my motherboard, so I can check if it is compitable with my external sound cards and contact the dealers of the sound card to ask them their opinion. Or if you can tell me what it is compitable with and what not, that would be great. Personally, I think this laptop should have no problem at all with a simple external usb running sound card, but I ask you, if you know something more about it.

    If a problem with the build in chipset then Toshiba is manufacturing (or at least sell) audiocards which are not in a normal standart but unfortunately I can not do nothing except complain to Toshiba and never treat whith such productgs more. Otherwise, if this is not true, then my laptop has a problem that is different and I have to go to court with the mans for mounting repair is not my laptop or do not give a new one when I guarantee will not fault of Toshiba and it will be in a way solve my problem.

    I hope that you understand how important it is for me and I hope I have fix the problem as soon as possible.

    P.S

    I want to say that I am familiar with grammar mistakes, that I did in the text below, and I would ask your excuses that I'm not a native speaker of English.

    Hi, I would just say that I had a similar failure although I wouldn't be surprised if she causing of yours, but you never have knowledge, my fault was the lid of my laptop [9 months], it contains the mic and when the lid has been in a certain angle cracks could be heard worse when I got my external sound card all the time it happened, luck, PS, it's a defective membrane [lid to the body] easily missed by engineer because he was the same angle you English is very good

    Post edited by: sido1

  • Will I buy the HP Slate charge Port cable 7 4601 Micro USB DC

    Will I buy the HP Slate charge Port cable 7 4601 Micro USB DC

    Do you mean the cable separately or the power adapter is complete?

    You can buy the complete adapter of www.shopping.hp.com. Select and then tablets Tablet adapters

    You can use more cel phone usb micro cables. I use my Samsung phone cable from time to time. You can probably buy one at any cel phone shop or even a WalMart.

  • Dynadock - USB Audio broken broken kaput (white noise)

    don't know what caused this, but I use a Dynadock until Monday USB audio was fine then it started making a sound crackling white. I thought was temporary as was just leaving work but in return today is to do the same thing. A bit of google leads me to think that this is not uncommon.

    I reinstalled Dynadock software (latest version of the Toshiba site)
    I reinstalled the sound drivers Conexant (latest version from the Toshiba site - but don't think it's the last according to update Vista - did I mention Vista?)  ;) and works fine
    After a lot of research because it doesn't seem to be available on the Toshiba site I found a Driver and installed 106 C Media (which is what it was before), and the white noise is still there.

    I guess it's a Vista / driver issue?

    Includes also means there is no way round without any system restore to a previous point and hope it goes away, then select each update
    or wait for a new driver, but without knowing who owns or when it might be?

    Is there an alternative? I use the cradle most of the time so it is a real pain in the rear.

    Not a happy Bunny! Can anyone help please? What is someone having the same problem?

    Thanks in advance.

    t

    Hello Tim

    Your ad is quite confusing, and I cannot understand what you did and wrote about all the audio drivers. In my opinion, you should own Dynadock installation and configuration.

    Disconnect the Dynadock from the system and remove all the stuff pre-installed. Download Vista Dynadock Utility 2.3 c correctly. Follow the on-screen menu and please, do not interrupt utility installation.

    Dynadock Utility will install all the stuff you need, and I hope that you will be able to reuse this nice external device. Of course, I hope that the sound will be OK again.

  • IdeaPad A1 How can I open the micro-USB port

    How do you get into the Micro USB port on the bottom of the A1? You just lift it?

    There are no instructions with the unit on how to open it.

    Tinybeetle,

    A quick...

    With the A1 facing upward, push on the left side of the tab covering the microphone port. He opens and switch upwards or downwards, and stay connected to the right side.

    I hope this helps!

    Greg

  • Satellite M40: USB Audio does not work properly in ACPI mode

    Hi all
    I just bought a laptop Satellite M40 whose purpose is to be used as a portable audio system.
    For this, the USB audio devices are an excellent solution.

    Unfortunately, although it was working properly when recording (sound is perfect with all devices compatible USB Audio, I have tested), there is a problem in reading that I had a lot of clicks and POPs.

    After a lot of research trying and google, I solved the problem by changing the computer ACPI PC Standard mode.
    This is a workaround.

    But this way, I don't remember what my status of battery, and my laptop does not shut down automatically.
    Actually, my laptop is no longer run as a laptop :(

    I suspect a very serious problem in a Toshiba components management. In particular, I wouldn't be surprised to be told that freeze the cords of some regular system of court management, and therefore the 10ms buffers audio USB fall in against the recess.

    This would be so much bother me if I were not part of the technical support team of the company that launches also a few new audio USB products who will not fail to work correctly with laptops.

    My question is:
    Is there a driver / updating bios that gets rid of this problem?
    If a person of Toshiba technical support to address this issue directly with me, I'd be happy to help, as I am personally and professionally concerned.

    Thanks in advance.

    [Edited by: admin]

    Hello

    I put t know what USB audio device you use, but most of the USB audio devices cannot use the USB power. These devices have need of an external power supply of A.C and especially this external power supplies are delivered with the USB audio device.

    Also, I read on some sites that the pop occurs sometimes due to non synchronicity of the modules different buffers or / and of the use of certain applications in parallel.

    The computer ACPI PC Standard mode change is one of the many solutions and proposals
    You can check some patches from Microsoft. Check if all updates from Microsoft are installed.
    Also change the performance options in the options of the system to adjust for best performance.
    Disable Windows messenger.
    Virtual memory should be set to custom size and initial size and maximum size must has the same value (ie. 512/512)
    In the system.ini should the vcache is also the same: MinFileCache = 16384, MaxFileCache = 16384
    Disable the peripherals such as scanner, printer.

    As you can see, these issues could occur on all computers (desktop and laptop) and it s is not a problem of Toshiba. Also, contact the manufacturer for support external audio device and detailed information.

    Good luck

  • Black 2 10 port micro-USB Tablet

    Hello

    I am the owner of a new black 2 10 Tablet and I would like to know the use of the micro-USB port.

    Thank you very much

    Hello

    I received information from Technical Support. With the right cable (USB Host /OTG) it's OK. Now, I can connect my camera, recorder video, external hard drive, USB key, etc...

    Thank you very much

    Christian

Maybe you are looking for