Microphone is no longer recognized on Satellite U

Similar Questions

• Microphone does not work on the Satellite L830 - 10 p

  Hello

  I use my new computer laptop satellite L830 - 10 p for three months.

  At the beginning everything worked well.

  Then, suddenly, the microphone not working.
  I checked and found that the * microphone is not more recognized as a device *.

  I have reinstall the driver (sound - 20120726122105.zip) and it worked again for a while and stopped again at work.

  I try to reinstall the driver again and even it won't work anymore.

  I don't know if it's a hardware or software problem, and what I could do to fix it?

  Thank you for the help

  B.

  Hi Bernard

  I think that this isn't a hardware problem.
  There must be something wrong with the driver and software sound.
  It seems that more audio drivers must be installed because page driver Toshiba UE provides 3 audio drivers do you feel for this device.

  * Sound driver Conexant v 8.51.2.64 *.
  * Sound driver ATI v 7.12.0.7705 *.
  * Sound driver SRS v 1.12.1800 *.

  I recommend you to uninstall the three drivers of the system first.
  Download the mentioned drivers, then restart the device
  After that, follow with the installation of Conexant, ati driver and srs

• Toshiba 500 GB external hard drive is no longer recognized

  I have a Toshiba 500 GB USB 3.5 "external hard drive of office which was working perfectly until what a few days, but now it is no longer recognized by my computer (the device does not appear on"my computer"as it used to). Help, please!

  I had a similar problem with drive external 3.5 ". After a trip he stop working. In my case, the index has been connected to the PC (not portable) IDE channel and formatting.

• Y50-70 - USB Reader and card reader no longer recognized

  I have Lenovo Y50-70 (running Windows 10) and my WD My Passport Ultra external drives are more recognized (they worked fine until 3 days ago). My card reader CF is no longer recognized either. My Samsung Galaxy S5 works well.

  The WD My Passport drives Ultra both my card reader still work with my older ThinkPad, which works in Windows 7. This isn't a disc problem, or a cable problem.

  When I look in devices and printers, the WD My Passport Ultra appears. It has the following warning sign for troubleshooting option. When I troubleshoot it comes back telling me that the driver is not installed. Continuing, he finds the driver, install it and asks to restart the computer. After the computer restarts, the drive still does not appear.

  When you look at the properties of the drive, it says that the driver is not installed and an error code 28 the list.

  Comment to Moderator: The model is added to the object for clarity.

  fgossieaux wrote:

  Thanks Bill - Sorry for not being specific. Both my WD drives (which have no external power sources) that my card reader does not work. I tried to remove the drivers and rebooted the computer, but none of it works.

  You can try to restore to a date (three or four days before the problem) and see if you have the problem solved.

• 16GB SD card is no longer recognized as such

  I have two identical cards of SD 16 GB used for 6 months or more without any problem.  Recently formatted on a VISTA computer.  Now is no longer recognized as an SD card.  Works well as a high capacity flash drive.  Any way to restore the map as a 16 GB SD card?

  Tried to format on different computers and operating systems, including Vista and Windows 7.  No luck.  Stuck the card in the camera and once more a message of "Check Card".  Decided to go and try to format the card using the camera.  It worked!  The card is again recognized as a card SD Cam by the camera as well as the different computers.  Appreciate your response.  Thank you.

• Installation of XP is no longer recognized by the Setup disk after Format of Partition

  Hey all,.

  In short, my problem is that I have an installation of XP (home or professional) intact windows, but after deleting another partition, the computer does not start to it. My question is what are all the things needed for a computer can be started on the windows partition - even just to the loading screen (which files are needed on the partition, for example boot.ini file, which must be in the MBR, how to mark a partition as bootable; etc.). Here is a description of exactly what has happened and what is the current situation:

  I was working on a friend's computer, and he asked me to delete the partition that it has not been used (D) and melt in his primary partition (C) where was the installation of Windows. I used a program called Easeus to format the partition for Windows let me to merge. The program asks for a restart, and then it is initialized to a screen where he deleted the partition, then restarted once again, probably to load Windows.

  That's where the trouble starts. Instead of windows, I have nothing else than a cursor flashing ("_") in the upper left of the screen. After 60 seconds, nothing was. I rebooted a couple of times, still no windows.

  The first thing I tried was to throw the disc to reinstall the window. I got to the screen configuration and supported on entry to choose a windows installation to repair, however he could not find one on the drive C (or D). I then tried to install Windows on drive D, hoping at least to be able to access the files on your computer with a parallel installation and then clean things later, but the installation struck a BSOD (sorry I don't have the message). The last thing I tried using the recovery console, but the only one installation of Windows that he found was on the D drive (I guess it was the remains of the failed installation that I had tried just because it contained only a few system files).

  So I still need an operating system to access the files on the C drive, so I did an installation of Fedora Linux (on a small new partition in drive D). I could check on the files and they were all intact, including the Windows system files. I could not find anything wrong with the partition, except for the apparent absence of a file boot.ini on drive C. I tried to add a boot.ini file by default (even though I wasn't sure exactly what should be in it). I can only assume that when my friend had the computer built with partition by a local technology company, they did the D drive partition bootable, but put the Windows files on the C drive. It makes no sense, but I can't find any other reason format another partition that windows would make it unbootable.

  The problem is, now, I have GRUB installed to Fedora. GRUB cannot boot directly on Windows, so he has to begin on an another bootloader that can. I think I have GRUB pointing to the right partition, but I get an error message. So, what I want to know from a point of view of Windows is everything necessary for a successful boot, assuming I can get GRUB to work on his end. What should a healthy Windows boot look - exactly, what should happen?

  The other option, of course, must do a fresh install of Windows on drive C (and hope for no BSOD more). I could put all the files on the partition of Fedora and move them back after the relocation. So what you think - is it worth a try even to save the current installation of Windows?

  Feel free to ask questions or for clarification. I have a limited capacity to test things, I have to wait until I can get to his computer. Your help is very appreciated!

  -Thomas

  Hey thanks for the reply guys. Just for the record, I posted that thread on WindowsForums, and I got good results. If anyone is looking for an answer, here's the link to the thread. Sorry, I should have scored as before, but thanks to you both for your help!

  http://windowsforums.org/topic/5097-XP-installation-no-longer-recognized-after-formatting-other-partition/page__pid__16201

  -Thomas

• My Maxtor Basics portable storage is no longer recognized by my laptop

  I plugged my storage device, and it was all first acknowledged however when I tried to copy files it there is an error message comes back to say no can do. I then removed the usb and tried again and the device was no longer recognized. I have since tried to get my laptop to recognize but hopeless... There are thousands of photos and music and University work on this unit!

  Help

  
  

  Kayleigh

  The case holding the Maxtor no longer works or the Maxtor drive itself is a failure. Your first step is to contact their technical support.

  http://www.Seagate.com/www/en-us/support/

  It is a perfect illustration of the reason why you cannot rely only on an external hard drive for backup. You have to burn to DVD - R on occasion or using a service like Mozy offsite backup. Hard drives are mechanical devices, and like any other mechanical device, they can fail.

  If Maxtor (Seagate) tech support determines that your hard drive has failed, you can still get the data on it, but only by sending the drive to a professional data recovery company. I use Drive Savers for my clients, but there are others. Professional data recovery is quite expensive, running with an average of about 2700 $ $500-$3500. MS - MVP - Elephant Boy computers - don't panic!

• Sony DSC-F707 camera is no longer recognized by Windows 8.1

  After you have installed Windows 8.1 my camera Sony DSC-F707 is no longer recognized and I can not upload photos, the message says there is a driver problem.  Sony said the driver must reside in point 8.1 of Windows, but apparently is not.  Any suggestions?

  Hi illinichip! Please try this link on troubleshooting suggestions to isolate the problem regarding the DSC-F707 camera not recognized by your computer Windows 8.1. I hope this helps.

• CS6 Master Collection key is no longer recognized

  Not sure if this is the right place for this question, but this is... out of the blue, my product key for the CS6 Master Collection is no longer recognized and I was back to a free 30-day trial version. Could someone please take a look at this and help me with the problem?

  Hi Barry,.

  You can try to uninstall and reinstall the Creative Suite 6, also if you have any creative cloud apps installed remove them thus:

  To uninstall see, Uninstall Creative Suite | CS5, CS5.5, CS6

  See also, Learn how to enable or disable Adobe apps.

  Download here: download Creative Suite 6 applications

  Kind regards

  Bani

• My account at work is no longer recognized

  After a clean install of Windows 10 on some new HDs on my computer, my Adobe Creative Cloud account - put in place by my institution - is no longer recognized. The link of/go/manage_team in redirects email from welcome to the main page of Adobe (version/name;) "I'm at the Canada), and all products are now on 'Try' instead of the installation when I use the application of creative cloud Manager.

  The e-mail address used to create the account is always recognized - I have reset my password several times, trying different things, so I don't know the email address/Adobe ID used to create the CC account still exists. But it is no longer recognized as a narrative full of the CC. That is what it is?

  Are you sure you are using good Adobe ID to connect with creative cloud? Please try: https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html and share your order number and the e-mail address in a private message where you need help.

• My Adobe ID is no longer recognized.

  My Adobe ID is no longer recognized.

  Obviously I'm loggin in there with a different Adobe ID.

• VMDK is no longer recognized after cold move

  As part of the migration of storage of a data to another store, I close the machine virtual and made a gesture of 3 files vmdk to a data to another store.

  After the move is completed, 2 3 come vmdk files fine with the virtual machine, but the 3rd vmdk and also the largest 200 GB now is no longer recognized as a hard file. I have attached a screenshot.

  Is anyway to fix what looks like a corrupted hard? Any suggestions would be welcome.

  Except for the last two lines with the ' ~ ' the vmdk file looks ok. Please remove the last two lines of the vmdk file, to make sure that this does not invalidate the file. If you are not familiar with vi (dd deletes a line), you can use nano (nano w HOTWVGEUAT01_2.vmdk)

  If this does not please compare the file vmdk with another of the differences (apart from size).

  André

• External microphone no longer works on Satellite M40 PSM44

  Hello
  I have the problem with the external microphone on my satellite M40 PSM44. When I connect it do all the settings its fine for a while to work.

  All of a sudden it stop working. After that I had to uninstall audio drivers and install it again and it still works for awhile.

  This happens often when calling scype. Is it that someone who can help me with my troubles?

  Thank you! :-)

  Hello

  A friend of mine had a similar problem in his notebook.
  But it happened after installing certain applications to listen to internet radio exploited? ¦
  Seem different programs has a bad influence on the allowed sound? ¦

  Some M40 models support the Realtek ALC AC97 250 sound of chipa? ¦
  Go to the website of realtek and download the latest audio driver supported.
  The update should helpsa? ¦

• After update BIOS USB Ports not recognized on Satellite L500

  Hello!

  After a BIOS update to 2.1, two of my three USB Ports no longer work. Is it possible to downgrade to the previous BIOS? Or what else could cause this problem?

  The system is a Satellite L500 - 153 (PSJ3E)

  Post edited by: koocho

  Go to Device Manager.
  Remove all USB hubs and USB controllers in the list of devices.
  Restart the computer and wait for Win has recognized and installed again all USB devices.
  Then test the USB feature.

• USB no longer works on Satellite T230

  HelloW,
  I use the Satellite T230 (Windows 7 64-bit) for about a month.
  Once one of the USB ports stopped working. USB-drives are not recognized at all, a mouse - the note is simply a repeating beep. That USB port doen't see a USB key during startup.
  Everything works with a different port.

  I tried the system recovery, update the BIOS. Nothing helps.

  I am really angry and don't know what to do.

  Thanks for any help

  Hi Yu_1,

  > I tried system recovery, update the BIOS. Nothing helps.
  System recovery means that you have already reinstalled Windows from Toshiba disk recovery and HARD drive recovery?

  If so, I think that you have tried everything you can do and it looks like a hardware malfunction :(

  So as next step, contact a service provider allowed in your country and ask the guys for help. They can solve your problem. I think that it s mainboard issue because the USB ports are set on it.
  If your laptop is under warranty, the repair would be free :)

  Here is a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT