Microsoft 'Fix - it' created a restore point of its own

Similar Questions

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• Shadow Copy Provider cannot create system restore point error Ox8004230F?

  When I try to create a system restore on my Vista operating system, you get the above error message.
  I have entered what has been suggested in the forums and Services.
  What should I do now?
  Thanks for you help.

  When researching other forums via Google, I found this in 'My Digital Life '.  It solved my problem so I post here to help people who may have tried all the "fix - its" that did not work!

  "The error occurs because the Microsoft Software Shadow Copy Provider service is stopped or disabled. The Microsoft Software Shadow Copy Provider Service manages shadow copies of volume based on software taken by the Volume Shadow Copy service. If this service is stopped, shadow copies of volume based on software cannot be managed. If this service is disabled, as when you manually disable the snapshot, all services that explicitly depend on it will fail to start. "

  The Shadow Copy Provider MS and the shadow copy of Volume must be enabled.  With my problem I'm not far enough to allow the Shadow Copy Provider MS.  When I did, it has allowed me to create a restore point.

  Thank you.

• When I try to create a restore point, I get this message: Systempropertiesprotection.exe - corrupted file.

  When I try to create a restoration point, a message is displayed on the lower right part of the screen and I get this message: Systempropertiesprotection.exe - corrupted file.
  In addition, it tells me to run Chkdsk. I am doing and not of results. If I search for the file, Systempropertiesprotection.exe happens in several different directories along with one. Record of MUI with the same name. The computer seems to work very well, but my suspicions are triggered. Any suggestions?

  Hi Popo75,

  Let us try the following steps to solve the problem.

  Step 1

  Sometimes the malware could have disabled the files. Try to run an online scan and see if it helps.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  If this does not help, try the next step.

  Step 2

  Try to run the Design Checker (SFC.exe) system files and check if the problem persists.  To do this, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  Check the link for more information:

  http://support.Microsoft.com/kb/936212

  Step 3

  If the problem persists, create a new user account and check if you still have the problem:

  To create a new user profile:

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  Check out the link for more information on creating a new account below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer or useful you help others find the answer more quickly.].

• creating a restore point gives error 0 x 80042308: the specified object could not be found

  What is the specified object cannot be found - 0 x 80042308? trying to create a restore point in the protection system?

  a snapshot could not be created, please check "vss" and "spp" applications for more information event logs!

  Details: the specified object is not found! backup and restore system keeps giving me these messages!

  HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!

  Thank you!

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 3:
  Try the running System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

  It will be useful.

• Failed to create system restore point exception exception c:\windows\system32\shell32.dll,control_rundll,"c:\windows\system32\sysbm.cpl",system

  Original title: I can't do a restore point.

  I get exception c:\windows\system32\shell32.dll,control_rundll,"c:\windows\system32\sysbm.cpl",system what can I do?

  This has happened for a very long time.

  Does really say '... sysdm.cpl "?"

  Is that what the text complete and accurate of what the message said exactly?  (there is no sysbm.cpl in XP, but there's a sysdm.cpl).

  What happens if you click on start, run and enter in the box:

  sysdm.cpl

  Click OK - the system properties box opens?

  What happens if you click on start, run and in the type box (exactly):

  %SystemRoot%\System32\restore\rstrui.exe

  Click OK - is the open window of the system restore?

  What is exactly the process (step by step) you are using when you try to create the restore point and when in the process you see this message?

  I think it's a miracle that the Microsoft support engineer can provide a link to an article when the error message report you is a little out of whack and articles doesn't mention your error message at all.  It's real good troubleshooting or clairvoyance!

  You should also tell us a little about your system:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Why my WinXP Media Center will not create a restore point?

  For some reason, I just tried to create a Restore Point manually. I see that none have been created and stored in the past. I also see that it is turned on, because it is unchecked to enable the system restore on the system restore settings. So why, when I check create A Restore Point and click Next and write a description and click on create, make a box that says that system restore is not able to create a restore point? He also says if he please restart the computer and restart System Restore.

  I tried and it does not at all. Just the same thing happen again.

  Fixed! I decided to turn the system restore settings on the Restore page of the system (which will scan all the nonexistent restore points!) and then turn it back on. Now, he lets me create a Restore Point. I called him restore test, and now I see that on the list of the points of restoration as the only restore point. This list was empty before and no days were clouded on the calendar on this page.

• How to create a restore point in the protection of the system in safe mode?

  As topic the question, how to create a restore point in the protection of the system in safe mode?

  Hello

  read a tutorial on the below link for everything you need to know about the system restore

  http://www.bleepingcomputer.com/tutorials/tutorial143.html

  and read this too

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

• try to upgrade windows 7 Home premium to professional windows, has at any time not to create a restore point

  trying to upgrade from windows 7 Home Edition premium professional windows7, trying to upgrade, but then the error message indicates that no matter when to not create a restore point.  I then follow the instructions on how to open a restore point and it still does not work.  Help

  I would suggest you stop and restart the following services:

  Shadow copy volume

  Windows backup

  After that, you can temporarily uninstall the antivirus and rerun Windows Anytime Upgrade again to boot .

  Click Start, type: services

  Press enter

  Scroll down and select each service, stop and restart again.

  =======================================================================

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• If I create a restore point I have the driver of his old job

  I got this notice:

  "Dear customer,
  You will enjoy its improvement when you use an updated on the pre-installed sound system audio driver
  on your laptop.
  To install the updated audio driver follow the steps below:
  1. Click Start and select Control Panel.
  2. in the Control Panel Home view, click on uninstall a program
  3. Select Realtek High Definition Audio Driver and uninstall the driver by following the instructions
  the screen.
  4 download the driver updated on the Toshiba site
  http://support.toshiba-tro.de/Tedd-files2/0/sound-20080305155003.zip
  5 unzip the downloaded driver.
  6. switch to the folder driver and double-click Setup.exe to start the installation.
  7 follow the instructions on the screen. »

  Can I ask

  If I create a restore before ding, if everything goes wrong I will be able to restore the system and have the former driver of his work?

  The driver file is located in the Device Manager and sound, video and game controllers?

  Thank you very much.

  Peter

  Hi Peter,.

  Yes, if you need to create the restore point before you perform the driver installation, you will be able to restore the system to the point of time at the beginning then you will get the old audio driver on your system.

  I think it's a good idea to create the restore point.

  Good bye

• Failed to create the restore point

  Hello

  I think I can off the coast caused a problem if I ever recover my laptop which is a Pro L450D phone by changing the settings in the system protection box in windows 7.

  I was looking to create a restore point before I upgraded to Windows 7 with service pack 1 and in the creation and restore area I noticed that 3 disks were available to have system protection turned on but only 1 was actually activated system protection? OS Install (C) had no active protection system and I think the recovery partition, WinRE (D) allowing for the protection system was the system disk, I'm not sure at 100%, but of course the 3rd entrance was my DVD player, in any case what I did I clicked to turn on protection for the disk OS Install (C) and an error pops up saying that it was not possible I clicked on ok and when this error went off the screen I noticed that the drive is now enabled for the protection of the system, but he was now also the system disk? and the 3rd disk seemed to disappeared from the region where the available drives appear? I'm a t a loss as to what happened but I think the worst cases, it's that if I ever want to recover my system through the recovery options, I'm not able to by changing the settings of the system, any help on this will be appreciated, I created the recovery disc when I first bought the laptop before I did anything else still with a bit of luck , I hope that this will be my go out the wrong card if I need to use or restore the system in this way.

  Thanks in advance for any help.

  Hi stevieboyfitzy,

  Do you want to create a restore with the built-in Windows software point or what software you used?

  Well, if you are installing Service Pack 1 I put t he of needed to create an additional restore point. I installed Windows 7 Service Pack 1 on both my notebooks and installation was operating normally, no problem.
  In addition, I would like to make a backup of all important files on an external drive such as USB HDD.

  If you have already created the Toshiba Recovery disk that you are on the safe side. In the case where I would go something wrong, you are always able to restore the original settings. ;)

• Compac presario CQ5504F don't give me a place to create a restore point.

  It gives me no place to set a restore point. All the it geves is restore points generated by computer and no place to install my own. What I am doing wrong?

  In the search programs and files box, type system restore and wait a second. Above to select Create a restore point ant the next window appears.

  

  Make sure the Protection settings are on the disk for which you want to create a restore point. Select the drive and click on create. I don't use it because I keep images on my disks on a storage devive attached to the separate network.

• Failed to create the restore point: XP Sp3; System Restore is on

  Found this on a friends PC trying to go back to a previous restore point and didn't find any.

  • System/enabled - system restore properties shows it monitors the drive C (the only one)
  • Run ChkDsk & reboots
  • Searched and found, System Volume Information, hover over the shows as empty
  • System Restore reinstalled by right click on c:\Windows\inf\sr.inf and choice of installation
  • I tried Safe Mode option but to create a Restore Point is missing
  • Tried to reboot f8 last good known configuration, still the same
  • Tried to search the Web but without success except one referring to HKEY_LOCAL_MACHINE-System-CurrentControlSet-Services------VxD-VxDMon, but this does not exist in the registry!
  • No relevant event in the event log

  OK, so I'm out of ideas now! Can someone please shed some light on this?
  AVG free is AntiVirus software.

  Thank you very much

  Chris

  What works has been uninstall IE8.

  Windows search, System Restore and the laminates in IE6 now work correctly.  The re installation of IE8 then worked with everything works well in the end.

  Thanks for the helpful tips.

• I can not create a restore point.

  When I click on the system, System Properties Protection opens. Is there a way I can turn on the system restore and create a restore mode without failure point?

  Hello

  Why do you want to create a Restore Point?

  What is the problem with your computer?

  And you can not create a Restore Point, today, yesterday, or last week, etc.

  You cannot create a Restore Point in history (previous date and time)

  You can create a Restore Point for today, to use at some point in the future.

  See you soon.

• System Restore does not allow me to create a restore point

  sys restore does not allow me to create a restore point

  Hello

  Please ensure that you follow these steps:

  1. System opened by clicking on the button start , by clicking on Control Panel, clickingSystem and Maintenance and then click System.

  2. In the left pane, click System Protection if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click the System Protection tab and then click on create.

  4. In the System Protection dialog box, type a description, and then click on create.