Microsoft fixit will not work

Similar Questions

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Microsoft Update will not work

  Microsoft Update will not run through Internet Explorer.

  I seem to encounter two different errors and there seems to be no trend about which error appears where or when or why.

  One is 0x800A138F: the site has encountered a problem and cannot display the page you are trying to view.

  I don't remember exactly what it was or said, but it was similar.

  I tried the solutions so far:

  -restart the computer, internet, etc.

  -added the Windows Update and Microsoft Update for Trusted Sites (I did years ago)

  -reset of Trusted Sites as the Internet zone settings

  -connected Microsoft Fix - It here: http://support.microsoft.com/mats/windows_update/en-us

  -a attempted to run the windowsupdate.diagcab from here: http://support.microsoft.com/gp/windows-update-issues?wa=wsignin1.0

  As with many other users of this forum, I can't run this .diagcab file. Looking at the many messages on this file, no one has yet solved anything. It seems that Microsoft has yet to recognize or acknowledge that they're providing a tool that is unusable. I hope I've provided enough information to lead to a resolution. I also sent a report through the Fix - It tool when it has not changed anything.

  Hello

  Please go to the Microsoft Community Forums.
   
  You did changes to the computer before the show?
   
  I suggest to refer to the links and follow the steps in the articles:
  Error message when you search for updates on the Windows Update site: "0X800A138F: there are no updates available at this time."
  http://support.Microsoft.com/kb/326253
  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  Note: You should not turn off Windows Firewall unless you have another firewall enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
   
  I hope this helps.

• I just bought a used with xp on it computer, after that getting hook up to the net microsoft update will not work.

  He said that what ep is running on another computer or block by microsoft. How can I resovled this.thanks andrew

  Hi ford30705,

  1. What is the full error message that you receive?

  2 are you able to access all other websites properly on the computer?

  Windows Update will not work if the copy of Windows XP is not enabled on the computer.

  Type the command at the command prompt to find out the status of activation on computers below.

  oobe/msoobe /a

• The tablet of Microsoft Surface will not work with my printer HP Photosmart 5510 current wireless?

  I need to get a new laptop as my only current becomes slow and unresponsive, so I thought I'd do a Microsoft Surface tablet when they become available. I only bought my printer a couple of months, and it would really be a guy, if it was not compatible with the Surface.

  Also, I downloaded the Windows 8 Preview of consumers, and in trying to connect my printer, it wouldn't install because it did not support the operating system, telling me to make sure I was using XP or Win 7. After a few weeks, I returned to windows 7. Does this mean that my printer will not work with any version of Windows 8, either on a tablet or PC?
  I thank in advance.

  HP alone are responsible for the support of pilot and he will be at their discretion. If it is a very recent model, HP will probably out drivers more or less at the same time as Windows 8 in fact for the shelves of stores...

• I used "fixit" Microsoft down load and now none of the Microsoft products will NOT work.

  original title: used fixit now produced microsoft give me an error message

  FixIt

  They open and send error messages to the server.  How to rid my machine of fixit?

  Hi KDMohn,

   
  1. who is the operating system installed on your computer?
  2. who is the Microsoft Fixit you used?
  3. What are the Microsoft products you're talking about?
  4. What are the error messages you get?
  
  You can perform a restore of the system to a previous point, when the issue was not present.
  | The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.
   
  For users of XP system restore.
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084
   
  Users of system restore for Windows Vista and Windows 7.
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
   
   
  I hope this helps.
   
  Thank you.

• Microsoft Silverlight will not work

  I'm an avid Netflix Viewer, but from today it doesn't let me watch anything due to a problem with the download of Silverlight. Here's the exact message I received:

  You have encountered a problem specific to Silverlight from Microsoft, the software used to watch movies on the site Web of Netflix. This problem is often solved by uninstalling and then reinstalling Microsoft Silverlight on your computer.

  To uninstall Microsoft Silverlight on your Windows computer, please follow these steps:

  1. Close the open windows of the browser
  2. Click the Start button.
  3. Select the control panel.
  4. Select programs & features.
  5. Find and click on Microsoft Silverlight
  6. Choose uninstall.

  After completing the steps above, attempting to look instantly on http://www.Netflix.com/ invites you to reinstall Microsoft Silverlight.

  I did it twice, but it still does not work. I downloaded Stopzilla, an anti-virus program, maybe who have incurred it?

  Thank you very much for your time!

  Madeleine

  Hi, Madeleine,.

  What security software you have on your laptop?  If Stopzilla appears under programs and features, I recommend to uninstall.

  Then, download and install the free version of MBAM and SUPERAntiSpyware on the links below.

  MBAM

  SUPERAntiSpyware

  When it is installed, run full scans with these two utilities.  If they find something, delete it and re-run the scans.

  I would like to know how this happens and what software (other than Stopzilla) security you have installed.

  Kind regards

  DP - K

• I have a Dell Dimension 4500 Windows XP Pro SP 2. I have a new installation disk. Windows Update will not work and Microsoft Update will not work either. What Miss me?

  Pentium 4 CPU

  1 GB of RAM.

  Win XP Pro - SP 2

  Dell Dimension 4500

  If it will not download from this link on your PC, try another and just use a USB key to copy on you and then run it. Once installed SP 3, and then the fun begins because there are about 100 + updates after her.

• Microsoft fixit downloads but will not work

  Can help any body patch Microsoft it load, accept the license agreement, but will not work

  Hello

  I am glad that you posted the question in the Microsoft Community.

  1 when was the last time you were able to run the FIXIT?

  2. you have any anti-virus installed on the computer program?

  3. do you receive any error messages?

  The computer has other problems in addition to not be able to run Microsoft FIXITs?

  If the problem is related only to not be able to run FixIt, then you can contact the support team Microsoft FIXIT.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• program of streets & trips Microsoft will not work, keep getting registration error message how do I fix

  Microsoft streets & trips program will not work keep registration error message, how can I solve the problem?

  Hi, Long1950,

  See if that helps

  Error message when you try to use the streets & trips: "your registry settings for this application were not correctly copied.

  http://support.Microsoft.com/kb/314590

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Will not work my Office Gadets, any ideas on how to fix?

  Will not work my Office Gadets, any ideas on how to fix?

  Hello

  I advise to check on the following website: http://support.microsoft.com/kb/2515657
  It contains information on doesn't work does no gimmicks and information about the gadgets are not displayed correctly.
  See also http://windows.microsoft.com/en-PH/windows-vista/Windows-Sidebar-and-gadgets-overview
  This link explains on the gadgets and the sidebar, how to open the sidebar and explains the main features on the gadgets.
  Thank you
  I hope this helps.

• Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  Hi, I bought a the United States iphone6, im now in South Africa and it will not work. It says sim not supported.how do I fix this?

  The SIM card is not support indicates that the iPhone is locked to the American carrier that it has been activated with. In order to obtain the released lock it is necessary that you talk to the carrier to find out what their requirements are to release the lock. They are the only ones who unlock it so that it can be used with another carrier.

• Start Microsoft office 2010 will not work

  MicrosoftOffice 2010 will not work on my g - A6 notebook series

  Hello:

  See if repair works... info on how to do this on the link below.

  http://Office.Microsoft.com/en-us/Starter-Help/Update-repair-or-uninstall-Office-click-to-run-products-HA010382089.aspx

  Paul

• Most of Microsoft Windows Update Services, for example will not work after replacing my hard drive.

  * Original title: Unknown Publisher for most of the Microsoft Services such as the window update

  Recently, my Toshiba hard drive failed on my Satellite L500.  I replaced it with a new 500 GB hard drive.  And then used my Toshiba restore to out of the box, however, as stated in the subject, it shows most of the Microsoft Services do not work.  As suggested in another post, I ran MGADiag and here's what I copied.  What kind of help you can give is appreciated.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - 4F8HK - M4P73-W8DQG
  The Windows Product Key hash: Xs1iQgVeo0C + sObJxS7eu + FuBPQ =
  Windows product ID: 00359-OEM-8992687-00057
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {EC921169-98BC-407F-99C4-04D38DBA4400} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\windows\system32\wat\watweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

  Other data-->
  Office details: {EC921169-98BC-407F-99C4-04D38DBA4400}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-W8DQG00359-OEM-8992687-000572S-1-5-21-3296362386-1532337117-3753913143TOSHIBASatellite L500TOSHIBA2.0020110121000000.000000 + 00090B83607018400FC10090409Time(GMT-05:00) Standard is03TOSCPLTOSCPL00109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800057-02-1033-7600.0000-3142009
  Installation ID: 021330453740668764980431685940600732000434410320980891
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: W8DQG
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 31/05/2014-04:47:52

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  After reading through all the same problems here, I found a post that mentions a WD drive disc that I put in after the failure of my Toshiba HD.   I followed the link that took me to a page of HP but I installed the Intel Rapid Storage Technology driver (IRRT) via the provided download link and hop, from this moment, things seem to be fixed.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02219204&CC=NL&LC=en&DLC=en&product