Microsoft kernel DLS synthesizer driver problem
My PC goes into a loop BSOD where Windows XP logo appears for a second, BSOD, then restarts automatically and loops. The error is IRQL_NOT_LESS_OR_EQUAL. The PC works well on the debug mode. It seems that a driver, the Microsoft kernel DLS synthesizer, has a problem. The State of the device indicates that the driver may be corrupted or missing. Does anyone know how can I fix? I tried to reinstall the driver, update my sound card drivers, pulled the sound card, System restored and tried the last known good configuration. I can't find anything on the internet on this subject.
I solve the problem only installed the system again :(
Tags: Windows
Similar Questions
-
Satellite Pro M70-220: Microsoft Kernel DLS driver reinstall
I'm having a problem with the "Microsoft kernel DLS synthesizer" (on my laptop Satellite Pro M70-220).
that very well, I would appreciate some help to solve.My questions are in * "BOLD" type * at the bottom of this post.
In the device under the "Sound, video controller & games" Manager type of device, I found a yellow exclamation point
mark against "The Microsoft kernel DLS synthesizer".When I right click on the entry for device 'Microsoft Kernel DLS Syntheizer' and select 'Properties', the
more info is given under the general tab:Microsoft kernel DLS synthesizer
Device type: sound, video controller & game
Location: Location 0
Device status: Windows cannot load the driverfor of this hardware device. The driver may be corrupted or
missing (Code 39)
Click Troubleshoot to start the troubleshooter for this device.Before clicking on the resolution of the problems, I checked the info on the "Driver" tab, which is:
Microsoft kernel DLS synthesizer
Driver provider: Microsoft
Driver date: 01/07/2001
Driver version: 5.1.2535.0
Digital signer: Microsoft Windows component PublisherWhen I click on the button "Driver Details" tab driver, the information given is:
Microsoft kernel DLS synthesizer
Driver files:
C:\Windows\System32\drivers\D.music.sys
C:\Windows\System32\drivers\lvusbsta.sys
C:\Windows\System32\drivers\Tvs.sysProvider: Microsoft Corp.
File version: 5.1.2600.5512(xpsp.080413-2018)
Digital signer: Microsoft Windows PublisherOn the 'Détails' tab in the properties box, the given info is:
Microsoft kernel DLS synthesizer
Device ID of Instance
\DMUSIC SW\ {8C07DD50-7A8D-11D2-8F8C-00C04FBF8FEF}* Troubleshooting: *.
When I click on the "store" on the general tab, a page "Toshiba Help & Support" is displayed.
who gives the instructions to uninstall and reinstall the device. Uninstallation instructions are simple:Go to Device Manager > right to uninstall click Device > click Surdesinstaller > in the "withdrawal of the device confirm.
Dialog box, click OK.My concern is with the "relocation of the device" instructions, which are:
Close all programs > start the Add Hardware Wizard > click Next and Windows Search Plug &
Play devices.
If no device Plug & Play are found, a list of devices appears > click on "Add a new hardware device" > click Next > click
"manually install the hardware that I select in a list" > click Next > in the "Common material Type" list
Click the appropriate device category > click Next > in the manufacturers list, click the manufacturer of your
device > in the "Models" list, click the name of the model OR click "have a disk, if you have an update or
the manufacturer provided to install for your device driver > click Next and follow the instructions in the wizard
to complete the installation.* Issues: *.
* 1. What is "Microsoft DLS synthesizer" and what is its role? *
* 2. Is "Microsoft DLS synthesizer" a device of internal device, as opposed to a 'Plug and Play '? *
* 3. With respect to relocation instructions: *.
* - what category of device "Microsoft DLS synthesizer" would be listed under? *
* - in the list of "models", what the "model name" would be for the "synthesizer DLS of Microsoft? ** - for 'Disc' alternative option, where can I get/download a update or provided by the manufacturer *.
* driver for "Microsoft DLS Synthesizer" of? ** - one disc 'a' Wizard allow you to select the folder on the hard disk that contains the *.
* Downloaded (s)? *Note: I'm leaving the principle that the driver is corrupted so I'll have to download and install
the uncorrupted driver.* Please indicate if there are any other installation information that I'm aware of.*
Thank you very much for any assistance anyone who can offer.
AlanCB
Hello
I've never heard of the Microsoft kernel DLS synthesizer and that's why I studied a bit.
I found this MS developer site:
http://msdn.Microsoft.com/en-us/library/aa940369.aspxIt is said:
The component of the Microsoft kernel DLS synthesizer provides the port of DMusic, content class miniport driver in the dmusic.sys fileIt seems that most of the problems with this kernel occur due to lack of SP2.
If you have installed Windows XP you need to update the operating system to the State.
All service packages must be installed! -
Map Microsoft 6to4 has a driver problem Detected Other Solutions Hardware changes may not have been detected Hi M. - Tottimeemoo.
According to the description of the problem, it seems that you are having problems with "Microsoft 6to4 adapt has a driver problems. I will defintiely help you with this question.
-Did you do changes on the computer before this problem?Method 1: I suggest you to see link below and check if it helps.On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error messageMethod 2: I also suggest you to uninstall and reinstall the network card and check if that helps.I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.
-
I just a GalaxyTab 10.1. Connected to the computer and got the following driver problems: "USB MTP device has a driver problem" and "Microsoft Virtual WiFi Miniport has a driver problem. What are the corrections? My automatic updates are up to date. is it a problem to Microsoft or GalaxyTab?
Hi David,
1. have you received any disk software for GalaxyTab 10.1?
Method 1:
You can try to start the Fixit material and check.
Hardware devices do not work or are not detected in Windows
Method 1:
You can try to uninstall and reinstall the device.
a. click the Start button, in the start search box, type devmgmt.msc and press to enter.
b. Select the USB device and right click on it.
c. now, select uninstall.
d. restart the computer.
Alternatively, you can download the drivers for your Samsung device from following link:
http://www.Samsung.com/UK/support/detail/supportPrdDetail.do?menu=FW&prd_mdl_cd=gt-P1000CWAXEU
2. What is the error or message code you get for Virtual WiFi Miniport in Device Manager?
Method 1:
Alternatively, you can try to reinstall the Virtual WiFi Miniport driver and see if it helps.
a. click the Start button, in the start search box, type devmgmt.msc and press to enter.
b. Select the device to Wifi Miniport Adapter, the network adapter and right click on it
c. now, select uninstall.
d. restart the computer.
After the computer restarts, the drivers will be installed automatically.
Method 2:
If you're still having problems, then try updating the chipset and network card drivers.
For more information, you can consult the following articles:
What to do when a device is not installed correctly
Updated a hardware driver that is not working properly
Hope this information is useful.
-
Teredo tunneling adapter error: Code 10
I have a wireless modem in my house. When the phone rings it temporarily blocks access to internet on my laptop. I ran "Troubleshooting" and he said the teredo tunneling adapter microsoft has a driver problem (code 10) and I have to click "Reinstall driver" I did. But it will not re - install. I'm not too irritable. Can help you.
In addition, I don't know if there is a related problem, but my laptop takes a long time to communicate with the printer. The doc will be in Quebec but does not print.
Thank you.
Hi LindaGreenwood,
1. what operating system is installed on the computer?
2. you have made no changes to the computer before the broadcast took place?Generated 10 error code when Device Manager does not have enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104I suggest you uninstall the drivers completely uninstall and then reinstall the drivers from the manufacturers Web site.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly -
Microsoft ISATAP # 15 has a driver problem
Please I think you are laughing at me, I encountered a problem Microsoft Fix it: Microsoft ISATAP # 15 has a driver problem
So I'll try to get and proposed type of meeting: access and pay solve you your problem. Today, I was put through the online system and gently after a certain time the consultant Jan I guided me to access a premium of gentlemen, but you had to pay and he then after paying I would have my my pc with the problem solved.
I just think it's a shame that Microsoft company ffazer with their customers who bought a pc with your system and you have no guarantee or maintenance. My Windows Vista system was paid for with a lot of sacrifice and money as a result of my work. Now with 63 years I have to live with these Microsoft games.
Thank you and good afternoonOriginal title: Microsoft are you kidding me?
Hello j. a. Lopes,.
Since your original post, you say that you have problems with a Microsoft ISATAP # 15 pilot.
Take a look at this thread: http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/microsoft-isatap-adapter/a0c8e409-0016-4a81-bab5-20b639893930
In particular the answer by Diana D. see if she thinks help with the problem.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
Microsoft ISATAP ISATAP #2 and Teredo Tunneling adapters have driver problems. I tried to correct by using Troubeshooter and the Device Manager, but not luck. The computer was upgraded to Windows 7 Ultimate this year. Help, please!
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520 -
error code 39 cannot load the device driver, cannot load microsoft kernel drm adio Descrambler
I have no sound, no audio output device installed is the message on the speaker icon.
Open the Device Manager, I get the error code as indicated in the title. My audio is Realtek ALC888 HD audioDear anyone, I had the same problem. One day, my sound card / audio just stopped. X red on the sound icon. My CD/DVD worked fine but no sound. I uninstalled the sound card, updated drivers... everything I could find... nothing worked. I run only Vista 32 bit with a Realtek AC 97 integrated sound. Looked on the forums and read and I tried for weeks hoping to not have to reformat. Finally, I got in the registry and lucky. Here's what I did: Device Manager: uninstalled all the sound stuff. I kept getting this: Microsoft Kernel DRM Audio Descramber Microsoft Streaming Clock Proxy Microsoft responsible for quality Proxy Microsoft Service Proxy Microsoft Tee/receiver-to-Sink Converter Realteck AC 97 I uninstalled all that sort of thing. Then to regedit and see below Regedit navigate to: HKeyLocalMachine\System\CurrentControlSet\Control\Class {4D36E96C-E325-11CE-BFC1-08002BE10318} ON RITE PANE... I deleted: for FILTERS LOW Dword value (Mine was something that read like LVUSB or some such), I restarted and did not leave Windows Installer automatically... don't leave... it will give you everything _ mentioned above. I reinstalled my sound of a pack of Realtek for Vista. Lo and behold... sound is back. Vista still hate the pilot but did before cuz Vista sucks... but it works like any other so... screw it! I am happy. Hope this works for you. chatilingus
-
Hello world! I try to print, and the message appears saying that Microsoft Teredo Tunneling Adapter has a problem. I tried to re - install the driver and it seemed that everything was going to be a go, but now I have the dreaded message 'red X Failed '. :( I clicked on "that if this failed" and followed to check the connections, updates on, etc., and it's all good. Any help would be greatly appreciated. Thank you very much!
Hello
We are here to help.
To resolve your concern, please download and run Microsoft Fix It for convenience hardware store.
If the Microsoft Fix it fix the problem, try to use the device in Safe Mode and see if the problem persists. If you do not experience the problem with safe Mode, no doubt recent programs you have installed is causing the problem. You can try to disable the programs one by one and check which of them is the cause.
Let us know how it goes.
Kind regards
-
driver problem on teredo tunneling adapter device Microsoft
The message is that a driver problem has been detected on Microsoft device adapter tunnelling teredo, reinstall the driver. to try to reinstall the driver, I get the message "this device cannot start [code 10]."
I have Windows 7 home premium, any suggestion would be appreciated.
You have a "HP"?
If so, this may be of interest: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Microsoft-Teredo-Tunneling-Adapter-Code-10/td-p/4204314
Or see this thread for common solutions: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/troubleshooting-sony-vaio-windows-7-computer/177ed59b-028f-432a-b451-7c52e1ce6b6c
Quote:
The most common resolution is to update the drivers associated with the device. To do this, follow these steps:
a. in the device properties dialog box, click the driver tab.
b. click put to update driver to start the Upgrade Wizard to update the material.
c. follow the instructions to update the driver.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Note: You may be prompted to provide the path of the driver. Windows may have the built-in driver, or the driver files can always be installed since the last time that you have configured the device. If you are prompted for the driver and you don't have it, you can try to download the latest driver on the manufacturer's Web site.
Discussions:
Associated content
-
Microsoft teredo tunneling adapter has a driver problem
Original title - trobleshooting driver
Microsoft teredo tunneling adapter has a driver problem. I got this message when I have my PC troubleshooting
my PC is HP Compaq 615 Windows 7. How can I solve this problem?
Uninstall the adapter Teredo, ISATAP, IPV6 nor Microsoft 6 to 4 cards and by going to control panel > system > Device Manager > view > show hidden devices, and then expand the network adapters entry and do a right click either disable or uninstall one of the adapters I mentioned, and then restart your computer.
You need not Teredo adapter to connect to a domain or a shared drive, and the special features of Microsoft claims to offer with the Teredo adapter do not work in Windows 7 in any case.
-
I notice that I need to solve problems for my computer. The message said: there is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be installed. One of the options is to reinstall the driver. I tried, but it did not. What is this adapter, and how should I do if the error message goes away?
There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.The device informationName: Microsoft Teredo Tunneling adapter ID: ROOT\ * TEREDO\0000 Error code: 10 Reinstall the device driver CompletedThere is a problem with the Microsoft Teredo Tunneling adapter driver. Reinstall the driver may resolve this issue.Problem with the PnP devices DetectedThere are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.It is a known problem if you have Zone alarm installed. If you have installed remove it at least to checkTo disable Teredo tunneling 6to4 interface open an elevated command prompt and type
netsh interface set terredo disabled state.To re - install- Click on start.
- Type Device Manager in the start search box, and then open it.
- Click the Action tab on top and click Add legacy hardware
then click next and next again, he will then scan and find nothing then click on the screen after that.
Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
-
Password Microsoft WPD enchanced storage driver has a driver problem
I found this same issue as someone else on this forum and did the checker system has been told to and it says Protection Windows did not find any breach of integrity.
I don't know why the driver won't install, my windows updates automatically, I am on Windows 7.
What can I do else?
My computer says this: 'password for improved storage Microsoft WPD driver has a driver problem' it can't be fixed. Tried all I know. Even downloaded a driver repair, but he said not all drivers for my ipod have a problem.
I can't use my ipod on iTunes for this reason. It does not detect it. I didn't add or change programs before this happened, but since I uninstalled iTunes and then reinstalled and uninstalled again. From now I have no access to my account.
Any other ideas how to solve this problem?
Thanks, Dani
Oh we can also read "this device cannot start (Code 10)"
Hi Dani,
The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
Perform the steps from the link below and see if it helps.
Good day!
Answer please if you face concerns.
-
Hey...
I have a laptop HP 14 R217TU running Windows 7 64 bit...
A device driver is not working properly... It's "Intel engine reliable performance of interface"...
(attach a photo)
I tried the driver that came with the laptop... Also tried the driver I downloaded from HP's official website... Also on site intels... None of the hems worked (I tried win7 64-bit drivers, so no error it)... But it worked very well with the drivers that came with the laptop when used Windows 8.1 64 bit...
Where and how can I find a good condition of market Driver for windows 7 64 bit which allows to solve this problem?
PLEASE HELP ME...
Thank you...
Thanks for your quick response...
I've already managed to solve following another topic on this forum (link: http://h30434.www3.hp.com/t5/Notebook-Hardware/Intel-R-Execution-Engine-Interface-driver-for-windows-7/m-p/4916821/highlight/true#M166862)... I just installed Microsoft Kernel-
Mode Driver Framework (KMDF) version 1.11 updated for Windows 7 as a result of their training and the problem disappeared...
BT thanks a lot for the support you have provided. I'll try it without a doubt later...
THANK YOU AGAIN... -
Hi all
I use a HP Pavilion dv6103nr Entertainment Notebook (Window XP). Audio device was working before, but a few months ago the audio started does not (no sound cannot be played).
When I go into control panel--> sound and devices Audio---> it is said that no. AUDIO DEVICE
Then I go to control panel to control---> system---> hardware---> device---> sound, video management and game controllers---> I found a yellow question mark beside: MICROSOFT KERNEL annuleur of ACOUSTIC ECHO and another question mark yellow right next to: MICROSOFT KERNEL WAVE AUDIO MIXER.
I then right click on each of these drivers and tried to update the two drivers (I've tried insert the recovery disk (it is the only drive that I got when I bought this laptop) and also I tried to install the software automatically, but these two options did not work.)
Please tell what should I do now? Already, I went to the HP site and looked for these two materials for a update but had no luck...
PLEASE HELP ME OUT HERE! I'M REALLY No.$ to BUY a NEW computer LAPTOP, BUT I NEED to USE AUDIO if BADLY... pls help = *) appreciate very much for all your help here!
To troubleshoot sound problems
AutoScan for lack of device drivers.
http://h20614.www2.HP.com/ediags/GMD/welcome.aspx?LC=en&cc=us&product=3382292
(2) drivers audio
Good luck.
Maybe you are looking for
-
Caching Service broken for Macs?
I ran on an issue that has published some time ago and is still a problem. It seems that the cache server does not work for any Mac that I get when they request for updates to the shop of MacApp. It didn't matter if the update is a system update or
-
is - this legitimate iphone 6? help guys pls)
can someone help me if this iphone6 is legitimate to apple? the color of the box isn't even as my friend. Please look at the picture if its same with your iphone box, im just curios with this iphone box with its android "move" data, it's my 2nd iphon
-
Cannot use the XAVC clips in AVID
Hi guys,. last week, we had a few images with our new F5. We recorded in the XAVC format both in IMX50. Wanting to scan on our AVID MC6.5 it the clips IMX50 did well, but the XAVC clips were not recognized, even if it has been installed the new plugi
-
Satellite A100-062 - USB mouse does not work
Hello I have a Satellite A100-062. I've never been able to get a USB mouse to work with her.The OS is Vista Home Premium, whenever I have plug in a USB mouse, the operating system detects a device has been connected to the USB port, but eventually th
-
Screen fade slowly when changing from one page to the other
Original title: melted screen Why my not to screen a slow fade when changing from one page to another. Did not until recently.