Microsoft Lifecam VX-1000: sound and picture out of sync.

Similar Questions

• Microsoft lifecam vx-1000 gives windows crash after like 15 minutes of use

  I have a problem with my webcam (microsoft lifecam vx-1000). every time I use it more like 10-15 minutes, I get a blue screen, windows crashes and my laptop turns off. However, I can use my built-in cam as long as I want without problem. Could you please give me that a solution on the way could make my lifecam don't crash my laptop? Thank you very much!

  http://www.Microsoft.com/hardware/download/download.aspx?category=ice

  Download/save the drivers/software for this the above link > save to the desktop > right-click on > run as Admin > install.

  See you soon.

  Mick Murphy - Microsoft partner

• Adobe first Pro CC 2015 Audio and video out-of-sync after the upgrade of the 2014 cc

  Hello everyone

  Once the upgrade to first Pro CC 2015 I get all of my video projects that are locked with a yellow box (Adobe Player) that says "Audio and video out-of-sync clock to xx:xx:xx.xxx ', and all my footage has the same problem

  No reason? HE WORKED IN CC 2014 PEARLS!

  any help is very appreciated.

  OK, since I'm short on time and my boss's eye laser pierces my skull, I had to ROLL BACK TO CC 2014.2 G * T!

  Fortunately, there is a way MORE HERE: how access, restore or update any Version of Adobe CC apps | ProDesignTools

  don't forget to install the updates after: all updates of Adobe CC 2014: Direct Download links for Windows | ProDesignTools

  Lesson of the day: If you have a big project on creation, and you are tempted to update CC 2015 for THE MOTHER OF GOD NOT WHERE, AND GET THAT HAND OF THE MOUSE NOW! It will mess up your project and throw the errors that you never had in CC 2014.2

  Good luck!

• Re: Satellite P300 - 1 9 - no sound and picture with HDMI

  I have a new laptop Satellite P300 - 1 9.

  Last night I plugged the laptop to the TV and was able to watch a movie, but no sound was sent to television. Tonight, I haven't tried the same thing but this time, no sound or picture from an HDMI cable.
  TV and controlled cable works fine on other equipment.

  Any advice on how to fix this (I'm not a computer expert so please keep advice as simple as possible).

  Have you installed the HDMI Control Manager or a new version of it?
  In addition, I would like to make a BIOS update.

  The two update you will find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  Good luck!

• I want to install webcam by Microsoft LifeCam (version 3.0) and need an account address or help info to video chat with someone who Skypes

  I have a LifeCam 3.0 install and have an address MSNLive. I want to video chat with someone who has Skype address and want to know how to do this in my computer with the software and the webcam I have.

  Hello

  • What Version of Windows are you using?

  You can check these links:

  Using Skype with your Lifecam

  http://support.Microsoft.com/kb/2262196

• Video and Audio out of sync after rendering with SOUL

  I went videos of gameplay, with a fable for my microphone and one for the PC-ingamesound. After I visited with Premiere Pro 2015.4 all right.

  But with Media Encoder 2015.4 gameplay video is about 15 frames before the sound. I have an intro to 4 seconds, it is in sync, so I don't understand why the matter of gameplay GET is out of sync.

  When you need more information to help me, let me know.

  Hi Gunther, sorry you have problems with the SOUL.  Looks like the sync is correct when exporting directly from the first, is that correct?  Also, what format you export to SOUL & first?  The problem of synchronization occur even if you export to a different format of the SOUL?  You can try to revive the SOUL with the SHIFT key to reset your preferences, just to verify that the problem is not related to corrupt settings.

  If you agree with the sending of your first sequence and media I could study the problem more away from my hand, let me know and I'll send you a link.

• audio and video out of sync in first pro cc 2015, player QT video on a mac mini

  So, I use Adobe Premiere pro cc 2015 to change a screen capture video recorded with quicktime player. I'm on a mac mini with OS X el capitan, and it was my first time using first (so I probably just doing something wrong because I do not know the program, but anyway, I imported the video into the first, (it's a .mov file format) and the video and audio are out of sync) so I thought ok, I can simply detach the audio, move it above, the re - attach it, right? so I found a part of the video that has been easy to match the audio and video, and I lined up. Everything was perfect until I went to other parts of the video and realized that they were always out of sync. Apparently, the video is at a different speed or format or something as the audio, and even if I have lined up on the one hand, the other parts are always out of step. I looked at how to fix, I messed with the project settings, then tried to change a .mov to a mp4 (because a mp4 file that I already have on the computer was functioning very well in first) and finally, as a last effort, I downloaded version 2014 so and NEITHER VERSION WORK they both the same number.

  If someone can please help me I WILL BE so HAPPY and thanks a lot in advance

  I am really sad because I'm upgrading to use iMovie (ugh) and I was so excited for the first time and now it is messed up, and I'm really disappointed.

  If it makes a difference, the microphone that I use is a blue snowball ice I bought a week ago (WEEK AGO) haha

  None of the parameters of creation, or QT player or something that might help is very much appreciated.

  Thank you, Owen

  Thank you very much!! I finally found out with the help of the family, but I thank very you much for help!

• Audio and video out of Sync

  I capture images from video game using ShadowPlay recording at 60 fps mp4 files. When I import into first and play in the sequence, the audio and video are out of sync. When I play in VLC or Windows Media Player, the timing is perfect.

  Why first plays the audio and video synchronized?

  The corrections that I found online that does not solve the problem are:

  -Make the video in the work area bar (it actually makes it worse for some reason any)

  -Edit video in .mov file extension

  -I know how to use Handbrake to make the files before import has also been suggested, but I don't want to have this extra step added to my workflow, it should not be necessary.

  Any help on this would be greatly appreciated.

  Tempest tim wrote:

  Also, is there no other way to get around the problem of variable frame rate?

  Not if you use the GPU hardware to capture your h.264 videos, there isn't.  First can not correctly handle variable frame rate images.  And the images only you're going to get your encoder is VFR.

  You have 3 basic choices:

  (1) stop using ShadowPlay and use something else which will tax your system more to capture video in a constant frame rate format.  There are other applications that capture images CFR, generally in AVI format, and the resulting files are massive.  You will have a drop in performance in the game when you use these applications.

  (2) transcode w/parking brake to the CFR

  (3) use a different NLE.  Sony Vegas, from what I hear, will support VFR without problems.  Most other NLEs will not, including Premiere Pro.

• Video quality has dropped and Audio Out of sync (EPA 12)

  Edited a video of 30 minutes and took a few clips of him. After the project and saving it, I noticed a severe drop in video quality and despite to realign the tracks audio/video, audio installs always out of sync. Original video clip plays fine and I would just download those, but there are too many dead zones and some splicing that needs to be addressed. At first I cut sections of video caused the problem, but the video before editing it produced out of sync titles as well. on a 30 minute video, audio Animes before nearly 10 seconds.

  EPA 12 Windows 8.1.

  Video camera: Replay 720XD (manual specifies EPA or Quicktime [Pro] Edition)

  Video information by gspot: 29.412 FPS; Resolution 1280 x 720; Audio codec: MP4a:Mpeg - 4 AAC LC video: avc1 H.264/MPEG-4 AVC

  QuickTime is also updated.

  I was see several other discussions on this topic with different answers, which makes me think that every problem is something different. Also, there are not too many threads with solutions. Also concerned by the fact that this problem seems to go as far as 10 EPA.

  BadWolfRacing

  I see no mention of rate constant or variable in the documents of the camera (only 30/60 NTSC or PAL 25/50).

  The only clue that I don't have that cadence is variable, it is as 29.412 frames per second that you give to your video.

  I had advanced for the camera users section and can't find anything that goes with this question. If your camera records with a constant speed then you will see 29.97 or 30 and not 29.412.

  We support the idea of constant compared to variable rate for your video by running the video via the properties of MediaInfo program playback. If your video has a variable rate, reading on will give a minimum, 'general' and maximum playback for cadence.

  http://sourceforge.NET/projects/MediaInfo/

  Just be careful for carryons unwanted in the download of this program.

  You seem to have 1280 x 720 @ 29,412 progressive frames per second (variable frequency), presenting as AVCHD.mov. And apparently you transfer the recording to the camera as the video compression AVCHD (MPEG4 AVC/H.264).mov, not a "MPEG" such as MPEG2 video compression...

  Variable rate in first Elements = always no problem. I have the iPod video and iPhone 5 (with variable rate) and any import problems (audio out of sync or other), edition, exported from Premiere Elements set the correct project presets and work with content timeline made. There are some who have problems. For them, the answer is borrow the video in software to change the variable in a constant rate.

  Whether you use the original or the original converted to the hand brake

  The project preset

  NTSC

  AVCHD

  AVCHD LITE 720p30

  Export of QuickTime H.264.mov (720 p 30)

  Publish + share

  Computer

  QuickTIme

  with Presets = NTSC DV 16:9

  and, under the Advanced button/video settings tab, make sure that settings are as shown in the screenshot

  

  The transmission speed is cut in the screenshot. Leave it disabled for now. We can talk about Bitrate and file size later.

  Export for AVCHD AVCHD.mp4 (720 p 30)

  

  Please read the above and let us know if any information improved the situation.

  Any questions or need clarification, please ask.

  Thank you.

  RTA

  Add on... Just in the notes on the case... the publication + share/computer has more choices than Adobe Flash Video, MPEG and AVCHD. The need for rest to scroll to with the tiny scroll right bar. Or, you can click on Adobe Flash Video, so that the Panel will turn blue. Then use the down arrow key to move to the bottom of the list or the up arrow to move to the top of the list.

• Imported audio file related and video out of sync

  I have video and audio in Mixcraft, export it to an .avi file, and then import it into APE8.  For some reason any video and audio is out of sync way every time.  Any suggestions?  Thank you for always!

  For sustainable development projects, MS AVI with CODEC DV/DVC is the right to choose. There are very, very little to gain with the AVI uncompressed, except much larger files.

  Good luck

  Hunt

• Visuals and Audio Out of sync

  Hello

  We try to change some sequences HD, in which case the audio and video are out of sync.

  Plays ok as a MPEG4 file on the hard disk of the computer - problem only occurs when images are imported in the first Pro CS4.  We import via the media browser.

  The problem worsens as he plays for example at the end of a 49 minutes 9 seconds audio offset.

  I read this thread, but it didn't really explain what is the cause...

  http://forums.Adobe.com/thread/436751?TSTART=30

  Here are the specifications of the sequence...

  Path: C:\Users\Administrator\My Videos\Coast10_videomaster\Nora 2 day day 1 Vp1
  Type: MPEG Movie
  File size: 10.8 GB
  Image size: 1440 x 1080
  Sampling: 32
  Frame rate: 25.00
  Audio Format: 48000 Hz - compressed - stereo
  Project Audio Format: 48000 Hz - 32 bit floating point - stereo
  Total time: 00:59:01:08
  Average: 3.1 MB/second
  Format of the pixels: 1.3333

  One wonders about the Audio Source being Format and Format Audio different project for example compressed / comma floating 32 bits?

  Someone suggested to syncronise?  but from what I can tell, it is only useful for multiple clips?

  One of the local film tutors suggests that this is a problem with not having hdv cameras is not a video sync - time and it was the fault of cameras. Apparently the only way to move which was to capture in short clips instead of a jackpot.  Used camera is a Sony V1P.

  Comments are welcome... would be very appreciated!

  Use HDVSplit to capture HDV equipment. It of free, has the scene detection, and avoids the OOS errors.

• Problem with the Microsoft Lifecam VX-1000

  I have problems with the video quality of the webcam, it is very slow with the delayed and blurry motion. The problem seems to be that on the window of parameters of that bandwidth usb is at least (1) and will not be changed.

  I managed to operate only once by trial and error and plug the cam into a different usb port and the cam worked correctly with a fast refresh picture, also the usb bandwidth went up to 6.

  I downloaded the latest version of the software for this cam but the problem persists, it seems very unstable and crashes easily. I use vista family premium fully updated and all the rest works fine.

  Someone at - it ideas of what could be the cause?

  Thank you

  Hello

  Thanks for your reply, I found that the USB bandwidth seems to be limited on the 1 port, which is part of a panel of memory on my pc card reader. I now use one of the USB ports on the main case for the cam and the bandwidth is only showing 6 and giving a normal pace.

  Also changed the ring on cam for a sharper image.

  I use the latest version of the CAM software and video card drivers.

  After watching in msconfig I found that she was set to selective startup, which i have now changed start normal, although this does not seem to have changed anything, everything works ok as before.

  Thanks for your help.

  Kind regards

  Andywuk

• When I play a DVD on Windows media player 11, which is to have no noise, just a photo but whose sound and picture during video cd playback, please help me.

  I am on window XP SP-2
  Media Player 11
  resenty update of Windows media player 11
  previously using ELECARD MPEG-2 codec
  already unintalled and reinstalled correctly
  also install realtek AC 97 driver currently

  Please install the latest codec:

  http://www.filehippo.com/download_klite_codec_pack/ MOEEN AJAZ KHAN MD - MCP/N + / A +.

• PM3000a: Serial Read and Write out of sync

  Hello

  I'm reading the values of the PM3000a during the series. I use LabView 2009 32 bit and VISA 5.2.

  I used the LabView driver and programs downloaded from here and have reworked to get my current VI.

  Mainly in my program, I am looping through some series of an array of strings controls and burning one at a time to the PM3000a during the series and then read and store the query results in a digital picture.

  For some reason, sometimes values blend. I have attached my VI and a screenshot.

  The results that I expect are:

  (Power application): FND:CH1:WAT? = ~ 300

  (Application of voltage): FND:CH1:VLT? = ~ 230

  But the actual results I get:

  (Power application): FND:CH1:WAT? = ~ 230

  (Application of voltage): FND:CH1:VLT? = ~ 300

  Thanks in advance

  In somne point you miss read data, so it will stay in the buffer and will be read instead of the most recent data.

  Add a ' VISA RAS I/O buffer "before sending a request should help.

  And try to find out why there is some left in the buffer data data sometimes can be send because of the interaction of the user on the intrument Panel (print button etc.))

  The response of an instrument generally includes the unit, using "Analysis of the chain", you can add a control.

  During the validation of the screws, you must include the Subvi

  For assistance with additional string testing also store strings in an indicator of the chain, make all default values, save the vi and that post.

• Camileo S10 - HD (1080) video and Audio Out of sync

  HI -.

  I'm new here so please, be gentle.

  Curious to know if anyone knows a similar problem for me. I am very happy in general with the quality of the images, photographs and tapes, however, I'm having a major problem. Videos taken with the HD 1080 p resolution are horribly synchronized with the audio (and I mean horribly - about 3-4 seconds to sync) when played on PC.

  It is very good when seen and listened to on the camera LCD screen, but as soon as I watch on PC the sound is ahead of the video.
  Have you tried several methods of game back - that is to say, quicktime, realplayer, Arcsoft and VLC.
  It is of course all the other resolutions, but the entire reason for this was the promise of HD 1080 p.

  I'm doing something wrong?
  Have scoured this site to search and the user manual to see if there are a few essential settings I have missed, but to get anything done.

  Ideas or answers would be much appreciated.

  Hello

  I had the same problem with a film that I created in full HD.
  The problem was that the software didn't supports full HD video audio codec.
  I put the audio in stereo in my reading software (I use the plugin Nero).

  This helped.
  I m not sure if this will also help you but it s worth a try to change some audio settings.
  Also I recommend that you install the codec.

  I use the K-Lite Mega Codec pack
  It contains all the possible and important codecs.