Microsoft OLE DB provider for ODBC Drivers error '80040e14"error using DW authentication level

Similar Questions

• in Microsoft OLE DB provider for ODBC drivers

  Hi all

  I was having trouble with my code. The following error occurred when trying to update a record in the table 'ETA' of my 'metroqual' database and table.

  The failure of the conversion of the date and/or time from a string. in NI_Database_API.lvlib

  

  It's the first time I get this and the code worked for several months! I m very confused because the same operation do not generate this error when I try with another table.

  In the table 'ETA', I have 45 parameters and date data are the 6 th. I use a time stamp ' unused time and date format system "properties-control.

  Someone knows how to fix this? I tried many ways, but it still does not work. I can do everything, but I can't update the datas.

  Thanks adavance!

  Thank you mikeporter,

  I already solved the problem.

  There was an error in my code. The value sent to the database was a 'number' in the code, but I wrote this must be a 'date', that's why the query command generated an error because the declaration included a number instead of a date.

  

• ODBC 80004005 error on server

  When I run my site on my local server without problem, when we run a www.comeseeitaly.com (choose any Language) looks like this.
  
  Microsoft OLE DB provider for ODBC error '80004005' drivers
  
  [Microsoft] [ODBC driver manager] Data source name not found and no driver by default specified
  
  Home.asp, line 15
  
  Line 15 is "Menu.ActiveConnection = MM_access_adventure_STRING".
  calling my login page "access_adventure.asp", which has the following
  
  < %
  ""FileName ="Connection_odbc_conn_dsn.htm".
  "Type ="ADO. "
  "DesigntimeType ="ADO"
  "HTTP ="false"
  "Catalogue =" "
  "Schema =" "
  Dim MM_access_adventure_STRING
  MM_access_adventure_STRING = "dsn = access_adventure;"
  % >
  
  
  I called Godaddy about 5 times and all guys can say it's "script error" and small robots. I asked them why they think about it and they say look he points to line 15 in the error code... Everything I found on the web about this error normally points to errors for authorization on the users computer user. As I said before, it works fine on my local server.
  any help would be great.

  Thanks Nancy, I created the dsn and I said support staff throughout that the problem is with the dsn. They just repeat as drones... script error script error... I tell them that line 15 is just call the dsn and receives no response... their response...... script error in any case I just went and created a dsn less connection and the site is in place. Thank you for your help.

• I'm trying to access a wireless network with the password provided for me. I get the following error message

  I'm trying to access a wireless network with the password provided for me. I get the following error message: "the network password needs to be 40bits or 104bits depending on your network configuration. This can be entered as 5 or 13 characters ascii or hexadecimal 10 or 26. "what does this error message mean and how do I address so that I can access the wireless network?

  I use XP Professional with service pack 3. I get this error message every other time I try to log in to a protected wireless network security. I used to not get this message; but, now, it may be impossible, sometimes to call all wireless providers when I might only need for a short period or after hours service opening.

  In addition, it is my computer that requires the network password to be different, not the provider of wireless. A password is given to me who works for other users, but my computer won't let me use it.

  Hello

  I suggest you to visit these links and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/the-network-password-needs-to-be-40-bits-or-104/f3fdc3ee-CB40-4107-A632-082093dcdcb8

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/need-to-connect-to-home-wireless-network-Windows/5bf37a22-cc42-4a0f-9d15-83e780f00123

  It will be useful.

• All of my Microsoft ODBC drivers are missing from the Data Source (ODBC) tool.

  I'm not able to see all the Microsoft's ODBC drivers in the ODBC tool.  I checked the registry and it seems that they are correctly configured in the registry, and the DLL exists and is in the right place.  I reinstalled Office 2007 and then tried to use Office 2010 Beta, just in case there was a problem with 2007.  I have no other drivers (IE SQL Server), but none of the pilots Office (and I need the Excel driver).

  Any ideas?

  Thank you
  ARIN Lipman

  Hi ken,.

  The question you have posted is related to Office and would be better suited to the Community Discussion of Office Applications. Please visit the link below to find a community that will provide the support you want.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ODC set up the DB connection - error - Oracle OLE DB provider

  Hi all
  
  I have windows 7-64 bits of the system on which I am configuring ODC 10.1.3.5.1. I am trying to connect to the server of DB Oracle 11 g 64 bit installed on another machine on a network.
  Suite of software, I installed on my system
  -Oracle DB client 64-bit 11g
  -L'ODC 10.1.3.5.1
  -ODAC 64 bit for 11g
  
  
  First time when you start the ODC, he asks for the DB configuration. Here I try to configure DB using "Oralcle provider for OLE DB" connection.
  This time it gives me below error.
  Provider is no longer available. Ensure that the provider is installed correctly.
  
  I tired installing 32-bit ODAC also, but the error persists.
  
  Kind regards
  Vikrant Korde.

  Hey Vikrant,

  ODC (Capture of Document Oracle) is 32-bit application and to make it work correctly, install the 32-bit oracle client and 32-ODAC. Once this installation is correct, we are able to successfully run the ODC.

  Thank you and best regards,
  Snehal

• I have a problem whit security for Microsoft Works 8 (KB977304), appear always 646 error Code? Help, please!

  I have a problem whit security for Microsoft Works 8 (KB977304), appear always 646 error Code? Help, please!

  Hello
  
  1. what operating system do you use?
  2 are you able to install all other updates on your computer?
  Try to download and install the update from the link below and check for the issue.
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=807426a1-8b78-4681-A606-dc39f4d7b64a
  For more information visit http://support.microsoft.com/kb/977304
  I hope this helps.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• A security update for Microsoft Office 2003 (KB2598361) cannot install with error Code: 0 x 80070643

  A security update for Microsoft Office 2003 (KB2598361) cannot install with error Code: 0 x 80070643.

  He did this repeatedly over and over again all week.

  How can I fix it?

  Hello

  Method 1: download and install the update manually and see if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30294

  Method 2: Perform the steps from the link below and see if it solves the problem.

  You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services

  Hope this information helps.

• Error: "Windows cannot verify the digital signature for the drivers required for this device (Code 52)"

  Original title: Wireless cannot verify the digital signature for the card driver from son - after an automatic update of the software.

  We downloaded an automatic update of our HP Pavilion laptop running Windows 7.  This disabled somehow the wireless network adapter.  Readings of the error; "Windows cannot verify the digital signature for the drivers required for this device.  A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that might be malicious from an unknown source. (Code 52) ».  We tried 2 system restore - problem persisted.

  I solved this problem to roll back the driver to that before the driver that is currently installed.  The wireless activated immediately when done.

• Whith USB Device error: "Windows cannot verify the digital signature for the drivers required for this device...". (Code 52) »

  Original title: open usb drivers problem

  My Dell laptop stops working with USB storage drivers. The removable driver icon is displayed in the devices window and printers with a yellow triangle around!
  I've tried different USB drivers and the problem persists. I tried troubleshooting, and it does not help.
  In the Properties window, I get the following message:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  I don't remember making any hardware/software changes and do not know how to solve the problem.

  You are welcome.

  Something seems not quite right so contact the store can be a good idea.

  Back to the initial problem as I understand it, is that when you insert an external drive, you get the error 'code 52?

• The laptop recovery Toshiba Satellite L505-S5997 problem error: Windows cannot verify the digital signature for the drivers required for this device

  I have a Toshiba Satellite L505-S5997 computer laptop and my hardrive recently crushed, impossible to restart.  I installed a SEAGATE 500 GB/sata/GO 16 MB of Cache, 7200 RPM hard drive. I ordered recovery for the computer disks and many of the drivers will not update or install without error that tells me that "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) "error.  Also, when I try to update Windows 7 I get the ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "When I try to download the service pack from the Web site it is usually interrupted with another error.  I tried to go to the Toshiba website and download the drivers needed and utitilities but nothing seems to work.  I am at a loss to try to seek and find a solution.

  Are you sure that the original problem was caused by a failure of the HD, did you test that the hd with the utility bootable disk from audit?

  As if you reinstalled to a new HD using that the required all defined recovery Tosh disk drivers would have been installed in this process.

  Assuming that Tosh then rebooted successfully after recovery, windows update would have run some important updates automatically. If that failed then it would seem that something is happening with your system.

• Transparent Oracle Gateway for ODBC error on SELECT Sybase Anywhere 11

  Environment:
  ------------------
  O / s: CentOS 6.2 (64-bit)
  Oracle DB: Oracle XE 11.2.0.2.0 (64-bit)
  Sybase DB: Sybase Anywhere 11 (64-bit)
  Driver ODBC: unixODBC 2.3.1 (64-bit)
  ODBC drivers: Sybase Anywhere Client ODBC (64-bit)
  Oracle ODBC Gateway: 11.2.0.1.0 (64-bit)
  NOTE: The two databases are local.
  Changing init.ora in listener.ora gateway home directory and put to update the (and use) and tnsnames.ora Oracle XE directory.
  Listener and tnsping started / worked successfully.
  -----------------------------------------------------------
  
  Question:
  ----------
  
  Get the following error message when you try to SELECT a Sybase Anywhere 11 database via the ODBC Oracle Gateway running with Oracle XE:
  
  SQL > select * from employees@SybASA;
  Select * from employees@SybASA;
  *
  ERROR on line 1:
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  [
  
  SQL >
  
  Trace enabled in bridge init.ora file (initSybASA.ora) and got the following at the end of the trace file:
  
  hgocont, 2752 line: call SqlDriverConnect obtained sqlstate 0
  Out of hgocont, rc = 28500 to 2012-08-05-08: 44:56 with the ptr LEADER: hgocont.c LINE 2772 FUNCTION error: hgocont() ID: something else that permission is not valid
  Out of hgocont, rc = 28500 to 2012-08-05-08: 44:56 with the ptr LEADER: hgocont.c LINE 781 ID:Calling FUNCTION error: hgolgon() hgocont
  Entry hgoexit to 2012-08-05-08: 44:56
  Release of hgoexit, rc = 0
  
  ---------------------------------------
  Any advice would be appreciated. THX.

  Hello
  Could you add the following to theinit .ora leading bridge -

  HS_LANGUAGE = AMERICAN_AMERICA. WE8ISO8859P1
  HS_NLS_NCHAR = UCS2

  and try a select a new SQLPLUS session.
  If you still have problems then post the following files-

  -Gateway listener.ora
  -Gateway initSybASA.ora

  Kind regards
  Mike

• Trouble ODBC drivers for access to the

  I've set up CF8 on a Win 2003 x 64 bit computer. CF8 works well using the. He won't find a 10.0.1 Sybase odbc driver installed on the system. Can it be bypassed by installing the JDBC Sybase 10 driver? If so, how do you install the JDBC driver? Sybase comes with a file called JdbcOdbc.dll
  
  

  I found a solution to this problem. It is possible to install the 32-bit on a secure server Win 2003 64-bit ODBC drivers. You install the ODBC driver then manage with odbcad32.exe that launches a 32-bit ODBC Manager. It is found in c:\windows\sysWOW64\odbcad32.exe to set the source of data and CF8 will find an interact with him normally.

• Name of the invalid OLE DB provider specified

  PC with windows XP.

  The user is trying to connect to a database program.  When he enters his user name and password on the database, it gets the following error:

  Connection error

  Audit of security do not.  Unable to connect to the database!

  Error:

  Name of the invalid specified OLE DB provider.

  Other users can connect to the network and conect to the database.  This same user can connect to the database if another user is connected to the network.

  All users have the same rights.

  I tried deletion and recreation but it still errors.

  Any suggestions?

  Hello

  1. is your computer connected to a domain?

  2 of database are. what program you referring?

  I suggest you to send your query to the MSDN forums for assistance.

  Here is the link: http://social.msdn.microsoft.com/forums/en-us/categories

  Hope this information is useful.

• What is this error telling me? Activation context generation failed for "assemblyIdentity1." Error in manifest or policy file "assemblyIdentity2" on the assemblyIdentity3 line.

  Error: (19/10/2012 02:23:06) (Source: SideBySide) (user :)
  Description: Activation context generation failed for "assemblyIdentity1." Error in manifest or policy file "assemblyIdentity2" on the assemblyIdentity3 line.
  The value ' * ' attribute 'language' in the "assemblyIdentity" element is invalid.

  Error: (19/10/2012 02:19:20) (Source: SideBySide) (user :)
  Description: Activation context generation failed for "C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest1." Political or obvious error in the file 'C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest2' on the C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest3 line.
  A component version required by the application conflicts with another version of the component already active.
  Contradictory elements are:
  Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest.
  Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2.manifest.

  Error: (18/10/2012 01:39:02) (Source: SideBySide) (user :)
  Description: Activation context generation failed for "assemblyIdentity1." Error in manifest or policy file "assemblyIdentity2" on the assemblyIdentity3 line.
  The value ' * ' attribute 'language' in the "assemblyIdentity" element is invalid.

  Error: (18/10/2012 01:33:59) (Source: SideBySide) (user :)
  Description: Activation context generation failed for "C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest1." Political or obvious error in the file 'C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest2' on the C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest3 line.
  A component version required by the application conflicts with another version of the component already active.
  Contradictory elements are:
  Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest.
  Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2.manifest.

  Hello
  
  Thanks for posting your question in the Microsoft Community!
  
  If I understand correctly you found the error in the event viewer.
  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.
  I would like to ask you a question in order to better understand the issue.
  You did changes to the computer before the show? All newly installed programs?
  An application manifest is an XML file that describes and identifies the shared and private-by-side assemblies that an application should bind to running. These must be the same assembly versions that were used to test the application. Application manifests may also describe the metadata of the files that are private to the application.
  The error seems to be related to the drivers of amd.
  We will visit the amd support link and install the compatible drivers for amd programs and check if this solves the problem.
  http://support.AMD.com/us/gpudownload/pages/index.aspx
  We also execute (SFC scan) System File Checker. The tool File Checker system to determine if the problem you are experiencing is caused by one or more system files that are used by Windows, the System File Checker utility analyzes the system files and replaces incorrect versions of system files by using the correct versions.
  Refer to this article.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  
  Hope the helps of the information provided.

  Let us know results also, feel free to post us if you face because of Windows in the future. We would be happy to help you!