Microsoft support website does not recognize my VISTA product ID.

Similar Questions

• Pavilion g5450frm: HP support website does not recognize my product

  Hello

  I want to update my BIOS and for this I have to write my product name but the site didn't recognize, and I got a message saying they were unable to determine my specific product.

  Help someone?

  Hello:

  It is the page that appears when I enter the product number.

  It is not a laptop (which is the section of the forum you posted).

  http://support.HP.com/us-en/product/HP-Pavilion-G5400-desktop-PC-series/5080749/drivers

  If you have a 5450 en, I don't see that either, so choose the 5450sc.

  You should be able to tell from the sheet material if it's the same thing or not. It should be.

  It has the same motherboard that yours is...

  http://support.HP.com/us-en/document/c02898096

• Website does not recognize as a product nam4e valid G700

  I run Windows on a laptop G700 8.1. Whenever I check the support site for help, told "G700" isn't a number of lqabel to vqalid. I realize that the G700 is a relatively old machine, but why I can't find support in his favor?

  Hi CRBlair,

  Welcome to the community,

  I had no problem to find drivers and manuals for the G700 on the support site.

  

• Bluetooth support service does not start on VISTA

  When I go into the Services Panel it shows of Support Bluetooth Service is set to automatic but not started. When I try to start this service, it gives me error: 1053 indicating that the service has failed within a reasonable time. I have a MX5500 Revolution keyboard and mouse combo that works very well. But when I try to put the mini hub so he could accept the other BT devices, it hangs, freezes or crashes. I tried to uninstall and reinstall the software several times with no luck. I know that the reason that this happens, it's the BT support service does not start. Any help is appreciated.

  Hello

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
  When you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREEhttp://www.nirsoft.net/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP support site does not recognize my computer.

  I bought a HP Pavilion model p6347c at Costco which is now out of warranty. I am told that I need to update the chipset drivers, because the computer does not recognize my SD card reader. However, every time I try to access the support site and type in my template information, I get a message that it cannot find any reference to this model.

  My computer is a HP Pavilion model p6347c, Nr AY614AA-ABA. Operating system is Microsoft Windows 7 Premium family. Why HP claims that he knows nothing about the PC?

  Hello:

  Here is the link to the support page and drivers for your PC.

  http://h10025.www1.HP.com/ewfrf/WC/product?product=4120616&CC=US&DLC=en&LC=en&Query=AY614AA&Tool=

  Paul

• Microsoft support family does not - I can't ask a Web site adding the admin

  I set up a computer to a separate user and allow only Web sites that I approved.

  Recently the user tried to go to a Web site that is not on the approved list. They tried by e-mail a request to add the URL to the approved list, BUT when they click on your email request, the window do not appear which allows them to complete the application.

  I tried to manually add the site, but it still does not work.

  I found that adding through an application works better, but for some strange reason, it no longer works.

  Please advise on a solution

  Thank you

  This problem is persistent in recent weeks and hit in all Windows 7 users who I have spoken, but Microsoft still apparently does not respond when asked if they checked things on their end.

  In the meantime, I think I have a solution to your problem with the addition of the site manually.  I assume that you will on the Security Web site for the family, go to the green list and manually add it?  The filter is automatically updated after doing this. Go to the start menu and search for "parental controls." Open the program that simply says "Windows Live Family Safety" and look in the upper right corner for a refresh button. That should force the settings that you changed on the site is taken into account.

• XP does not recognize CD Vista

  A picture made using Windows Vista CD does not work on my other computer that uses XP Home. The message says that the CD is empty.

  Usually this would occur if the CD or DVD is not "to the point" by the computer that burned the disc.

  'Close or finalize a CD or DVD.
  < >http://Windows.Microsoft.com/en-us/Windows-Vista/close-or-finalize-a-CD-or-DVD >

  HTH,
  JW

• LaserJet Pro 1606dn: HP Support Assistant does not recognize my Pro Laserjet 1606

  My printer has a problem.

  It is connected via an Ethernet cable and a router for three computers.  He works very well until yesterday when it ceased to print jobs sent to it, but no error message showed on the computer that sent it, and the document showed that the impression in the queue.  I deleted the jobs and tried to print a Test Page from the control panel.   The printer then crossed the entire stack of paper in the tray for printing a single line of gibberish at the bottom of each page!

  Then, a message appeared when I selected the printer icon in Control Panel that he needed attention, but gave no indication of the problem.

  I downloaded and reinstalled the latest version of the driver and also the HP "Support Assistant" software.  However, the help Wizard can not find the device cannot start if even a diagnosis.  However, if I remove the device and then reinstall Windows recognizes it, although this problem did not correct the issue.

  Where should I go from here?

  Hello @ChrisTee,

  It is a great place to get help! I read your post and see that the printer keeps printing gibberish. I want to help you solve this problem.

  Clear the record of spool and restart the print spooler.

  Clear printer spooler files and select the Spooler Service.
  In desktop mode, press the Windows key and R at the same time, to show the command line run.
  1 type "Services.msc" (without the quotes).
  2. double-click on "Printer Spooler" in the Services list.
  3. click on stop, and then click OK.
  4. navigate to '% WINDIR%\system32\spool\printers', right-click on the document and left click to delete the job.
  5 run "Services.msc" (without the quotes).
  6 double click on "Printer Spooler" in the Services list.
  7. click on start. In the Startup Type list, make sure that "Automatic" is selected and click OK.

  Disable bidirectional Support on each computer to see if that helps.

  Devices and printers, click with the right button on the printer and click on printer properties.

  Click the Ports tab.

  Bidirectional support uncheck activate.

  Click on apply and OK.

  I submitted this document to a few steps to try, to see if it will solve the problem: solve strange, deformed or illogical text, printing incomplete, or lack of text or graphics.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• Lenovo website does not recognize the serial number of the new X 61 [SOLVED]

  HiI just got a new Lenovo X 61 laptop and trying to understand what warenty I might have with Lenovo.

  Then I go to the site Lenovoes > support and try to enter my serial number. I looked at the instructions and double and triple checked and I'm sure I got it right but the site won't accept it.

  It reads:

  LVxxxxx TYPE 7674 - X 04 S/N 06/2009

  PRODUCT ID: 7674 - X 04

  that should mean that the serial number is: 7674X04LVxxxxx

  They are that no other numbers on the back with the exception of MAC address and a S/N Vista Home Basic.

  Note of the moderator; s/n, under the direction of protection own members

  I tried anouther part of the site and was able to do, I think, the instructions were just weird and seemed to say I should add two small numbers but I should really just used the SN singular 7-digit.

• HP does not recognize his own product - VG885AA

  I recently bought a new video card HP for a 64 bit system, 32-bit Windows 2003 Small Business Server running.  The device is listed as PCIe x 16 HS of HP NVidia GF 310 DP card (512).  The number of the product in the box bed VG885AA and on the card itself, I found variously 'pegatron', 'P690' & 'd10m1b83h '.

  The CD that accompanies it (CD Kit 432519-B29) pointed out that it is not compatible with WNT_5.2 and none of the sets of three drivers will install successfully (Win7/Vista 32-bit, 32-bit XP and Win7/Vista 64 - bit).

  When I try to find a driver to download on the website of HP I find that the device seems not to exist.  I have try all options, automatic detection, looking for something that fits what whatever product I've ever been, and nothing is recognized by HP (who I bought the product HP badge of course).  I can't even contact HP without display, that I have a valid product, which clearly I am unable to do so because the fact that their website doesn't seem to recognize it somehow.

  Someone has suggestions better than cursing HP in the world and write everything off as a bad debt?  Is this behavior typical?

  Clearly, I am very frustrated and have literally spent several hours running around trying to get an idea of their Web site, but any angle I approach it is very resistant to the respondent to my problem somehow either.

  If anyone can help I would be very grateful.  If there is more information that is necessary but not supplied then please accept my apologies for not realizing before posting, but let me know and I'll give what I can.

  Thank you for your interest and my apologies for the delay in responding - I had to dig up my credentials before I could answer.

  I have checked the NVidia website, but I couldn't find anything that matched what I needed.  I've mainly due to the inability to match any of the available options.

  I don't remember all the details of the solution I've used ultimately, but I remember having to update the properties of the EXE file until it has been run to set the compatibility mode for something (I can't remember which).

  I think not all worked entirely in the end, but he ran enough to allow the system to operate at a basic level at least (and this is actually quite a decent performance map wise after all - as most of our days).

• Hi the new extension manager does not recognize the new products Adobe.

  Here is the log file.

  [Warning] Tue Aug 25 13:42:10.442 2015 (ExManProductEnumerator.cpp, 146)-failed to get the version of the path of the file "C:\Program Files\Adobe\Adobe first Pro CC 2015!

  Thanks for help.

  That's right, that it is no longer supported for CC 2015 Bekessy

• I had to replace my hard drive and now windows does not recognize my product code valid what to do?

  I don't know what else to add, it's an HP computer and I've had it for 3 years. the hard drive has become corrupted and I replaced it and now windows 7 Home premium that I bought from best buy does not recognize as valid product code. What now?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• HP Officejet Pro 8620: Uninstalled the software and now Support HP does not open so I'm unable to install new software

  I have upgraded to Windows 10 and have since had problems with the scan from the printer to the PC. In the end, I uninstalled software according to the instructions, but when I tried to install the new software from the HP Support page does not recognize that I have a HP product, if I can't access the page to install the new software for Windows 10. My CD is for the older version of windows and can no longer work either. Help! Someone know how to reslove it?

  Simply download the fully functional software and drivers on HP website.

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8610/8620/8630-e-all-in-one-printer-series/5367611/model/5367613

• Microsoft does not recognize my legal copy of vista

  My copy of windows vista is legal and I have the product key information, but sometimes on my computer that microsoft does not recognize as legal copy

  Hello

  1 did you receive an error message?

  2 did you change on your computer?

  I suggest you to contact the support center of Microsoft for the validity

  http://support.Microsoft.com/contactus

  See also:

  Description of Windows Genuine Advantage (WGA)

  http://support.Microsoft.com/kb/892130

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

• Windows Vista does not recognize my Canon powershot A710IS

  Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

  Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

  ===================================
  Maybe your AutoPlay settings need to be adjusted.

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  The following items may be worth a visit:

  (927836) a still digital camera is not recognized
  in Windows Vista or in Windows XP
  http://support.Microsoft.com/kb/927836/en-us

  Windows Vista: Using the scanner and Camera Installation Wizard
  http://grok.LSU.edu/article.aspx?articleid=10705