Windows Vista does not recognize my Canon powershot A710IS

Similar Questions

• Windows7 does not recognize my Canon Powershot ELPH HS 300

  Windows7 does not recognize my Canon Powershot ELPH 300 HS, even though this is supposed to be a fully compatible device? The camera and scanner Wizard is not even burst for her... What should I do? I have a strange feeling that the Assistant camera and scanner never installed correctly and so I have absolutely no drivers of the device. Canon offers all the drivers for the camera as it is supposed to get all Windows 7automatically... I am in a real bind here. Help!

  I've fixed since the question. The camera worked well and even connected to my other windows 7 computer operated when I realized the difference between my two computers is that I had windows media player installed on the second, not the first. Apparently the .dll files suitable for the use of the camera, etc. are part of the windows media kit, and I just installed it on the computer and tadaaa first machine works!  Thanks for your time!

• Windows Vista does not recognize my Ipod Touch

  Windows Vista does not recognize my Ipod at all. He even appears in Device Manager. I know that is not my USB cable because it is new, and it isn't my Ipod because it works on Mac computers. I just need someone with expertise to help me get my computer to recognize my Ipod so I can go back to enjoy my music.

  Hello

  MTP mode for WMP11 sync - mode MSC to treat the MP3 as a reader. So you have set up in the MTP.

  -----------------------------------------
  If necessary:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Make sure that Windows is updated appropriately that there have been several USB updates.

  1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed, what is happening.
  Mine was h: I added a device that took H: and the player stopped. So I put it back to H: and the other
  device to J: and everything worked again. If necessary start - type in the area of research-> disk management find top
  -Right-click on it - RUN AS ADMIN

  Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and delete files
  and update the firmware.

  If no joy follow these steps:

  You may need a powered hub. (all the USB ports on your computer are not powered, often only 2)

  Try these:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Here, your devices are the MP3 player.

  Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need clear specific devices, as appropriate.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• My computer windows 8 does not recognize my Canon's SELPHY PRINTER. What can I do?

  My new computer Windows 8 does not recognize my Canon SELPHY printer. What can I do?

  [Moved from comments]

  Hi Jan,

  1. What is the number of the Canon Selphy printer model?

  2. have you installed the drivers from the printer?

  3 have you tried to plug it into different USB ports?

  I understand that you are not able to connect printer Canon Selphy on Windows 8.

  Check if the device is detected in Device Manager.
  Follow these steps:
  a. on the desktop, press the Windows key + X , and then select Device Manager.
  b. expand Print Queues , and then right-click on the printer.
  c. Select Properties , and then check to see if the device works properly under device status.

  Is there a yellow triangle with an exclamation mark inside, then it indicates that there is a problem with the drivers.

  Follow these methods and check if that helps.

  Method 1: It is easier to connect to a printer on Windows 8.  Simply plug the USB cable from your printer to a USB port available on your computer.  If the computer is not find the printer, then plug it into another USB port and verify.

  Some older printers can require additional information to complete the installation, so connect you using the Advanced Printer Setup.
  Reference: install a printer in Windows 8

  Method 2: If there are no printer drivers available for the printer, then I suggest you to install the driver in compatibility mode.
  Install the drivers in compatibility mode for Windows 7.

  Follow this link and install the drivers for the printer.

  http://www.USA.Canon.com/Cusa/support

  Check out the following link to install the drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Reference: What to do if Windows can't find a device
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Follow the steps and let us know the results.   If you have any other questions, please post, we will be happy to help you.

• Windows Vista does not see my Canon G12 digital camera

  I tried to upload photos today of my Canon G11 digital camera and has encountered a problem.
  I used this camera and other cameras on this computer before and had no problem connecting to the cameras.  Today, I'm having a problem.
  (1) I plug in the camera and a small window at the bottom right of my screen jumps to the top of the poster "install device driver".
  "(2)"new hardware found"window that reads,".
  Windows needs to install driver software for Canon digital camera»
  There are three choices:

  • Locate and install driver software
  • Ask me later
  • Do not show the message for this device

  (3) I click "locate and install driver software" and I get a updated driver software - error of digital Canon camera that reads, "Windows has encountered a problem installing the software driver for your device."  Windows found driver software for your device but encountered an error trying to install it.
  Digital camera
  An error occurred during the installation of the device:
  Cannot install the driver because he is only not digitally signed properly.  Contact your hardware vendor. »

  I tried to reboot several times, and I tried to uninstall the device from Device Manager and reinstall the device. None of these worked.  |

  AFAIK there are no drivers for this device on the Canon website.  How can I get my Windows Vista computer to recognize my Canon G11 camera?

  Thank you
  John

  a screen pops up announcing that a new device has been detected.

  The drivers for this device are not installed. (Code 28)
  To reinstall the drivers for this device, click on reinstall.

  Yes there is no drivers for the device. The software supplied with the camera must be installed. The camera window should open when the camera is connected to the computer. Try using another USB port or use another cable, it can go bad too.

  In the Device Manager expand Universal Serial Bus controllers, search for the connected camera or something as a mass storage device. Right click above and uninstall, then restart, it needs to be reinstalled. If does not uninstall everything under USB controllers and then restart your computer.

• Windows Vista does not recognize my DVD player. It is a Pioneer DVD - RW DVR - 110 d ATA Device.

  I looked at the information system and noted that there is a device error.  After checking for a solution online, this is the message I got:

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39.

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Computer Windows Vista does not recognize the USB mouse

  Original title: does not recognize usb devices... Im trying to use the mouse... got a new mouse... still does not recognize it

  worked but stopped, got a new mouse and still does not recognize it. I really need it... help please

  Hello

  
  1. do you get an error message?
  2. would either not detected other USB devices in the same port?
  
  Method 1: perform the steps in the article mentioned below and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  
  Method 2: run the Fixit and see if the problem is resolved.
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 3: update the chipset drivers and see if the problem occurs.
  Note: you must contact the manufacturer of the computer to update the chipset driver.
  
  Hope this information helps.

• Windows Vista does not recognize my external hard drive, Eagle Consus AND-CS2PSU2-BK

  I have an HP Presario laptop running Windows Vista and it does not recognize my external hard drive, or my flash drives.

  I have an external hard drive Eagle Consus AND-CS2PSU2-BK.  It worked fine on my desktop, which works on XP.  I plug it to my computer laptop and nothing.

  When I plugged it in the first place, he says that he needed to download the drivers.  I clicked 'ok' to automatically download drivers and a few seconds later, he said that it successfully completed the driver download/install.

  I look under the drives in my computer and he's not here.

  I went to start, right click computer, left you click on Manage and double-clique then under storage disk management.  All I see are C drive and recovery disc (D).  No other drives displayed.

  I exitted who and set up the Control Panel, double click on Device Manager.  He said in the other topic peripheral USB to ATA/ATAPI bridge.  I don't know whether or not it is my external hard drive.  It indicates the Type of device: Other Devices and under device status it says: "the drivers for this device are not installed. (Code 28).  This operation requires an interactive window station.  To reinstall the drivers for this device, click on reinstall the driver. »

  He asks if I want to reinstall the drivers, so I clicked that.  He couldn't find them / install them.

  Still, I don't know if USB to ATA/ATAPI bridge is still linked to my external hard drive.

  Help, please.  The same thing happens when I try to plug a flash/USB.

  Try this:

  In the right click 'USB to ATA/ATAPI bridge' Device Manager under the other devices section, click unsintall or press the delete key. Reset with the connected hard drive it must be reinstalled, but under the USB controllers. Make sure the device works on the other computer cable can also go to bad.b

• Windows Vista does not recognize the removable storage device

  ISSUE INITIAL 2010-03-03)
  Here's the scenario:
  1. Insert the card compact flash.
  2 computer recognizes the removable storage (that is, it is assigned a drive letter and appears in disk management).
  3. use the icon remove the device safely in the taskbar to stop the machine to remove safely.
  4. remove the card compact flash.
  5. Insert the compact flash card.
  6. the computer does not recognize removable storage (that is, it is not assigned a drive letter and does not appear in disk management).

  The only way I can get windows to recognize the drive is to restart my computer. How can I get windows recognize the drive without having to reboot?   This problem does not occur with USB flash drives.

  Windows Vista Hame Premium, 64-bit, Service Pack 2 operating system

  UPDATE (04/03/2010):
  I have more information, I hope this helps to reach a solution.

  -J' repeated the steps above 1 to 3, with open Device Manager.  In step 3, in the Device Manager window, the icon for the question USB mass storage device becomes the exclamation point in yellow triangle icon.  Check its properties on the tab "General", in the "Device status" box, it says: "Windows cannot use this hardware device because it has been established for"safe removal", but it has not been removed from the computer. (Code 47)  IX this problem, disconnect the device from your computer and then reconnect it.  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
  -J' then removed the card and rest of the error state.
  -J' I re inserted the card, and rest of the error state.
  -J' I then tried to update the driver by accessing the tab "driver", click on "Update driver", click on "Automatically search for an updated driver", and the result was "the best driver for your device is already installed."

  I found the solution on this hp web page:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07910&tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3876397&lang=en#N1074

  Basically, it says NOT to use the function "remove the device safely.  Instead, just right-click on the drive in the Solution Explorer, then choose "Eject".  Works perfectly.

  Some excerpts...
  "Memory card readers are devices that use the icon remove the device safely in the notification area in the taskbar). Do not click stop in the window, remove the device safely. Doing so can disconnect the card memory reader for Windows. In this case, restart the computer to reset the memory card reader. »
  "An alternative to the restart of the computer is to use the option optimize for fast moving functionality in Windows.

• Windows 8 does not recognize my Canon Vixia HV40 by fire wire. Help!

  Hey guys,.

  I'm having a problem with trying to capture video from my Canon Vixia HV40 and do it on Adobe Premiere Pro CS6.

  I think that the main problem is that my laptop (running Windows 8) does not even recognize my camera using a fire wire.

  I've linked download these drivers and nothing works. Can someone help me please?

  I use fire wire that turns a USB port, if that tells you anything.

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  Let me try and help you with the problem.

  1. you try connecting the camera for the first time on your computer?

  2. have you made sure the Firewire cable is working correctly?

  3. What is the status of the camera in Device Manager when you connect?

  To open Device Manager, press the key Windows key + X and choose Device Manager.

  In Device Manager, check if the camera is recognized.

  If the camera is not recognized, you may need to check the issue by using a different firewire cable.

  I also suggest you to run the hardware troubleshooter and check if that helps.

  1. Point to the upper right of the screen and then move the pointer of the mouse to the bottom and click on search.

  2. Enter Troubleshooting in the search box, type or click Troubleshooting, and then click hardware and sound.

  3. Click hardware and devicesand follow the instructions on the screen.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• Windows Vista does not recognize the graphics card and the broadband

  Original title: recognize the graphics card and the broadband connection

  Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop

  Hi mfadhelmu,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  4. have you updated all device drivers?

  You can try to launch the Fixit and see if it helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• WIndows 7 does not recognize my Canon EOS 60 d camera

  When I plug my camera into the USB port windows does not recognize it.   I can't see my camera in my computer.

  Now it is solved - uninstalled under portable devices and it works now

  When I plug my camera into the USB port windows does not recognize it.   I can't see my camera in my computer.

  I went in the systems and portable devices, I saw EOS 60 D.   I uninstalled it and now it works again

• Windows Vista does not recognize Canon digital camera

  I have trouble getting Windows Vista to recognize my camera Canon Digital Rebel XT.  I did the following:

  -Update the driver from the Canon - camera website appears in the 'Computer' window as an external hard drive
  -Find the device in the Device Manager under imaging devices like Kiss_N_Rebel_XT EOS 350 d, click right, uninstalled, and turned off the camera.  Turned the camera back on and the drivers were would have been installed correctly.  The device still does not appear as a disk in the window 'computer '.

  How can I access files on my camera?

  Thank you.

  Hello GDB8791,

  Thank you for posting.  The only time where I can think about when a camera come in the 'Computer' window would be if it has a type of storage device that it contains.  For example, a flash drive or memory key/card.  Check if you have the storage card inserted in the camera.  You can also open the Photo Gallery and select Import to see if it will access the camera.

  Please let me know if this helps you. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista does not recognize external USB 260 GB HARD drive

  I have a 260 GB Seagate external hard drive, a laptop Toshiba satellite and Windows Vista Basic.

  The same Windows usually choose the hard drive when I plug it, it does not appear in Device Manager and in disk management, the only way I can get it to work is to uninstall all the USB root hub and then restart the computer, and then reinstall the USB root hub and plug my hard drive.

  When windows finally recognizes him, the only way to find the driver must choose c:\ manually and there's the search for the computer.
  Works for the time that I have the computer hard disk, but when I stopped it, next time I use the computer, I'm having exactly the same problem.

  I tried to remove the hard drive safely and then close the computer and by him plugging back in after windows has loaded, I tired it connected from the computer and tried to close the computer with connected.

  None of these work.
  Can someone help me please?

  Strange?  :|
  But what need s say Microsoft Windows so I don't expect 100% without bug OS ;)

  Disconnect the USB HDD and remove all the USB ports and Device Manager USB controllers. After restarting again the OS should reinstall ports. Then you could try to reconnect the HARD drive.

• Windows Vista does not recognize the CD

  Windows Vista has ceased to recognize my driver CD - good player, good good Bios everywhere but keeps ejecting discs that will play in the other computer and they played on this one.  Please help - at the end of my tether.

  Won't play CD

  Hello

  1 did you software/hardware changes to your computer before this problem?

  Try to solve this problem automatically by clicking Fix I have in the articles below:

  Method 1:

  Update the Firmware on the manufacturer's Web site.

  Method 2:

  To resolve this issue automatically, click the fix this problem link. Then, click run now button from the Automated Troubleshooting Services page and follow the steps in this wizard.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Hope this information is useful.