Microsoft Update KB3133977 causes the USB problem

When update KB3133977 is installed, it takes up to 90 seconds to recognize the memory sticks USB. Once recognized they are functioning normally. It takes up to 90 seconds to uninstall the sticks of memory above all other sticks can be recognized.

I use one running Windows 7 Professional SP1 64 bit of the Acer TMP645-MG.

Remove the update corrects this problem.

Is there that a solution to this problemthat will allow the update run?

How can I avoid this download installed automatically without affecting the other automatic updates?

Thank you

Welcome & thank you for your comments.

Tags: Windows

Similar Questions

  • Microsoft Update disconnects from the Internet

    After you install the latest Microsoft Updates, my internet is disconnected.  I went back to a restore point before that updates and the internet works fine again.  I have Windows 7.  For now, I have disabled auto update, as I don't know what update is causing the problem.

    The KB2705219 update could be the cause and uninstall that solved the problem for some users.

    To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

    But...

    See this notice - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you should do the fix McAfee, if necessary. At least two users also reported having removed then reinstalled McAfee and their systems were back up & working properly afterwards.

    I have McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated. Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

    I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  • external hard drive remains unknown and microsoft updates fail all the time.

    Original title:

    drive external hard usb not recognized windows 7 ult in devices like unknwon d Manager

    External case hard IDE usb 2

    Windows 7 ultimate
    in Manger vice of with yellow mark
    not in my computer
    cannot re trying to get my old file format
    not in disk management
    2 microsoft updates fail all the time
    analysis tool I tried and it would not install

    You have two numbers;

    (1) not recognized external - usually drivers are not needed, they are integrated in win7

    (2) windows update fails

    You need to solve (2) before watching (1)

    Disconect all external devices, visit your site from PC manufacturers, or the manufacturer of the motherboard if a generic desktop computer and ensure that all drivers have been updated.

    This in a first time, and the report once that windows update has been resolved

  • Satellite L750D - update BIOS causing the CD Player problems

    I have a L750D-1GC Satellite running Windows 7. Recently I updated the BIOS to 1.60 04/05/12 THIS worm 1.40

    I noticed that since that more that I have problems my CD player in what I can read CD/DVD but does not burn. Using burning software, it appears the combustion happens (rotation of the disk and green light), but at the end it breaks down. I have tried several Microsoft Fixit program but the problem persists, help?

    I put t think that the BIOS update would impact on the functionality of CD/DVD drive.
    Usually, the firmware of the CD/DVD drive contains information about the compatible media and I put t that any link between this question and the previous update of the BIOS.

    For me is looks like the laser lens is dirty or the lens may not be properly calibrated to read/write from the disk
    Try to clean the laser lens with cotton wool trick and liquid alcohol in many cases this would set similar question and the player couldn't handle the media properly.

  • "Microsoft Update" cannot install the downloaded updates

    CURRENT SITUATION (11 October) - PC with Windows XP Pro.

    -To access the site MicrosoftUpdates (with IE8) is OK (yesterday almost impossible;) Very slow PC).

    -"Search for updates for this computer" is possible, but it takes a long time before the list appears. Most people with this same problem think it hangs, with the activity display bar process for eternity, never finishing. But I just think, they are not patient enough, because it's really time consuming.

    -Meanwhile, the CPU takes almost 100% of the activity, caused by service a specific svchost.exe , which I identified as 1436 service id. (EDIT: maybe it was actually 1644 as I see today)
      \system32\svchost.exe - k netsvcs
     
    All updates are detected for installed software and are shown in the usual categories. The installation of each of the updates appears one by one.  However immediately after fact following a message that lists updates whose installation failed (usually 100% fail to install for now)

    What I have:

    1. I checked 3 services to ensure that the correct settings
    -Implemented automatic update (automatic, started)
    -EventLog (automatic, started)
    -BIT was missing, but I managed to install it again

    Not without effort, I found these guidelines:
    http://helpdeskgeek.com/how-to/Background-Intelligent-Transfer-Service-will-not-start/

    Now the BITS he listed (with auto-start), but it fails to start, even manually!
    If I concentrate on the BITS service (could not be started) this may to solve the "problem of update.

    2. I started Windows PC files check sfc/scannow and restarted the system (nothing wrong detected or corrected... I think)

    3. change of standard browser from Firefox to IE8

    Thank you for the help

    Thanks Nirmal S,

    I apologize for not having mentioned earlier that this problem has been resolved.

    FYI, I use Avast! Antivirus (free version). No malware was involved, but thanks for the useful information.

    I found a ready-made channel to reinstall the BITS service, which apparently takes care of a few other things in the registry.  I do not understand what it does, but it worked for me.

    Current situation:
    -Little service is installed and is now ok.

    -The Microsoft Update site updated analyses required for the installed software/hardware and displays a list. It downloads the installation of each update program, but not an update can be installed.


    Since the fundamental problem, I recently started a new separate topic for the same question,
    to avoid a much too long discussion here. However, if someone wants to add suggestions hereanyway, you're welcome. Thank you

  • Update kb948465 caused the error 80070490 error code

    KB948465 low load failed in sept 09, no down load came in the sence, checked several times and tried to get them, nothing. I finally found this site.

    http://support.Microsoft.com/kb/958044

    You receive a ""0 x 80070490 "error code when you use the Windows Update site or Microsoft Update Web to install updates"

    If the information above does not resolve the problem:

    It's updated operating system Vista, upgraded installation and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Update KB2756872 kills the USB ports

    Hello.  I just went through the update to Windows 8 Pro.  I have a big problem with the KB2756872 update.  Whenever I have perform the update all my USB ports stop working.  My motherboard is a I have an ASUS P8Z68-V Pro/Gen3.  I put updated to the latest BIOS and drivers for everything I have (except the X - Fi Titanium, which has no updated drivers).

    I went through a comprehensive process of elimination to try to find if it is a driver issue, and it appears not to be.  The problem is definitely related to the KB2756872.  Whenever he moved, the USB ports stop working.  I have to perform a restore to the restore point previous to make it work again (I get good here now).
    Help, please!

    I have an asus p8p67. In my case, I can solve the problem in accessing the BIOS and telling the computer to start from the "windows boot manager" instead of my main hard drive.

  • Installation of SP2 on my Satellite Pro L10 causes the USB ports fail

    I just installed XP SP2 on my L10 and USB ports no longer work.
    There is no error in the Device Manager, the device in the USB ports are not recognized.

    I removed SP2 and USB ports are functioning again.
    Model No.: PSL15E-00H018EN

    Any suggesttions? Thanks in advance.

    You simply remove the USB controller from Device Manager.
    After that the new charging USB ports should work again!

    Also see this MS article:
    http://support.Microsoft.com/kb/892050/en-us/

  • in Microsoft Update, I get the Error Message: Ox 643

    When I try to download "Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2833941)", I get error message 643 Ox. What can I do about it?

    Also, I can't get rid of the small yellow crete icon in my taskbar. How can I remove, if the download of security will not download?

    Bravo and thanks,

    Cath M.

    Cath,

    Please see:

    During the installation of .net Framework updates with Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643

    >>

    The current time and the date now in Baja California, Mexico

    13:52
    Friday, August 2, 2013
    DST - 0700 UTC
     
     
    UTC/GMT is 20:52 on Friday, August 2, 2013
                
    Current weather conditions in San Felipe

    Cloudy93 ° F / 34 ° C

  • How to install the missing dll files when I try to get latest microsoft updates and get the error msg ox8024D007

    I can also access my control panel, but when I try to add/REMOVE a program it says that is missing a required dll file

    You could try auto fixit or manually install the microsoft update agent.

    http://support.Microsoft.com/kb/949104

    Or refer to the knowledge base article:

    http://support.Microsoft.com/kb/956701

    Agent update for the x 86 system.

    http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

    The updateagent for x 64-based system.

    http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x64.exe

    I hope this helps.

  • Will cause the USB after update

    3 times since Nov 09 new Pavilion hp W7 after update a sound system was produced as Plug and unplug a usb device. I can't locate where is turn off except by inhibition of system sounds. He must have done something in the BIOS?

    Contact HP support? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • update computer caused the loss of HP webcam (fixed) video camera just keeps loading

    This same problem has been resolved about 1 week ago by the community, but since Microsoft is updated and it loads just continually once more. I tried the latest patch which has been uninstall driver and reboot, but even if I tired it a few time it doesn't fix it this time ideas?

    Given that the same drivers buggy being reported by the operating system, try to update your drivers for the generic "device drivers video USB" that come with the operating system (as shown below) and see if that makes a difference.

  • Update Vista caused internet connection problems

    I have tried repairing computer of my sister, who says simply ceased to connect to the internet all of a sudden.  She said that began February 1... After looking through the system restore, I noticed there was an update installed on 31 January, so I restored the computer to the day prior to that, and now the internet works again.  Since then, I have disabled the automatic updates.  My question is: How can I solve this problem?  I can't leave just for always updates disabled...

    Hello
     
    Please can you us on the update that is causing this issue?
     
    This problem occurs especially if there is a conflict between the update and the application program on your computer, mainly the antivirus program.
     
    That's why I suggest to disable and re-enable the antivirus program or the security on your computer and try to update the verification of updates if the problem is resolved.
    Ensure that you re - activate the security on your computer program after a repair.
     
    Try here to reset windows update components and then try to install the updates.
     
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Also, I recommend you to uninstall and reinstall the network drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

    1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and
    Maintenance and then click Device Manager. If you are prompted for an administrator
    password or confirmation, type the password or provide confirmation.
    2. in Device Manager, locate the device, and then double-click the device name.
    3. click Driver tab, then click on uninstall the driver and follow the instructions.

    Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Also try to troubleshoot using the network troubleshooter in Windows 7 and make sure that the error message to follow the link provided below.

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Thank you, and in what concerns:
    I. Suuresh Kumar-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Update MSXML caused the failure of Quickbooks, why?

    Windows has an auto update on the MSXML program packs, which interfered with my Quickbooks Pro, anyone else have this problem?  Why Windows do not inform us of a possible conflict?  QuickBooks has charged me for the difficulty, and Microsoft won't yet talk to me unless I have buy more support.

    It's QuickBooks support on how to fix the MSXML.

    http://support.QuickBooks.Intuit.com/support/articles/HOW13338

    I hope this helps.

  • Download of update KB982312 causes the error code 646

    Hello

    COULD SOMEBODY PL HELP ME TO INSTALL THESE UPDATES. FRUSTRATED TRYING TO DOWNLOAD THEM. SOME ARE NOT DOWNLOAD ARE KB982308, KB979441 KB982158, KB982135, KB982312, KB982331. WHEN I TRY TO DOWNLOAD IT, THEY SEEM TO DOWNLOAD IT UNTIL THE KB982312. FOR SOME REASON, HE IS UNABLE TO DOWNLOAD IT WHICH SEEMS TO HANG ALL THE OTHER MENTIONED DOWNLOADS. NEXT, I GET AN ERROR 646 COD.

    PL HELP

    Thank you

    ED

    * original title PROBLEMS DOWNLOADING THESE updates *.

    Double post:

    If you experience problems with the Office updates, try to manually download the same and install.
    You can search the individual updates here:
    http://www.Microsoft.com/downloads/en/default.aspx

    He just put in the KB number and then perform a search.

    If this still creates a problem, then try to disable User Account Control first download before the update manually. See: (Guided Help: settings to adjust user account control in Windows 7):
    http://support.microsoft.com/kb/975787/en-us.

    Vista: http://windows.microsoft.com/en-AU/windows-vista/Turn-User-Account-Control-on-or-off

    or disconnect from the internet and try the update again.

    TaurArian [MVP] 2005-2010 - Update Services

Maybe you are looking for

  • Cannot take a picture with the Camileo X 100?

    After connecting my Camileo X 100 with the RCA connector to my LCD from LG TV, browsing through my images and possibly disconnect the camera, something strange happened. After I turned on the camera and tried to take a picture, nothing happened. I ca

  • How can I hide multiple instances of VI on the taskbar?

    I am a newbie to LabVIEW OOP, during the process of debugging the project I tend to use in step function to test & see Subvi & this will lead to open several sub forums vi on the taskbar That's fine if the number of under vi is limited & fits into th

  • remove the demo mode off the coast of the b1 iconia Tablet

    my Tablet has deviated on demo mode and I can't turn it off. It only lights up when the tablets serves does not, but it's a little awkward and a drain on the battery of tablets. I tried to reboot and there is nothing in the settings which shows how t

  • VPN issues with XP machine

    Hi all I'm sorry but I don't want to repost everything. It would be better if you just look at this link. I just posted the entry lost about 5 minutes ago. I'm looking for an answer, and thinking that it should be a larger community, I hope I can get

  • my car so far has stuck on 8% for the last 24 hours can't be stopped

    Why can't stop the date by stopping on the laptop so far