Will cause the USB after update

Similar Questions

• Cards will be open any after update 9.3. Anyone else having this problem?

  Cards will be open any after update 9.3. Anyone else having this problem?

  No, not at all. Cards work properly.

  Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.

  Also, make sure card is configured to use mobile data (settings app > cell phones > cards [turn it on if it isn't already].) And that location services is enabled for it (settings app > privacy > location Services)

• When you try to move an image to a folder, whatever that means - "this will cause the file on the disk to remove. If you continue, this movement or any changes you made before it can be canceled?

  When you try to move an image to a folder, whatever that means - "this will cause the file on the disk to remove. If you continue, this movement or any changes you made before it can be canceled?

  I saw wording like this before, and I don't think it's anything to worry about. I don't know why Adobe chose these specific words, that your changes are certainly editable after the move.

• Non-us Xoom will get the 3.1 update, which includes SD support this week

  Non-us Xoom will get the 3.2 update which includes SD support this week

  I asked a psychic, she could not be more precise, she needs a photo of Matt without funky shades, the update could start tomorrow.

• Computer does not recognize the monitor after update of Win7.

  Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

  It is a laptop?

  And if you start in safe mode?

  Desktop

  Haven't tried safe mode
  Disconnected the projector, and then restarted; back to work now!

• What specific products are part of the complete abo for cs5-client, which will be the price after one year and will be the rice price information early enough to cancel the contract? Best regards Jürgen

  What specific products are part of the complete abo for cs5-client, which will be the price after one year and will be the rice price information early enough to cancel the contract? Best regards Jürgen

  For details please see the link below:

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  Otherwise, you can reach the Adobe sales as well.

• Do pop ups: update of Kaspersky Anti-virus and Unspecified changes to CONFIG SYS may have caused the problem after an unexpected shutdown and attempt to restore the system.

  Original title: unable to system restore

  After the unexpected stop down and try the system restore.  I got up a window pops that says update my KASPERSKY anti-virus program, I do not have KASPERSKY.    Another said unspecified changes "caudate root found" SYS CONFIG window may have caused the problem.   Any ideas?  I have Vista and Trend Micro Internet security

  Hi JevenStulie,

  1. are you able to boot into normal mode after receiving these error messages?

  You can try these steps and see if it helps.

  Step 1:

  You can check if the problem occurs in safe mode with network.

  Start your computer in safe mode

  Startup options (including safe mode)

  Step 2:

  If you do not experience the problem in safe mode with network, then you can read the following article to download the Microsoft Safety Scanner and analysis complete on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

  Hope this information is useful.

• Microsoft Update KB3133977 causes the USB problem

  When update KB3133977 is installed, it takes up to 90 seconds to recognize the memory sticks USB. Once recognized they are functioning normally. It takes up to 90 seconds to uninstall the sticks of memory above all other sticks can be recognized.

  I use one running Windows 7 Professional SP1 64 bit of the Acer TMP645-MG.

  Remove the update corrects this problem.

  Is there that a solution to this problemthat will allow the update run?

  How can I avoid this download installed automatically without affecting the other automatic updates?

  Thank you

  Welcome & thank you for your comments.

• UI of Firefox is slow by typing or selecting the text (after update 33.0)

  After the 33.0 update, I noticed that typing a backspace in any area on a Web page or even in the Firefox address bar is slow to echo, on a lag of 1 second. Also, by selecting the text typed (to remove a TI, etc.) by a click-and - drag quick selects the entire, but when I click in the dialog box to deselect, the part which has not been posted as selected initially, is selected for a moment before the string whole hilite selection disappears.

  What makes the browser very cumbersome to use.

  This seems to be new to 33.0. I tried to reset Firefox, but it does not solve the problem. No problem in IE 11.0, so I do not think that the malware. I have also to keep all s/w and run avast/zonealarm for safety. I've never had an infection of malicious software on this machine. Win7 Home Premium 64-bit, 8 GB of RAM. The use of resources is low, so not out of process control.

  I have request the latest Microsoft "Patch Tuesday" updates 15/10, the same day that I updated to Firefox. This can complicate the diagnosis. But even once, IE was not affected, then, how the different Firefox UI for basic keyboard/screen I/O?

  If there is an easy way to "downgrade" to the 32.0.3 prior revision, I could try to confirm. Help, please!

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check for problems with the sessionstore.js and sessionstore.bak files in the profile folder of Firefox that store session data.

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Multiple_profile_files_created

  Delete sessionstore.js will cause App Tabs and groups of tabs open and closed tabs (back) to get lost and you will have to re-create them (take note or bookmarks if possible).

• Pages crashing all the time after updating the OS 10.11.3

  Hello, I have problems with Pages crashing since I received the update OS X El Capitan (10.11.3). Common problems are:

  • Pages could open documents with considerable delays: when I double click on a file, it may take up to 20 seconds before opening the document (at the same time, the only thing running is 2 tabs in Safari with non-intensive websites like Wikipedia);
  • Pages would not open to all documents: sometimes it refuses to open my documents either. When I choose for example a document on the 'Recent' via dock icon Pages list it will not launch it. If I wait for awhile and just click the Pages icon, hoping that it will be launched the document in the background, he brings just to the top of the window with the models as if I wanted to open a new document.
  • 'Missing font"all the time: I did not the latest changes to my fonts, but when I opened a document originally created in Pages (and not a converted copy of an old Word document) it always gives an error message "missing fonts" - particularly associated with Microsoft fonts. I downloaded and installed Cambria and Calibri manually and it fixed the problem... for about 8 hours, then he started again.
  • Beach ball rotation of death during the execution of simple operations: it's exasperating, but every now and then when trying to type or text in bold (and similar), the beach of death ball will appear, making the Pages does not.
  • Crashing before loading the same: when I force quit the app because it did not and then I try to run again, often they no longer again before loading the same. What the...?
  • Impossible to duplicate documents: at one time I thought that it is a certain file at the origin of all evil, so I tried it duplicate several times - which of course caused Pages to plant again and again. Same thing happened when I tried with other files.

  I had a similar problem before and it was fixed to restore the default fonts and removing duplicates in the FontBook app, but unfortunately it did not this time.

  I don't know what is wrong or why. It was working OK just a couple of days. Anyone else have similar experiences with it? Looks like Apple may not come out with an update that doesn't break the workflow of the people. But yay, more emoticons and pictures Live Webcam on the way!

  Because my Pages on El Capitan 10.11.3 v5.6.1 works very well with any of your questions, I believe that it is not Pages, but something out of Pages in your environment operating system as a cache of corrupt police, duplicate fonts, or damaged preferences file. Perhaps it is that you are too many applications running for your memory availability and Pages of hunger. All in due time.

  Let's start with a secure boot that will clear the system and local caches, rebuild the database of the police and then see if it stabilizes your use of the Pages.

  Secure boot

  1. Shut down your Mac.
  2. Press the power button and immediately press on and hold down the SHIFT key until you see the horizontal progress bar. I usually wait until it's an inch along before I release the SHIFT key. Personal touch.
  3. You will arrive at a login window. In the upper right screen, you'll see Safe Boot in red letters.
     1. After you type your password, stop, then press and hold the SHIFT key again once, before you click on the right arrow to open a session.
     2. Continue to hold the SHIFT key until your painting of icons on the desktop.
     3. Because many drivers are not loaded, graphics performance is not optimal, and may feel morose.
  4. Test Pages in startup mode to see if the problems have disappeared.
  5. Restart normally.
  6. Start Pages and open a document.

  Previous post the results of step 4 and 6. Have what improvements (if any) you noticed?

• Videos playing only with the sound after update 49.0.2

  After updating Firefox to 49.0.2 I have problems with videos on sites like: http://www.cc.com/video-clips/07m87l/the-daily-show-with-trevor-noah-donald-trump-hints-at-a-not-so-peaceful-transfer-of-power or http://time.com/4514971/iphone-7-worlds-tallest-building/

  It has sound, no picture, just black background. Decommissioning of 48.0.2 helped, but Netflix videos do not work on this version.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful. (2) in the above list, type or paste async and pause search box while the list is filtered (3), double-click the preference dom.ipc.plugins.asyncdrawing.enabled to switch the value from true to false

  This may not take effect until the next time that you exit Firefox and start it again.

  One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:

  • button '3-bar' menu > '? ' button > Troubleshooting Information
  • (menu bar) Help > troubleshooting information
  • type or paste Subject: support in the address bar and press enter

  In the first table on the page, find the line of Multiprocess Windows and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.

  If you use e10s:

  To determine if this feature is causing this problem, you can turn off as follows:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered

  (3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false

  Note: the exact name of this preference may vary, but it will start by Browser.Tabs.Remote.AutoStart

  On your next startup of Firefox, it must be run in the traditional way. Any difference?

• Urgent: need help on problems on the iPhone after updating iOS 10 6s

  Hey there! It's my third post about the problems Ive been face on my devices after 10 updated iOS. Initially, after that I've updated, the music app was not running on my phone-all I could see was an empty screen and the APP crashed and I was redirected to the homepage in a few seconds. Tired to restart the phone, deleting and then adding the app back, nothing worked. Not at all. So I tried to restore my phone, save all content via icloud. Followed all the steps and after the restoration of the aircraft of other problems surfaced, BUT the music app still does not work.

  Now, not only the app does not work, I can no longer sync my iPhone with iTunes. Whenever I try, I get the following errors:

  (1) itunes cannot sync the iPhone connection has been reset

  (2) iTunes sync session could start.

  IF PLEASE NOTE, BEFOR RESTORE IPHONE I COULD ALWAYS SYNCHRONIZE WITH ITUNES EVEN AFTER IOS UPDATE 10 AND TRANSFER THE MUSIC ETC, BUT JUST COULDN'T NOT OPEN MUSIC APP TO PHONE-NOW I CAN'T DO EITHER!

  I have tried pretty much everything, restart both phone & iTunes, reset the network settings on my iphone, reset itunes sync history, by removing the lockdown folder, running iTunes as administrator on my PC, change my USB in corduroy, update iTunes, reinstall iTunes on PC-nothing seems to work AT ALL. And it's extremely frustrating. I can sync music/documents on my iPad after update of the device and the restaurant then (iPad also has major problems) and then play the music on it but just isn't my phone can be synchronized. It is a function important and if I can't synchronize my device is a sitting duck.

  The new update of iOS also gave my massive lag of phone. Screen freezes, apps for time-consuming, HDR photos take longer to be broken. It is just too heavy to wear.

  CCAN anyone help me please with my iTunes sync + music matters app... I really regret updating to the new iOS. Please help me.

  Thank you.

  PS apologies for this long post, I had to write everything I tried.

  If you are on Windows, uninstall iTunes, uninstall Apple Mobile Device Support. Once both are uninstalled, reinstall itunes, see if it syncs with itunes then.

• iPad smart keyboard does not change the language after updating iOS 10

  Smart keyboard on the iPad (in English) does not change after updating to iOS 10, put in language. He's stuck in English. Pressing on the globe (change language button) displays the language menu, but after selecting the language, the keyboard is still in English.

  I have reset all settings. Erase all keyboards, adding them again.

  Any ideas? Does anyone have the same problem?

  Howdy, rapretzan! Thank you for using the Apple support community!

  Great work to solve your problem until now! Apparently to reset all the settings and erasing/re-adding keyboards for iPad Pro still isn't allowing you to change the language since the upgrade to iOS 10. I'll be happy to help you.

  How to back up your iPhone, iPad and iPod touch - in order to get your keyboard working properly, I'll have reinstall you the iOS. Please backup your personal data to keep it safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on a computer to clear completely your iPad you can install a new copy.

  The first time, select "Set up as new iPad" and ignore connecting them to iTunes and App Store and iCloud. See if you are able to get back with your Smart keyboard languages. If you are, go to the next step.

  Restore your iPhone, iPad or iPod touch from a backup - use this article to guide you through the steps to send your personal information to your iPad Pro.

  Have a great weekend!

• Why have I no internet connection, no cell phone, no wi - fi on the iphone after updating ios 9.3.1 5?

  Why have I no internet connection, no cell phone, no wi - fi on the iPhone 5 after update to iOS 9.3.1?

  Settings network is possibly damaged.

  Tap settings > general > reset > reset network settings

  Then see if your iPhone can connect to a Wi - Fi network.

  You will need to enter your Wi - Fi password.

• zBook 14 - cannot change the resolution of the screen after update

  After I installed software updates the portable suggested to me, my screen resolution went suddenly from 1900 x 1200 at 1200 x 720 after reboot and it won't let me change it, not even to a lower resolution. I'm very frustrated, because I need the computer week next for visualization work and I really need the screen works well.
  
  It doesn't let me change the resolution. Graphics and display drivers are up-to-date and functioning according to Device Manager. I did a system restore, but that just do everything worse although the resolution worked once again thing, I had to run a repair of the start several times before that my laptop would be starting another property again. This does not resolve the issue, given that the display drivers are not working properly (videos have been viewed very badly) and even after updating the computer won't start again, so I had made another system of recovery and now I'm to the point where I can not change the resolution and starting to be really frustrating. Also, (if it even starts) Windows is constantly freezing, forcing me to hard reboot.

  Thanks for any help, that all the world can offer.

  This looks like a lot of problems, you have there.
  
  First thing I would say is to do a check of the basic material. Your laptop will be built Diagnostics the F2 button on the HP logo. The hard drive on a test extended (approximately 45 minutes - 2 hours) and the memory test. If these two go, consider downloading of UEFI diagnoses from the above drivers download section. In all honestly, I think this unnecessary step for most, it tells not usually defects that are already not obvious. But he should have a graphics test, if it will throw a failure even if it is faulty is another matter but when even, of a value of a test.
  If all else fails, download on the phone for the HP warranty.
  
  If anything fails, run the memory on memtest86 + for about 12 to 24 hours. Download you, it's free, burn it to a cd and the start of it. And it works simply, in case of error, you have a fault memory.
  
  If anything fails on any diags, then nothing is most likely false, cool reimageries windows probably will solve the problem and its probably just a form of spyware or corruption of driver or something. Backup your data, reinstall a new copy of windows.
  
  But in my experience, from doubtful, repairs etc... freezing randomly and other problems are often a sign of a failing hard drive. And diagnostic tests are not always 100% to pick up a failing drive. For the most part, but not always. So, if its still high reading after a reimage, review the reader always a potential source of the problem.
  
  To the extent where it won't let you change the resolution? What you mean? As for the option is grayed out? Can you maybe post a screenshot and a screenshot of your device with the extended graphics card Manager.