Mid-2013 MacBook Air sees buy do not mount or format a 128 GB USB 3.0 flash drive

Similar Questions

• Nighthawk R8500, USB 3.0 Flash drive not recognized USB 3.0 Port, Port of only 2.0

  My Nighthawk R8500 router with the latest firmware, V1.0.2.54_1.0.56, does not recognize my SanDisk Ultra Fit 128 GB USB 3.0 Flash drive when it is connected to the router USB 3.0 Port. The Ultra Fit is formatted in FAT32 and works fine when plugged into USB Port 2.0 router or my laptop.

  At first, I thought maybe USB 3.0 Port on my router wasn't working at all, but it recognizes my SanDisk 16 GB Cruzer USB 2.0 Flash Drive that is also formatted FAT 32. Unfortunately both my laptop have USB 2.0 Ports, so I don't know if the problem is with the router or the Ultra Fit Flash Drive. Everyone knows about this problem of their Flash 3.0 player is not recognized in USB 3.0 Port their router, especially with a SanDisk Ultra Fit? This problem can be resolved through firmware? I'd really like to take full advantage of the speed of USB 3.0 as I like to share files through my router via ReadyShare and ReadyCloud.

  Thanks in advance for any help, Carlos

  Technical support with me. Installation of a updated firmware, V1.0.2.64_1.0.62, which became available shortly after my post, solved the problem. -Carlos

• I'm trying to move a song to my iPhone music library to the iTunes library on my MacBook Air.  I do not want to synchronize the two, so how do I simply copy/migrate the song on my computer?

  I'm trying to move a song to my iPhone music library to the iTunes library on my MacBook Air.  I do not want to synchronize the two (and they have never been synchronized), so how can I simply copy/migrate the song on my computer?  Is there a way to do, without having to re-purchase the song on the iTunes Store on my Mac?

  E-mail (for yourself) click on it in the email

• Sharing printers has stopped working for me. MacBook Air "think" printer is not connected.

  Sharing printers has stopped working for me. I have an Epson Stylus Photo R340 connected by USB to my Mac Mini end of 2012, and until recently, my MacBook Air has been able to print to it. Now, he 'thinks' the printer is not connected. Computers are on WiFi. Both computers have an OS X 10.11.5 now and the latest driver of Epson printer. Printer sharing is enabled in preferences, sharing, and "Share this printer on the network" is checked in the preferences, printers and Scanners. I went through the hoops to remove the printer and add it again on the Mini and the MacBook Air.

  Of course, the Mini prints very well via USB. Someone has an idea (that I have not already tried) how to get the sharing of printers to work again?

  Other sharing services work, such as the file and screen sharing?

• How do you find the number on a mid 2009 MacBook AIR

  How do you find the number on a mid 2009 MacBook AIR

  Serial number? Model number?

  https://support.Apple.com/en-us/HT201665

  https://support.Apple.com/en-us/HT201300

• Satellite A200-1AE does not recognize the USB 2.0 flash drive

  I have a problem because my satellite A200-1AE with Microsoft Vista does not recognize the USB 2.0 flash drive. He asks me a program/software!
  The same USB works without problem on other computers with vista!

  Someone knows what to do?

  Hello

  First of all, you must disconnect all USB devices and must remove the USB ports and controllers in the Device Manager.
  After this procedure, you must restart the laptop. After a new restart the Vista operating system should recognize the USB ports and should reinstall USB drivers again.

  Then you must update the Vista to the State! All fixes and patches must be installed. Please note that you will have to visit the MS Update site for all patches

  Notes; MS has released a beta of Vista SP1. I installed it on my laptop and it has solved several problems.

  Best regards

• PNY attached 8 GB USB 2.0 Flash Drive recognized but does not work under the Windows 7 operating system

  I have an attached PNY 8 GB USB 2.0 Flash Drive that works perfectly on Windows XP. But when I try to use it on a Windows 7 operating system, it is very few recognized by Windows 7. I mean at least, is that when I look for the device by exploring 'Computer' in the menu start the device does not appear at ALL. However, when I go to control panel-> hardware and sound-> devices and printers, it shows a device called "DISK 2.0" which I believe are 'minimum' recognition of this 8GB flash drive, I was talking about. Can someone help me get the recognition for this camera on Windows 7? Thank you.

  Edit: I noticed in Device Manager-> USB MASS STORAGE DEVICE-> Propteries the following for my optical mouse Microsoft and the PNY 8 GB flash drive

  The Microsoft Optical mouse is the location: Port_ #0001.Hub_ #0004

  On the MagicJack (USB Composite device) is the location: Port_ #0002.Hub_ #0007

  On the flash drive is the location: 0000.001d.0002.002.000.000.000.000.000

  3rd place property looks pretty weird (Im assuming that third location data for the flash player, since the only other USB devices are my Microsft mouse and the MagicJack I know is a composite device, but I'm wrong.  AMD Athlon 64 3200 + 1GIG memory ATI Radeon X800XL 250gig W.D. hard drive

  An automatic Microsoft Windows update fixed my problem with this specific long ago PNY USB flash drive. It has been set at least the last 6 months or more.

• USB 3.0 flash drives doesn't work is not on the USB 2.0 in windows 7

  My kingston USB 3.0 does not no flash drives or supported on USB 2.0 in windows 7 and 'The window error' occurred: Windows found driver software for your device, but has encountered an error trying to install.

  Hi Faisal,.

  What is the brand and model of the computer?

  You will need installed USB 3.0 drivers on the manufacturer's Web site work with the USB 3.0 flash drives.

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  This problem occurs because the USB 3.0 device is not completely inserted in the port.

  The USB 3.0 supports the devices USB 1.0, 2.0 and 3.0. The first layer of pins inside the USB connector are for USB 1.0 and 2.0 ports. The second layer of pins inside the USB connector is USB 3.0 ports. Therefore, to resolve this problem, make sure that the USB 3.0 device is inserted in the port.

  Method 2:

  Uninstall and reinstall the USB drivers and check if it helps.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, run, type sysdm.cpl in the Open box and then click OK.

  (b) click on the Hardware tab.

  (c) click on the button Device Manager.

  (d) expand Bus USB controllers.

  (e) each device under the node Bus USB controllersright click and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  We know the results.

• Why can't I update my mid-2011 Macbook Air at El Capitan?

  I find that I am short of problems with the performance because I'm unable to update things like Safari because the latest version is not compatible with my operating system. Is it possible to upgrade my Macbook Air on OS X 10.7.5 mid-2011?

  Yes, it is possible.

  You can install OS X El Capitan 10.11.

  OS X El Capitan 10.11 system requirements

  https://support.Apple.com/kb/SP728?locale=en_US

  OS X El Capitan works better with 8 GB of RAM installed.

  Check the compatibility of the application

  http://roaringapps.com/apps

  How to upgrade?

  http://www.Apple.com/OSX/how-to-upgrade/

  Save the Mac before the upgrade.

  Best.

• Mid-2012, MacBook Air of random stop

  I tried to find a solution to more than a year. My MacBook air has been cutting randomly without warning.

  At first I thought it was overheating, so I installed Mac Fan Control and cranked up the fans, but it always stops around 60-70 ° C temperature of CPU, which should be good. The first three years, I owned the computer I never had a single problem and the fan never accelerated where she was audible 2 times.

  The error code in the log files is Cause of previous stop - 2, which I can't find a description of anywhere.

  I took the computer to the Genius Bar for a verification of the material, but the computer turns off as soon as they are trying to run the test. They wanted to change the logic board for $600 + then I said that I think about it.

  If anyone has experienced this? I can find no solution confirmed online and don't know if I have to replace the logic board or card IO first. When he died, it's like it lost power. Immediately turns off. It will not restart for at least 20 seconds, and if I turn on for a few minutes it turns off again before moving on to the screen. However, it will work perfectly sometimes for up to an hour or two.

  The computer was pampered life whole and never dropped or spilled on. Looking inside, it looks fine, but tbh I don't know what I would look for.

  If anyone has any ideas at all, I'd like to hear them. It's a mid 2012 Air i5 with 4 GB of RAM.

  EDIT: Also, I did the resets of SCM, this does not solve the problem.

  How the MBA does not work when you start mode safe?

  https://support.Apple.com/en-us/HT201262

  If you can, run an Apple Hardware Test:

  https://support.Apple.com/en-us/HT201257

  Note that an error free AHT is inconclusive.

  Check if there is any panic the kernel has registered.  If so, login and post it by these instructions:

  https://support.Apple.com/en-us/HT201753

  Ciao.

• Mid-14 MacBook air won't turn on

  Big trouble in China little...

  My MacBook air of 2014 lights.  When I plug it to the Magsafe, light amber, as if he were in charge - but I guess that's not.

  The story is a bit complex. My husband and I are cycling through China, and we are weeks to be in a city with an Apple store.  We took the quick train to Hong Kong for the weekend, a couple of weeks and I plugged my computer to load.  Later this weekend, when the battery was dead, I plugged in to charge, and he left a little.  That's when he started... Or stop from where appropriate.

  I took it to the Apple store in Hong Kong and they said it was probably the logic board.  For reasons of time, we have sent to a friend in Beijing who took it to an authorized service provider that works without problem, cleaned, charged for diagnosis, and they sent back.

  I'll be just my computer a few hours ago.  Press the power button to make sure that things would turn out, he did, so I jumped on the charger it and we went to dinner.  When we arrived back, he would not turn back on... and that is where we are.  I did everything that Apple said to do, including resetting the SMC.

  Thoughts? Questions? Advice?

  I would test with another charger if available.

  Ciao.

• 13 "mid 2012 macbook air affected by video artifacts, known problem?

  My macbook air is randomly video defects showing, screwed to the top of some parts of the screen, seems to be at the start, not so good once it heats up. It happens on the desktop, foxfire or in video games, that has happened before and after the update to el capitan. Sometimes the sections of the flash screen. Is this a known fault? is there maybe some some campaign to provide a repair? of course, my 3 years protection plan apple just expired

  I'm not aware of any program by Apple about the graphic problems with MBA.

  You can connect a monitor on the MBA and which could indicate if there is a problem of connecting GPU or display/display.

  An Apple Hardware Test could provide a clue:

  https://support.Apple.com/en-us/HT201257

  Note that AHT free error is not conclusive.

  The best option will be a date at a bar in engineering of Apple for a FREE evaluation.

  Ciao.

• Is it safe to buy SanDisk Ultra adapt USB 3.0 flash drive in all sizes for their part start?

  Hello

  I just read your incompatible experiences regarding the ability to boot from different readers of Sandsisk.

  To be more precise, is it safe to buy the discs above (North American model numbers):

  SDCZ43 - 016G - A46 - 16 GB

  SDCZ43 - 032G - A46 - 32 GB

  SDCZ43 - 064G - A46 - 64 GB

  SDCZ43 - 128G - A46 - 128 GB

  at the start of one of them.

  Under Windowss, you can use FAT, FAT32 for sizes 32GB or less, NTFS for 64 GB or more. Ok.

  I've always wondered how to do a 64GB or more large disk bootable under Linux or Mac OS X?

  Thanks for your clarification!

  SanDisk did not burst as the hard drives over the years.  Is there the sellers offering some of the old stock, no doubt.  There sellers of counterfeit discs, certainly.  Are there readers used sellers, certainly. Are there vendors selling readers and not allowing them to return if the buyer is unhappy, certainly.

  So, rather than worry about the model numbers, worry to buy from a reliable source, so if you have a problem you can return. Quickly & easily.  New SanDisk flash drives are all seen as removable Windows.   And Easy2Boot will make them bootable., even on the new UEFI systems, which should be more a problem starting model guarantees.

• Get 'a backup location not valid' when trying to image backup on 64GB Kingston flash drive system.

  I am running Windows 7 on a week old HP DV6-6c35dx. I formatted the drive in NTFS but still does not work. I bought the flash drive for this specific thing. Please help since I spent $100 on this flash drive. No matter what n any help is appreciated.

  UPDATE: I've been successful this morning to create a bootable USB key. Now, I know it's a stupid stupid question, but I still have more of 40GBs space on this flash drive. Now, can I use this as my weekly data backup? Or is it just stupid? I'm a newb as everyone can see.

  I appreciate the answers ive got so far on the first?

  Hello

  Did you change your computer?

  Method 1:

  I suggest you to see link and check.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost

  Method 2:

  The Image of the system information is located under this article:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-system-image

  For more information about backups, you can follow this article as well:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-programs-system-settings-and-files

  See also:

  Learn more about the system image backup

  http://blogs.technet.com/b/filecab/archive/2009/10/31/learn-more-about-system-image-backup.aspx

• 2013: MacBook Pro replacement motherboard or not

  Brain Trust,

  I need some advice here.

  I have a 2013 fully bridged on (500 GB SSD, 16 GB of RAM) MacBook Pro and the sound from the speakers awefully distorted.

  I did all the regular troubleshooting inclusing a clean installation of the operating system, applications 3rd party and the problem persists.

  The distortion is NOT dependent on volume, it is still there, as if the sound is cut at all levels.

  Now, the headset on the port is perfectly clean, so I think I have it narrowed down to the (material) built-in drivers for speakers. I went to the Genius bar and they agreed and recommend a motherboard replacement. Since I have a month left my Applecare, I could do it, but I hesitate. Professionally, I rely heavily on my machine on a daily basis, and I fear that a machine otherwise perfect with zero problems (other than the problem of speaker) will be messed up.

  What is your experience with a motherboard swap and what do you recommend I do? Live with the distortion and contemplate a great Macbook, or opt for repair until the warranty runs out. NB, I have a very old Macbook that I can use for the week or I'll have to miss my machine.

  I'll answer my own question:

  Do it! I had a fantastic experience! Not only was my main problem, distortion in speakers, correctly diagnosed and resolved, since engineering also saw a small white spot on my screen (who had been there forever), I also had a nine screen. Not only that, I got a new valve and bottom plate, so after 3 years of intensive use, my Macbook Pro looks like new again. Total costs under Apple care program: $0.

  It's really the only problem with Aplle MacBooks: my excuse to buy a new went through the window, this machine will last me a few years ago!