Satellite A200-1AE does not recognize the USB 2.0 flash drive

I have a problem because my satellite A200-1AE with Microsoft Vista does not recognize the USB 2.0 flash drive. He asks me a program/software!
The same USB works without problem on other computers with vista!

Someone knows what to do?

Advertisement

Hello

First of all, you must disconnect all USB devices and must remove the USB ports and controllers in the Device Manager.
After this procedure, you must restart the laptop. After a new restart the Vista operating system should recognize the USB ports and should reinstall USB drivers again.

Then you must update the Vista to the State! All fixes and patches must be installed. Please note that you will have to visit the MS Update site for all patches

Notes; MS has released a beta of Vista SP1. I installed it on my laptop and it has solved several problems.

Best regards

Tags: Toshiba

Similar Questions

  • Aspire One d255 does not recognize the usb connected external ssd drive

    I want to replace the original HDD 160 GB with a 120 GB Samsung ssd 750 evo but bios and win 10 does not recognize the ssd drive as an external drive connected via a usb connection, so I couldn't create an image of my internal hard drive.  Is there a way to clone my hard drive SSD, so I can exchange the disc later?  I need to update the bios, install a missing driver, etc. ?

    I used two different connections: one is a 2.5 "SATA case disc that I used with a disk 2.5" HARD and works very well with the HARD drive and the other is SATA/IDE connector combination with cables for SATA and power and none of these works.  I read in another forum during my research that the Aspire One d255 doesn't recognize any external SSD connected through a USB either.  Since my netbook has no data, and I had just a pure 10 Windows installed on his drive HARD internal, I removed the 160 GB HARD drive and replaced by a 120 GB SSD and installed another Windows own 10.  It worked and my system boots now in less than 20 seconds.   We can close this thread now since I now have a faster machine fully function.  Thank you!

  • Windows 7 does not recognize the Patriot 256 GB Flash Drive

    My work computer (Windows 7 OS) does not recognize my drive 256 GB Patriot Superperformance XT flash.  My computer (Windows 7) Alienware recognizes very well.  The computer does not recognize it makes a strange noise when I plug.  Is there a setting I need to change so that it is recognized?  I also have a 64G flash drive XT patriot who is recognized at the end of my work computer.

    Hello Chuck,

    Thanks for posting your query in Microsoft Community Forum.

    1. You did it any significant hardware or change software on the computer before this problem?
    2. Do you have an error message when it is not detected? If YES, what is the exact and complete error message that you receive?

    I understand that the USB device is not detected by your computer. The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

    Method 1:

    Please the fixit (s) following provided below. They will help you solve common problems related to devices, and USB ports.

    If method 1 does not work, try Method 2.

    Method 2:

    Remove and reinstall all USB controllers.

    1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    2. In the list of the categories of equipment, locate and expand Bus USB controllers.
    3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
    4. Restart the computer and let the USB controllers get reinstalled.
    5. Plug in the removable USB device and test to make sure that the problem is solved.

    If the problem persists, go to method 3.

    Method 3:

    This method will install the latest drivers from device to your USB device.

    1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
    2. Click find updates. When the scan finished, click optional review updates.
    3. Click the check box next to the update, and then click install updates.
    4. If you are prompted, read the license agreement, then click I agree.
    5. Follow the instructions on the screen to download and install updates.
    6. If you are prompted, restart your computer.

    More information: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

    Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  • Satellite A200-1CR does not recognize the module of RAM 2 GB

    Hello

    I have a problem with the extension of the RAM.
    I have the Satellite A200-1CR with 2 x 512 MB of RAM.

    Now, I bought 1 x 2 GB RAM (DDR2 PC2-5300 (667 MHz); PA3513S-1M2G) but the BIOS and Windows recognizes only 1 GB.
    When I add 1x512mo to the second slot, the system recognizes 1.5 GB of RAM.
    Where is the problem?

    What should I do to make it see 2 GB?

    Paula

    Hello

    I think the answer is very simple.
    Satellite A200-1CR can be upgraded up to 2 GB of RAM.
    This means that you can use max 1 GB of RAM in one slot
    You used 2 GB of RAM and this module does not seem to be compatible
    In my opinion if you want to use 2 GB of RAM then you can buy 2 x 1 GB RAM modules

    Welcome them

  • A220-1 satellite has 9 does not recognize the USB Flash drive 4 GB

    Hello

    I bought a new USB (attachment 4 GB) Flash drive.
    And I had a problem installing it.
    The same drive Flash was wel work with my friends laptop that has windows XP only.

    Someone of you can give me a solution for this problem.

    Concerning

    François kervevan

    Go to the nursery of the device and remove all USB Device Manager USB controllers and root hubs ports!
    Restart the laptop and after the new installation of USB port try to connect the USB 4 GB drive again.

    Good luck

    By the way; If you use Vista on your laptop, please update the last State and also install this patch:
    http://support.Microsoft.com/kb/941600/en-us

    Good bye

  • Satellite A110-294 does not recognize the wireless card

    Hello

    the question is:
    Why my Satellite A110-294 does not recognize the wireless card?

    I re - install Xp PRO with all the drivers.

    I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

    I don't understand, can you help me?

    Thank you
    André

    Hello

    To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

    You can find the latest driver for Atheros WLan here:
    http://APS2.toshiba-tro.de/WLAN/

    Just a question;
    You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
    The driver is missing, then the device must be marked with a yellow exclamation point

  • DreamColor LP2480zx does not recognize the USB for calibration

    Hello

    I have a DreamColor LP2480zx, which does not recognize the USB connection to the computer during calibration.  I have my eye HP connected through this monitor, so I know the connection and the cable is good and mouse, keyboard.  My setup is like this:

    Reference Dell 690 running 64 bit + Windows XP

    DreamColor LP2480zx

    Apple Cinema Display 23 "

    I bought the DreamColor used, and in all other respects, it seems to work very well.  The original owner didn't have it calibrated within a certain time, but said that having had no problem with the previous calibration.  I installed the last APS (version 2.0) and updated to the latest firmware.  These updates produces no change in recognition USB problem.

    The interesting thing is, I was able to calibrate the Apple Cinema Display, using the same configuration of connection (mouse, keyboard, and HP eye connected to the computer via the LP2480zx) APS was able to see the USB connection and this very well calibrated monitor.

    I had trouble with this problem for a few days.  I've looked around quite a bit online and found a few others who have this same problem, but I did not yet find someone who can point out a solution.  If anyone has had this same problem, or has heard of results that correct it, please let me know, because it's very frustrating.

    Thanks for any help

    Clay

    An update to my previous post, I realized a work around for this problem.

    Apparently, this problem has to do with the Dreamcolor screen and/or software APS do not like working with 64 bit systems.  I'm not saying that it is always the case, but I saw the other posts on this problem on 64-bit systems, and I spoke with two other people personally who told me that they also had the same problem, try to calibrate its Dreamcolor monitor when it was attached to a 64-bit system.  HP does not seem to be concerned about this problem, because they do not even recognize its existence, but since I'm far from being the first to report this problem, he's obviously not a one-time problem.

    My solution was this: I had connect the monitor to a regular running XP 32 bit system.  After I did, I could re - calibrate the monitor without the problem of USB connection.  This isn't a very good solution because not everyone has access to several machines, running different operating systems.  But it's a work around, and it worked for me.

    Hope this helps other people who have this same problem with their Dreamcolor monitors hooked to their 64-bit systems.

    Clay

    PS- I posted this as resolved, only because I was able to calibrate my monitor.  It's not really solved the problem, but it gets the monitor working again.  Maybe HP will address this problem in the future, but I'm not holding my breath.

  • Lite-On ENAU108 CD Burner IT does not recognize the USB key

    Windows Media Player does not recognize the USB drive letter

    Although the Windows Device Manager recognizes it.

    I want to add drive from the device to WMP

    Hello

    1. have you made any hardware changes or software on the computer before this problem?

    2 - is the USB key in Windows Explorer?

    3. you try to transfer music files from the USB key?

    4. what version of Windows Media Player do you use?

    If you use Windows Media Player 11 & try to add media files in Windows Media Player, you can follow these steps.

    a. open the Windows Media Player, click on organize > manage libraries > music.

    b. click Add and navigate to the location where the file is stored in the Windows Explorer.


    Reference:
    Add items to the Windows Media Player library

    Hope the helps of information.
    Please post back and we do know.

  • For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

    My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

    My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

    When did this problem start? What did you change shortly before it all began?

    Please quote the exact text of the message you get, verbatim.

  • Win 7 Backup and Restore does not recognize the USB flash drives.

    Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

    Back up and restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    You can't save backups to a flash drive, you need an external USB hard drive.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Laptop does not recognize the usb mouse or the internal speakers.

    The laptop does not recognize the USB mouse. I have re installed the drivers from the site of the constructor (HP), but it still does not work.

    In addition, the internal Laptop speakers no longer work. There is no sound coming out of the laptop and it does not recognize the external headphones plugged into the headphone jack.

    I ran several troubleshooting utilities (audio playback, FixIt) and they are no help.

    Hello

    Thank you for keeping us posted.

    Sorry for the late reply.

    I imagine the inconvenience that you are experiencing. However, I appreciate your efforts to resolve the issue.

    I would suggest trying the following methods and check if it helps.

    Method 1:

    How to use the tool File Checker system to repair missing or corrupted system files,

    Please follow the steps in the link provided below.

    https://support.Microsoft.com/kb/929833?WA=wsignin1.0

    Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how to run the system (SFC.exe) to File Checker tool analyzes your system files and to repair the system missing or corrupt files in Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

    If the problem persists, follow method 2

    Method 2:

    Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft, security scanner please follow the steps in the link provided below.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.   

         

    If the problem persists, follow method 3

    Method 3:

    I suggest you try the steps from the following link and check if it works.

    No sound in Windows.

    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    For the problem with the USB mouse, there could be a possibility that there is a conflict of material with the mouse.

    I suggest you to try some other USB mouse with the laptop and check if it works.

    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

  • Satellite 1900 (PS192E) - does not recognize the CD/DVD

    Hey all,.

    I just bought a Toshiba Satellite 1900 (PS192E) and place an old 20 GB HDD from an old laptop.

    When I boot, the screen is in VGA 16 color mode, it recognizes the DVD player, but does not recognize the CD/DVD when inserted. I tried to install and run the utility "driver robot" Toshibas, but the display is such that I see all of the screen to start the search.

    If there is someone out there who could give me some advice, I would be extremely grateful.

    Thank you very much

    James

    Hello

    OK, you have installed the disk HARD of another laptop but too format the HARD drive? I mean if the HARD drive performed from another laptop, you need to reinstall Windows because now you have other hardware installed.
    What version of Windows is it?

    If you want to install a driver for the graphics card go into Device Manager and select Update driver.

  • Satellite Pro 6100 does not recognize the single battery external power

    Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

    By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

    I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
    Any ideas?
    Concerning
    Phil

    Hello

    Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
    In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
    The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

  • Satellite L30-105 does not recognize the 1 GB of additional RAM

    Hi there I hope someone can help me

    I have a Satellite L30-105 PSL33E, which came with 1 GB of ram installed (2 x 512 MB made by TeamViewer)
    and it's terribly slow with vista, not to mention programs.
    The toshiba website says max RAM is 2 GB, so I bought a Kingston 1 GB ram chip to increase the ram to 1.5 GB. I thought should try before moving to 2 GB

    However after installing memory vivid it's show still only 1 GB in windows and in the bios (894 + the rest for video). It has the latest available BIOS on the site 3.10, yet still does not recognize the chip.

    The chip is installed in the lower slot, including the original 512 at the top (closest to the keyboard)

    Are limited to only some of the Satellite of RAM?
    The old subjects indicate if kingston does not work try corsair.
    Other topics suggested to change slots
    Others suggest that it may have only two of the same ram chips in IE 2 x 512 or 2 x 1 GB, you may not have 1 of each

    Can anyone help? everyone knows about similar problems?

    I will not buy any more RAM to try different brands for the same issue to occur

    Hello

    The L30-105 is able to manage the 1024Mo modules in each location it should be able to update the RAM up to 2 GB.

    > Why the RAM 1 GB module cannot be recognized?
    Perhaps the two modules are not compatible with each other
    I would recommend using two identical modules of the same manufacturing
    I use Kingston modules, they are ok for me

  • Windows 7 64 bit does not recognize the USB external drive HARD Stor E art 3.5 "

    I buy the art external disk HARD Stor E 3.5 "and spend a few days in windows does not recognize the HARD drive. Try to connect the drive to other USB 2 ports and nothing happens. Use a USB to see if has been a problem with the USB ports, but all 3 are OK. Try it on the laptop Asus and windows 7 recognizes the HARD disk. I formatted the drive in NTFS FS. In managing records do not show the external HARD disk. What can I do to fix this?

    My laptop is a Qosmio F60

    This is a really silly situation. It can be recognized by other laptops but not your Qosmio.
    According to the description of your HARD drive when connected simply doesn t exist for your Qosmio laptop.

    Some other HDD is recognized correctly?
    What you can try is to reinstall the chipset driver, restart the laptop and test it again.

    Since when you have this problem? Some installed updates of the last days?

Maybe you are looking for