Pavilion DV8 wants to check the integrity of the disk at startup

Similar Questions

• I want to monitor the disk space and CPU on a windows - DONT see machine

  I want to check the disk space and CPU on windows server 2003 box - DON'T see pltform for windows box all 'fileserver mount' or 'CPU '.  I do not see these services
  for my UNIX/LINUX platforms. What controls what in health platform services, and WHY doesn't show the windows platform the platform services. I have Server 3.02
  talk to the windows client running 3.02 box. I just reinstalled the client on windows
  box and still the same. Nothing in the health platformservices). I restart the HQ server and its
  client also. NOT knowing how to manage the windows box. I can go in manually and add an assembly file server service and name it and then this name appears in the services of the platform
  health. I shouldn't this for CPU, NetworkServer or mount fileserver interface. ???  I talked to John Mark Walker and is well why this is happening?

  I'm not an expert but I have encountered this problem also.  That's why I think it happened to me.

  1. I installed the server and checked it was running and I was able to connect to Headquarters.
  2. I installed my agent on another box and as soon as he said it started successfully killed him so that I could go ahead with the installation of the agent as a service.
  3. I installed the agent as a service and started it.
  4. this particular agent in central administration did not show one of the hard disks or WIN32.

  I fixed it by deleting the agent and put it back.  After you start the agent for the first time and it communicates with the server let it run for a while before you kill to install as a service.

  1. stop the service of the agent on the windows machine
  2. open your command line, change to your agents directory and run hq-agent you to uninstall as service
  3 remove the data of your agent directory folder
  4. use the download of SERVER installation to install your agent
  a. by running setup.bat - full (option 3 for the installation of the agent)
  5 finish the installation of the agent so that your window says 'agent started successfully.
  6. DO NOT CLOSE THIS WINDOW
  7. connect to your HQ and accept your inventory of auto-discovery, access this resource, and you should see that it is only partially completed
  8. Refresh every few minutes and you should see all the icons of availability to change green checks and your additional question as disks and CPU added.
  9. once filled close your agent, install it as a service, and then start it again.

  I was killing my initial discovery officer before he could finish, looks like you have the same symptoms.

• Why my ipod touch 5 turn on she used that happened last night I went on netflix for like 20 minutes then I closed it and then I'm gone on it again 5 minutes later, he worked later I hung on it and then I just wanted to check the time and it dint work

  I went to netflix for like 20 minutes, and then I closed and then I'm gone on it again 5 minutes later, he worked later I hung up it and then I just wanted to check the time and it dint work I can't see the screen I have tried pressing the home button and the stopcock one its does not work how to fix it

  Try:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• P7-1234 Pavilion: I have a p7-1234 Pavilion and want to upgrade the video card.

  I have a p7-1234 Pavilion and want to upgrade the video card. I am currently the EVGA GeForce GT 610 2048 MB GDDR3. This card will work with it?

  This is a power supply that will work for you:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139048

  It is modular allowing you to use only the necessary cables.  This means that there is more room inside the circulation of air.  He is also a 600W which will give you extra power for the possible future upgrades.  Any block of power SUPPLY Corsair will be good.  They are fans of the quality products for a reasonable price.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. an error message will appear saying "need help."

  I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. a pop error message saying "we met the following problems Installer failed to initialize. "Please download Adobe Support Advisor to detect the problem" I click on 'Get Adobe Support Advisor' and then I get here. Can you help me? I use the Mac operating system. I also run Adobe Photoshop CS6 unistall and cleaner, but now when I try to install it again it gives the same message

  Hi Ashish,

  Please follow the solution 2 in the link below.

  Error: "unable to install". Creative cloud office

  After that, you can install the application by following the instructions on the link below.

  Download and install Adobe Creative Cloud apps

  Hope this will solve your problem.

  Kind regards

  Hervé Khare

• Is there a fault with upgrade 2.13.121 for the interface Adobe Creative Cloud? I want to check the updates of the program and update freezes at 5% - I have now tried 6 to 8 times to + 5 min once - it's over half an hour of my life!

  Is there a fault with upgrade 2.13.121 for the interface Adobe Creative Cloud? I want to check the updates of the program and update freezes at 5% - I have now tried 6 to 8 times to + 5 min once - it's over half an hour of my life!

  Hi David,

  Please check the help below document:

  https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.html

  Kind regards

  Sheena

• Check the disk for consistency

  I read messages will this question hide two to five years. I guess my problem is the same: black screen on startup with white 'BACK', writes, "one of your disks needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue. Windows will now check the disk. "What has happened three times in the last two months, and nothing was found in the mess at the end of the audit.

  Responses to previous posts are frankly discouraging - at least for me. I want to know is if this disk check is a signal that all is not well with the computer, or if it's just a gene that will probably calm down. Would it not be in my interest to call a repairman? I'm not interested in venturing into the only registry.

  Thank you.

  There is nothing remarkable or unusual in the chkdsk report, no bad sectors or the reported bad clusters.  Run the utility of diagnosis of the constructor on the drive and see if it reports disk problems, go to the web site of the manufacturer of the drive for the utility.

  John

• I was using my MacBook today and it crashed and the dock turned silv, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock turned

  I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
  OS El Capitan

  This can help:

  Reboot safe mode (it is a slow process):

  -stop of the mac

  -Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go

  -When everything started, connect

  -Once connected, stop the mac once again, nothing else is necessary.

  -restart normally.

  Lex

  PS: This clears all system caches.

• Solutions error checking the disk and Restore Point, pointing to the other.

  Yesterday, my wife picked up the package of virus Security Suite from somewhere and remove, I picked up an error when the disk check runs at startup. Check disk claims it is an error, check the drive and suggests restore since my last restore point. But when I do this, restore the system claims I have a disk error and I need to run the disk check. Which brings me right to the beginning of this problem.

  I'm running 32-bit Windows 7 Home Premium, and have enabled the Windows updates. I use AVG and Malware Bytes to protect my system.

  Thank you!

  Bill Haworth

  You can run check disk from safe mode? This is a level of command prompt:
   
  CHKDSK x: /F /R
   
  Where x: is the drive that you control.
   
  "bill_haworth" wrote in message news: 9c836e2b-b164-44a7-b516-5d5302cca9bf...
  > Yesterday, my wife picked up the package of Security Suite virus from
  > somewhere and back, I picked up an error when running the disk check to
  > start. Check the disk says there is an error, check the drive and
  > suggests restore since my last restore point. But when I do
  >, System Restore claims I have a disk error and I need to run
  > Check the disc. Which brings me right to the beginning of this problem.
  >
  > I am running 32-bit Windows 7 Home Premium, and made Windows updates
  > on. I use AVG and Malware Bytes to protect my system.
  >
  >
  >
  > Thank you!
  >
  > Bill Haworth
  >
   
   

• Check the disk recovery image it is stuck at 56%

  I created the Recovery Manager recovery discs and the process stopped at 56% when checking the image of a disk after you create it! I let it sit for more than an hour and he sits up to 56%!  I was wondering should I cancel the process or wait and so if she does not change and I have to cancel I will be able to restart the process or is this my only chance presence it say that you cannot create more than one set of recovery discs!

  my computer is a HP Pavilion dv6 notebook pc windows 7 Home premium 64-bit

  Usually, if the process does not properly complete, you can start no later than. HP can even send a free statement if you tell them that your software is unable to create the whole. Access to worldwide here contact information >

  Contact HP

• Check the disk stopped running

  I have a disk check run on my computer after the startup. He stopped at 41% full and seemed to be frozen. I turned off the computer and when I turned it on again, he went to the disk check automatically and is stuck at 41% again. I really just want this disk check. I'm sorry that I tried to do a few "maintenance".

  If the memories are good, you can cancel the disk check if you press a key within 10 seconds after the message that the disk check is scheduled appears on the screen. However, the fact that the system blocks on the disk check can be alarming.
  Check if there is no disk activity hard while the disk check is stuck at 41% (check the HDD LED or any Visual indicator on your box), check if you can hear the work of the disc. Finally, give him time (even an hour or two). Depending on the amount of data and errors do you repair process may take some time.

• Check the disk with Vista Home Premium

  I'm doing a disk check on my C drive with windows Vista, Home Premium, ed. I get to the point where it asks if I want to plan the audit to the next time I start the machine. But when I check that, close and restart, nothing seems to happen that my normal startup. Why is it not showing me that a disk check is happening or why it's starting the disk check? Thank you.

  Have you tested the hard drive itself with the maufacturer of hard disk diagnostic utilities?

  `~`

  The current time and the date now in Oregon, United States

  15:33
  Sunday, July 7, 2013
  The time Pacific daylight time (PDT)-0700 UTC
   
  UTC/GMT is 22:33 Sunday, July 7, 2013
              
  Current weather conditions in Portland

  Cloudy67 ° F / 19 ° C

• Win Vista: Restoration of the window tells me that there may be errors on the disk, check the disk fails or the other.

  Restoration of tell me that there are errors on the disc that allows the utility disk check, who then told me that it won't work while Windows is running and asks if I want the calendar for the next restart of Windows, I have check the Yes box and try to fix the errors. When I restart or turn off and on, nothing happens. It restarts normally.
  I wanted to restore it's because my laptop (dell inpiron 1525) is not hibernating or sleep I noticed after installing the updated drivers from dell. When I went to use the sys restore is when I noticed what is happening now.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  --
  ..
  --
  "spaz12" wrote in message news: 9fff9795-78 c 0 - 4A 41-9652-a30919d15ea2...
  > Restore tell me that there are errors on the disc which shows the disc
  > launch utility, who then told me that it won't work so that Windows is check
  If I want to schedule for next time window
  > restarts, I check the Yes box and try to fix the errors. When I restart or turn
  > and now turn it on, nothing happens. It restarts normally.
  > I want to restore it's because my laptop (dell inpiron 1525) is not
  > hibernation or sleep I noticed after installing the updated drivers
  > from dell. When I went to use the sys restore is when I noticed what is
  > right now.
  >

• Cannot run the disk error check: check the disk has been disabled by a program use system restore.

  Title: How re - enable disk check after it has been disabled?

  I used a registry repair whichremoved all system restore and disabled of the disk check points. How do I re active chkdsk as he wants me to restore which I can't?

  I used the free registry repair recommended by c-net

  original title: re enable check disk

  Hello

  Follow the steps mentioned below and check if the problem persists.
  File system (CFS) Checker
  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
  To run the System File Checker tool, follow these steps:
  (a) click Startand type cmd in the box start the search.
  (b) click on cmd in the list programs, and then click run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  (c) at the command prompt, the following line and then press ENTER:
  sfc/scannow
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?
  http://support.Microsoft.com/kb/929833
   
  Hope this information helps.

• Check the disk continues to run when I turn on my computer

  Whenever I turn on my computer. Check the disc is still running. I have let it run before and I restart my computer and it works again. When I let the program run, he never finds anything and it's getting boring. Can anyone?

  Whenever I turn on my computer. Check the disc is still running. I have let it run before and I restart my computer and it works again. When I let the program run, he never finds anything and it's getting boring. Can anyone?

  1. click on the start menu and open the Run dialog box.

  2. Type "cmd" and back (Note: don't enter quotation marks)

  3. then type "fsutil dirty query c:."

  4. If the returned message indicates that the volume is dirty, proceed to step 5

  5. then type "chkdsk c:/f/x.

  6. after that finshes repeat step 3.

  7. If it is no longer dirty then reboot and the problem should be solved.

  If you continue to receive the drive guest check after completing the above steps follow the instructions HERE