Similar Questions

• I want to see the VM configuration files

  Hello

  I want to see the VM configuration files. Can you explain it please with screenshots.

  Kind regards

  DJ

  Hello

  The links provided of Andrew are good and explains a lot of things and hope that the below a will also help more...

  If you want to display your virtual machine using GUI Configuration files, and then follow the steps below

  1. connect to your customer VI or Vcenter and identify the virtual machine that you want to display the Configuration of the 'Search' tab in the right-hand

  2. When you have found the right VM, go to the settings and find on what data store, it is present and go to these data, store and right click on that and select Browse the data store

  3. Select the folder with the name corresponding to your virtual machine name, and you will be able to find all the files that you see in the attached picture.

  If you want to display your virtual machine by using the CLI Configuration files, and then follow the steps below

  1. connect to ESX using the Console used in your environment (for example: Putty) with your root and PW id (or your existing access)

  2. Once you log in, go to "cd/vmfs/volumes" (commonly used way... can also vary)

  3. as you know from the data store, type 'cd datastorename' and you have the list of virtual machines that you had in the GUI, and then select the virtual machine using the same "vmname cd.

  4. Once you're in the virtual machine, use the ls command and you can view all the files in it

  5. If you need more information on ls you can use the link below

  http://www.computerhope.com/UNIX/ULS.htm

  Hope 2 modes above helps you to better...

  Chavigny$ $$

  "Life is boring without challenges & risks taken in daily life.

• an impact on the passage of the Broker Configuration files

  Hello
  
  I have setup a datagaurd for my RAC - ASM production database.
  The backup database is on ASM and RAC
  but now I have this error
  ORA-16637: an instance could not access the Data Guard broker configuration
  
  I realized that the
  DG_BROKER_CONFIG_FILE1
  DG_BROKER_CONFIG_FILE1
  point to a file on the file system.
  I realized that I need to stop the broker and move the files to the location of the ASM so both my production instance sees the same broker configuration file.
  
  But now I want to know if by stopping the process broker and move the files to another location and begin the process of broker, will be this aything affect with dataguard Setup.
  in other words, moving the broker configuration files, am I break anything with installing dataguard.
  do I have to re - configure the installer of all datagaurd by moving the files to the broker.
  
  Thanks in advance.

  No, it will leave the current parameters of work and then when it starts up again once he sees that everything is just as it should. Simply not make a move to the middle.

  If you are worried, you can always drop configuration broker preserving destinations, stop the broker, move files, and re-enable the broker and re-create the configuration but I think it's exaggerated.

  Larry

• What do the following entries in the following configuration file?

  What do the following entries in the following configuration file?
  Thank you
  < include > coherence-pof - config.xml < / include >
  < allow-interfaces > true < / allow interfaces >
  true < subclasses allow > < / subclasses allow >
  

  <?xml version="1.0"?>
  <!DOCTYPE pof-config SYSTEM "pof-config.dtd">
  <pof-config>
  <user-type-list>
  <!-- coherence POF user types -->
  <include>coherence-pof-config.xml</include>
  <!-- com.tangosol.examples package -->
  ...
  <allow-interfaces>true</allow-interfaces>
  <allow-subclasses>true</allow-subclasses>
  </pof-config>

  -L' allow-interfaces to indicate if the class name of the type of user can specify types of Java interface in addition to the Java classes. Valid values are "true" or "false". Default value is false.

  -L' allow-sub-classes element indicates if the user-name of the class type can specify a type of Java class which is abstract, and whether subclasses of any type of user specified name of the class will be allowed during execution and automatically map to the super class specified for a serializer. Valid values are "true" or "false". Default value is false.

  -L' user-type-list element contains zero or more elements of type of consumer. Each type of user POF that is used must be included in the list-type-user. The item of list-type - the user can also contain zero or more include items. Each includes element is used to add items of type user defined in another pof-config file.

  The include element specifies the location of a pof-config file to load items of type user of. The value is a string of locator (URL or a valid path) that identifies the location of the target pof-config file.

  http://wiki.tangosol.com/display/COH35UG/user-type-list

  http://wiki.tangosol.com/display/COH35UG/POF-config

  Thank you

  Everett Williams
  Team coherence

• Cannot deploy when you use the FPGA configuration file

  Hi all

  I'm new to NI Veristand. We use a controller NIPXI 8108 with a map of FPGA OR 7841R. Is the used chassis OR PXI 1042 q. VeriStand does not deploy, when we try to add the target FPGA. For adding, we used the default for NOR 7841R provided with veristand FPGA configuration file. The error is attached! Without adding the FPGA target, we are able to deploy.

  We programmed with LabVIEW FPGA card and it works.

  Please help us!

  Thank you

  SID

  Hi Sid

  This is because the FPGA card is not connected through the chassis

  Right click on the (unidentified) PXI system and identify as PXI 1042 q.

  Right-click on the PXI-1042 q system and identify the PXI-8108 controller.

  Then it will automatically fill the devices under the controller

  Now try to deploy again. It will work

  -SID

• Could not get configuration "archive folder" in the Panel "configuration files".

  I'm glad Oracle server v 11.1.1.6, I tried to archive files and documents, but was unable to find the "set up archiving of file" option in the menu "configuration of the folder. Please tell me how to archive documents?

  Hello

  You have the FolderStructureArchive enabled on the server component? If not, then turn it back on, restart the server of the University Complutense of Madrid and test. The menu option would come as a separate after the Configuration of the files.

  I hope this helps.

  Thank you

  Srinath

• Oblix_OBWebGate_AuthnAndAuthz:... - cannot read the log configuration file.

  Hi all

  I have a painful problem with Oracle 10 g Webgate. I use Oracle_Access_Manager10_1_4_3_0_linux64_APACHE22_WebGate to procted resource Apache. I have a custom authentication plugin problem. is not yet resolved (https://forums.oracle.com/thread/2549716).

  Now I apply patch BP9 for Webgate (Oracle_Access_Manager10_1_4_3_0_BP09_Patch_linux64_APACHE22_WebGate), now I have a new problem, I am unable to get the OAM login page when trying to access my resources to Apache.

  The Error Message in the browser is:

  Internal server error

  The server has encountered an internal error or misconfiguration and was unable to respond to your request.

  Please contact the server administrator, root@localhost and inform them of the time the error occurred and anything you might have done that may have caused the error.

  More information about this error may be available in the server error log.

  Apache/2.2.3 (Oracle) Server at apache.tigerit.com Port 80
  In the error log file of  Apache I have found

  [Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:20 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

   

   

  Can Anyone help me regarding this issue...

   

  Thanks

  Tamim Khan

• SUPPORT of the OBSOLETE MEASURES in the TNA configuration file

  Hi all
  
  I want to make OBSOLETE SUPPORT measures = "YES" parameter in the configuration file of TNA. I couldn't find this setting in the file. I have to add this statement in the file? If so, where should I add this statement in the configuration file of TNA. I use version 11.1.1.6.0 obiee. I'm putting this statement so that I can aggregate the logical derived column.
  
  Thank you
  
  Surya

  You must add SUPPORT_OBSOLETE_MEASURES = YES; the article in general, manually. Its framework not like NO to YES.

  Score pls correct/good

• migrate the NAS device file system

  Current config: host CentOS; Ubuntu Vm; VMWareServer.

  I'm migrating file systems of a number of Ubuntu VM running on a host of CentOS to a NAS device which is mounted via NFS.  I am running VMWare Server (64-bit)

  Current configuration:

  Release of centOS 5.2 (Final)

  Ununtu VM: 2.6.18 - 92.1.18.el5 #1 SMP Wed Nov 12 09:19:49 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux

  I see some contradictory information, so I would appreciate an idea if you have a similar project.

  Thank you.

  will136 wrote:

  Can I use rsync to copy the virtual host to the NAS disk or do I have to use the vmkfstools command?

  Any guest arrested or Hibernate mode can be reproduced by any tool you like (rsync, unison, cp, mv, no matter).

  No risk of problems with disc ID / Grub?   How do I point to the new location of the virtual disk?

  You didn't play something with raw devices? Haven't you? If this is not the case, the 'virtual' disk is only one (the) (*.vmdk) file that is moved/copied to the new location. Which does not affect its content, nor that it does not change the disk IDS.

  There could be problems with ISO attached hard coded paths for CD/DVD. They can be set by editing the appropriate *.vmx or using the WebGUI of Server 2 for this guest (guest physical or ISO settings based on CD/DVD).

  Is the same for drives, if you specify special data store options, the *.vmx expect to find his 'virtual' disk in the same place as the *.vmx.

  To be sure, take a look inside the appropriate *.vmx (open with a text editor).

• How can I migrate the Juno client files to Thunderbird?

  Years, I have used Juno client applications, dating back perhaps to their debut.

  Of course, they went from "shapefiles" strictly ASCII in this boring BDBish format.

  I have juno5bdb, but don't know what output format they use is compatible with the current "Bird and could not find an import feature in ' bird to complete the process."

  Juno is not a facility to freely transfer things between the client and webmail, so the recent solution you have for someone who wants to migrate its former webmail messages does not apply to me.

  I hesitate to use Thunderbird, until I can look at my Juno-client messages in it, but I'm afraid I'll have to pass each and every message stored, that would take time to helluvalong and where there is no way for me to go back.

  Thunderbird uses the mbox mail storage format.
  You can use this module to import mbox files.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

• Can not build waterfalls sample application: can not find the qmake configuration file

  When you try to build a sample application stunts for debugging on the PlayBook, I have some errors in the output.

  I am running Windows 7 (64 bit) using the QNX Momentics IDE.

  Here is the result:

  ----------------------------------------------------------------

  Build the unit for project HelloCascades debug configuration *.

  make the device debugging
  C:/SDK/BB10/host/win32/x86\usr\bin\qmake-spec unsupported\blackberry armv7le-g ++ o arm\Makefile device += HelloCascades.pro CONFIG
  WARNING: Did not find:... / SRC/.h
  WARNING: Did not find:... / SRC/.h
  X-unsupported\blackberry-C:/SDK/BB10/host/win32/x86\usr\bin\qmake-spec 86-g ++ o x86\Makefile simulator += HelloCascades.pro CONFIG
  WARNING: Did not find:... / SRC/.h
  WARNING: Did not find:... / SRC/.h
  make - C. / translations f Makefile update release
  make [1]: Entering directory "C: / SDK/BB10/Apps/translations
  C:/SDK/BB10/host/win32 / x 86/usr/bin/lupdate HelloCascades.pro
  Update 'HelloCascades_en_GB.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades_fr.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades_it.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades_de.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades_es.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  C:/SDK/BB10/host/win32 / x 86/usr/bin/lrelease HelloCascades.pro
  Not found in directory name racineLe qmake configuration is not valid.
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_en_GB.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_fr.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_it.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_de.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_es.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  make [1]: leaving directory ' C: / SDK/BB10/Apps/translations.
  make - c / arm f Makefile debugging
  make [1]: Entering directory "" C: / SDK/BB10/Apps/arm ' "
  do f Makefile.Debug
  make [2]: Entering directory "" C: / SDK/BB10/Apps/arm ' "
  Not find qmake configuration not found directoryCould extended fichierExemple of use OS qmake configuration before you define MAKEFILE_GENERATOR/usr/bin/sh: C:/Users/ROSSL~1/AppData/Local/Temp/make4028-1.sh: no such file or directory
  make [2]: * [o.le - v7-g/HelloCascades] error 127
  make [2]: leaving directory ' C: / SDK/BB10/Apps/arm.
  make [1]: * [debug] error 2
  make [1]: leaving directory ' C: / SDK/BB10/Apps/arm.
  make: * [Device-Debug] error 2

  Build completed *.

  I have bolded the output where I think the problem might be involved.  Is there a problem with the Makefile, or is it a directory I'm missing, or anything else?  I can't see why there is an error while compling.

  Thanks for any help.

  I have the same warnings qmake... is not found . But finally, after that I could successfully implement the objective of the Simulator, the sample application running, even with this qmake warnings.

• Impossible to migrate the application through file system artifacts

  Hi all
  
  Exported application artifacts in the development environment cannot be imported into the production environment. The file in the directory what can not be read by shared production Services.
  The user exists and is intended for the application.
  
  Thanks a lot for your help.
  
  Ilias

  We had to change the permissions of the file of database objects (with the extension .rul, .csc, .rep) for them being migrated on another environment (initially our group is missing permissions on these files).

  Bravo!

• Cannot find the corrupt configuration file to be recovered.

  I had a similar problem to many people, with my computer telling me that the windows\system32\config\system file is corrupted missing. But after trying the steps on the support page, I got no further than the first step that the files that I need to copy could not be found. I tried to jump to their compensation, but, yet again, as they cannot be found, they cannot be repaired! Don't know what else to try as no command doesn't seem to work with anything whatever in the config folder. Then, try the system restore, but don't even know if it's likely to work?

  Any help would be greatly appreciated!

  The problem is usually a corrupted file system and not a damaged or missing file.  The message means that XP tries to start, but just can't find or get the file.  A chkdsk /r usually clears it right up, but when the mistake of Googling, KB307545 is the first results, so unfortunately, it's where people start sometimes.  KB307545 is a corrupted registry or a file system afflicted.  If the file system is corrupted, you will get frustrated quickly with KB307545.

  KB307545 doesn't really work if you follow the directions exactly and you do not have a problem of file system, but I've never, never, never used to solve the problem you describe because it is usually never really necessary.  Recording file corruption does not usually go to the origin of the error.

  If you want to use KB307545, which is something you would do to get your whole system running long enough to make a 'real' system restore, but only after running a chkdsk/r from the Recovery Console.  There is no such thing as a "restoration of the manual system.  There is a "get my system functional enough to do a regular system restore".  KB307545 and a regular system restore are not interchangeable.  It could also be that your system restore is just totally whacked on too much by train.

  What happens when you try to start your system in Mode safe?  What is the last thing you see on the screen?

  What does ' not loading everything '?

  If you use the Recovery Console to implement the KB307545 and have already tried, name changes will not work until you remove the files target of your previous efforts.

  If you want to rename fileA to fileB, you must first remove the current file (if it exists).  Change of name is not identical to the copy so if the target file already exists, you cannot rename just another file on top of it.  You will get an error message.  You will need to delete the old file first, and then rename.  That is why your worked the first time but not the second time - the file you are trying to rename already exists.  You cannot rename on top of an existing file.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• 11.1.2.3 several node install, do not use a shared location for the HTTP configuration files

  I'm done, the better I have a server three install of 11.1.2.3; Foundation Server the R & A, EPMA, Essbase tools, workspace, a single server Essbase and Planning server.  I haven't used a ' sharedlocation (Advanced link in screen HTTP) for servers.  My question is; "What needs to be done to complete the configuration, as the Administration of planning does not appear in the workspace?"  It is possible to re - configure HTTP to a 'sharedLocation' once the installation and configuration tasks are made?

  Thank you

  You can configure the location of OSH shared anytime

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Limits in the Instance configuration file change after restart (sometimes)

  Hi Experts,
  
  Here, I have a problem.
  
  The limits of configuration change to the original boundaries after restarting the server
  
  Ex: Initial account limit: < DefaultRowsDisplayedInDelivery > 75 < / DefaultRowsDisplayedInDelivery >
  
  I changed to < DefaultRowsDisplayedInDelivery > 1500 < / DefaultRowsDisplayedInDelivery >
  
  After reboot, sometimes the configuration evolves at the initial stage
  
  < DefaultRowsDisplayedInDelivery > 75 < / DefaultRowsDisplayedInDelivery >
  
  The same download limit as change < DefaultRowsDisplayedInDownload > 2500 < / DefaultRowsDisplayedInDownload > 2500 initial value
  
  Can someone help me in regardin this?
  
  Kind regards
  Angelique
  
  Published by: angelique on 23 January 2013 05:21
  
  Published by: angelique on 23 January 2013 05:22

  Use Enterprise Manager to update configuration settings DefaultRowsDisplayedInDelivery and DefaultRowsDisplayedInDownload for Table and Pivot views.

  If brand pls help