Similar Questions

• I want to see the VM configuration files

  Hello

  I want to see the VM configuration files. Can you explain it please with screenshots.

  Kind regards

  DJ

  Hello

  The links provided of Andrew are good and explains a lot of things and hope that the below a will also help more...

  If you want to display your virtual machine using GUI Configuration files, and then follow the steps below

  1. connect to your customer VI or Vcenter and identify the virtual machine that you want to display the Configuration of the 'Search' tab in the right-hand

  2. When you have found the right VM, go to the settings and find on what data store, it is present and go to these data, store and right click on that and select Browse the data store

  3. Select the folder with the name corresponding to your virtual machine name, and you will be able to find all the files that you see in the attached picture.

  If you want to display your virtual machine by using the CLI Configuration files, and then follow the steps below

  1. connect to ESX using the Console used in your environment (for example: Putty) with your root and PW id (or your existing access)

  2. Once you log in, go to "cd/vmfs/volumes" (commonly used way... can also vary)

  3. as you know from the data store, type 'cd datastorename' and you have the list of virtual machines that you had in the GUI, and then select the virtual machine using the same "vmname cd.

  4. Once you're in the virtual machine, use the ls command and you can view all the files in it

  5. If you need more information on ls you can use the link below

  http://www.computerhope.com/UNIX/ULS.htm

  Hope 2 modes above helps you to better...

  Chavigny$ $$

  "Life is boring without challenges & risks taken in daily life.

• an impact on the passage of the Broker Configuration files

  Hello
  
  I have setup a datagaurd for my RAC - ASM production database.
  The backup database is on ASM and RAC
  but now I have this error
  ORA-16637: an instance could not access the Data Guard broker configuration
  
  I realized that the
  DG_BROKER_CONFIG_FILE1
  DG_BROKER_CONFIG_FILE1
  point to a file on the file system.
  I realized that I need to stop the broker and move the files to the location of the ASM so both my production instance sees the same broker configuration file.
  
  But now I want to know if by stopping the process broker and move the files to another location and begin the process of broker, will be this aything affect with dataguard Setup.
  in other words, moving the broker configuration files, am I break anything with installing dataguard.
  do I have to re - configure the installer of all datagaurd by moving the files to the broker.
  
  Thanks in advance.

  No, it will leave the current parameters of work and then when it starts up again once he sees that everything is just as it should. Simply not make a move to the middle.

  If you are worried, you can always drop configuration broker preserving destinations, stop the broker, move files, and re-enable the broker and re-create the configuration but I think it's exaggerated.

  Larry

• What do the following entries in the following configuration file?

  What do the following entries in the following configuration file?
  Thank you
  < include > coherence-pof - config.xml < / include >
  < allow-interfaces > true < / allow interfaces >
  true < subclasses allow > < / subclasses allow >
  

  <?xml version="1.0"?>
  <!DOCTYPE pof-config SYSTEM "pof-config.dtd">
  <pof-config>
  <user-type-list>
  <!-- coherence POF user types -->
  <include>coherence-pof-config.xml</include>
  <!-- com.tangosol.examples package -->
  ...
  <allow-interfaces>true</allow-interfaces>
  <allow-subclasses>true</allow-subclasses>
  </pof-config>

  -L' allow-interfaces to indicate if the class name of the type of user can specify types of Java interface in addition to the Java classes. Valid values are "true" or "false". Default value is false.

  -L' allow-sub-classes element indicates if the user-name of the class type can specify a type of Java class which is abstract, and whether subclasses of any type of user specified name of the class will be allowed during execution and automatically map to the super class specified for a serializer. Valid values are "true" or "false". Default value is false.

  -L' user-type-list element contains zero or more elements of type of consumer. Each type of user POF that is used must be included in the list-type-user. The item of list-type - the user can also contain zero or more include items. Each includes element is used to add items of type user defined in another pof-config file.

  The include element specifies the location of a pof-config file to load items of type user of. The value is a string of locator (URL or a valid path) that identifies the location of the target pof-config file.

  http://wiki.tangosol.com/display/COH35UG/user-type-list

  http://wiki.tangosol.com/display/COH35UG/POF-config

  Thank you

  Everett Williams
  Team coherence

• Support for the PCoiP Clipboard file

  Dear all,

  I thought that does support the PCoiP Protocol in view 5 now to copy files from the local office in the desktop view. I see the text copied from the Clipboard is supported.

  Am I missing a setting in group policy or is the copy of file is not yet possible with PCoiP?

  Thank you

  Edy

  Copy and paste text and images between a local Windows client system and the desktop is supported, up to 1 MB. Supported file formats include text, images, and RTF (Rich Text Format). You cannot copy and paste system objects such as folders and files between systems. »

  The foregoing was found here, http://pubs.vmware.com/view-51/index.jsp?topic=/com.vmware.view.planning.doc/GUID-6271FC23-20C3-4EDA-934D-FF45DF9419F9.html

• Cannot deploy when you use the FPGA configuration file

  Hi all

  I'm new to NI Veristand. We use a controller NIPXI 8108 with a map of FPGA OR 7841R. Is the used chassis OR PXI 1042 q. VeriStand does not deploy, when we try to add the target FPGA. For adding, we used the default for NOR 7841R provided with veristand FPGA configuration file. The error is attached! Without adding the FPGA target, we are able to deploy.

  We programmed with LabVIEW FPGA card and it works.

  Please help us!

  Thank you

  SID

  Hi Sid

  This is because the FPGA card is not connected through the chassis

  Right click on the (unidentified) PXI system and identify as PXI 1042 q.

  Right-click on the PXI-1042 q system and identify the PXI-8108 controller.

  Then it will automatically fill the devices under the controller

  Now try to deploy again. It will work

  -SID

• Migrate the C350 to the C370 configuration file

  Hello

  We are modernizing our C350 to C370s device. I want to know is can I export the configuration file of the C350 (with all the settings intact) and then restore the C370 device.

  I guess the host/IP name must remain the same and we will have to ensure that the OS Async version is the same on both devices.

  Is this possible? Anyone have any experience doing this?

  Thank you

  Steve

  I did it, but its been a while.

  They do not have to be the same IP/name (you can change the XML file), but you want on the same version.

  The export of the old and get the XML file locally (download via FTP or email to yourself, with exposed passwords)

  Look at the XML file and change the network (I use Notepad ++ as it can make syntax highlighting)

  FTP the XML file to the new box, then load it. (The last time I did it, he did not want to download from my office...

  Hope that helps.

• Could not get configuration "archive folder" in the Panel "configuration files".

  I'm glad Oracle server v 11.1.1.6, I tried to archive files and documents, but was unable to find the "set up archiving of file" option in the menu "configuration of the folder. Please tell me how to archive documents?

  Hello

  You have the FolderStructureArchive enabled on the server component? If not, then turn it back on, restart the server of the University Complutense of Madrid and test. The menu option would come as a separate after the Configuration of the files.

  I hope this helps.

  Thank you

  Srinath

• Oblix_OBWebGate_AuthnAndAuthz:... - cannot read the log configuration file.

  Hi all

  I have a painful problem with Oracle 10 g Webgate. I use Oracle_Access_Manager10_1_4_3_0_linux64_APACHE22_WebGate to procted resource Apache. I have a custom authentication plugin problem. is not yet resolved (https://forums.oracle.com/thread/2549716).

  Now I apply patch BP9 for Webgate (Oracle_Access_Manager10_1_4_3_0_BP09_Patch_linux64_APACHE22_WebGate), now I have a new problem, I am unable to get the OAM login page when trying to access my resources to Apache.

  The Error Message in the browser is:

  Internal server error

  The server has encountered an internal error or misconfiguration and was unable to respond to your request.

  Please contact the server administrator, root@localhost and inform them of the time the error occurred and anything you might have done that may have caused the error.

  More information about this error may be available in the server error log.

  Apache/2.2.3 (Oracle) Server at apache.tigerit.com Port 80
  In the error log file of  Apache I have found

  [Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:17 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:20 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

  [Sun Jun 23 11:53:35 2013] [error] [client 192.168.1.156] Oblix_OBWebGate_AuthnAndAuthz:  Error: /opt/netpoint/webgate/access/oblix/config/oblog_config_wg.xml - Unable to read log configuration file.

   

   

  Can Anyone help me regarding this issue...

   

  Thanks

  Tamim Khan

• supported in the RTMP .m3u files?

  Hello

  RTMP does not appear to be supported in m3u playlists. Can you please check this or help me correct my mistakes?

  # This is a list of reading.

  images/preVideo.png

  RTMP://FMSserverAddress/video_400.FLV

  images/postVideo.png

  _____

  Yes, sorry, that you simply remove the .flv extension:

  http://www.personal.PSU.edu/dxb277/blogs/squeezeTheMoment/strobeTest/strobe.HTML?src=rtmp: //wc-fms.outreach.psu.edu/wc/COMM150/L12_film_1000

  I guess you need the same for active m3u.

• No supported in the update configuration manager esxi 4.1 5.1 HP DL580 G7

  I am using the HP custom esxi iso to upgrade a crowd of 4.1 to 5.1, but is it the following error. any idea?

  I managed to push through even with the caveats and host had put very well.

• Cannot find the corrupt configuration file to be recovered.

  I had a similar problem to many people, with my computer telling me that the windows\system32\config\system file is corrupted missing. But after trying the steps on the support page, I got no further than the first step that the files that I need to copy could not be found. I tried to jump to their compensation, but, yet again, as they cannot be found, they cannot be repaired! Don't know what else to try as no command doesn't seem to work with anything whatever in the config folder. Then, try the system restore, but don't even know if it's likely to work?

  Any help would be greatly appreciated!

  The problem is usually a corrupted file system and not a damaged or missing file.  The message means that XP tries to start, but just can't find or get the file.  A chkdsk /r usually clears it right up, but when the mistake of Googling, KB307545 is the first results, so unfortunately, it's where people start sometimes.  KB307545 is a corrupted registry or a file system afflicted.  If the file system is corrupted, you will get frustrated quickly with KB307545.

  KB307545 doesn't really work if you follow the directions exactly and you do not have a problem of file system, but I've never, never, never used to solve the problem you describe because it is usually never really necessary.  Recording file corruption does not usually go to the origin of the error.

  If you want to use KB307545, which is something you would do to get your whole system running long enough to make a 'real' system restore, but only after running a chkdsk/r from the Recovery Console.  There is no such thing as a "restoration of the manual system.  There is a "get my system functional enough to do a regular system restore".  KB307545 and a regular system restore are not interchangeable.  It could also be that your system restore is just totally whacked on too much by train.

  What happens when you try to start your system in Mode safe?  What is the last thing you see on the screen?

  What does ' not loading everything '?

  If you use the Recovery Console to implement the KB307545 and have already tried, name changes will not work until you remove the files target of your previous efforts.

  If you want to rename fileA to fileB, you must first remove the current file (if it exists).  Change of name is not identical to the copy so if the target file already exists, you cannot rename just another file on top of it.  You will get an error message.  You will need to delete the old file first, and then rename.  That is why your worked the first time but not the second time - the file you are trying to rename already exists.  You cannot rename on top of an existing file.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• How to create a section in labview using the screw configuration file

  I am trying to create a new section in Labview. All I see is the possibilties for reading of the sections and keys, write key, remove sections. Is it possible to write a new article in Labview.

  Thank you

  Brandon

  When you write to a key, you will need to provide a section.  If the section is not there, then it will be created.  Basically, you can have a section without any keys.

• Restore the system configuration files

  I was running the restoration of the system of the laptop and the battery dies before completing the restoration of the system. After loading it that the laptop does not start it makes a loop on the system recovery options.

  If you lost power during an operation system then your drive is probably corrupted and you need to clean installation using your CD-ROM Windows 7 CD or a recovery disc factory that came with your computer.  If you do not, you can contact the company who made the computer to ask for a replacement.

• Can not build waterfalls sample application: can not find the qmake configuration file

  When you try to build a sample application stunts for debugging on the PlayBook, I have some errors in the output.

  I am running Windows 7 (64 bit) using the QNX Momentics IDE.

  Here is the result:

  ----------------------------------------------------------------

  Build the unit for project HelloCascades debug configuration *.

  make the device debugging
  C:/SDK/BB10/host/win32/x86\usr\bin\qmake-spec unsupported\blackberry armv7le-g ++ o arm\Makefile device += HelloCascades.pro CONFIG
  WARNING: Did not find:... / SRC/.h
  WARNING: Did not find:... / SRC/.h
  X-unsupported\blackberry-C:/SDK/BB10/host/win32/x86\usr\bin\qmake-spec 86-g ++ o x86\Makefile simulator += HelloCascades.pro CONFIG
  WARNING: Did not find:... / SRC/.h
  WARNING: Did not find:... / SRC/.h
  make - C. / translations f Makefile update release
  make [1]: Entering directory "C: / SDK/BB10/Apps/translations
  C:/SDK/BB10/host/win32 / x 86/usr/bin/lupdate HelloCascades.pro
  Update 'HelloCascades_en_GB.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades_fr.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades_it.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades_de.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades_es.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  Update 'HelloCascades.ts '...
  Found 0 text (s) source (0 new and 0 already existing)
  C:/SDK/BB10/host/win32 / x 86/usr/bin/lrelease HelloCascades.pro
  Not found in directory name racineLe qmake configuration is not valid.
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_en_GB.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_fr.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_it.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_de.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades_es.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  Update 'C:/SDKs/BB10/Apps/translations/HelloCascades.qm '...
  Generated translation (s) 0 (0 finished and unfinished 0)
  make [1]: leaving directory ' C: / SDK/BB10/Apps/translations.
  make - c / arm f Makefile debugging
  make [1]: Entering directory "" C: / SDK/BB10/Apps/arm ' "
  do f Makefile.Debug
  make [2]: Entering directory "" C: / SDK/BB10/Apps/arm ' "
  Not find qmake configuration not found directoryCould extended fichierExemple of use OS qmake configuration before you define MAKEFILE_GENERATOR/usr/bin/sh: C:/Users/ROSSL~1/AppData/Local/Temp/make4028-1.sh: no such file or directory
  make [2]: * [o.le - v7-g/HelloCascades] error 127
  make [2]: leaving directory ' C: / SDK/BB10/Apps/arm.
  make [1]: * [debug] error 2
  make [1]: leaving directory ' C: / SDK/BB10/Apps/arm.
  make: * [Device-Debug] error 2

  Build completed *.

  I have bolded the output where I think the problem might be involved.  Is there a problem with the Makefile, or is it a directory I'm missing, or anything else?  I can't see why there is an error while compling.

  Thanks for any help.

  I have the same warnings qmake... is not found . But finally, after that I could successfully implement the objective of the Simulator, the sample application running, even with this qmake warnings.