migrate vm via crossover connection

Similar Questions

• I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  https://eShop.MacSales.com/item/NewerTech/MXPCIE2E2U3/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6G2S2/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6GRS4E/

  https://eShop.MacSales.com/item/sonnet%20Technologies/TSATA6PROE2/

• Trying to copy a video on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Trying to copy a video to my iPad Pro on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Which sector adapter are you using?  The digital adapter AV output is digital, which is not compatible with analog VCR.

  iOS: on adapters AV digital Apple

• I need to control my camcorder sony via LANC connection

  I need to control my Sony camcorder via LANC connection.  At the moment, I can control the camera through Tera term, through the serial port of the computer, via a LANC Sony controller card to the camera.  I would build a LabView program where I can click on the buttons to control the camera via the serial port.  Example: power zoom; Zoom out; etc...  I know that orders to control the camera because I typed them, Tera term.  How to associate orders with buttons in LabView for run commands?

  Thanks for your help.

  Before there was a structure of the event, everyone had to use a while loop with a case statement. At each iteration of the loop, the value of the control to the case statement must be read. This was/is called mark and used a bit of resources on the computer. With the structure of the event, nothing runs until an event is happening - no vote office and the resources of the computer used are minimal.

  The data event node returns different information depending on the event and the control that raises the event. In the example that you cite, the NewVal is connected to the structure of the case. It is the same thing that the control wiring, but in some cases, the command can be placed in a different event. You can have a single event triggered for multiple controls, and in this case, you might want to use the CtrlRef (control reference) to determine the actual control. There are a lot of possibilities.

  The option button is an enum. The case statement must match the enum values. Those who are not visible in the example. Right-click on one of the controls, then select the visible items > Label. If you change this, you will see the value in the change of the case statement.

  In order to send hex, you can simply right-click on your control station / constant and select "hexadecimal display. You can also use the Typecast and an array of bytes to a string. This question has been asked and answered hundreds (or even thousands) of times and there many examples of programs attached to these positions. Do a search.

• How to make win 7 to prefer wired via wireless connections

  I have 2 internet connection in my laptop. wired or wireless. Win 7 prefer him wireless on the trendy though wired a metric is lower. How can I get win 7 to prefer wired via wireless connections?

  The average best absolute to ensure that you will always connect to wired and not wireless is to disable wireless on your computer. Just note that you need to re-enable it if you ever want or need to use wireless internet.

  To enable or disable the radio on your computer: click on START, then Contorl Panel, then Device Manager. Right click on the wireless adapter , then click on disable.

  To reactivate, simply click in the same place, which should read allow.

• Connect two ESXi 5 hosts via crossover cable

  Hi all

  I am trying to configure two separate of ESXi hosts so that I can run Veeam replication on the subnet that I will create on the crossover cable. I have an open port on a NETWORK adapter on each host, but I could not understand how to assign an IP address for each port. The destination host has not all VMs, so I can't configure the port through the guest OS. Is it still possible?

  Thank you all!

  It is possible - you need to create the vmkernel ports that use these physical uplinks

• PC migration - converter could not connect to the remote computer. A general error occurred: unknown internal error

  Hello

  I am brand new to fusion m v so forgive me if I miss useful information of the first post time around.

  I try to use migrate your PC, feature of VM Fusion 8 but I see the error in the title of the topic when I try to start the import operation.

  I have disabled the firewall on the PC and MAC

  I tried over ethernet and direct connections

  When I run the migration of PC Windows tool, he complains that UAC is enabled even if it is not (confirmed via Control Panel and evolution via the command prompt)

  When you try to migrate, it accepts the PIN and then shows a warning on this certificate, that I choose to browse

  He will then ask admin username/pass on the PC (I tried my only regular and also tried setting a new admin user and try this)

  After that, I see the error: the migration of PC - Converter could not connect to the remote computer. A general error occurred: unknown internal error

  Should I keep trying to get this working, or that it will be more easy to find a way less direct to turn the PC to a virtual machine on the Mac?

  I found the logs on mac and have posted what I think is the appropriate one below, but not really sure:

  LOGS *.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Log for USB VMware pid = 3550 Arbitration Service version 12.1.0 = Build = build-3272237 option = output

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: The process is 64-bit.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host codepage = UTF-8 encoding = UTF-8

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: Host is Mac OS X 10.10.5 (14F1713), Darwin 14.5.0

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: VTHREAD initialize main thread 3 'usbArb' tid 119357

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: could not open the file "/ Library/Preferences/VMware Fusion/config ': no such file or directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file found in/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / settings ": not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preference of option of PREF file not found at/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings. Using the default values.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: DictionaryLoad: cannot open the file ' / dev/null/Non-existing DEFAULT_LIBDIRECTORY / config ': not a directory.

  2016 04-21 T 11: 12:50.088Z | usbArb | I125: Preferences optional PREF file not found in/dev/null/Non-existing DEFAULT_LIBDIRECTORY / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: DictionaryLoad: could not open the file "/ var/root/Library/Preferences/VMware Fusion / config ': no such file or directory.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Preferences optional PREF file not found in/var/root/Library/Preferences/VMware Fusion / config. Using the default values.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: Deactivation of the preferences of the user PREF because disableUserPreferences is set.

  2016 04-21 T 11: 12:50.089Z | usbArb | I125: PREF cannot load the user's preferences.

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - PARAMETERS GLOBAL/dev/null / Non-existing DEFAULT_LIBDIRECTORY/settings

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - NON PERSISTENT

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - USER PREFERENCES

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - default USER IS/var/root / Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - HOST by default IS/Library/Preferences/VMware Fusion/config

  2016 04-21 T 11: 12:50.090Z | usbArb | I125: DICT - SITE by default IS/dev/null/Non-existing DEFAULT_LIBDIRECTORY/config

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: USBArbRuleStore: loading rules of "/ Library/Application Support/VMware/usbarb.rules".

  2016 04-21 T 11: 12:50.091Z | usbArb | I125: VMware USB Arbitration Service Version 15.1.7

  2016 04-21 T 11: 12:50.091Z | machPoll | I125: VTHREAD beginning thread 4 'machPoll' tid 119359

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: trying to connect to an arbitrator on/var/run/vmware/usbarbitrator-socket.

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET create new socket, connect to/var/run/vmware/usbarbitrator-socket

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: SOCKET connection failed, error 2: no such file or directory

  2016 04-21 T 11: 12:50.366Z | usbArb | I125: USBArb: unable to connect to the existing arbitrator.

  2016 04-21 T 11: 12:50.398Z | usbArb | I125: USBArb: UsbArbPipeConnected: connected to the customer, outlet: 4

  2016 04-21 T 11: 12:50.399Z | usbArb | I125: USBArb: 3450 Client connected (version: 7)

  Well well just in case someone found this one in the future, the question turns out to be that my PC has been joined to a domain, but I was connected to a local account. I solved the problem by leaving the field. There may be other ways to work around this problem.

• Can I access wifi via my cell connection on my iPhone 6 if there is no available wireless system? My husband Samsung cell phone can access wifi via cellular connection.

  Can I access wifi via my iPhone 6 s cellular system? My husband Samsung cell phone can do that when no wifi system is obvious.

  I need to change the above question. How can I connect Internet through my cell system if no wifi is available? Thank you.

• P6635UK Pavilion of Nokia via bluetooth connection

  HI -.

  I have a p6635uk pavilion hp, hard connected to a modem, and I try to connect my Nokia 5210 via bluetooth.

  in oder to download some pictures of her.

  I am running Windows 7 64 bit Home Premium edition.

  I used to be able to connect via bluetooth (same phone Nokia) when I was running XP on my old pc disappeared.

  When I type the word bluetooth in the box "search programs and files", it shows that I have a bluetooth file transfer, click on this point, he asks if I want to send or receive files of entry to receive files, I get the message "no files can be sent because the connection could be established. Check that the bluetooth radio is connected. »

  I assume by bluetooth radio, that it is referring to the Nokia has no it is turned on bluetooth.

  The Nokia, when go to research, says "no device found".

  Is there something else that needs to be enabled. Any help would be appreciated.

  Cypriana

  Cypriana,

  Here are the specifications of your desktop HP Pavilion p6635uk. According to the specifications, the only network device installed on your computer is the Realtek RTL8111DL network adapter 10 / 100 Mbps. Unless you have purchased and installed a x 1 PCIe 802.11 Wireless card / adapter Bluetooth or a dongle USB Bluetooth, your computer cannot communicate with a Bluetooth device such as your phone. You will need to buy a Bluetooth adapter to enable Bluetooth communication on your computer. If you have a USB cable for your Nokia phone, you can transfer the pictures without Bluetooth.

• Re: Satellite A300-1MC - no sound via HDMI connection

  When I connect my Satellite A300-1MC on via connection receiver HDMI audio Yamaha in order to play music, no connection is possible, even without sign HDMI on the receiver is lit?
  any ideas?
  problem with the drivers or something else?

  This Toshiba document may be useful:

  + No sound via HDMI +.
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm

  The error is caused by the order of the pre-installed Intel display driver installation.
  The problem could be fixed by reinstalling the Intel Display Treibers V15.9.5.1502 or higher.

  Check it out!

• Tab 2 A10 - 70F: Internet access via USB connected 3G / 4G device?

  Hello

  The A10 - 70F Tab2 has WiFi only. Is it possible to connect to the internet with a connected USB 3G / 4G? With other words: the tab can handle? Anyone with experience?

  Thank you in advance,

  Michael

  Yes is the short answer. And a few ways to do this:

  1 micro USB Dongle of 3 / 4 g

  2. micro USB to USB 'female' - then plug a 3 / 4 g USB Dongle

  And a couple of less obvious ways:

  1 WiFi connection to another mobile and use of mobile data of quotas (although plans only works on some data)

  2 micro USB to Micro USB and connect a mobile as shown above (does not work on all devices, although I look at the phone and tablet to fight for the battery juice is hilarious)

  3. connected to a PC via the cable USB/WiFi connection internet PC use.

  But yes, 3 / 4g Dongles work indeed & the Tablet seems to walk along very well with a micro USB version or a USB version with an adapter cable.

• FPGA for PC via UDP connection

  Hi all

  Background

  I am currently working on a project to interface an FPGA with a PC, to send a UDP load prepared on the FPGA for the PC. The FPGA is preparing a payload of 18 hexadecimal bytes from h00 8' to 8' h11 and then transmits it via a local network on port 1024, between the FPGA and a second network card in the PC, with static IP assigned to the second network card and the FPGA. Packages leave the FPGA and reached the PC (tested with wireshark) but the vi does not appear meet the payload and display it on the screen in the vi. The vi is based on that comes with labview and only has a few adjustments for most simply to write the final packages saved to a text file.

  Problem:

  Initially, when the vi was run the length of the chain kept evaluate to zero and so he perceived no bytes don't read from the port. I then inserted the flatten channel vi after the UDP read and before the comparison of string length (after reading something on the forum), now the length of the string is not evaluated to zero to 4 instead of this, I also changed the display to the spell option but the same 4 Hexagon keep coming through '0000 0000 0000 0D0A' , but they are not those who have been sent from the FPGA (are they an error message?) and not those taken over by wireshark. In summary, I seem to not be able to read the data of the UDP payload in Labview.

  I tested the VI locally using the Protocol UDP send labview vi and vi (slightly) custom receiver and it still works. The receiver that VI is attached.

  Any suggestions would be great,

  Thank you

  James.

  You can share the wireshark log (preferably in a format based on text that I did not install Wireshark)?

  Are you sure that is no firewall problem? If you are using a firewall, disable it completely for this network card or at least ensure that it accepts connections on UDP Port 1024.

  In addition, set the UDP sender VI on another computer and see if you are still receiving data. If it works, compare logs wireshark compared to what is sent by the FPGA and search for differences. If this does not work, then you have a network like a firewall problem.

• laptop to tv via HDMI connection

  When I cnnect my laptop to my tv via hdmi cable nothing shows... are thereany settngs I need to change or ways about to choose to show on TV? my old office hp on the tv works but can't get my brand new laptop for work.

  Hello @teamkylissa,

  Welcome and thank you for using the HP's Support Forums.  So just to be clear.  When you connect your computer to your new HDMI cable laptop to TV, you get no video on the TV screen.   Well, this is something that I totally understand because it happened to me.  There are a few things to check the extent of setting to go and here is a link that you can check to see if it solves the problem.

  Connect your PC to your TV via HDMI (and more)

  If this is not enough and I hope that he does now.  If you can, please provide me with your information system as much as possible.  Offshore, we can start with your model number and product.  Use this link below to help you find this information.

  How can I find my model number or product number?

  So, I need the operating system that is running your laptop. Here is a link to help you find that information.

  Operating system Windows am I running?

  I hope to hear from you.  If the first link did not help with the other information that I asked for, we would be able to get to the bottom of the matter.

  Thank you and have a nice day.

• R710 IDRAC6 series via ssh: connect com2 returns COMMAND NOT RECOGNIZED

  Hello

  I configured successfully on ssh several times serial console redirection on different dell servers, but now I'm stuck with two R710s.

  The problem

  I can't use the connect command:

  /Admin1-> connect com2
  cmdstat
  status: 2
  status_tag: PROCESSING COMMAND FAILED
  error: 253
  error_tag: COMMAND NOT RECOGNIZED

  Configuration

  Version

  BIOS is 6.1.0, cli version output is:

  /Admin1-> version
  CLP SM Version: 1.0.2
  SM ME treat Version: 1.0.0b

  I have configured the redirection as before:

  BIOS

  Communication series	On with the Console via COM2 Redirection
  Address of the Serial Port	Device1 Serial = COM1, Serial Device2 = COM2
  Connector external series	Remote access equipment
  Failsafe baud rate	115200
  Remote Terminal type	VT100/VT220
  Redirection after boot	People with disabilities

  iDRAC

  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialBaudRate 115200
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialConsoleEnable 1
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialSshEnable 1
  Value of the object successfully changed
  /Admin1/system1/SP1-> racadm config-g cfgSerial o cfgSerialHistorySize 2000
  Value of the object successfully changed

  The command is now console, not connect.

  And that's exactly what is said in the docs - it's just that I had not noticed the change and read 'connect', where 'console' was written.

  A big thanks to Lars Handrick Support Dell Germany for reporting the change of command name for me.

• Films streaming Itunes to Sony TV via wireless connections?

  Trying to play computer Itunes movies to HX from Sony TV series with connections wireless establishesd already, but error message in Windows Media player: "cannot retrieve information about the UPnP Server media"after a minute or two." The TV can access the files on the computer, but it will not pick up Itunes movies (maybe cause they are MP4 not MP2? so I thought I could spread via media player without success please help me.)

  Hi Alliwantfor Christmas,

  1. what type of Internet connection do you use?
  2. don't you make changes to the computer before the show?

  I suggest you try the steps from the following link:

  Getting started with streaming media
  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-media-streaming

  Additional information:
  Stream your media to devices and computers using Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/stream-your-media-to-devices-and-computers-using-Windows-Media-Player