How to make win 7 to prefer wired via wireless connections

Similar Questions

• Wired or wireless connection. Was not identified until the restoration of the system. Windows Vista Ultimate

  I am currently on my laptop. I have my Windows Vista Home Premium desktop connected with a wire to the internet, and there is currently no link. I can't even connect wirelessly, and yet my laptop is fine with both. It was not identified until I restored the a few days before, and now he has no connection whatsoever. Type of emergency because my business is at a standstill right now because of this.  Edit: Where you plug your cable internet on your computer, it normally has a flashing beside him, but it currently isn't. I can plug the wire into my laptop and it works fine, but not with the office. So I know this isn't a problem of modem/router, it's a computer problem.

  Hello

  Please follow the steps mentioned below and get back to us with the results.

  Method 1: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  See also: Internet to solve connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  In the case where the flash light does not appear, this could be a problem with the wire or the port network, so you can consider contacting the ISP (Internet Service Provider) to get help.

  I hope that helps!

• How to make win Explorer Options stay even each time to open the folder

  Using Vista Home Premium SP1, in the view of STANDARD as in XP. When I open Win Explorer I resize the window, adjust the display, change the column headers, change the column sizes and others. In other words I customize the display of the window I want and do my thing, then close when you are finished. The next time I open pgm all parameters resumed all that. "Obviously I tried to change all the options I can find but now, asking" HOW can I DO FILE VIEW OPTIONS RESTENT EVEN EACH TIME PGM IS OPEN?"

  Hi Willie_wonka,

  Thank you for using the Microsoft answers Forum.
   
  When you open a window and resize it, and then close, the new window will remain the same, until what you restart. Once you restart the computer, this is the default value. There is no option in windows to keep. However, you can try work around here.
   
  Open a window and make it the size you want
  Open a 2nd window and are the same size.

  The 1st window to the front, hold CTRL and click the red X in the upper right corner.
  Close the window of the 2nd in the same way using CTRL.

  You can also restore the default settings of the display of the tools-> Folder Options-> view files-> restore default settings.

  This should solve the problem.

  Kind regards

  Manasa P-Microsoft Support.

• How to make/receive the phone call from a laptop connected to the smartphone via bluetooth?

  Dear community of Microsoft,

  I have a smartphone (Samsung SCH-I759) which I want to connect to a laptop running Windows 7 Professional, then I could make/receive the phone call on the cell phone.

  After browse around, I saw several methods to do are pretty simple. Activate bluetooth on both devices connect, match and set - the bluetooth device menu.

  When I followed these instructions, I was able to pair the devices but the ability to use the bluetooth connected as a phone smartphone does not appear. Instead, I have less accessible services in the menu. Here is the screenshot:

  

  For those who have been successfully pair and use their laptops as phone, would you care to share the how-to?

  Thank you

  NALA Jati

  It depends on the abilities programmed into your phone. Your photo, I can say that is not possible on your phone, then you will not be able to do.

  If you want to make/receive calls on your computer, you could try to use Skype or Google Voice.

• How to make impression on the DMP printer via Puslished ERP solution

  Hi all

  We use vWorkspace 8.0 and an ERP application are published about it.

  We are not able to make impression on locally installed DMP TVSE printer.

  Please suggest.

  Thank you

  Jean Claude Kumar

  + 919811122302

  Hello

  I ran from the prompt of my back

  NET use LPT1 \\printserver\myprinter

  I do not have your app so I ran the following dos command to test back print

  print /D:LPT1 c:\mydoc.txt

  This fine all worked.

  Try this approach, it'll probably work for you also.

  Andrew

• limited connection - wired and wireless connection

  all devices, but this wireless to a 3 and 2 wired connection works with router/isp

  one device gets continually unidentified network

  have tried changing ports - resetting routers and cables

  Tech ISP could not solve

  even added a wireless - device to connect netgear usb and used to connect

  He sees the network and tries to establish connection, but only gives limited connection and leave it as a network not identified on the local network connection and Wi - Fi

  ran on CMD - ADMIN MODE

  netsh winsock reset
  netsh winsock reset catalog
  ipconfig/flushdns
  ipconfig/release
  ipconfig / renew

  

  None of your answers allowed. I ended up understand mine. My avast firewall was blocking the internet. When I updated the driver for the firewall port and changed its settings, I was able to access the network again.

• How to find my WPA/WPA2 key for PS3 wireless connection?

  My needs for PS3 the WPA/WPA2-keys is my network PC or router.  Everything I tried failed.  I fear that my own PC network is assigned a new WPA key to my router and I can't find that key.  Is there a universal key by default?   Is this something I can unknowingly put in place myself?  Wouldn't be easier to just start a new home network and assign new keys?  Help, please!

  You will need to connect to your router and see if the security key is available for consultation.

  If this is not the case, as you say, it would be easier to reset the router to factory settings and start over.

  We cannot help you find missing security keys:

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• How can I make a tab by default whenever I have connection to the portal of the webcenter spaces?

  Hello

  I have a single page in the portal of webcenter spaces, which is the default portal in the webcenter application. This single page has 6 or 7 like Home tab and the other tabs. Whenever I logged in the webcenter I can see the url redirects to my default portal but it doesnot get home tab made, instead, it shows the tab where I left just before disconnected tab.

  For example I have tabs A, B, C, D etc... I have logged in to the application portal and I did something in tab C and then I logged. After once again I re-login, I see this tab C shows, but I want to see that tab must be returned. Someone help me how to make a tab by default whenever I have connection to the webcenter portal.

  Thank you

  Ashok Laura.

  Hello

  This is an expected behavior as his persists the State of users. I did face this problem before and solved by setting the disclosed condition of showditailitem programmatically.

  Please check below the code for your reference.   Invoke the bean managed prior to the loading of the page to

  {} public void onPageLoad (PhaseEvent phaseEvent)

  If (phaseEvent.getPhaseId () .equals (phaseEvent.getPhaseId (). RENDER_RESPONSE)) {}

  If (!.) {AdfFacesContext.getCurrentInstance () .isPostback ())}

  If (this.newsPanelTab! = null) {}

  List childUIComponent = this.newsPanelTab.getChildren ();

  If (childUIComponent! = null & childUIComponent.size () > 0) {}

  for (int i = 0; i)< childuicomponent.size();="" i++)="">

  If (childUIComponent.get (i) instanceof RichShowDetailItem) {}

  If (i == 0) {}

  ((RichShowDetailItem) childUIComponent.get (i)) .setDisclosed (true);

  } else {}

  ((RichShowDetailItem) childUIComponent.get (i)) .setDisclosed (false);

  }

  }

  }

  }

  Thank you
  Amey

• How to make a wired internet connection to my macbook pro?

  How to make a wired internet connection to my macbook pro

  < removed >

• How to make the network I have a WinbitXP, 32 bit SP 3 to a Win 7, 64?

  How to make the network I have a WinbitXP, 32 bit SP 3 to a Win 7, 64?

  Monday, February 27, 2012 04:40:18 + 0000, Bruce Giese says:

  How to make the network I have a WinbitXP, 32 bit SP 3 to a Win 7, 64?

  Make sure that you create a Working Group. Do not create a homegroup, which
  can only be used with Windows 7 computers.
  Ken Blake, Microsoft MVP

• Laptop Compaq Presario CQ60-300SO - how to make HDMI work with Win 7

  I've upgraded to Windows 7 from XP.

  I connect the HDMI cable to my TV.
  The PC displays both screens, but there is no signals reaching the TV.
  I uninstalled the software of the graphics card and let the Win Update to find the driver. Same results.

  Here's my setup.

  How to make it work? It works very well with a VGA cable. And I tried many televisions.

  Martin

  _________________________________________________________________

  Name of the operating system Microsoft Windows 7 Enterprise
  Version 6.1.7601 Service Pack 1 Build 7601
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the MARTSHP system
  System manufacturer Hewlett-Packard
  System model Compaq Presario CQ60 Notebook PC
  System Type X 86-based PC
  Processor AMD Sempron (TM) TR-42, 2100 Mhz, 1 Lossnay, 1 logical processors
  BIOS Version/Date Hewlett-Packard F.54, 18.08.2009
  SMBIOS Version 2.4
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.1.7601.17514".
  MartsHP\Administrator user name
  Zone schedule Southeast Asia standard time
  Physical memory (RAM) 4.00 GB
  Total physical memory 2.75 GB
  1.60 GB available physical memory
  5.50 GB total virtual memory
  4.13 GB available virtual memory

  Hi realpommy. If you encounter problems with HDMI output and let Windows determine the pilots, who could be part of the issue.  First of all try to install these Windows 7 drivers provided by HP for your laptop: NVIDIA nForce Chipset MCP77MV graphics drivers

  After installation and reboot, if you still have problems with video output look in Device Manager, to ensure that there is no error, or "unknown devices".  The section "Understanding of the symbols of error Device Manager" in this document:
  Information from the Device Manager in Windows 7 to illustrate some possible errors.

  If there is no error in Device Manager, do through these documents for more information and the last for troubleshooting ideas:
  Connection of a monitor, projector or a TV (Windows 7)
  Overview of HDMI and DVI for PC connections

  HDMI display resolution and problems of his (Windows 7 and Vista)

  Let me know if it helps.

• How to make the progress bar display in the icon in the taskbar for WIN 7?

  How to make the progress bar display in the icon in the taskbar for WIN 7? I see Eclipse Helios can show the loading progress bar in the icon in the taskbar of WINDOWS 7 at startup.

  Is not the feature that provides JavaFX, you must write a native connection called technology such as JNI to make specific Windows API call for updating the icon in the taskbar for the application.

  Maybe you could go through the Eclipse source code to see how Eclipse and see if you can make use of the same mechanism in your application.

  More tips on how you can implement this are outside my area of expertise.

• How to make a picture of MS and a recovery CD to my HD using Win Pro 7?

  I completely under license from MS Windows 7 Pro and Office Pro 2007.

  I recently went though a Script virus trouble which resulted in my need to blow away (reformat) the HD and install all my programs under license and all the drivers from scratch.

  How to make a disk Image of my drive C and also a bootable CD Windows, in which case I have to do this again?

  You hope that it works?

  The day you have your backup/restore tools to work is not the day to know that they don't.

  Why not make a little test... pretend that your system does not start for some reason unknown and impossible to fix and to do the image you have created to recover.

  With the stuff you have since your last operation (a picture that is stored somewhere and a bootable CD), you can at least run a test to see if you can boot from the CD, and then if you can get there far enough, see if you can at least access the images you created.

  Of course, you don't have to actually restore the image - just make sure that you can boot from the CD you have done, and from there, you can at least navigate to and find the image that you created and do things at the point choose to restore your system from this image.

  Have you checked that you can at least get there?

  I use Macrium Reflect (the free version) and keep my images on an external drive.

  I made a bootable USB drive using Macrium.

  To make me feel better about all of this, I started my system on the USB and from there I could navigate to and view system images stored on my external hard drive and could choose to restore the last picture, if I wanted to.

  Of course I didn't really want to restore that image, but at least I got far enough along to believe that if I ever need to restore from an image at least I had something that I could start now and at least find my backup of images in case I ever need to use.

  Will it really work if I ever need to use it?  The only way to know for sure would be to actually try it and see and I could do it one day, but at least it looks promising.

  If you are using built in tools MS you could do the same kind of test and if you encounter a problem and it does not you can understand what is the problem and see if you can remedy.

  Another thing to consider is that if you have a problem with the MS tools and come to this community help I think that it is extremely unlikely that you will find a lot of help with the exception of the most fundamental aspects.  Microsoft has committed that 'experts' alleged Support Engineer here seem unable to solve even the simplest problems.

  If you need assistance with your backup/restore operation I don't think you're going to get a lot of Microsoft because Microsoft is not in the business of backup/restore.  This isn't what they are doing and is not their area of expertise.  You will probably get the best help in using the tools of the companies working in the areas of backup/restore, that's all they do and that's what they are doing throughout the day.

  In these communities of MS, volunteers are always your most reliable resource for solving problems.

• How to make your own Board BNC connector for 37 pins PCI-6010?

  This is first time I am doing data acquisition and the BNC-2110 present can be connected to PCI-6010. How to make a Board for it?

  I'm not sure what you mean by "some"; The BNC-2120 exposes all channels HAVE and AO on connector 0 of a standard feature of E, M or X series.

  • Eight BNC connectors are for eight differential channels of I. For example, for the BNC connector labeled 'I 0', the Center connects to the 'I 0' pine and the outside connects to pin 'HAVE 8'. (The BNC-2120 probably would not be a good choice for someone who wanted to use the channels in unbalanced mode).
  
  
  • Other two is for the analog output; the centres are ' AO 0' and 'AO 1' and transmissions are related to "AO GND".
  
  
  • There is another connector BNC for PFI 0; all other PFI (with the exception of the 10, 11 and 15) are broken down as screw terminals.
  
  
  • Other BNC connectors connect what either directly (the unit is powered by the + 5V line but otherwise works autonomously, and the "user defined signals' are connected to terminals to adjacent screws).

  It seems like it wouldn't be difficult to have a cable that was going on a PCI-6010 the 37 pins on the connector 68 pins on the BNC-2120. I'm a little curious as to why we do not have one. Possible reasons off the top of my head which may explain why not:

  • cards PFI/description would be a mistake (for example, on a series of E/M/X ' CTR 0 SRC "PFI 8; on the 6010 is PFI 0.)
  
  
  • No digital lines (E/M/x series P0.0 P0.7 via are independent; on the P0.0 6010 P0.5 and P1.0 by P1.3 are shared with PFI lines)
  
  
  • Confusion about being able to connect to other devices that we sell with connector d - SUB 37 pin, but who do not use a compatible pinout (for example, the PCI-6239, PCI-6510 or the NI 9237). Here again, a PCI-6703 also uses a 68 connector pins, but has a completely incompatible pinout as well.

  But it seems that those who would be pretty easy to deal with, because it is useful to be able to connect to the BNC-2010. Maybe it's an idea for the Exchange of ideas information Acquisition?

  Anyway, if you want to have pushed BNC for everything on your Board of homebrew will need you:

  • 8 or 16 BNC connectors to HAVE, depending on whether you want single-ended or differential. For differential, the centres are GOT by AI 7 0, and transmissions are AI by AI 15 8. For asymmetric, the centres are HAVE 0 through 15 AI and transmissions should all connect to GND AI.
  
  
  • HAVE a sense (I think that you only need this if you use channels Nonreferenced Single - Ended (NRSE). See also: noise considerations for analog signals and field wiring.)
  
  
  • Two for AO (centers are AO 0 and 1 AO, outers times connect to AO GND).
  
  
  • Ten for PFI/digital lines. Outers will connect to GND D.

  Up to a maximum of 29. You want maybe less, depending on your application.

• 15 - r100nia: how to make the service wirelessly on HP Notebook 15 r-100nia

  Hello

  I just bought this HP 15-r100nia and wireless (f12) light key is perpetually lit & I have yet to extinguish it. The button light color is white, but whenever I search for available networks, it says that there is no network available. This weird because my mobile phone and computer in the same location of Home Office identify the available networks.

  Please, what is the problem and how to solve?

  Hey @folz,

  Welcome to the Forums of HP Support! This is a great place to find solutions and help our community!

  I understand that you encounter network problems on your 15 HP laptop. I'd be happy to help you with that.

  The following pages are useful for troubleshooting wireless connectivity problems.

  Troubleshooting wireless network and Internet (Windows 8)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from HP.com , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please hold me.

  By pressing the Thumbs Up button below, you can always say thank you!

  See you soon.