migrated database recovery

Similar Questions

• The database recovery/restore failed with unexpected error 509

  Hello

  The database recovery/restore failed with unexpected error 509

  In the Event Viewer, I had this error SEVERAL times every second.  He goes absolutely crazy.

  I don't know what to do with it.

  I'm with Windows 8 Pro running on a very stable computer with 8gig of ram, plenty of hard drive space.  Each single drivers updated Windows Update.  Everything is really clean except this error in Event Viewer

  Svchost SRUJet (1624): database recovery/restore failed with unexpected-509 error.

  Task category: registration/recovery

  Esentutl /p /r tried / everything but nothing wrong was found with those

  Thanks for any help.

  Exactly the same problem, nothing Microsoft recommended was the cause, scannow and DISM commands are returned without error.

  So I went to the event viewer and scrolled down to find, when these errors began to occur. So I found a few entries initially saying things like: an attempt to move the file 'C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\EDB.log' to 'C:\Users\xxxxxxxx\AppData\Local\TileDataLayer\Database\EDB00008.log' failed indicating system 183 (0x000000b7) error: "cannot create a file when that file already exists.

  Then, I went to C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\ and removed the files listed (e.g., EDB00008.log).

  Bingo, the errors will stop immediately.

• Best tactic to migrate the recovery catalog

  Catalogue #Recovery
  Oracle9i 9.2.0.1.0
  Windows 2003 Server - 32-bit
  
  Our catalog of recovery is an old, this will improve to 11g, but we need to make a new server for him as well.
  
  Correct me if I'm wrong, but a means should be just to create a new server, install oracle and the database and re - connect all users in recovery catalog to it and make new backups on them for information about the backup in the new catalog.
  
  However, not is it possible to export data from the old catalog of recovery, to the new catalog of recovery?
  
  Please guide me to the best tactics
  
  
  Kind regards

  migrate from catalogue of 9i to 10g

  Read the link.

  Concerning
  Asif Kabir

• Convert DR database recovery pending database

  Hi all

  11 GR 2

  OL 6.5

  I have a backup RMAN PROD server.

  I also backup current cf and cf standby backup.

  Then I copied the following on the DR server.

  1. backup of database

  2. the current CF (controlfile)

  3 stadby cf

  4 archiving logs

  Can I perform a normal recovery using the current see (not yet open)

  My question is, can I replace the current CF with CF Eve, then start going up and resume the recovery pending?

  Kind regards

  JC

  Hello

  Yes you can!

  you will need to take a controlfile Eve since elementary school and replace it.

  RMAN > backup controlfile Eve format ' / tmp/standby_ctl.tmp ';

  Take the controlfile and location pending restore

  RMAN > restore controlfile eve of ' / tmp/standby_ctl.tmp ';

  Once completed.

  SQL > alter the editing of the database;

  SQL > select controlfile_type, open_mode from v$ database;

  -->, he must return to sleep

  SQL > alter database recover managed standby database disconnect;

  Thank you

• The database recovery

  Hi all

  EBS R12.2.4

  OEL6

  I play with the recovery of database > restore database using backup controlfile until cancel;

  but I encountered error:

  ORA-00279: change 5965308871319 September at 29/11/2015 10:49:20 needed to

  thread 1

  ORA-00289: suggestion: /home/ARCH/1_212_894234402.dbf

  ORA-00280: change 5965308871319 thread 1 is in sequence #212

  ORA-00278: log file ' / home/ARCH/1_211_894234402.dbf' is no longer necessary for this

  recovery

  ORA-00283: cool cancelled due to errors

  ORA-01244: datafile (s) without a name added to the control file by the media recovery

  ORA-01110: data file 42: ' / home/oraprod/PROD/data/a_txn_ind10.dbf'

  ORA-01112: media recovery not started

  SQL > shutdown immediate;

  ORA-01109: database is not open

  The database is dismounted.

  ORACLE instance stops.

  SQL > bootable media.

  ORACLE instance started.

  Total System Global Area 2137886720 bytes

  Bytes of size 2230072 fixed

  452987080 variable size bytes

  1660944384 of database buffers bytes

  Redo buffers 21725184 bytes

  Mounted database.

  SQL > restore database using backup controlfile until cancel;

  ORA-00283: cool cancelled due to errors

  ORA-01111: 42 data file name is unknown - rename it to the correct file

  ORA-01110: data file 42: ' / home/oraprod/PROD/11.2.0/dbs/UNNAMED00042'

  ORA-01157: cannot identify/lock data file of 42 - see DBWR trace file

  ORA-01111: 42 data file name is unknown - rename it to the correct file

  ORA-01110: data file 42: ' / home/oraprod/PROD/11.2.0/dbs/UNNAMED00042'

  SQL >

  Help, please...

  Thank you

  JC

  You cannot copy directly, but you can save only data file with rman "backup datafile 42. However, the RCS in the header of the data file would be different now, and you cannot recover.

  You said in one of the message that the file without a NAME no longer exists? You rename it using 'alter database rename file '?

  You can use:

  ALTER database create datafile 42 as ' / home/oraprod/PROD/data/a_txn_ind10.dbf';

  Then run:

  RECOVER THE DATABASE AUTOMATICALLY USING BACKUP CONTROLFILE UNTIL CANCEL

• How to check the number of servers, a unique summer migrated database?

  Is it possible to check the information of the previous server where the database has been migrated.

  Ajay Vijayan wrote:

  The binaries have been transferred from the old server and grid has been installed in the new ASM migration server.

  Alert log is purged according to police.

  Ajay

  1. logically, it can not be followed from the point of view of database. Since when we migrated to new server we can just copy the data files and take the help of rman and migrate (hope you are aware)

  2. If we are not reset all the newspapers during the process, if we do it due to a problem we knew that the level of incarnation (date/time)

  3 database does not take care of these information

  4. perhaps there is an alternative, you can get it from 'DBA_HIST_DATABASE_INSTANCE '.

  that keeps INSTANCE_NAME and HOST_NAME... .When you database runs from host A for 6 months and then you moved to server 'B '.

  5 to start and next stop he will track this new server (provided during migration if you have made a rebound at this time, then you can have alteast moving day)

  6. IF you are looking for server then in the course of the interview you can bounce while patching so separate hostname is able to follow

  -Note - rest depends on the number of records that he takes for his life

  It may be useful

  -Pavan Kumar N

• RMAN-11003 RAC 10 g 2 database recovery

  Hello, I'm doing a full restore of the database and when it was done the recovery database, always get the error:

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover to 15/07/2014 06:07:04

  ORA-00283: cool cancelled due to errors

  RMAN-11003: failure in parsing / execution of the SQL statement: alter database recover logfile ' / archive/archivelog/PEP/PEP1_74_852396492.arc'

  ORA-00283: cool cancelled due to errors

  ORA-01112: media recovery not started

  It's a two nodes with the version 10.2.0.4 RAC' once which annuls the recovery, I open the database and everything is OK.

  The steps are:

  srvctl stop database d PEP

  sqlplus "/ as sysdba".

  bootable media;

  ALTER system set cluster_database = false scope = spfile sid ='* ';

  stop immediately;

  bootable media;

  RMAN target /.

  PARALLELMEDIARESTORE OFF SET;

  RMAN > restore database;

  RMAN > restore database;

  errors:

  RMAN-03002: failure of the command recover to 15/07/2014 06:07:04

  ORA-00283: cool cancelled due to errors

  RMAN-11003: failure in parsing / execution of the SQL statement: alter database recover logfile ' / archive/archivelog/PEP/PEP1_74_852396492.arc'

  ORA-00283: cool cancelled due to errors

  ORA-01112: media recovery not started

  RMAN > alter database open;

  The database opens successfully

  NAME CHECKPOINT_CHANGE # CHECKPOINT_CHANGE # STATUS

  -------------------------------------------------- ------------------ ------------------ ----------------

  /BD/oradata/PEP/System01.dbf 1025895 1025895 Normal startup

  /BD/oradata/PEP/undotbs01.dbf 1025895 1025895 Normal startup

  /BD/oradata/PEP/sysaux01.dbf 1025895 1025895 Normal startup

  /BD/oradata/PEP/undotbs02.dbf 1025895 1025895 Normal startup

  /BD/oradata/PEP/users01.dbf 1025895 1025895 Normal startup

  /BD/oradata/PEP/vmware01.dbf 1025895 1025895 Normal startup

  / BD/oradata/PEP/RMANT01. DBF 1025895 1025895 Normal startup

  There, the error occurs if everything seems to be ok.

  Thank you

  The scenario is very probably below:

  You have restored a controlfile who had an old sequences in his V$ LOG (compared to archived newspapers with the later sequence numbers) and the related recovery online papers were physically available on the disc. RMAN preferred just retrieve available online Redo Logs and therefore simulated a full recovery (anyway, he did not ask CAMILLE):

  Once even a single online Redo Log has been applied, recovery get ORA-283

  My Jul 14 18:14:43 2014

  Recovery Media Log /archive/archivelog/PEP/PEP2_29_852396492.arc<(====== archivelog="" seq#="" 29="" thr#="" 2="">

  My Jul 14 18:14:43 2014

  Online Redo Log recovery: thread 1 mem Group 1 Seq 25 reading 0<(===== online="" redo="" log="" seq#="" 25="" thr#="" 1="" got="">

  Mem # 0: /bd2_PEPui3/redo/redo11.log

  MEM # 1: /archive2/oradata/PEP/redo12.log

  ORA - 279 marked during: alter database recover logfile ' / archive/archivelog/PEP/PEP2_29_852396492.arc'...<(=== archivelog="" seq#="" 29="" thr#="" 2="" throwing="">

  My Jul 14 18:14:44 2014

  ALTER database recover logfile ' / archive/archivelog/PEP/PEP2_30_852396492.arc'

  My Jul 14 18:14:44 2014

  Recovery Media Log /archive/archivelog/PEP/PEP2_30_852396492.arc

  ORA - 288 marked during: alter database recover logfile ' / archive/archivelog/PEP/PEP2_30_852396492.arc'...<(==== archivelog="" seq#="" 30="" thr#="" 2="" throwing="">

  My Jul 14 18:14:44 2014

  ALTER database recover continue

  My Jul 14 18:14:44 2014

  Online Redo Log recovery: thread 1 mem Group 2 Seq 26 reading 0 (= Seq # 26 Thr # 1 newspaper... and so forth below... applied online )

  Mem # 0: /bd2_PEPui3/redo/redo21.log

  MEM # 1: /archive2/oradata/PEP/redo22.log

  My Jul 14 18:14:46 2014

  Online Redo Log recovery: Don 2 mem 3 Seq 31 reading 0 group

  Mem # 0: /bd2_PEPui3/redo/redo31.log

  MEM # 1: /archive2/oradata/PEP/redo32.log

  My Jul 14 18:14:48 2014

  Online Redo Log recovery: Don 2 mem Group 4 Seq reading 32 0

  Mem # 0: /bd2_PEPui3/redo/redo41.log

  MEM # 1: /archive2/oradata/PEP/redo42.log

  My Jul 14 18:14:51 2014

  (PEP2) Complete media recovery

• Migration + database upgrade of 9.2 on solaris to 11R2 on Exadata

  Hello

  I need to migrate a database 9.2 on Solaris Machine on storage of EXADATA (RAC + ASM) 11R2 file system and database size is 2 t

  I see several methods, but I can't find that 2 methods:

  -Insert into select

  -TTS + cross-platform (TTS it is not supported for 9.2)

  It's okay? Can I use other methods?

  Thank you

  Best regards

  The rule here is always use the version lower exports aka in your case, you must use the export source 9.2 to create the dump.

  To import into you can use import 11g.

  For more details, see docs MOS: compatibility matrix for export and import between different Oracle Versions Doc ID 132904.1

• SRM API: How to specify if the recovery operation must be planned migration or recovery after disaster

  Is it possible using the SRM API to specify whether we want a planned Migration or a recovery during failover?

  In addition, exactly how do we use the APIs AnswerPrompt and ListPrompts? Examples would be appreciated. Thank you!

  If you want to run the disaster recovery, you must use the recovery option (number 0) failover Mode. The SRM 5.8, we introduce a new Mode of recovery option - migration (planned Migration - number 5). This command is not added to the SRM API documentation, but will be updated soon.

  Example:

  PowerCLI > $RPmode = New-Object VMware.VimAutomation.Srm.Views.SrmRecoveryPlanRecoveryMode

  PowerCLI > $RPmode.Value__ = 5

  PowerCLI > $RPmode.ToString)

  > Migrate

  Orders ListPrompts and AnswerPrompt have nothing to do with the implementation of the plan (planned or disaster recovery Migration).

  -Daniel G.

• Database recovery mode recommended

  I have a single Windows Server 2012 running MS SQL 2012 of the machine. This server contains all of our databases for the vCloud infrastructure. From now on, all databases use the recovery model Simple, with the exception of the vCloud Director database that uses the full recovery model. I was wondering what VMware recommends for this database, and if it's ok to switch to Simple mode or not.

  Please let me know.

  Thank you!

  We generally recommend a Simple recovery model, as other modes will tend to newspapers DB fill up quickly.  Full should be good for vCloud Director, except that it's rather talkative, depending on your deployment.

  The other part is that recovery time is difficult because of dependencies on the State of vSphere (if you had to recover as well).

  Backup is not only vCloud, but something else it interacting with in the environment.  If do you still complete and backups of delta for vCloud and vCenter simultaneously, then there is less of a problem.

• RESTORE DATABASE OR DATABASE RECOVERY

  Hi all
  
  10.2.0.4
  SLES 11
  
  I want to restore my RMAN backup.
  
  I have run this command:
  

  RMAN> restore database;
  
  RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
  RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
  ORACLE error from target database:
  ORA-03135: connection lost contact
  
  Starting restore at 30-APR-13
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-00601: fatal error in recovery manager
  RMAN-03004: fatal error during execution of command
  ORA-03114: not connected to ORACLE
  RMAN-03002: failure of restore command at 04/30/2013 16:13:50
  ORA-03114: not connected to ORACLE

  Why does say not connected to oracle, when I'm simulating a crash of the database... which means no db oracle is in place.
  
  
  Thank you
  
  zxy

  Step 1: RMAN > Connect target /.

  Step 2: Startup nomount pfile =''

  Step 3: restore the backup control file

  Step 4: change the database editing

  Step 5: restore the database

  Step 6: restore the database

  Step 7: Open database resetlogs;

  Thank you

• Database recovery

  Hello..
  
  I am new to Oracle RMAN backup and restore. I created a table and backs up the entire database. now, I dropped the table. When I restore and recover the database of
  
  RMAN > RESTORE database;
  RMAN > RECOVER DATABASE;
  
  the table is not recovered but if I make the point in time of recovery of
  
  RMAN > RESTORE DATABASE until TIME 'SYSDATE-1/24;
  RMAN > RECOVER DATABASE until TIME 'SYSDATE-1/24;
  
  the table is retrieved. I wants to recover normally. What should I do?

  you have to perform specific recovery time until when the table is available that is why cmd 'RESTORE DATABASE UNTIL TIME 'SYSDATE-1/24' '; works in your case.
  However if you perform a recovery full recovery of database and database back to the stadium even when the table was dropped and its not available in the database.

  Therefore, perform incomplete recovery.

  Thank you
  Christian Christmas Pal Singh

• Streams and database recovery

  If I have a downstream server which fails, and I can only restore to an earlier point in time, the upstream server 'Resync' with the downstream server? As long as it's done before something like the archived Redo Logs are still on the server?
  
  I don't know how to find the documentation for it specifically. At least if I don't hear it's possible and I hope that even a feature easy to use water courses, then I'll know it's worth digging through manuals.
  
  Thank you
  -= Chuck

  Hello

  Maybe this link could contribute to resynchronize the downstream database after a Point-in-time recovery:

  http://docs.Oracle.com/CD/E11882_01/server.112/e10705/man_gen_rep.htm#i1011204

  Hope this helps.
  Best regards
  Jean Valentine

• Backup of database recovery question

  Hello
  
  On Standard edition 10.2.0.1 (Linux EL5 X 86 4 - bits), try to configure the standby.
  
  Any installation is complete for database standby standby and mounted, but applying the newspapers archived standby does not cause under question.
  
  Destination the Archives of the journal mode standby and its format are as follows.
  
  Log_archive_dest_1 string location = / archive/adplprod/arch
  log_archive_format string %t_%s_%r.dbf
  
  All sleep trying to recover the database (while trying to apply the archived log files), we get error below.
  
  SQL > alter database recover base_de_donnees auto sleep;
  ALTER database recover basic auto sleep
  *
  ERROR on line 1:
  ORA-00279: change 1065161134 September at 30/01/2012 17:32:34 needed for thread
  1
  ORA-00289: suggestion: /archive/adplprod/arch/1_1771_773019879.dbf
  ORA-00280: change 1065161134 thread 1 is in sequence #1771
  ORA-00278: log file ' / archive/adplprod/arch/1_1771_773019879.dbf' is no longer
  necessary for this recovery
  ORA-00308: cannot open archived log
  ' / archive/adplprod/arch/1_1771_773019879.dbf'
  ORA-27037: unable to get file status
  Linux-x86_64 error: 2: no such file or directory
  Additional information: 3
  
  As you can see, the file is archive/adplprod/arch1_1771_773019879.dbf, but oracle is looking for archive/adplprod/arch/1_1771_773019879.dbf, that is, an extra / in the path. How to limit this path, including / and oracle use the file. Pls help.
  
  Thank you

  >

  Log_archive_dest_1 string location = / archive/adplprod/arch
  log_archive_format string %t_%s_%r.dbf

  set:

  Log_archive_dest_1 string location = / Archives/adplprod
  log_archive_format string arch%t_%s_%r.dbf

• The database recovery failed

  All,
  
  I do a restore backup for the RAC database to single instance on another node. I am getting following error.
  
  Version: 11.2.0.2.0 platform: Linux
  

  SQL> recover database using backup controlfile until cancel;
  ORA-00279: change 10397075928425 generated at 12/09/2011 02:47:38 needed for
  thread 1
  ORA-00289: suggestion :
  /mounts/dprd_restore/owctst/arch/owcprd_arch_R745240531_T1_S19607.arc
  ORA-00280: change 10397075928425 for thread 1 is in sequence #19607
  
  
  Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
  /mounts/dprd_restore/owctst/arch/owcprd_arch_R745240531_T1_S19607.arc
  ORA-00279: change 10397075928425 generated at  needed for thread 2
  
  
  Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
  CANCEL
  ORA-10879: error signaled in parallel recovery slave
  ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
  ORA-01195: online backup of file 1 needs more recovery to be consistent
  ORA-01110: data file 1:
  '/mounts/dprd_restore/owctst/oradata/owctst/dbfiles/system01.dbf'

  Can you please advice on this?
  
  Thank you.

  Usually, you need to specify the redolog online there in the last file to work around this error.

  ----------
  Sybrand Bakker
  Senior Oracle DBA