Migration assistant did not what I expected

Similar Questions

• iTunes update errors with the following message appears: there is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected.

  iTunes error update

  I am trying to install an update to iTunes on my laptop and find the folowing part-way through the installation error:

  "There is a problem with this Windows Installer package. A program run as part of the set up did not complete as expected. Contact your provider to support personal or package. »

  I got iTunes for 3-4 years now and have always been able to install updates successfully, so don't not sure what is the problem.

  I tried msconfig and changed the boot process, so it includes all of the non-Windows elements, as suggested on the Microsoft Web site, but that has not worked.

  Can anyone help?

  Thank you

  The instructions were to contact the vendor of the package. This isn't iTunes, Microsoft.

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• Windows Installer error there is a problem with this windows package install. a program run as part of the set up did not complete as expected "during the installation of Itunes

  Original title: problem WIndows Installer to install the latest version of i tunes

  When I try to install the latest I tunes version 10, I get a message "there is a problem with this windows package installer. a program run as part of the set up did not complete as expected "the downloads version, but will not be installed."  How can I fix?  I have an earlier version, but I need to update to use my i pad.

  Hello

  You can try the steps of troubleshooting provided in the link below and check if the problem persists.

  Problem installing iTunes or QuickTime for Windows

  http://support.Apple.com/kb/HT1926

  To get help on the issue, you can get in touch with support for ITunes.

  http://www.Apple.com/support/iTunes/

• Windows Installer error - "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected.

  When trying to install a new control software and data package my Hyperion charger I get this error message "there is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".

  ---------------------

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• When I click on the menu option 'Open Site' he does not what to expect, is rather shows the desktop on my iMac.

  When I click on the menu option 'Open Site' he does not what to expect, is rather shows the desktop on my iMac.

  What you see is exactly the way it should work. Open the site your Finder window opens, so you can access the .muse file you want to open. Recently opened (just below it) will show the list of sites you have worked on lately. I don't know what else await you.

  I should probably see a list of site temp I want to open or DELETE?

  No, Muse or any other program besides will not open a file that you do not select to open. To remove a site simply open Finder on Mac go to the location of the file and delete it in one of the many ways that a Mac allows you to do.

• Use the PC migration assistant does not see the imac

  My sony vaio does not see that the imac even thogh the imac can see the sony

  Hi Andrewmenzies1954,

  You can see the below mentioned Knowledge Base article and check.

  How to use the Migration Assistant to transfer files from another Mac

  http://support.Apple.com/kb/HT4413

  In addition, you can also contact the Apple Support or post your issue in the Apple Discussion forums.

• Update is not what I expect.

  Hello!
  
  UPDATE yhhapu:
  SET h.ashu_kala =
  (By SELECTING b.grossarea IN bubuilding b
  WHERE h.id = b.id AND h.ashu_kala > b.grossarea);
  
  I was wondering why this update changes all the data ashu_kala to null. This is not what I'm trying to do.
  It seems to update all rows to null. But it suppose to be the values of grossarea.
  
  What should I do about it!
  
  Thank you! OV

  You did not specify a WHERE clause, which would limit the number of rows updated.

  Some examples of UPDATES with a WHERE clause:

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e10592/statements_10008.htm#i2189756

• My hidden icons show that indexing is done on a daily basis on my pc and I did not what it is and why it is on and how to disable

  There are thus several weekas, I was on a virtual cat call w/verizon and a rep he was helping me with VISS I had problems, he had to uninstall then install again from this virtual cat took my internet connection would constantly freeze up on top of me, and it would read "internet does not" well I uninstalled VISS once again and its helped the problem , but now I'm not protected against spam, etc, however, is about the same time I noticed this indexing icon in my taskbar and its indexing still I don't have any idea what it is or how he became active. Please notify

  Hello

  If you are running XP SP3, in lieu of VISS, try Microsoft Security Essentials

  The Indexing Service indexes files to do research of the faster hard disk. Index of activity is expected to decline after a day or two (after that indexing is complete), and there should be no loss of performance.

  If you want to disable the Indexing Service, see the instructions here:
  http://www.mydigitallife.info/turn-off-and-disable-search-indexing-service-in-Windows-XP/

  Don

• Out of the object, it is not what I expected.

  I am rewriting a script and I'm having some problems with the release, the partial script is below.

  1. something function {}

  2 $ESXiVersion = $AllESXiHost | Foreach {Select @{N = 'Version of vSphere';} E={ $_. Name}}, @{N = 'Count'; E={ $_. County}}}
  3. $ESXiModel = $AllESXiHost | Model group | Select @{N = 'Server model'; E={ $_. Name}}, County
  $ESXiInfo = new-Object - TypeName PSObject
  $ESXiInfo | Add-Member - MemberType NoteProperty-name ESXihostCount-value ($AllESXiHost) .count
  7. $ESXiInfo | Add-Member - MemberType NoteProperty-name ESXiVersion-value $ESXiVersion
  8. $ESXiInfo | Add-Member - MemberType NoteProperty-name 'Model' - value $ESXiModel
  Write $ESXiInfo. FL

  }

  I tried some things, so the line 2 (goes to line 7) is an experience and does not produce anything, but when I write it as line 3 (goes to line 8), I get the same results.

  When I call the function, line 2 (line 7 out) and 3 (output line 8) show similar to information

  {@{Model server = server;}} Count = 7}, @{model = Proliant Server;} Count = 1}}

  I'm guessing that the output is a hash table, but of course I want the "@ {" removed from the script, but I don't know how.  A colleague suggested I use a foreach statement, but I don't know that I did it incorrectly.  If I register, say line 3 as below:

  $iHost = get-VMHost | model group | Select @{N = 'Server model'; E={ $_. Name}}, County then the output seems well

  I see it's a GroupInfo object... ok, I can go on and on for something simple.  How can I remove the {@{}} my script, so it looks better when released?  Thanks in advance.

  HI: DZ1,

  Sorry for the confusion between you. Please forget this GetEnumerator, you don't have to use it at all. It was my mistake. I don't know why but I thought that's a hash table and you use getenumerator to split large hashtable of unique items... I don't know what I was thinking then. Ah sorry this one.

  Your line

  1. $ESXiVersion = $AllESXiHost | Select @{N = 'Version of vSphere'; E={ $_. Name}}, @{N = 'Count'; E={ $_. County}}

  is wrong, I guess. If you want to get the esxiVersion you should not query the property 'name '. Name is the name of your host esxi as, esx123.local.biz, but it does she hold the version name. To get esxi version you must use the property named 'version' of the vmhost object.

  I don't know what you want to count by this line because:

  $AllESXiHost | Select @{N = 'Version of vSphere'; E={ $_. Name}}, @{N = 'Count'; E={ $_. County}}

  first of all it will not count anything because you're the count() on vmhost object method that isn't a table or something like that type, which could be counted.

  It must be remembered that, in your infrastructure there may be several versions. If you have to do that many heads of charge esxi as many versions as you have in your VC.

  This is why I have proposed to put as many version properties as they are.

  If this MAIN BIG object for statistics will hold a property for counting version 3, version 4 and version 5 for example. In order to count the individual versions, you have to divide your esxi by these versions boxes

  Then

  $AllESXiHost | Group-object - property

  consolidate all hosts of esxi by their version number, you will receive as many objects as it has versions

  You should see something similar to this

  Name of County
  ----- ----
  1 3.5.0
  2 4.0.0
  3 4.1.0

  So, we have identified 1 host with version 3.5, 2 guests with version 4 and 3 guests with version 4.1

  So everything depends now how you wish to put this information inside your statistics collection of $esxiinfo objects

  I have proposed to put 3 different properties, or having 1 House containing an arry.

  IF you want to have the simple text, and you do not want to calculate it later anyway, you can just make 1 chain and join these chains in a big 1.

  $versions = $AllESXiHost | Group-object - property Version | Select Count, name
  $versions

  Name of County
  ----- ----
  3 4.0.0
  7 3.5.0
  6 4.1.0'

  I don't know how many versions you will receive. But since you can have mulitple versions I guess you want to distinguish them.

  So I thought you want to learn to add as many properties of the versions in the newly created object.

  2. $ESXiInfo = New-Object - TypeName PSObject

  It's ok

  3. $ESXiInfo | Add-Member - MemberType NoteProperty-name of the Version value ($ESXiVersion |) Group - Version) .getEnumerator (of property). Select Count, 'vSphere Version' 0

  We will add properties to ESXiInfo now, we will add AS MANY PROPERTIES as NEEDED.

  Therefore, add 3 properties

  property Version4.0.0,

  property Version4.10.0,

  Version3.5.0 property

  So instead of the line that we should use

  $versionss | % {Add-Member - InputObject $ESXiInfo - MemberType NoteProperty-Name "Version$ ($_.)"} Name)"- value of $_. County}

  For each version, that we found, we will add new Member to our object of $ESXiInfo. This command will automatically add as many versions they are.

  Your ESXiInfo object will now have new properties

  # 23:01:55 > $ESXiInfo | GM

  TypeName: System.Management.Automation.PSCustomObject

  Name MemberType definition
  ----         ----------   ----------
  Equals method Boolean Equals (System.Object, obj)
  GetHashCode method int GetHashCode()
  Type of the method GetType GetType()
  String the ToString ToString() method
  Version3.5.0 NoteProperty System.Int32 Version3.5.0 = 7
  Version4.0.0 NoteProperty System.Int32 Version4.0.0 = 3
  Version4.1.0 NoteProperty System.Int32 Version4.1.0 = 2

  So you can get

  # 23:02:55 > $ESXiInfo. 'Version3.5.0 '.
  7

  I think that I have explained your 3 lines.

  Now if you really want to have an additional property only 1 for versions, you can do it like that.

  line 1

  $AllESXiHost | Group-object - property Version | select count, name | % {[table] $versionss2 += 'Version $($_.)} (Name) = $($_.) County)"}

  This line will create the variable $versionss2, which will be used to maintain information about the versions of esxi.

  Lets first get the versions and their count but store this information in a simple table.

  I # 23:05:20 > $versionss2
  Version 4.0.0 = 3
  Version 3.5.0 = 7
  Version 4.1.0 = 2

  OK, we have 3 rows in our table, but you want to have only 1 property for versions so join us just these lines.

  So we call add-member only ONCE, this time:

  Add-Member - InputObject $ESXiInfo - MemberType NoteProperty-Name 'Esxi Versions' - value [string]: join(',',$versionss2)

  We are joinng all loose our table with versions with comma.

  Take a look how your object will now look like:

  # 23:10:55 > $ESXiInfo | FT - AutoSize

  Version4.0.0 Version3.5.0 Version4.1.0 Esxi versions
  ------------ ------------ ------------ -------------
  3 7 122 version 4.0.0 = 3, Version 3.5.0 = 7, Version 4.1.0 = 2

  first 3 columns were the first method, fourth colum is the new approach. So if we would not include even the former approach, it would look like this

  ESXi versions
  -------------
  Version 4.0.0 = 3, Version 3.5.0 = 7, Version 4.1.0 = 2

  And for the model, you do exactly the same thing, but instead measure the version property, you need to measure the model.

  I hope that is more clear.

  Greg

• control design and simulation in a loop the final amount not what I expected

  Hi the LabVIEW forum members.

  I have a frame control and Simulation in which I am simulating a regulator in closed loop (see file attachment).  When I apply a step of the input unit that I expected to get the answer to deposit at the unit, i.e. the stage of entry being the set point.  However, he moved to about 0.625.

  Can someone point me in the right direction please?  I'm obviously doing something wrong here.

  Kind regards

  OK guys,

  Cancel my last post, I found my mistake, it was the P + I control shape, I made a mistake in the Integral control action transfer function where the Integrator not arrive to integrate an error.

  Kind regards

• E10 Campaign vs program Builder - not what I expected?

  We just moved to e10 upward after being on e9 for a looooong time. So forgive me if I'm not seeing things correctly.

  If I get this right, you can't do a little data manipulation in the Web of campaign? For example, if a contact opens an e-mail, update the status of Member of campaign response, change lead status, etc..

  You should always use the program for this generator? So tell me why I use the canvas of campaign? Seriously. Almost every campaign I was running must come out of a program. So now I have 2 entities in Eloqua to maintain?

  How to guide my thinking on that? Are campaigns are basically just a place to park my property such that it allows combined campaign? So it's NOT different team e9?

  Talked to the (very useful as usual) support and hit the support site. The answer is Yes, do any manipulation of data, etc., you must use the program generator. I voted up to the feature request on the ideas, please do the same if you feel same - the idea is called "feature program Builder in E10 campaign canvas."

• Extracts are not what I expected... Any ideas to achieve the desired results?

  I have about 340 pages spanning more than 100 documents (for possible use with Digital Publishing Suite).

  I would like to design content that will be used in a similar way to the master page content I would like to cover several documents, but be modifiable and update all pages.

  Excerpts from old in GoLive (long ago) used to allow to make changes to the excerpt of master, and these changes would update all pages connected with the content has been fixed.

  Is it possible in InDesign to connect the content of the document in this way? It doesn't have to be extracted. Any method or tool will do.

  Thank you

  Picture is worth a thousand words:

  

  And Yes, it is one thing to InDesign, but I wanted to share the DPS Forum in case you need something specific there.

• Where is migration assistant?

  Just updated.

  http://www.Mozilla.org/en-GB/Thunderbird/features said "under the Help Menu, you can find the Migration Wizard to help you configure Thunderbird as you want. If you liked the old toolbar of Thunderbird 2, you can quickly make this change with the Migration Wizard. "Migration assistant is not listed under help.

  With the help of v24.6.0.

  Migration wizard has been removed for a long time, but I guess that features GB page has not been updated to match that of the United States.

• On Firefox 14.0.1 cannot see all the photos on Facebook, did not find any blockage in defenitions

  Since the last update of firefox, I think, I don't see any picture on facebook.
  I have seen no sites blocked on tools > contetnt > download images or
  the button in the address bar of the site > more information

  Hi guys,.
  Well problem was solved: Apperantly settings of the account in Facebook itself has been set on safe navigation. It was like that for months... I did not what has happened in the last few days, but after this everything worked...
  Thank you for your efforts!

• I bought a Microsoft wireless router today, but it did not come with a cd. What should I do?

  I bought at the flea market, so obviously did not expect, but when I went on the site, looking for a way to get a CD, nothing came. Anyone know how I could do to get one?

  Hello

  · What is the model number of the router?

  You can check the link below: how to download updates that include drivers and hotfixes from the Windows Update Catalog: http://support.microsoft.com/kb/323166