Migration Forms 6i to windows 2003 and linux redhat 5 32-bit

Similar Questions

• Satellite A110-180 - update of the Bios for Windows 7 and Linux

  Hello

  I want to change the following settings in my bios on my laptop satellite A110-180
  * AHCI for SATA
  Disable the IDE

  But none of these options.
  So I thought that maybe I should update my bios.
  I found the download page, but there are 2 options: Windows Vista or NO vista, but I want to dual boot windows 7 and linux.

  Which one should I download, or is there another option to change the settings?

  Thank you!
  Bart

  Hello

  Satellite A110 does not support these options (SATA AHCI).
  The update of the BIOS will not help you!

  Linux is not supported and therefore, you will not find any special BIOS for Linux OS!

  The two BIOS updates are for Win Vista or OS independent.
  Therefore, if you use other than Vista OS then you should throw the update of the independent BIOS to the BONE!

  But as mentioned above; both options will not appear after the BIOS update!

• Active Directory and domain controller on old customer Windows 2003 and Windows 7.

  Hi all

  I have Active Directory and the domain on old Windows 2003 and Windows 7 client controller. I enabled "User must change password at the next logon" for the customer user on AD account.

  When the user tried to connect to Windows 7, after that they have got the change password screen and type new password, then they received message "the user password must be changed before logging on the first time," user get password screen change again, then they get the same massage. Looks like he's going to loop and user cannot change password and connect to the computer.

  Hello

  To help you with your concerns, you can see the article below:

  Error message: the password must be changed before logging on the first time

  Let us know how it goes.

• Using BCD for dual boot Windows 7 and Linux on two separate hard disks

  I scoured Internet for weeks and weeks trying to answer this question with still no success whatsoever.

  What I want to know is:

  Is it possible to use the BCD to boot Windows 7 and Linux, with Windows 7 installed on the hard drive of 1 and Linux installed on the hard disk of 2?  If so, how do you prepare in advance Linux, IE Grub must be on the partition root of Linux or should it be on the second hard disk MBR and what are the bcdedit commands necessary to add an entry for Linux for the start menu in Windows 7?

  Could be read more the real problem before burn.

  Someone wants to BCD of Windows to load * since a brooch * for the ACB or MBR on the operating system on the other drive.

  Unless there is a setting BCD undoc, it cannot manage other partitions on the same physical axis starting it is on.

• How much better the partition of the HARD drive for dual boot: Windows 8 and Linux

  Hello

  I am a newbie in Windows 8, linux, Partition...

  I want to use my new laptop with windows 8 pre-installed on the following:

  Create a Dual Boot Windows 8 / Ubuntu
  Create on my drive C (single disk on my laptop):

  * a partition for the system
  * one for Windows 8
  * one for data and
  least for Ubuntu OS

  My goal is:

  -to install VmWare on Windows 8 and run Splat Checkpoint with virtual machines to make the FCTC laboratories.

  to install GNS3 on Ubuntu for CCNP Labs but with GNS3 to access the files in the data partition

  I have a Toshiba Satellite with 750 GB and 8 GB of RAM.

  According to you, what is the best size for my scores?
  Is there a better way to partition my C drive on my goal?

  Best regards

  I don't know if this is the right section, sorry for that. Feel free to move this thread in the appropriate section *.

  I think the size of partitions depends of the you want to use and install other software.
  So if you have a lot of software which runs under the Windows System I recommend to choose a larger size to win 8 partition.

  However, given that you have a 750 GB HARD drive, you could take 200GB for Win 8, 100 GB to Linux and the rest of the HARD drive size, that you can use for data.

  By the way: I found Nice YouTube video how to create a dual boot using 8 Win and Linux http://www.youtube.com/watch?v=E_Yd2jK-7Jg

  Welcome them

• Dual boot with Windows 7 and LINUX - Tecra A11 (PTSE1A - 005-00L)

  Hello

  I bought a new Tecra A11 computer laptop running WIN7 Pro. I want to install LINUX also. This means that I want to run my laptop in dual boot Win7 Pro/LINUX (a Distributor). Please tell me how to do this.

  There are 5 partitions on the HARD disk:
  1 active, recovery partiton 1.46 GB (without drive letter)
  2. principal asset C: start 145,04 GB (NTFS)
  3. active logics E: 78,13 GB (NTFS)
  4 active logical F: 64.25 GB (NTFS)
  5 primary Partition 9.2 GB (no drive letter, the unknown application)

  Hey, I need because I was admitted to a course of RHCE (Red Hat Certified Engineer)

  Please help me

  Hello

  I can't give you a step by step explanation, but most distributions offer today a possibility to coexist with Windows.
  When installing the unused free space will be taken by Linux (with the consent of the user of course!)

  What exact configuration you need is impossible for someone else to say, but I would say to make the space occupied by the F player available for Linux.
  You seem to have of enough space for Windows and Linux operating system doesn't have much.

  Some thoughts about setting up your score:

  I touch NOT 1,2 and 5 no matter what. They are your system and a system of internal partitions (recovery and data environment) and wouldn't it be fun to lose.

  1 active, recovery partiton 1.46 GB (without drive letter)
  2. principal asset C: start 145,04 GB (NTFS)
  3. active logics E: 78,13 GB (NTFS)
  4 active logical F: 64.25 GB (NTFS)
  5 primary Partition 9.2 GB (no drive letter, the unknown application)

  Then choose a Distro (Ubuntu, Mint, Fedora and OpenSuse - suggestion Fedora will be as close as possible associated with RedHat) that will guide you in the steps to allocate space for Linux.
  I suggest however to remove the disk F in Windows for Linux does not start from resizing all partitions.
  I do not know which works perfectly, but will just take time, and will most probably remain pretty useless drive F.

  If you have valuable data on your device, make sure to save! No software comes with warranty :)
  Last but not least - make 100% sure to create a collection set using the Toshiba Recovery Media Creator before you start the installation of Linux.
  If something goes wrong you have the opportunity to put the unit in factory condition.

  Good luck and keep asking you if you need extra help!

  Tom

• Error message on Windows 2003 and Satellite M40x-184

  Hello
  my laptop is Satellite M40x-184
  with Os Xp Home edition
  I want to insatall a second operating system which is Windows 2003
  but when installing it, came a problem and gives me a blue screen with this message:

  "' hardware malfunction nmi parity check / memory parity error is interrupted" "

  Please tell me how can I install 2 Os xp home edition and Windows 2003

  Thank you

  Hello

  This error message can occur if a hardware component malfunctions, or if it has installed the damaged or incompatible drivers.
  To resolve this issue remove additional memory modules that are installed on the computer, leaving only the minimum required for the computer to start and run Windows. Restart the computer to see if the error messages persist.

  This issue has been described on the Microsoft Web site.
  Please see this site:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315223&product=winxp

• Install PeopleTools 8,53 Linux question: Windows Client and Linux Server suite

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture. Database server is Dabase Oracle 11 GR 1 material. Operating system is Oracle Linux 5. I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually using Starter named PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  Then, we perform Data Mover script in a Windows Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.
  I have installed Oracle Database 11 g 2 client for 32-bit Windows in my Windows XP 64-bit. The installed directories are below:

  Server Linux machine:
  Oracle_Home: / home/user/OracleDB_Home
  ORACLE_BASE: / home/user/OracleDB_Base
  PeopleTools 8.53: /Linux/PT8.53

  Windows XP Client computer:
  Oracle_Client: /OracleDB_Client_Install_Directory
  PeopleTools 8.53: /Windows/PT8.53

  
  What machine installed PeopleTools 8.53 in customer Windows, it is a step:

  Select the location of the connectivity program directory:

  What directory to select? We select the directory ' / home/user/OracleDB_Home "on Linux?
  Oracle Client tools in Windows XP "Start" menu is used to connect Windows XP with Linux?

  Thank you.

  The answer is «Yes, they use the tools of the Oracle Client installed on Windows XP.» The longer answer is that these client tools communicate with the Linux using TCP/IP database, etc., and exclusive Oracle TNS 'protocol '. This network communication usually occurs on port 1521, but you can configure your server to database for listening on different ports. Alternatively, you can do all kinds of fun things with forwarding port, tunnels, VPNs, etc. for the use of different ports and security protocols. There is much more than that, but basically these Oracle client tools provide utilities communication (drivers) used by PeopleSoft to connect to the database on Linux via the network.

• Windows 2003 and Satellite M45-S335

  Hello
  I bought a toshiba a few months ago, I want to know if windows 2003 is now supported on this subject? I once installed, but I had a problem of drivers, the improvements are there in this?

  Thank you very much
  Bilal.

  Hello Bilal

  As much as I know XP units don't are not supported to W2003. For W2000 maybe but I have heard that with W2003 is not so easy to configure the device perfectly. Try to find out material manufacturers have some drivers on its support page.

• I'm looking for a manual form PDF for Windows Vista and one for Windows 7 ULT.

  Hi Tech, representatives and mods,

  I'm looking for a file PDF instruction manual for Windows Vista and one for Windows 7 ULT.

  I am trying to solve some problems on the PC of my mother for him and she not Vista operating instructions supplied with the installation of the plant on his Dell Inspiron 531.

  Also, because of irreparable corrupt software problems, Microsoft technicians have ordered me a Windows 7 installation disc that came in the mail, but there is no manual and I would like to know the procedures of installation and the new UI so I install it.

  Anyone know where I can download manuals of instructions PDF for Vista or Windows 7? ... can't find on the Microsoft Web site, but maybe I can't find them.

  Thanks for any help,

  NuMetro

  
  

  Hi Aziz,.

  I appreciate of course send you these links to the instructions for the installation of 7 and Vista... I will use them when trying to fix computer Vista my mother sick.

  But it turns out there are some out there in free download e-book/PDF manuals, and one for Windows 7 is quite comprehensive, edited by a guy named Rich Robinson on http://mintywhite.com/books/ ... See the response, copied below, I got "JacK MVP" when he replied to my post on the Windows 7 forum...

  

  _________________________________________________________________

  Jack MVP MVP Moderator

   

  Hello

  Look at this page, http://mintywhite.com/books/

  You need to register, but it's good and free courtesy of Microsoft MVP.

  _________________________________________________________________

  It's a little complicated to register on this site... I click on a link to a book, then on the page following, I get my email address, then I get an email confirming my registration, by which I can get an e-mail newsletter every day with a new password to download e-books. If the newsletter has already been sent to this day there, I click a 2nd link in this email in order to receive another email with the password... then by clicking a link in the 2nd e-mail, I get to the page where I did enter the password... so I can download e-books... as easy as 1-2-3... 4-5-6-7-8-9-10-11...

  TIP: the password appears to be the same thing every day, or was yesterday and today it's 'mintywhiteBooks '... How sneaky.

  For a minute there, I thought that this site was a kind of lure because on the page "to subscribe/instructions", where I get my e-mail, there are 2 jpeg images that resemble password fields and links, but they are not... I'm not sure of what those who are for.
  This mintywhite.com seems to be quite the site for amateurs and Windows technicians.
  Thank you
  Enjoy,
  NuMetro

• Windows 2003/2008 server Enterprise Edition 32-bit RAM OS compatibility issue.

  We just bought 2 servers architecture 64-bit with 16 GB RAM on each server blades. seller want to install windows server 2003/2008 Enterprise Edition 32 bit OS on these because of the compatibility of the applications server computers. I heard that windows 2003 32-bit server supported only 4 GB of RAM. So, in this scenario, another 12 GB of RAM will be unusable or full 16 GB of RAM will rely on this machine so install us windows 2003/2008 server enterprise R2 32 OSi. Also say us no other solution.

  Hello

  Your question of Windows 2003/2008 Server suitable for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• I updated to windows 10 and installed items 14 64 bit.and is set by default to open .jpg files. When I click on an element of the photo opens but the photo is not. Then I have to open it manually. Any ideas why and how to sort gratefully receiving

  I have updated to 10 Windows and installed the 14 64-bit elements and makes it the default program for opening .jpg files. When I click on an element of the photo opens but the photo is not. Then I have to open it manually. Any ideas why and how do the sorting gratefully received

  Sort problem! I need the Adobe folder and use the Adobe Photoshop elements 14 .exe 'association' as my default file

• WLS 10.3.2 installation on Linux Redhat 5 64-bit

  Anyone who has managed to install WLS 10.3.2 to deploy ADF 11.1.1.2 applications on Redhat 5 64 bit?
  
  I did it with WLS 10.3.1 and it did not work well use Sun JDK 1.6_16 64-bit.
  
  With WLS 10.3.2 is the problem: -.
  
  I use the Sun jdk even than the one that I use and that worked well with the 10.3.1 Configuration.
  
  Field 1A was created with config.sh
  2/WLS server started avec./startWeblogic.sh (from Middleware_home/user_projects/domains/mydomain/bin) and the node Manager launched (from de./startNodeManager.sh in the middleware_home/WLS1032home/server/bin).
  3 / a new machine with other guy was created
  4 / a new server has been created and associated with the new machine
  5 / JRF model has been applied to the server using Enterprise console manager
  
  When I try to start the new Weblogic console server or Enterprise Manager console, I get an OutofMemory error: PermGen space in the server log output.
  
  I tried to restart weblogic domain with the new memory settings by defining them in the file setDomainEnv.sh for the domain (in Middleware_home/user_projects/domains/mydomain/bin), but nothing helped.
  
  Someone at - he succeeded with own memory settings?
  
  Thank you
  Jean-Marc

  Hello

  It seems that the settings are not applied correctly... U confirmed that the settings are applied by looking at the server OF THE file/server Log...

  I use Sun. JDK 1.6_16. If you get this error for server... and you start your managed server from AdminConsole... using nodemenager, then try the following options as well...

  Option - 1).

  Connect to AdminConsole--> environments-. Servers---> YourManagedServer---> Configuration (TAB)---> ServerStart (sub-tab)---> Arguments: (TextArea)

  Please add your settings here - Xmx1536m-Xms1536m - XX: MaxPermSize = 512 m

  ----------------

  Option - 2).
  If before also has not work then please try to add the 2 following in the file 'nodemanager.properties '.

  StartScriptName = startWebLogic.sh
  StartScriptEnabled = true

  Then try to start your managed server.

  Thank you
  Jay SenSharma
  http://jaysensharma.WordPress.com (WebLogic wonders are here)

  Published by: Jay SenSharma on February 26, 2010 13:52

• Problem with forms 11g with Windows 2003 Server

  Hi friends,
  
  I tested compatibility of oracle 11g in various version today, I installed in windows server 2003 has increased with the same installation that I did for my windows XP that has worked well. Now, I started the server http for forms and then opened my application forms and create a simple forms when I press the 'Run the form' button all I get is page not found that any suggestions would be welcome.
  
  I've already updated my java and it is a new installation of forms 11g.
  
  Kind regards
  Manoj Chakravarthy

  make one
  opmnctl startall
  of $OI/bin as well and check...

• now that I put to the top of my microsolft account how do I set up my windows anytime update key or nwhere is because I downloaded windows 2003 and need the key to upgrade to windows 7

  I downloaded office 2003 they needed the key to upgrade for windows from my computer to my microsft Office Access and upgrade and treat the new additon of windows. You can help me get the upgrade to windows 7 active so I can use the downloads.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012