Migration of BR between env

Similar Questions

• Is it possible to migrate ESXi host between data centers, if so please provide a brief not

  Hi friends,

  1. is it possible to migrate ESXi host between data centers, if so please provide a brief walking distance.

  2 can we perform vMotion and Storage vMotion while ESXi is turned on.

  3. is it possible to extend the VMDK disk while it integrates snapshots in it.

  Best regards,

  Sirot Vijay

  Yes the vmotion and svmotion works but one by one.

  1 - vmotion is posssible to power on State, but you can't svmotion the vm simultaneously. The storage will remain same

  2 svmotion is also possible to power on the State, but you cannot vmotion virtual machine simultaneously. the host will remain the same.

  3 vmotion and svmotion is possible together when the vm is off power. the host and storage can be changed simultaneously on this State.

• Is it possible to do a migration of LCM between 11.1.1.2 and 11.1.1.4 to EMP?

  Hi all
  
  
  Is it possible to do a migration of LCM between 11.1.1.2 and 11.1.1.4 to EMP?
  
  Thank you.

  As I said, I didn't take (literally) the product formerly Analyzer since 2001, but what I remember was to create a connection to a database and then the construction of reports in this regard. I'm going to guess that WA has not changed that much.

  The error message that you noted:

  org.springframework.dao.DataAccessException: error creating object of essbase database.

  This error would not exist if this database connection (well, I'm probably using the wrong terminology, but you get the idea) existed on the target before the migration.

  It could also be useful to check the Support of Oracle to see if this is a known issue.

  Kind regards

  Cameron Lackpour

  Published by: CL 4 December 2012 12:00
  PS useless Info - I had the training in the WiredForOlap of 'seat', which I was sure 100% was a former dentist House converted to a software company seat. It is clear that their model worked like that had to be some time in the mid-1990s.

• Migration of VMs between data warehouses

  I added a new data store to a vSphere 5.5 infrastructure and created a few scheduled tasks to migrate under tension on the virtual machines between data warehouses.

  The migration is successful, but on the source data store, I still see a lot of files for some migrated VMs, including the .vswp and vmware files - xx.log.

  This means that the scheduled task has failed?

  What have I to do to completely move virtual machines?

  Should I turn off and turn on the virtual machine?

  Concerning

  Marius

  Maybe this file are simply zombie files, generated cause an improper shutdown of the VM (take a look at the date of creation/modification of files). You can try to rename these files, if you are able to do so, these files aren't really in use. After you rename and make sure that the virtual machine works as expected, you can manually delete the files.

• How to migrate the relationship between two different epm versions.11.1.1.4 - 11.1.2.3

  Hello, we intend to make an hors-place upgrade to our 11.1.1.4 to 11.1.2.3 environment. The only thing stopping us is the question of how to migrate 11.1.2.3 11.1.1.4 reports. We have already considered the following options
  
  (1) LCM, LCM is taken in charge only between the same versions are at - it another way.
  
  (2) I know there is an option to export reports in the workspace, but the disadvantage that is that each report must be exported at the same time (atlease how it is in 11.1.1.4). And we have far too many reports to make them one at a time.
  
  (3) I have also considered the possibility of replicating data in the repository Directory (HYPERION_HOME\products\Foundation\workspace\data\RM1_Servername) of 11.1.1.4 to be used as the repository directory in the new version, assuming that reports and data analysis means the reports too. However after doing this I have connected to the new environment and could not see any of the reports.
  
  What other options are there to migrate the reports. Help, please.

  Teddd wrote:

  JohnGoodwin wrote:
  No need to delete tables as databases configured on the vesion as well, if you go to the bottom of the road upgrade data replication then select "Upgrade existing to the current version of 11.1.1.4 databases" when not to configure the database.

  Thanks for the reply of John, I looked at this option. But if I select this option if it does not affect the current 11.1.1.4 environment? Because it is an output level on the spot and we will be maintaining the old environment until we get the new environment to match the old. Thanks again.

  Clone the existing 11.1.1.4 databases, point to the clone.

  Documentation that should be studied - + "You can reuse the data and the existing database, or replicate the database and data to a new machine." +

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Migration of VMs between Clusters

  I'm building a new cluster (esxi 4.1) and want to redesign my network configuration. Current cluster has 1 dvSwitch with 4 natachasery on each host. All the ports are on this 1 dvSwitch. My new cluster has 10 natachasery and I wanted to install 1 - dvS with 2 natachasery for management/vmotion; 1 - dvS with 4 natachasery for VM VLAN; 1 - dvS with 2 natachasery for the feet and the last 2 natachasery for future use.

  My problem is that if I set up my network the way I want on the new cluster how can I go on VMs migration to him without a break in service? Cannot vmotion between dvSwitches.

  You may only create an ESXi host for the purpose of migration. Add the new host at the same time the existing vDS and the new vDS.

  Migrate virtual machines on the host of the migration and then reallocate the VM Networking NIC for the new vDS. Then migrate comments to the new cluster host configured with your end-state configuration. You will have a very short disconnection time when you change the port used by the virtual machine, but as long as it is on the same subnet, it shouldn't be a problem.

  Kind regards

  Paul

• MIgration of the Dev Env Env test BEEP reports

  Hello
  I am Agnes, is currently working on BEEP 11 g. I'm new to BIP11g.
  I have to migrate the datamodels and Dev to Env Testing reports.
  I tried to copy the XDM and OPE dev physical location and the deployment of physical location tests. It does not work.
  
  Please, could you let me know the markets / tool to migrate it.
  
  Thanks for the help.
  
  Kind regards
  Agnes
  
  Published by: 931007 on July 31, 2012 01:19

  same procedure you can archieve the catlog together and unarchiebe in the test environment.

  Simply select the folder catlog left and you will get the options you can do on the left
  Bottom side do archieve and unarchieve in the test environment.

  Give me some useful points.

• Migration of disks between RN104 and RN204

  Can I ask?

  I have RN104 with WD RED (xraid, raid 5 FW 6.4.0). 4x3TB I think buying new RN204 unit.

  Is it possible to migrate all records of old RN104 in new RN204 unit without formatting and copy data?

  Yes.

  1. place a working drive (must not be your table) in the 204

  2 update the firmware on the 204 to 6.4.0

  3. check that the firmware update was successful

  4 power down, remove the disc from work

  5. move your drives in front of the 104 at 204 (keep the same order).

• The Group PS6100XS and Hyper-V Server 2012: migration of storage between LUNS corrupts VM

  Well, I'm puzzled! Summer hit my head against this whole week. Basically, ranging from a virtual machine clustered LUN on the Bay EqualLogic corrupts the virtual machine. Here is my configuration:

  1. SAN 1: PS6100XS 6.0.1 firmware, 2 LUNS configured as CSV, 1 as a quorum disk
  2. SAN 2: FreeNAS 8.3.0, 2 LUN (ZFS-formatted, for what it's worth)
  3. Server 1: Dell R310 running Windows Server 2012 with Hyper-V installed feature. 4 network cards: 2 made team for traffic LAN, 2 for iSCSI with HIT KIT 4.5 configured for MPIO.
  4. Server 2: Old box SuperMicro running Windows Server 2012 with Hyper-V feature installed. 2 network cards: 1 for LAN traffic, 1 for iSCSI with HIT KIT 4.5 installed
  5. Created and all cluster validation tests passed
  Here's what works:
  1. Ranging from a virtual machine of the LUN if there is no activity on the VHDX
  2. Move a VM all LUN the EqualLogic to any number of unit logic FreeNAS or vice versa
  3. Move a VM between LUNS on the FreeNAS
  4. Move a VM between LUNS on the EqualLogic BEFORE I created the cluster (just using Hyper-V Manager, not the Failover Cluster Manager)

  This is what kills the VM whenever:

  1. Create a virtual machine through the Failover Cluster Manager - is not matter which node owns the storage or the VM - tried all combinations
  2. Take an active virtual machine, power and move a LUN EqualLogic to another EqualLogic LUN. The move signals the success, but the VM blue screen at the end of the move will and will no longer be able to start. It's basically fried.

  BTW, I tried also to disable one of the iSCSI NIC on the R310 - what does not help either. Any ideas? I have a case goes with the support of Dell EqualLogic, but so far they have been puzzled. Anyone got something like this works yet?

  OK, after Dell tried about 5 different times to tell me that my setup was not supported (actually claimed that EPA software was not supported!) I finally got someone who gave me workaround: disabling ODX by changing the key "reg" HKLM\SYSTEM\CurrentControlSet\Control\FileSystem\FilterSupportedFeaturesMode from 0 to 1. This "fix", but it also takes one of the most interesting features of the 2012 Server + EqualLogic: ODX! With active ODX, I can move 20 GB in< 1="" sec.="" with="" it="" disabled,="" it="" takes="" around="" 2="" minutes,="" depending="" on="" network="">

• Migration licenses VPN between ASAs

  I have a X 5515 ASA firewall with VPN client licenses. I also have a spare ASA 5510 with a 25 ASA 5500 VPN SSL user license.

  Simple question: can I migrate licenses off the 5510 on 5515 x?

  Thanks for the ideas

  Jim

  Hello Jim,

  No, it is not possible.

  Please contact [email protected] / * / for more details.

  HTH.

• migrate virtual machines between linked vcenters 5.1

  Hi all, is it possible? can I migrate virtual machines to different servers of vcenter ├a the State of related modes? Thank you

  If you want to try to move to a different data store, then you can consider V2V as well.

• EX 3.5 migration of VMS between data warehouses

  Hi all

  Don't know if this is location of correctr but I don't know that it will be moved required

  Scenario - I have a very small server ESX 3.5 with VM hosted on 6. We recently plugged in and set up a SAN and I'm trying to migrate servers from local storage to the San, one at a time. I wrote a script that works on the my ESX 3.5 bed test system, but does not work on my production system. I can't the biggest hard drives on the production system to copy. I run the script as a scheduled task on Saturday afternoon, after I have confirmed that my backup of vRanger connection is completed. I reason I do a "cp" oppsoed suddenly, I like the idea of being able to fall back to the original virtual machine is required. I know that most of the script is working as I can see the original virtual machine power off or not and all the files except the VMDK copied during the local storage to the San.

  I have attached the script that I use as well as the log file which follows from the weekend final run. Can someone please take a look and see what I'm doing wrong? It's driving me crazy.

  Only, we have unique ESX connected to the San, and don't use vmotion. The SAN is connected and (I hope) properly configured.

  concerning

  Gord

  What files are missing? Compare your source files and destination, in the case. You can also watch this http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1000936 Ko to verify if you don't a not build anything.

  Your script worked on another host, it should also work on that one.

  Good luck.

  Concerning

  Franck

• Migrate ESX hosts between vCenters

  Hello

  I was instructed to spend our ESX 3.5 hosts the old VirtualCenter 2.5 to a fresh vCenter 4.0.

  The problem lies in the migration of the ESX hosts without interruption of service. If I had the ability to paralyse an ESX or VMotion their stop, I would have done this, but the old VC2.5 is corrupted and does not allow this.

  I got 2 new boxes, a new box that will become the new VC4.0 and a new ESX 4.0 host.

  My plan is to migrate the hosts of the old VC2.5 to the new VC4.0 to disconnect the current vcenter and then simply adding them in the new VC4.0. After Google'ing a bit, I found that this is however not the easiest of tasks when I can not close the guests during the transition.

  Is it possible, such as disconnection, uninstall or remove users VC2.5 then import the ESX in the new VC4.0?

  Once the ESX is completed in vCenter 4.0, there VMotion and all the fancy stuff that are broken in our current configuration of VC2.5.

  When guests are over, they will also be cleaned and installation from scratch with ESX 4.0 Update 1 + firmware upgrades, which they have unfortunately not been considered with for a long time.

  Thanks in advance for answers!

  a simple disconnect/remove existing vCenter.  Then add the host to the new.  When you add the host, it will upgrade the agent of vpx and reconfigure for HA.

• How to move or migrate whole directories between ASM disk groups?

  Hi all!
  
  I'm playing with Oracle ASM and Oracle Database 11 g R1, I am a student. It's just for testing purposes.
  
  Features of the computer are:
  Processor: Intel Pentium 4 HT 3.00 Ghz.
  Memory RAM: 2 GB.
  Hard drive: 250 GB
  O.S.: Windows XP Professional Edition SP 2.
  
  I installed Oracle ASM, I have created an ASM disk group (+ FRA), I installed Oracle Database and I created a test database. The database works correctly on the ASM disk group. Days, I got help on the initialization parameters, DB_CREATE_FILE_DEST, DB_CREATE_ONLINE_LOG_DEST_1, DB_CREATE_ONLINE_LOG_DEST_2 and DB_RECOVERY_FILE_DEST, according to their function, I created another 3 ASM (+ FILES, LOG1, LOG2) disk groups. There are four initialization settings pointing to its corresponding ASM disk group. As you can deduce, for the time of installation of the Oracle database, I used the ASM '+ FRA' disk group and inside the directories were created: CONTROLFILE, DATAFILE, ONLINELOG, fichier_parametres, TEMPFILE, and the SPFile.
  
  My point is that I want to move or migrate the DATAFILE, fichier_parametres, TEMPFILE directories and the SPFile to '+ FILES', ONLINELOG and CONTROLFILE to '+ LOG1' and '+ LOG2', in this way, the ASM '+ FRA' disk group will contain the Flash recovery area only. What is the procedure for that?
  
  Thanks in advance!

  user1987306 wrote:
  Hi all!

  My point is that I want to move or migrate the DATAFILE, fichier_parametres, TEMPFILE directories and the SPFile to '+ FILES', ONLINELOG and CONTROLFILE to '+ LOG1' and '+ LOG2', in this way, the ASM '+ FRA' disk group will contain the Flash recovery area only. What is the procedure for that?

  Thanks in advance!

  Hello

  There are two approaches that you can use, here are some
  -To move the data file, start the database in State of Mt.
  RMAN > copy datafile '+ FRA/xxx' to '+ FILES1 ";
  SQL > alter database file rename '+ FRA/xxx' '+ fichiers1/xxx. "

  -To move the temporary file
  SQL > alter tablespace TEMP add tempfile '+ FILES1' SIZE 10 M;
  SQL > alter database file temporary '+ FRA/xxx' drop;

  -To move onlinelog
  SQL > alter database add logfile Member '+ LOG1' group 1;
  SQL > alter database add logfile Member '+ LOG2' group 1;
  SQL > modify the members of database drop logfile "+ FRA/xxx."

  -To move controlfile
  SQL > restore controlfile on '+ FILES1' of '+ FRA/xxx. "
  the spfile update to reflect the new location of the controlfile

  See you soon

• problem of migration of customizing one env to another

  I'm trying to move from one environment to the other customization.
  I am able to move only the customization as in the XML file below.
  The problem is the changes to the level of the bean, like I did a few field read only or melted = False, they are not get migrated.
  Please advice.
  

  DECLARE
  BEGIN
  jdr_utils.listcustomizations(p_document => '/oracle/apps/ar/cusstd/srch/webui/ArPrtySrchPG');
  END;
   
  /oracle/apps/ar/cusstd/srch/webui/customizations/function/AR_ARXCUDCI_QUICK_VIEW/ArPrtySrchPG
  /oracle/apps/ar/cusstd/srch/webui/customizations/function/AR_ARXCUDCI_GATEWAY_VIEW/ArPrtySrchPG
  /oracle/apps/ar/cusstd/srch/webui/customizations/function/AR_ARXCUDCI_STD_VIEW/ArPrtySrchPG
  /oracle/apps/ar/cusstd/srch/webui/customizations/responsibility/67606/ArPrtySrchPG
  /oracle/apps/ar/cusstd/srch/webui/customizations/site/0/ArPrtySrchPG
  /oracle/apps/ar/cusstd/srch/webui/customizations/org/229/ArPrtySrchPG
  /oracle/apps/ar/cusstd/srch/webui/customizations/responsibility/57647/ArPrtySrchPG
   
  BEGIN
  jdr_utils.printdocument(p_document => '/oracle/apps/ar/cusstd/srch/webui/customizations/responsibility/57647/ArPrtySrchPG');
  END;
   
   
  <?xml version='1.0' encoding='UTF-8'?>
  <customization xmlns="http://xmlns.oracle.com/jrad" version="9.0.6.0.0_35" xml:lang="en-US" customizes="/oracle/apps/ar/cusstd/srch/webui/ArPrtySrchPG" xmlns:user="http://xmlns.oracle.com/jrad/user" user:responsibilityKey="cl cz_com_czk coll agent"
                 user:responsibilityAppId="695">
     <modifications>
        <modify element="pageLayoutRN" controllerClass="oracle.apps.ar.cusstd.srch.webui.xxArPrtySrchCO2"/>
     </modifications>
  </customization>

  Hello

  Check the context in which the beans have been customized. Make sure that the customizations are not made at the level of the shared areas. If the shared region, check in the context of what the 'document name' said while customization.

  Abdul Wahid