Migration of DHCP: Old name of the server appears in the console, but OK on server DHCP itself

Similar Questions

• After you rename the computer, the backup of the file history still showing the old name of the computer to its destination.

  Original title: history of Falie Worng Destination path

  I changed my computer name [my computer setting and the name, display name, computer and computer Description all equal under the same name]. But when the history of files backing up my files, he insists on putting the OLD computer name in the backup destination path, for example:

  Backup_Drive\\Backup_Folder_A\UserID\Old_Computer_Name\Data...

  I tried selecting a new backup drive and reboot several times, but the history of files always comes back to the old name of the computer when you create the destination path.

  How can I fix?

  Similar to the response of Siva here, you will want to return to

  C:\Users\\AppData\Local\Microsoft\Windows\FileHistory

  Now, if FileHistory was lit before, using the old username, there will be a configuration file and the Config1.xml and Config2.xml files will contain several tags using the old name of PC. Rather than wipe these files, open each file in Notepad and search for the name of your old PC and replace with the name of the new, do not forget to save.

  In addition, if you want to keep a backup that has already been created with the old name of PC, you'll need to find, rename the main folder ("old name PC") and in this folder, rename tags in the Web configuration files (as you did in the local configuration files).

  When I tried to delete my local config files, he would recreate using files of configuration of the backup, that were also incorrect, so I just manually renamed and mine works fine now under the new name of PC.

• How can I get the user name of the current user? Not the name of the user, but the user name is connected to.

  Anyone know how I can get the username of the current user? Not the name of the user, but the user name is connected to.

  Thank you!

  Only two variables that Captivate allows to work with are cpQuizInfoStudentName and cpQuizInfoStudentID, but the latter is only really designed to be used for the internal information server, not a typical SCORM LMS solution.

  Sounds to me like you may need to get hands on with the services of a JavaScript programmer.

• My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?

  ESTABLISHING A NETWORK.

  My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?

  Hello

  1. don't you make changes on the computer before the show?
  2. what version of operating system you are using on the computer?
  3. which network you're talking about (home wireless network or group)?
  4. which steps have tried?

  
  If you use a group home on the computer, see the link for more information.
  Home Sweet homegroup
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  You can also check out the link.
  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

   
  Provide us more information for you to help.

• Pictures on a new iMac won't start - he's trying to fix the photo library after the migration of my old iMac.  The two are running El Capitan

  Photos on my new iMac won't start - get an error message after trying to fix the photo library.  I just migrated all of my old iMac a new aid of Time machine backup.  Both are running OS 10.11 (El Capitan).

  Get an error message after trying to fix the photo library.

  What does this error message say?  Photos crash or exit gracefully?

  Where your iPhoto library that Library stored? In your pictures folder, or on an external drive?

  Try to copy the library of Photos directly without Time Machine. Connect the two Macs using your network and copy the old Mac to the new library, well as signed in on your new Mac.

  Then try to open this copy in Photos.

• ApexListener 2.0 is configured with the name of the service, but SQLDeveloper said SID

  Hello
  I have configured the ApexListener 2.0.0.354.17.05 through command line interface as described in http://docs.oracle.com/cd/E37099_01/doc/ doc.20 /e25066/install.htm
  

  [oracle@rac02 apex_listener]$ java -jar apex.war 
  This Listener instance has not yet been configured.
  Please complete the following prompts
  
  Enter the location to store configuration data:/u01/app/oracle/apex_listener
  Jan 8, 2013 2:29:00 PM oracle.dbtools.common.config.cmds.ConfigDir execute
  INFO: Set config.dir to /u01/app/oracle/apex_listener in: /home/oracle/apex_listener/apex.war
  Jan 8, 2013 2:29:03 PM oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder
  INFO: Using configuration folder: /u01/app/oracle/apex_listener/apex
  Enter the name of the database server [localhost]:rac-scan.akragmbh.local
  Enter the database listen port [1521]:
  Enter 1 to specify the database service name, or 2 to specify the database SID [1]:
  Enter the database service name:rac.akragmbh.local
  Enter the database user name [APEX_PUBLIC_USER]:
  [...]

  Everything worked well and the configuration is written in defaults.xml. No entry for the key 'db.sid '.

  [oracle@rac02 apex]$ cat /u01/app/oracle/apex_listener/apex/defaults.xml 
  <?xml version="1.0" encoding="UTF-8" standalone="no"?>
  <!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
  <properties>
  <comment>Saved on Tue Jan 08 14:30:03 CET 2013</comment>
  [...]
  <entry key="db.hostname">rac-scan.akragmbh.local</entry>
  <entry key="db.password">I don't tell</entry>
  <entry key="db.port">1521</entry>
  <entry key="db.servicename">rac.akragmbh.local</entry>
  [...]

  The listener and the APEX is running.
  
  But when I import the configuration of ApexListener in SQLDeveloper 3.2.20.09 the dialogbox said, I configured a SID instead of a service name.
  It is the saved configuration

  <?xml version="1.0" encoding="UTF-8"?>
  <!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
  <properties>
  
  <comment>
     Listener Administration
     Oracle SQL Developer 3.2.20.09.87
     Last Update: Tue Jan 08 16:07:23 CET 2013
  </comment>
  
  <entry key="db.password">I don't tell</entry>
  <entry key="db.connectionType">basic</entry>
  <entry key="db.hostname">rac-scan.akragmbh.local</entry>
  <entry key="db.port">1521</entry>
  <entry key="db.sid">orcl</entry>
  <entry key="db.servicename">rac.akragmbh.local</entry>
  <entry key="db.tnsAliasName"/>
  <entry key="db.tnsDirectory"/>
  <entry key="db.customURL"/>
  [...]

  What's wrong?

  There is a bug in SQL Developer providing a default SID "orcl", even if a service name is provided. The solution is to remove the SID "orcl" in

  1. parametres_globaux-> connections and
  2 database settings-> name (e.g. apex)-> connections

  Make sure you do these changes before loading your settings.

  Published by: Liz Saunders January 8, 2013 15:52

• duplicate the names of the objects, but not?

  Hello, Cp5.5

  I am appointing some of my objects using logical names so I can keep track of everything.  For some objects, I get a mixed message of name "...". is a reserved keyword or is already assigned to another element. "That is not the case now.

  When I originally started this project, I went a bit sideways with how I built and have since taken over my senses.  Originally, I had 6 slides that were essentially duplicates of each other and I condensed the 6 slides in 1.  This particular object is a chart that I'm trying to scen2_3_backoff name (which means "scenario 2, slide 3, back office person ').  Initially, I had an object with the same name but once I changed tactics on the build, this object and slide on that it was are both deleted.

  I cleared the cache but no change.  There is * much * advanced actions on my slides and copy to a new empty project is not an option.  The library shows me using only this image 4 times and I checked that the name is not used in 4 cases.  Checked variables and advanced actions and I have a duplicate here either.

  Any suggestions on how to empty the old names of objects I no longer use?

  Sorry, Andy, but it seems that Captivate has a persistent memory, once you have used a label, you can not use it again. Very annoying and I work on it many times myself. I'm trying to solve and then adding underscore more.

  Lilybiri

• My computer is stuck in a loop-it starts, the Welcome screen appears, I click on my name and made it appear my desktop background, but not icons. It then saves automatically power off. I started using the safe, but it's still just the power loop.

  Windows XP is my operating system.  My computer is a desktop Dell Dimension 457.  I think I must have got a virus/malware.  Please help me to access my computer!

  First of all, open and print this article from Microsoft - http://support.microsoft.com/kb/555648

  East of the fault of the only thing that I can see the information about adding the userinit.exe line - they forgot to include a comma at the end of the registry key.  So this print and add a comma with your pen to ink so that when you return as a result of this document you will not forget to register.

  Now, do a search to find and download BART PE to create a BART PE Boot disk (boot from the CD-Rom drive).

  Before you create the BART PE Boot disk, download and install Spybot Search and Destroy.  Then do a update to get all the updates to ensure that you have all the latest definitions for Spybot.  When you create the BART PE Boot disk - make sure you include the Spybot folder you have just downloaded and installed.

  I think that if you download and install LavaSoft Ad Aware Free will take place as well. Just download, install and do the updates it as well... Be sure to include this issue as well when you create BART PE Boot disk.

  Now, once you have created with these extra utilities startup disk, boot from the CD.

  Change the registry as a result of the above Microsoft article.  To enter the registry once BART PE CD is loaded, click on the GO button and click RUN and type REGEDIT and press ENTER.  When the registry opens, click the HKEY_USERS.  In the menu, and then click FILE.  Then click LOAD HIVE.  Then navigate to C:\WINDOWS\SYSTEM32\CONFIG\Software - note: the software is the name of the hive file registry you want to open.  When it is open, be sure to give it a name that MyHive will work.

  Follow the rest of the Microsoft Article in the link above to change the registry values.

  Once you have finished editing the registry, go back and click on the name of MyHive, then click file and unload the hive before leaving.

  Once this is done, then go to the command prompt, navigate to the executables to run Spybot, let it find and delete everything it can.  Then, if it will run - run the executable file for AD - AWARE Free Edition.  Let find and delete what it can.  I don't remember whether or not AD-AWARE will run on boot CD.  I know that Spybot is going.

  I suggest you to start in safe mode with support for network at this point.  I had good luck with my problems in this way.
  I hope that it will arrive where you can connect at LEAST.  Once in safe mode with network support I would then suggest to go to www.microsoft.com/protect and going to the PC or the PC security, regardless of the title/link is.  Then perform a free scan with Microsoft One Care Live.

  ON CHANGE:

  Oh... also, in the Microsoft article, there may be the drive letter as the X: drive... won't talk down and belittle everyone and their intelligence... I know that some people can be so literal and making a mistake in following the instructions is not an indicator of intelligence... but the X: should be C: or what is the letter of your boot drive... I know that for most, if not all here is a given but would not be a mistake bonehead by someone...

  Thank you... and it will be useful...

• BlackBerry software remote access since Z10 for Windows 8 PC file shows the name of the computer, but no files

  I can't access the files on my PC from my Z10 in the "File Manager" application.  Connecting my phone to my old PC Windows 7 works fine, but when I select my new PC for Windows 8.1 in the File Manager displays the icon of waiting for some time he does display no files at all.  I have no problem connection from a PC to the phone to see the files of the phone.

  I checked everything I could think of or available in the BB regarding troubleshooting topic:

  -Blackberry link under the file tab remote, I have the box checked next to my phone and I've shared my C:\Users\username folder

  -two phone PC on my wifi network and are all both are signed to my single Blackberry ID account

  -Blackberry link is running on my PC (I even tried uninstalling and reinstalling, but has not made a difference).

  -J' rebooted the PC and the phone, but that has not made a difference

  -In the Blackvery link in my phone settings, I have 'BlackBerry Link' in position 'On' and I can see my old and new PC in the section 'paired computers '.

  -J' have the latest version of the operating system on my phone and the latest version of the Blackberry link.

  Any help would be appreciated!  Thank you.

  Z10 OS: 10.2.1.537

  PC operating system: WIndows 8.1

  BlackBerry link: 1.2.3.23

  I figured this out, finally. McAfee Firewall is running on the new laptop and turn it off allowed me to see the files without problem. Stupid, not solicited for McAfee firewall was the issue.

• What is the proper way to create a user who can connect through the Console, but not through the VMWare Client?

  I did the following steps:

  1. create a user

  2. assign the Group root (remove all the other group of the user)

  What's my not just?

  Thank you!

  It is the way to do it.   Either you must be part of the root group to be given to the role admin (or a bespoke) at the level of the host to access the DCUI.

  If you create a user is added to the root group, but is assigned all permissions (either singularly or through a group) on the host then, then the user will be able to connect to the DCUI but not the client vSphere (or any other method of the API).

• I'm logged on two laptops and want to synchronize old laptop to the new, but don't see a current synchronization. Do not know what Miss me?

  Appreciate any help. Thank you!

  kauf22 said

  Appreciate any help. Thank you!

  I thought about it. I had the wrong computer name for my "old" computer

• Replaced the motherboard and the HARD disk and now you try to transfer the old TB on the new, but cannot locate the files on the HARD old disk which is now the drive 'E '.

  My computer has stopped working completely and I was going to upgrade in any case, I advanced the work.
  Having replaced everything (motherboard, HARD drive) and everything worked as it should I turned my attention to my emails.
  I tried the Transfer Wizard Windows 7, no joy. Tried to find the profile files, no joy. Just can't find anything about it either remote seems to be linked to tuberculosis.
  HELP Please
  Thank you

  Profile of Thunderbird folders are hidden files, so first make hidden files visible.
  http://KB.mozillazine.org/Show_hidden_files_and_folders

  The location of the profile: http://kb.mozillazine.org/Profile_folder_-_Thunderbird
  Even if your files are now in drive E, not C.

  Info on moving to a new pc: http://kb.mozillazine.org/Move_to_a_new_PC

  If you have downloaded Thunderbird to new pc and run it for the first time, it will create a profile, but do not create the exisitng e-mail accounts. Then you copy the contents of the old drive hard e: drive - profile folder (not the folder real profile, that all the files in the profile folder) and paste them into the profile folder overwrite the default files.

• access denied by the name of the computer, but not ip address

  current conditions:

  -J' have a mapped for example drive G:\ (\\ComputerName\Folder)
  -I could access the G:\ Subfolder1 (\\ComputerName\Folder\Subfolder1), but no G:\Subfolder2 (\\ComputerName\Folder\Subfolder2)
  -I can access \\xxx.xxx.xxx.xxx\Folder\Subfolder2 or any of another folder (using the ip address)

  what I did:
  s ' appropriate
  -system restore
  -disable firewall
  -disable antivirus

  other information:
  -This computer is a member of the domain
  -no problem with another pc
  -This problem occurs for each administrator even users

  When I try to enter the folder and then the popup "access denied."

  any sugestion?

  SOLVED

  This occurred because the Sync Center mark the folder in offline mode

  I don't know why, but when I disabled it this function then I can access the folder

  Thank you

• Windows Server 2012 R2 Essentials: Adopting the previous name of the unit and backups after reconstruction of the customer

  I have a WSE 2012 R2 domain set up at home and use for client backups. Today, I did a fresh install of Windows 10 on one of the clients, which was previously Windows 8.1. Installation went well, and he is now connected to the domain. However, I am unable to use the previous device name, as there always are in the field. I don't want to remove the old device, I need its backups. How can I use the old name of the computer/device and adopt the previous backups? I don't want to lose the old backups, or have to start backups as a new device. I have need of WSE to see my client computer as the same as the previous.

  Thank you

  -jim.

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• remove the old registered user or name of the owner for this operating system

  I would like to remove the old name of the owner of the operating system of my computer and update the info with my own.

  With a used computer, regardless of its origin, recommended is to do a clean/Windows factory restore install. If you don't want to do it (not recommended), you can change the owner registered as follows:

  How Do I Change The registered owner name in Windows Vista - http://vistasupport.mvps.org/change_registered_owner_name.htm
  MS - MVP - Elephant Boy computers - don't panic!