Migration of Essential Business Server 2008 Hyper-V to ESXi 5

Similar Questions

• Backups fail on Small Business Server 2008

  We have a Small Business Server 2008 which has only backup, with the following error;

  Backup started on October 3, 2014 10:30:07 'failed with following error code ' 2155348010' (one of the backup files could not be created.). Please rerun backup once the problem is resolved.

  We reformatted the drive, it works fine, but not the backup server to it.

  Anyone has any ideas what might be causing the problem?

  SCS

  SBS is outside the jurisdiction of sites.  Questions for this should be asked on Technet

  http://social.technet.Microsoft.com/forums/en-us/home

• outgoing faxes of Small business server 2008 does not

  I have a Wnidows Small Business Server 2008 running in 64-bit. I have 2 US Robotics modems attached to the server with the fax server role installation. Can receive faxes on both machines, I'm unable to send faxes on one or the other. Spoke about this problem at U.S. Robotics and did all the troub; e SHOOTING they asked and their answer is maybe to try to reinstall the Fax Server service. It seems resonable? If I do what are the procedures that I must take inorder to completely remove the Fax Server Service in order to get a clean reinstall of it? Thanks in advance for your help.

  Hello

  Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to Windows Server - Domain (VPN) and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  LC

• Services Terminal Server under Small Business Server 2008

  I have small Business Server 2008 Standard and you bought 5 client access licenses. I'm unable to use the client access licenses - will they work with Small Business Server 2008 Standard? I'm not an expert in this area

  Hello

  Your linked windows question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the Remote Desktop Services TechNet Forum:

  (Services Terminal Server) remote desktop services:
  http://social.technet.Microsoft.com/forums/en/winserverTS/threads/

  Hope the information is useful.

• code 8024401F with my small business server 2008

  The updates stopped working on my small business server 2008.

  Help, please.

  It is a forum for specific consumers. You will find support for Windows SBS in this forum: http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/threads

  Specific Windows Server security sub-forum: http://social.technet.microsoft.com/Forums/en-US/winserversecurity/threads

• Query for windows small business server 2008 SP1

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hello

  I have windows small business Server 2008 SP1, I am installing the additional DC for windows small business server 2008 on another server, I gave the DC ip addr as 192.168.1.2 subnet 255.255.255.0 Gateway 192.168.1.1 and 192.168.1.2 dns. On another server where I am trying to install AD DC 192.168.1.3 ip subnet 255.255.255.0 Gateway 192.168.1.1 192.168.1.2 dns... By running the dcpromo and the replication active directory, the installation is in error during replication... the error is

  Active directory could not install,

  Replication failed to allocate memory.

  cmd prompt nslookup also displays the server ip and domain name. Then any body tell me, if we can install AD DC for small business server 2008, and how is this replication error could not allocate memory. How to solve this error.

  Your comments will be appreciated

  Hey AAAAAAAAAAAAtif

  It's an instance of vista installation

  Try the link below sbs forum

  This forum is for General Discussions on Small Business Server 2008, R2, 2003, 2003 SP1, 2003 and earlier versions. Gateway available NNTP Client if you wish to participate via a Newsgroup Reader. Read the sticky at the top of the forum Post.

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

  Walter, the time zone traveller

• Cisco TelePresence Manager version 1.7 does support Windows Small Business Server 2008?

  Hello

  Is Microsoft Windows Small Business Server 2008 supported the Protocol LDAP, AD and MS Exchange server for Cisco TelePresence Manager version 1.7?

  Thank you

  AA

  Hello Ahmed - although this configuration "can work", Windows 2008 Small Business Server is not on the support list. This means that it has not been tested and it certifies to work with telepresence.

  To my knowledge, he's not on the roadmap for the future support however, I search and repost as soon as I have an answer for you.

  Kind regards

  -Andrew

  Sent by Cisco Support technique iPhone App

• Create the new virtual machine for Small Business Server 2008

  Hello

  When creating a new Machine virtual and choose the guest operating system, the "Small Business Server 2008" are not listed. Just choose "Microsoft Windows Server 2008 (64-bit)"?

  Thank you

  John

  Yes, it will work, and it is supported guest OS

  http://www.VMware.com/PDF/GuestOS_guide.PDF

  Edit: There is a bug in the user interface for the VIC, where probably 2008 will be displayed as Vista under the toolbar of guest operating system.

• Virtualizacao Small Business Server 2008

  Good afternoon Colegas,

  Com essas configuracao EU poderia virtualizar um Small Business Sever 2008 Server para 70 em media location?

  Segue abaixo as configuracoes:

  Modelo T610

  PROCESSADOR Intel® Xeon E5645 (2.40 Ghz)

  16 GB 1333 MHz memory

  EM 1 TB (2 x 500 GB) 15 RPM SAS Raid 0 HD

  Desde ja Agradea§o a bonitos,.
  

  
  

  Agora EU APB.

  Ahahha, sem problemas, a boa maquina fisica aguenta na. Fundo Vai!

  da mesma'm to farm HT can enable that e uma boa pratica.

  of any'm would gone a fazer, como por exemplo não deixar a Máquina em disco interno, mas isso pode ser resolvido to voce ampliar seu parque VMware.

  ABCs

• The client (Windows XP, Vista, Windows 7) users can connect to Microsoft Small Business Server 2008?

  Dear all,

  I intend to install on Server 2008 SBS Active Directory domain controller. In this session, I would like to know the client users can connect to the SBS server or not. If CAN, I want to know the steps & solutions on this answer and if NOT, why the clients could not connect to the SBS server.

  Server 2008 SBS can also be installed on the sequence of steps:
  SBS 2008 (AD, Exchange Server, SQL 2005 or 08, CRM4.0). It depends on the situation of the organization.

  I really want to know that, if we install steps on SBS 2008 above, can clients connect to the server?

  Kind regards
  Tun Aung Kyaw

  Hi Geraldine Tun.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Virtual run Win Server 2008, Enterprise Edition on ESXI 4

  Hi all

  I have MS Windows 2008 Enterprise Server that allows up to 4 Windows servers to run as VMs using the same VM license key. Can I run the server of Windows 4 VM on ESXi 4 platform using the same VM license key? I think that if MS allows the VM 4 of to run on their Hyper V Server 2008 then I am able to run the VM on ESXi 4, using the license key a VM.

  Thanks in advance.

  VinnyP

  I think that it's evolving especially with Hyper-V now.  I think that there are some differences between people licenses but I'm the last Q / A on the virtual FAQ which is -

  Q. Windows Server 2008 virtualization licensing fees apply when used with non-Microsoft software virtualization technologies?

  A. Yes. Usage rights apply regardless of the virtualization product used. However, other than Microsoft software virtualization technologies are not supported by Microsoft. For more information about support policies, please see the following articles of the basis of knowledge Microsoft (KB):

  I take that to mean licensing concepts apply whether you're running Hyper-V, ESX, Virtual PC or work/VM Workstation Server

  Who knows with Microsoft, however, their reasoning is completely stupid and obviously tax based without thinking about anything through.

  -Kyle

  «"RParker wrote: I guess I was mistaken, everything CAN be virtualized"»

• Server 2008 extremely slow on ESXi 4 (208167)

  A few months ago I started having serious performance on our Terminal server VM server problems, and I have yet to track down the problem. I know that I inevitably left out some sort of vital information, please bare with me and slap my wrist when I forget.

  Our Vmware ESXi system:

  2 quad-core (8 logical cores) processors

  12 GB memory

  RAID 1 Bay for discs of OS and RAID 5 for the data.

  VM on the system:

  Nuclei of SBS 2008 = 4, 9 GB RAM

  Server 2008 Standard (32-bit) = 4 cores, 2.5 GB of RAM

  XP Pro = 1 core, 512 MB of RAM

  This system used to work very well without any problems, but now it is sometimes unusable. The CPU spikes and takes forever, and it's not just with a single process either. It is used to serve a small site with a SQL database (used internally and not very intense) and Terminal Server services, both accounting can remote in and the use of Quickbooks.

  I started, I was wondering if possibly, it started happening when I created the XP Pro VM and if he had to do with assigning a processor when technically all 8 have already been used. Which could cause problems? In addition, the RAM is only 2.5 (made at 3, up to what I gave to XP). I know it's low, even though 32-bit can go to 4, but if I look at the memory usage in the system, it is only at 60% or more. I will probably increase the RAM of anyway, but could not nail down the problem.

  It could be something with general reserve and system? It seems it's only wrong with this machine a virtual that don't is not really implemented any differently from others. Most of the settings for the virtual machine are by default, other than the allocation of resources.

  Even when something as simple as opening session, or open the reliability and Performance Monitor, watching the CPU in the vSphere client usage jump path to the top, but its use disk and memory remain relatively the same.

  How can I find and check to solve this performance problem?

  I found a few other Community assignments that go in-depth on the question of vCPU. Take a good look at both of the threads below. The general consensus is to not use multiple vCPUs unless required. Those positions explain why, and they do it well. I would say that your other admins coming in and changing things may affect the performance of your system. Can you take their rights to change things?

  http://communities.VMware.com/thread/157849

  http://communities.VMware.com/thread/131269

• Windows Server 2008 R2 installs on ESXi 4

  I have a setup of ESX4 full blown at the headquarters, but we have an ESXi 4 just put us in a remote desktop (thanks to win a bunch of servers because of virtualization in the first place).

  This remote ESXi 4.0 server is for D.R. tests really, but I wanted to test the new DFS on Server 2008 R2 / branch Cache and all that jazz between the two sites.

  The problem is that the Server 2008 R2 will not be installed.  The start screen shows

  File: \windows\system32\boot\winload.exe

  Status: 0xc000035a

  Info: Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  Well, it's a processor 1.86 GHz Xeon 5120 and according to Intel, it IS 64-bit compatible:

  http://Ark.Intel.com/product.aspx?ID=27215 & Processor = 5120 & Spec-codes = SL9RY, SLABQ, SLAGD

  Heck, the original server COMES with a license for Windows Server 2003 64-bit.

  Is this a limitation with ESXi?  Should we go full blown ESX to run this?  The server is an HP ProLiant DL360 G5 server.

  Thank you!

  I forgot to mention. Enabling hardware virtualization in the BIOS may require a power cycle not only reboot.

• Windows Small Business Server 2008 starts after the full restoration of the PC

  I need help URGENT here. My company has a HP Vantage 2 hard drives with Windows 2008 Server. C and D, both have important data on them. D drive has become corrupted over the last weekend, and as a result, the server was very slow and data on the d drive was inaccessible. Unfortunately, D drive was somehow part of the boot sequence, and when I took it out, the computer would not start at all.

  Well made to purchase two new drives of 1 TB and replace the old records with them (we need the extra space anyway) and I did a complete system restore by booting from the windows installation CD and choose the external USB hard drive, we had that we were using for daily backups. Restore seemed to be going great, it took almost 3 hours and when he was done he had some problems.

  1 when the external USB drive was plugged and the system tried to start, it would give an error message and would not continue even if the BIOS was said to NOT boot from the USB key.

  2. when the drive has been disconnected, windows seems to start normally, I would still get up to a point where I had a mouse cursor that I could move on a black screen, but then the computer would suddenly reboot! Like someone hitting the reset button. I can hear the drives stop when it happens. The same thing happens with no failure or last known good configuration mode.

  It is a major problem because we do not have Internet or files. I wish there was a phone number that I can call for assistance. I would be happy to pay for it! even if it is a third party.

  I saw that Microsoft had "pay per incident" support but it just says: it is $ 260, what for? An hour? A case? A month?

  Any help would be appreciated

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How only migrate data between SQL Server 2008 Oracle 11?

  According to our requirement, we only have to migrate data from a SQL Server database to an existence
  Oracle database user.
  (1) I tried to do with the wizard of Migration SQL Developer 3.0.04, but find a problem.
  My SQL Server database name is SCDS41P2 and my Oracle database user name is CDS41P2;
  When I used SQL Developer move offline data by the Migration Wizard, I found all the oracle user
  name in movedata files who obtained by running the Migration Wizard
  is dbo_SCDS41P2. If the Oracle user name is not the same as my Oracle username existed.
  the data cannot be moved to my user Oracle existed when I run oracle_ctl.bat in the command line window.
  So I had to change the Oracle username in all the movedata files, but it is difficult to change because there are a lot of tables in
  databases. So could you please tell me how to get the movedata files which is the name of user oracle in them my
  WHEREAS Oracle user name?
  
  (2) I also tried to use the "copy to Oracle" to copy the data to SQL Server database tables
  the user database was Oracle. When you click on 'copy to Oracle', I selected the option 'Include data' and 'replace '.
  But I found some tables cannot be copied, the error info is as below:
  SPSSCMOR_CONTROLTABLE table failed. Message: ORA-00955: name is already used by an existing object
  
  Could you please tell me how to deal with this kind of mistake?
  
  Thank you!
  
  Published by: 870587 on July 6, 2011 02:57

  Hello
  After following with development the following should work too-

  1 use the migration option to capture and convert the SQL * database server
  2. go in SQL * Developer and remove the converted model.
  3. click on the captured model and choose 'convert '.
  4. click Next and you should get a screen with 2 options - "Data Type Mapping" and "Object Naming.
  5. choose "Object Naming" and scroll down the list until you see the name of the user who will be transformed. For example, in my test, I got the names scott_test and dbo_test - where the owners are 'scott' and 'dba' and 'test' was the name of the database.
  6. change the name of oner_database to just owner - scott_test to scott
  7 complete the conversion process and the owners must be created without the name of the database.
  8. you should now be able to generate the SQL * scripts of charger with only the name of the owner in the CTL files.

  Please try this and let us know if it works for you.

  Kind regards
  Mike