Migration problem

Similar Questions

• Server Migration problem

  Hello

  I'm planning on migrating a number of servers between the 2 groups in the same data center. At the present time, that the two groups do not have access to the adapter network same vMotion is not possible, it is very good and will be resolved shortly. However I get an error but another message which reads as follows:

  The virtual machine requires hardware features that are not supported or disabled on the target host:

  * General incompatibilities

  If possible, use an active cluster with vMotion compatibility (EVC) Enhanced; See article 1003212.
  

  
  

  CPUID details: incompatibility at level 0 x 1 'ecx' register

  Bits of the host: 0110:0010:1001:1000:0010:0010:0000:0011

  Required: x0xx:x01x:1001:10xx:xxxx:xx1x:xxxx:x 011

  I'm assuming it's because the processors on hosts are slightly different between the two groups, all hosts in two clusters are IBM HS23 blades but...

  Group 1 - Inter (R) Xeon CPU E5 - 26700 2.60 GHz

  Group 2 -Inter (R) Xeon CPU E5-2650v2 @ 2.60 GHz

  
  

  Can someone please advise if there is anything I can do to get rid of this error, if I turned off the VMs system first I can migrate their and they function without problem however, I really want to avoid if possible system failures.

  
  

  I'm assuming that the solution may involve the CVS (this is currently disabled on the two clusters) but I would like that confidence that allowing this cause no problem for connection etc.
  

  
  

  Thank you

  
  

  
  

  It's true. you need downtime to allow CVS on an existing cluster.

  but that's why I suggesting a different solution.

  (1) create a new cluster, select CVS on that.

  -Please find planning intel CPU would be appropriate for your two models that you plan to mix. [Let me give you a simple example, if I have two hosts of AMD, one with AMD Optron G1 and the other with AMD Optron G2 CPU, I would create a cluster of empty with active VCA, basis for VCA updated AMD Optron generation 1, powerdown all VMs running in both hosts, put them in maintenance mode and drag the cluster out of maintenance mode and begin to power on virtual machines]

  -you have two processors in your next guests clustered computers. I don't know too much what appropriate Intel CPU would be at there place for them, please try to find this first release.

  Group 1 - Inter (R) Xeon CPU E5 - 26700 2.60 GHz

  Group 2 - Inter (R) Xeon CPU E5-2650v2 @ 2.60 GHz

  (2) now clear out a host of each departure of cluster 1 and 2, which will be your initial test environment, bringing virtual machines in this third group. While doing this, you may need migration cold of the two clusters, but more likely, you would be able to bring virtual machines to at least one of your cluster using vMotion.

  (3) if things work out well for you, free plan all hosts to join this group and get rid of the remaining clusters of empty.

• Mac Migration problem

  I bought a new macbook and migrated my old. I get a message that creative cloud is missing or damaged, and I need to install a new creative cloud. When I start the download again it tells me there is a problem and a new version is necessary and is sending me to download another copy. Stuck in this loop.

  Uninstall, run the cleanup tool.  Then try to reinstall.  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Migration problem reports: file not published online

  Hello everyone!
  
  I'm doing a migration of forms and reports on the Apex, but I can not download these reports 3: I got the error "XML report not published online", as you can see here.
  
  Anyone know why this problem appears, and why only 3 reports have this problem?
  I checked all the reports, but I couldn't find any big difference between these 3 and other...
  
  
  I also have another problem with reports settings: in the XML file, I "& param ' but Apex seems not to accept it. I modified the changing XML file "& param"to": param", but it still does not work.
  How should I write the settings in the XML file?
  
  
  Thanks in advance,
  Stone

  Hi Pierre,.

  Thanks again for the redirection on your sample XML report files.

  First, the file upload issue you reported related to the XML file containing a multibyte, but the file was not coded UTF - 8. When I saved the file with UTF-8 encoding value, I then could successfully download the file to my project of Conversion of forms. I noticed that your XML file contains several elements of with the SQL statements for your report. Even if such a file can be downloaded on your forms Conversion project, project pages associated with the reports only expect a element in the file and therefore will not work correctly. As a solution, I suggest that you take a backup of your XML file, and then edit the file to remove additional items . It will only contain a single element of with the SQL statement to be used in the conversion process.

  For reports with parameters, my suggested workaround solution would be to remove the parameter of the SQL statement references, download the report and then try to convert it. If successful, an interactive report Oracle APEX is generated, based on the SQL statement from the report of the Oracle. Once the interactive report has been generated successfully, update the Oracle APEX page to include a new point (e.g. list selection) takes over the possible user parameter values. Change the source of interactive report for the new reference point. The interactive report then only display information based on the setting selected by the user. I hope this work around will allow you to continue your conversion process. Please let me know how you get on and also if you have any other problems with the conversion process.

  Kind regards
  Hilary

• Email migration problem

  I'm trying to migrate my mailboxes to mail in OS x 10.5 PPC G5 to mail in OSX 10.6 Intel. The migration tool did not move to the data. I tried the import tool and which failed. I moved the data manually and the boxes appear but not the content. The PPC machine is dead, but the HD is fine. What should I do to recover these data? Kirby

  Well, if the hard drive is fine, you must make sure that the users-> yourname-> library-> Mail and Mail downloads are displaced in their own folder on your desktop on your new machine folder.   You can then use the Mail tool Import Mail to the application in the Mail menu or file of the mail app to import the mailboxes, and then click the folder that you created on your desktop to keep these messages.

  Remember, it's only for locally stored e-mail messages.  If you use IMAP or Exchange, this information may already be on the server and you can connect with the settings on your new machine.

• SYSVOL Migration problem

  Hi all

  We have domain controllers consist of windows server 2008 and 2012 with FFL and Server 2008 of the DFL. recently, I start migration to DFSR FRS sysvol replication. has passed through the 3 stages of migration, but in the last step, we get the error like below. Please need help on how to remove the 'double '.

  

  Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• EXCHANGE SERVER MIGRATION PROBLEM

  Unity 4.0 (4) SR1

  Exchange 2000 BOX

  Users were migrated to an older exchange server, less stable, to a new through the usual advertising------change of method of moving users from one server to another.

  The old server is still in place and active.

  When it breaks down, the UNIT is unable to deliver messages to subscribers.

  Do I have to re - run exchange on the unit configuration wizard to define the new server as the main? Otherwise, any ideas why the old server to be up? What is the workaround-difficulty?

  Moreover, this most recent server will be upgraded to EX2K3 in the coming months. What needs to be done to the unit to perform this update (I'm looking for a link to the PDF here)

  Thank you

  mast

  The unit is oriented to the old server server partner. Please see this guide:

  Changing the swap Server

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_upgrade_guides_chapter09186a0080205a7f.html

  The tool that you will run is Configuration of Message Store assistant

  For your second question:

  Upgrading Exchange on the Cisco Unity system

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_upgrade_guides_chapter09186a0080205a8b.html#wp1038652

• Removing VCS of TMS and TMSPE migration problem

  We prepare to start using TMSPE, however it must first disable replication on all VCS via MSD MSD Agent.  There is a VCS that have failed has been deleted afterwards, but we cannot delete TMS because TMS Agent replication is enabled.  We cannot have the Agent MSDS tab to disable the replication because the VCS is offline (i.e. it was removed) - it just goes to the 'Connection' tab whenever I try.

  So, how can we migrate to TMSPE if TMS don't delete us the VCS in offline mode or at least turn Replication Agent MSDS for it?

  Hey Nick

  Try to run this SQL query:

  USE TMSNG

  UPDATE field_SystemField SET BolValue = 0 WHERE field_Field_Id = 1072

  UPDATE Cluster SET EnforceTMSAgentDataReplication = 0

  This should clear the replication on all VCs added to the TMS (even the zombie ones like the one you have), once it is executed, you can try to purge the VCS.

  / Magnus

• SQL database Migration problem!

  Hello

  I am migrating the database SQL 2012 for vcenter 5.5.  It worked fine, but I can't create jobs of Roll-up on the new SQL Server, because the vCenter database uses the custom schema 'Raphael', cumulative patch-work scripts fail to run because they are written to the default dbo schema.

  I don't know how to change them all to work with the custom schema.

  Any ideas?

  Hello, you can update the sql scripts used to create the jobs of roll-up, see this article VMware KB: update rollup jobs after the error: the performance data are currently not available for this entity -you can see the location of the sql jobs based on your OS, change and update accordingly to recreate

• vCenter DB SQL migration problem...

  I am migrating the vCenter DB SQL to a dedicated SQL Server.

  He already uses SQL Server but on the VM as well as the installation of vCenter.

  Displacement of the DB and align the ODBC on the connection failed start service vCenter, so I decided to re - install from scratch.

  I did installing vCenter ODBC for the DB link and should be encouraged to use the existing database.

  There is no "happen so I had to go back."

  Any reason, why this did not happen for me?

  Pete.

  This link might be useful

  Modification of the VCDB for VMware Virtual Center Server instance

• Stolen software - Migration problem...

  I recently had a run of bad luck. I got a large number of my stolen posessions, among whom was my CS4 collection. I tried it spend at my computer from a backup disk, but I get an error code 150:30 when opening one of the applications. Is there a way to fix this? Can I get replacement discs some how?

  If you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  If you need to reset your activation meter, contact adobe support: http://www.adobe.com/support/chat/ivrchat.html

• SQL Dev third party migration problem

  I installed 11g on Windows 7
  I'm using Sql 11 g Developer migrate the database to sql server 2008 to Oracle 11 g
  
  Migration > Quick Migration
  
  Select the connection to the Source > target connection > repository
  AND

  check

  it generate errors:
  
  

  Locate the source plugin FAILURE

  verification of role multi-schemas role FAILED "RESOURCE" is not granted with the admin option

  *.
  
  I have the required permission for the user but it by generating the same error
  
  
  Help out me
  
  Thank you

  The latest version of SQL Developer is available for free on OTN.
  http://www.Oracle.com/technetwork/developer-tools/SQL-Developer/downloads/index.html

  Kind regards
  Dermot.
  SQL development team

• Web chat Migration problem.

  Hi all
  
  I'm trying to move the webcat webcat points not all from one environment to the other.
  
  I applied some changes to the properties of columns and applied to the other columns in the same dimension coulmns by using the "SAVE as default option system wide format column below.
  
  Can someone let me know where it is to be saved in webcatalogs Manger. which is the specific in Catalog Manager folder because I want to transfer only this change.

  Have a look here:

  http://obiee101.blogspot.com/2009/02/OBIEE-editing-system-wide-defaults.html

  concerning

  John
  http://obiee101.blogspot.com

• exec_sql. PLL in the form of 11g

  Hi all

  I've struggled for some time with a form of migration problem.

  Reminder: My business is migrating to Oracle 10 g 11 g form through all the screens, libraries and all objects in general. A few days ago, I found a screen which opens a connection to the database and execute instructions (grant privileges, change password), this form uses exec_sql.pll which is apparently a package included in the implementation of forms since version 6.

  The problem begins when I took the current exec_sql.pll of my deposit and try to compile in Builder 11g.

  the main problem is that there is a function that does not compile:

  PACKAGE currconn BODY IS

  -This is the definition of package for currConn

  -For Developer/2000 R 2.x, which makes implementation of the STPROC. HSTDEF

  -procedure.

  FUNCTION get_curr_conn RETURN pls_integer

  IS

  hstdef PLS_INTEGER;

  BEGIN

  stproc.hstdef (hstdef); Obsolete in Forms11g - form of Oracle 11 g Migration

  connection_id: = EXEC_SQL. DEFAULT_CONNECTION;

  Tensioner: = EXEC_SQL.IS_CONNECTED;

  RETURN hstdef;

  EXCEPTION

  WHILE OTHERS THEN

  RETURNS A NULL VALUE.

  END;

  END currconn;

  According to the documentation of oracle forms, this guy here [stproc.hstdef] is now obsolete. Therefore, because that's why I can't continue with the compilation. the logic to connect to the DB and execute some instructions is present across several screens, so ideally, I would like to correct the root cause of which is the library and not apply with a workaround in each single fmb

  Issue.

  1. is there any place where I can download a newer version of exec_sql.pll?

  2. If the answer to #1 is NEGATIVE, is there another way to get around the above function?

  OK, time for me to chime...

  If you need not STPROC so it is not a problem because it no longer exists.  What you need to do, is not to use an old pll.  Since functions supported this old pll are now based in the forms, the library of the add-on should no longer be needed and your form should compile.  If it is not the case, your form code must be updated correctly.

  If your concern is that you have a lot of modules should be updated, you can use the JDAPI or CAPI to perform updates all modules quickly.

  If you do not correct the code at some point, you will continue to have this problem every time you upgrade.  What will happen when you need go to v12?

• hexadecimal display special characters after 4.2 update

  After the update to 4.2 on the special characters of some items appear in hexadecimal notation
  
  German special characters - Aoussaou...--> u & CF #x;
  
  This only occurs in some applications in a workspace. Maybe the developer has used an unlikely way than the elements of filling via a url? The applications developed by seems to be normal.
  
  What is a migration problem or a problem of development?
  
  concerning
  Ralf
  
  
  ------
  http://old/pls/apex/f?p=123:502:776478184807008::NO:502:P502_STELLE_ID,F123_BEZEICHNUNG:113,113.2013%20-%20Jugendsozialarbeiter%20%2F%20Clubleiter%20-%20Jugendfreizeitzentrum%20S%C3%BCdclub%20F%C3%BCrstenwalde%20-%20Verein%20BSG%20Pneumant%20F%C3%BCrstenwalde%20e.V.
  
  113.2013 - Jugendsozialarbeiter / Clubleiter - Jugendfreizeitzentrum Sudclub Fürstenwalde - Verein BSG Pneumant Fürstenwalde e.V.
  
  http://new/pls/htmldb/f?p=123:502:29467084595368::NO:502:P502_STELLE_ID,F123_BEZEICHNUNG:113,113.2013%20-%20Jugendsozialarbeiter%20%2F%20Clubleiter%20-%20Jugendfreizeitzentrum%20S%C3%BCdclub%20F%C3%BCrstenwalde%20-%20Verein%20BSG%20Pneumant%20F%C3%BCrstenwalde%20e.V.
  
  113.2013 - Jugendsozialarbeiter & #x2F; Clubleiter - Jugendfreizeitzentrum S & #xFC; dclub F & #xFC; rstenwalde - Verein BSG Pneumant F & #xFC; rstenwalde e.V.
  (I inserted for example some areas between & _ #x2F; - or maybe the difference is not to be seen.)

  Hi Ralf,.

  is '113.2013 - Jugendsozialarbeiter & #x2F;. Clubleiter - S Jugendfreizeitzentrum & #xFC; dclub F & #xFC; rstenwalde - Verein BSG Pneumant F & #xFC; rstenwalde e.V.' the text of a link? Or is it posted somewhere else? It looks like a double exhaust system takes place.

  4.2 there is a new parameter called "HTML escaping Mode" which is by default the value 'Extended '. You can find it under "Edit Application Properties"-> security-> security of the browser. It may not be visible if 'Compatibility Mode' ('Change the properties of Application'-> 'Properties') is not defined > = 4.1. So, you'll need temporarily to 4.2 make visible this attribute.

  If you set it to 'Basic', you should be able to experience of the old behavior. But I think that we still have to examine why you have the double escapement.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf