Migration using the file system

Similar Questions

• How to open the log file after you have used the file system Checker

  I used the System File Checker.  It finds corrupted files, but I can't open the details of sfc with the path used in the system file checker topic 929833

  Ron

  If you don't mind, run a sfc/scannow again. When it of done, don't post the cmd window.

  In the same window of cmd, copy / paste the command line, I gave you, then press ENTER.

• Recursive loop through the file system.

  Hello!

  I'm trying to figure if Javascript is my answer to my problem.  I have been able to re - write all my AppleScript scripts that manipulate Illustrator with the exception of those that he had to use the file system.  We stayed in PC at work and now I have to figure this out.  Our art files are saved with a number of 7 digits, followed by the name of art in the file.  Ex: 1000049-Bob Garage.  My applescript had a recursive loop that worked its way down through the structure of the files on our server art until it finds the record low where it belonged, then saved in itself.  Here is an example of how the structure of server files (these are the folder names) is extended:

  1000000-1004999

  1005000-1005999

  1010000-1014999

  and so on.

  The script would load all foldernames in the first level of the directory, loop through them and watch the first and last name of each of these folder names, then compare the Illustrator file name to them.  If my file is between the two, then the loop itself, called loaded the files inside of that folder and in doing so, working its way down through the folders through the tree structure until there where records is no longer.  At this point, the file was saved, in the order, where it should be.

  I have no idea on how to start this task with Javascript, if this is possible even with a language developed for browsers.  I'm with other people who are frustrated by such a widely adopted language, if little info is available on its use outside the browser.  If anyone can tell me all resources dealing with Javascript programming of the file system, or even to have the kindness to write this little monster for me, I'd always in your debt!

  Thanks in advance for any time you spend with this problem!

  Open the ESTK, and then on the Help menu, you will find a link to the Javascript Tools Guide. You will find everything that you need in Chapter 3 file system access.

• How can I migrate content from file system to webcenter content using inbound refinery?

  Hello

  How can I move content 'Webcenter content' using Refinery Inboundfile system? There is a lot of content in my system, I want to go to "Content Server" using inbound refinery.

  How can I reach it? Is it possible to do this? If this is not possible using inbound refinery, so how can I do this?

  I use 11.1.1.6 version.

  Help, please.

  Concerning

  REDA

  Hi reda,.

  First - incoming refinery isn't real resources whose content is ingested in the content server. 'S done it by Webcenter Content server that holds / process of all content items.

  IBR is only used for the conversion of 1 format to PDF documents (and some others).

  So, in your case, you must first set up a content server and then install Desktop Integration Suite customer on your physical machine. In this place, you can drag-and - drop all the content of the file system to the content server.

  Links to this documentation are available from the following links:

  Content of the WC: http://docs.oracle.com/cd/E28280_01/doc.1111/e26692/toc.htm

  Desktop Integration Suite: http://docs.oracle.com/cd/E28280_01/doc.1111/e10624/toc.htm

  Please go through the documentation first to get those basic concepts allowed.

  Thank you

  Srinath

• LCM - artifact of import to the file system without using a source application

  Hi all

  I would like to ask if I can import the objects in the file system in SSP without the source application, I have the source file: XML (which contains the resources folder: configuration, type of plan, artifacts global relational "Data.xml") and record information: registration, sourceinfo.xml) which was taken from an application that no longer exists!

  How could we do?

  Thanks in advance

  Kind regards

  1003344 wrote:

  Thank you for your reply, I tried to put the folder under what but I can't see them yet! I also tried tried to put the. XML directly under what files but I still don't see the sub file system

  do I need to restart the server?

  Kind regards

  If you put the files and the folder structure in place then there is no need to restart and it should pick it up, if the structure is incorrect, so he will not pick it up, might be interesting to try an export of test on a different application or a system to get an idea of what files you need.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• When I get an email, according to windowsmail with attachments, I can't file attachments by using the file command menu

  original title: impossible to file attachments in mail

  Hello; I'm with family Vista premium and windows mail as a messaging system. I was with IE8, and now I've migrated to IE9.

  When I get an email, under windowsmail with attachments, I can't file attachments by using the file command menu. This option is blocked. Under windows mail, I went to tools, options, security and made sure that: Let not the attachments which are unsecured... box be deselected. It makes no difference, and I still can't save attachment like this; I CAN SAVE BY CLICKING and opening the attachment and save it but it is not satisfactory that I can't save the attachment by using the file command menu.

  Can you help me please?

  IE9 is certainly the culprit and there is more questions. I know that some MVPs have contacted their MS threads about it and even received no answer.

  My guess is that MS will not address this issue. Do not forget that the development team of Windows Mail is dissolved by the MS in June 2006. (Yes, while Vista was still in beta). I seriously doubt they care.

• What can I do when my ps3 displays the file system of the disk drive is corrupted and will be restored?

  What can I do when my ps3 displays the file system of the disk drive is corrupted and will be restored?

  Disconnect, and then try to connect again. Use a different cable.

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• Cannot use the files copied from Windows 8/7/Vista in windows XP.

  Always there are people who use Windows Xp, the problem is that when I copy the files in my USB and use it in my friends house, then Windows XP said 'pen drive not formatted ".

  Always there are people who use Windows Xp, the problem is that when I copy the files in my USB and use it in my friends house, then Windows XP said 'pen drive not formatted ".

  How is the "pen drive" formatted - with what the specific OS file system?
   
  This is more likely to be a file system - do not operating system (although related, not as much as you might think)-problem.  Another possibility is a problem hardware or bad driver on the machine Windows XP itself.  It could also be, although rare, an incompatible 'USB key '.
   
  What is the 'pen drive' is formatted with the file system is essentially - the first question to ask.  Then - if I were you - I everything on the 'pen drive' copy on a computer which can be read - if committed to the machine more common denominator (in this case the Windows XP machine) you will use and FORMAT this 'pen drive' using this machine.  One of the few possible things will happen no doubt...

  (1) you'll find you format it with a version of NTFS that will work in all areas - all the machines that you can use with Windows XP or more on them.  Then this problem will disappear.

  (2) you will find there * is * something wrong with the Windows XP specific in question and this machine is not a problem easily solved this and your "pen drive" probably will work on someone elses machine Windows XP very well as it existed before.

  (3) you will end up with a FAT32 formatted "pen drive" that should work on most any system - as long as you don't need to transfer * really * large individual files.

• The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume D: utility.

  However, chkdsk finds no problems, so what happens?

  Checking file system on D:
  The type of the file system is NTFS.
  Volume label is A RAID.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.
  Windows will now check the disk.
  Cleaning of minor inconsistencies on the drive.
  Cleaning 9 unused entries index $SII of file 0x9.
  Cleaning 9 unused entries index $SDH of file 0x9.
  Cleaning unused 9 security descriptors.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.
  CHKDSK is verifying file data (stage 4 of 5)...
  File data verification completed.
  CHKDSK is verifying free space (step 5 of 5)...
  Free space verification is complete.

  244196000 KB total disk space.
  126454172 KB in 238052 files.
  109736 Ko 22501 index.
  0 KB in bad sectors.
  868124 KB in use by the system.
  65536 KB occupied by the log file.
  116763968 KB available on disk.

  4 096 bytes in each allocation unit.
  61049000 total allocation on the drive units.
  29190992 allocation units available on disk.

  He is so little known about your configuration - because the forums MS Answers do not ask for information, when a new question is asked.

  If you run some kind of RAID configuration, you might do better if you describe your RAID configuration and after the actual event that you see in the event log (is it event ID 55?).  Then maybe you will get some ideas of the Microsoft Support engineer who might actually work.

  You see just this event in the paper at random times or is it when you try to run a specific operation and if yes, what operation triggers the event?  Here is an article of MS to help get you started, but if you use Google to search for the error message, you can find more ideas:

  http://support.Microsoft.com/kb/246026

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) US $100.

  Here's how to publish events to the event to display the log files:

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• The names of source files are larger than is supported by the file system...

  "The names of source files are larger than is supported by the file system. Try to move to a location that has a shorter path name, or try renaming to name more short (s) before performing this operation. »

  There are about 10 subfolders on the computer. None can be deleted, moved, or renamed without one appearing in the message. I tried UNLOCKER ASSISTANT & DELINVFILE get rid of this file. Once more, none worked. Command prompt did not work as well. Please help me, this issue will not go away on my desk.

  Try first to remove bypassing the Recycle Bin using SHIFT-DEL(thanks, Michael Murphy) rather than just led

  Try to use one of the following free products to remove the file/folder.  Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml or file Assassin http://www.malwarebytes.org/fileassassin.php (with or without forcing the deletion and you have to force the deletion in this case: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/). These programs often work when normal functions remove Vista not work correctly.  Have you tried Unlocker (I don't know if it's the same as Unlocker Assistant) but if this if it is different, gives it a try.

  Here is an article on this topic (related to another topic, but essentially the same problem) with a number of suggestions - which can work for you: http://www.howtogeek.com/forum/topic/how-to-delete-source-file-names-are-larger-than-is.

  I hope that one of these options help.  If this isn't the case, after return and we will see if we can find another answer.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• verification of the file system and the disk check

  I always thought I knew.
  But I'll have more in addition to the doubts and uncertainties.

  When is to perform the verification of the file system?
  When is to perform the disk check?

  t-4-2

  Hello

  SFC/scannow - run when you suspect that there may be a file system corruption as it will check the digital
  Signatures. Of course, SFC will attempt to overwrite any file that is not signed correctly. For many errors
  It should be considered a first step in the effort to repair.

  How to repair the operating system and how to restore the configuration of the operating system to a previous version
  point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  System File Checker
  http://msdn.Microsoft.com/en-us/library/aa382541 (vs.85) .aspx

  System File Checker
  http://en.Wikipedia.org/wiki/System_File_Checker

  ==================================================

  CheckDisk (chkdsk) should be run every time you think that hard drive corruption as possible which could be
  1 file on the disc as it verifies the logical integrity of the disc. My preference is to run it also
  SFC is executed at any time, especially if there was any found errors.

  This explains how Vista and Windows 7 checkdisk (chkdsk)

  An explanation of CHKDSK and the new /C and /I switches
  http://support.Microsoft.com/kb/187941

  Chkdsk
  http://en.Wikipedia.org/wiki/chkdsk

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The file system on the disk structure is corrupted and unusable. ...

  Dell Optiplex 3010
  WD5000AAKX

  Windows 7 Pro SP1 64 bit

  This is the drive that contains the operating system and was just replaced on 23 July. I restored the disk backups using Acronis True Image 2014.

  From July 25, I started to see

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume of OS utility.

  in the system (Source Ntfs, event ID 55) event log.

  I ran a CHKDSK /R on the disk and it reported no problem with the drive.

  Except for the scary messages in the system event log, I see no problem, but I also don't see these errors on the other disk in the machine.

  [I forgot to mention that the drive passes diagnostics pre-boot]

  What happens here?

  I see nothing in the article in PC Magazine directly addressed the problem. You were talking about the complexity and the possibilities of seriously screw things with True global Image?

  In addition, the link to the Microsoft solution irritates me to 'we're sorry, the requested page is not found.

  However, I think I found the solution, and it is quite related software.

  After scouring the logs of system events and application, I realized that the error I've been see is still bracketed by the subsystem VSS starts and stops and was almost always related to a backup operation or a virus scan.

  Some research (Google search, in fact) have allowed me to suspect that successful shadows of the disc were somewhat corrupt, so I simply deleted them (vssadmin delete shadows / for = c: / all). Since then, there has been no error reported, new instant shade have been created, and everything else works OK.

• Writing a file with the file system

  I'm trying to export a file in javascript and write it in the retentive memory.

  I use 2 WebWorks (BB10.2) and the plugin 'com.blackberry.io '.

  I am able to access the file system

  window.requestFileSystem (window. PERSISTENT, 0, {function (fileSystem)
  fileSystem.root.getFile (sFile, {create: true}, {(fileEntry) function)
  Console.log ("Cordova about to create the writer of the entry in the file");

  Console.log (JSON.stringify (fileEntry));
  fileEntry.createWriter ({function (writer)
  Console.log ("Cordova about to write to the file");

  Writer.onwrite = function (evt) {}
  Console.log ("write successful:" + fileEntry.fullPath);
  Alert (fileEntry.FullPath);
  };

  I'm sorry that my original post has seemed to be cut short.

  The problem is when the call actually:

  Writer.Write (new Blob ([surlabasedesdonneesdufabricantduballast], {type: "text/csv;})) charset = utf - 8 "}));

  I discovered also for what was causing the problem. The debugger on the pc seems to interfere with the process. As soon as I removed the breakpoints it started working.

• BB10 - Audio/video in HTML5 - reading file from the file system

  Hello.

  I tried to read a file from the file system on the BB10 Dev Alpha, using the HTML5 video + HTML5 Audio implementation, but it seems to not work for me with the following source code:

  var audio = document.createElement('audio');
  audio.src="/accounts/1000/shared/music/testfile.wav";
  audio.controls = true;
  
  var video = document.createElement('video');
  video.src="/accounts/1000/shared/videos/testfile.avi";
  video.controls = true;
  

  Referring to the HTML5 Audio API documentation and Video of HTML5 , I used the example presented here source code, but I still get the following error message:

  

  Anyone now how to get it working or if it is not yet implemented in the BB10 WebWorks API/framework?

  Well, I believe that what could be the problem.  In order to access to the / shared the location of the folder, your application should allow the permission to do so.  This can be done by adding the following to your config.xml file:

  
      access_shared
  
  

  Next, you need to whitelist the way file:/// by adding an element to access.  I remember that's how its done:

  Note You can whitelist all areas using the following:

  Hope that helps.