Recursive loop through the file system.
Hello!
I'm trying to figure if Javascript is my answer to my problem. I have been able to re - write all my AppleScript scripts that manipulate Illustrator with the exception of those that he had to use the file system. We stayed in PC at work and now I have to figure this out. Our art files are saved with a number of 7 digits, followed by the name of art in the file. Ex: 1000049-Bob Garage. My applescript had a recursive loop that worked its way down through the structure of the files on our server art until it finds the record low where it belonged, then saved in itself. Here is an example of how the structure of server files (these are the folder names) is extended:
1000000-1004999
1005000-1005999
1010000-1014999
and so on.
The script would load all foldernames in the first level of the directory, loop through them and watch the first and last name of each of these folder names, then compare the Illustrator file name to them. If my file is between the two, then the loop itself, called loaded the files inside of that folder and in doing so, working its way down through the folders through the tree structure until there where records is no longer. At this point, the file was saved, in the order, where it should be.
I have no idea on how to start this task with Javascript, if this is possible even with a language developed for browsers. I'm with other people who are frustrated by such a widely adopted language, if little info is available on its use outside the browser. If anyone can tell me all resources dealing with Javascript programming of the file system, or even to have the kindness to write this little monster for me, I'd always in your debt!
Thanks in advance for any time you spend with this problem!
Open the ESTK, and then on the Help menu, you will find a link to the Javascript Tools Guide. You will find everything that you need in Chapter 3 file system access.
Tags: Illustrator
Similar Questions
-
Loop through the list in flex 4 conclusion d buttons
Anyone know how to completely recursively loops through the list in flex 4 by pulling the bodies of buttons. This way I can apply my effects for buttons on the screen at the same time?
You just create a subclass of button that has the desired effect and use it throughout your application.
Gordon Smith
Adobe Flex SDK team
-
However, chkdsk finds no problems, so what happens?
Checking file system on D:
The type of the file system is NTFS.
Volume label is A RAID.One of your disks needs to be checked for consistency. You
may cancel the disk check, but it is strongly recommended
that you continue.
Windows will now check the disk.
Cleaning of minor inconsistencies on the drive.
Cleaning 9 unused entries index $SII of file 0x9.
Cleaning 9 unused entries index $SDH of file 0x9.
Cleaning unused 9 security descriptors.
CHKDSK checks Usn Journal...
Audit of the USN Journal is complete.
CHKDSK is verifying file data (stage 4 of 5)...
File data verification completed.
CHKDSK is verifying free space (step 5 of 5)...
Free space verification is complete.244196000 KB total disk space.
126454172 KB in 238052 files.
109736 Ko 22501 index.
0 KB in bad sectors.
868124 KB in use by the system.
65536 KB occupied by the log file.
116763968 KB available on disk.4 096 bytes in each allocation unit.
61049000 total allocation on the drive units.
29190992 allocation units available on disk.He is so little known about your configuration - because the forums MS Answers do not ask for information, when a new question is asked.
If you run some kind of RAID configuration, you might do better if you describe your RAID configuration and after the actual event that you see in the event log (is it event ID 55?). Then maybe you will get some ideas of the Microsoft Support engineer who might actually work.
You see just this event in the paper at random times or is it when you try to run a specific operation and if yes, what operation triggers the event? Here is an article of MS to help get you started, but if you use Google to search for the error message, you can find more ideas:
http://support.Microsoft.com/kb/246026
If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) US $100.
Here's how to publish events to the event to display the log files:
If you double-click on an event, it will open a window of properties with more information. On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.
When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis. Remove all personal information from your information after you paste If you are forced to do so.
If you paste an event, it will look something like this annoying system startup event:
Event type: Information
Event source: Service Control Manager
Event category: no
Event ID: 7035
Date: 14/07/2010
Time: 17:54:18
User: Jose
Computer: computerDescription:
The Remote Access Connection Manager service was sent successfully a starting control.To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.
You can search for events on the World Wide Web and get ideas. It's where people events they see and then to the top of their questions, ideas and solutions:
http://www.EventID.NET/
If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.
-
__File names are larger than is supported by the file system
I tried to upgrade from Vista to 7, but the upgrade attempted to restore Vista. To exit a loop of reboot, I started from the drive of W7 upgrade went to the command prompt and found a folder with subfolders 25. After moving them to another directory, I was able to get the roll to Vista is complete. I tried to delete the record with 25 subfolders. But I get the error message "the folder contains items whose names are too long for the trash. and "the names of source files are larger than is supported by the file system. Try to move to a location that has a shorter path name, or try renaming to shorter name (s) before launching the operation". I tried shift-delete to bypass the Recycle Bin, but it does not work. I tried moving and able to copy to a different folder after what I was able to remove the old records but could not delete the new folder. Now, for some reason any I can rename the subfolder name (they were all named "Downloads"), but when I did it it would create several subfolders named "downloads". So now I have 60-70 subfolders, rather than the original 25.
Does anyone has a suggestion or a program to help me remove the offending folder? Should I go on my recovery drive and recover Vista of the D: drive on the C: drive? If this does not work, will it reformat the hard drive? If I reformat, how to move to Windows 7? Thanks for any help.
HII secoch ,
Thanks for posting your queries.
I hope you have this problems, but this forum is to help everyone, I want something here too, I did too and it really helped.
First thing is you do not need to download all programs for this.
Like, Windows has problems dealing with extra long path/filenames. If the
combination of the names of access road and closer to 255 characters (127 for
Windows 95/98/me) Windows probably not manage it well, if you try to remove or
Rename it (you can create it, but not change it). The first
thing is trying to rename some of the files which lead to the queue
himself. The directory displayed a level of return, and then select Rename the
folder the file is located in. Try a single letter (of course, to keep a record of what
folder you called that so you can reverse the process!). Then, return to the
file and see if Windows then you can rename or remove. Otherwise, go back
yet another folder and rename this one and so on. At some point, you should be
be able to find a series of folder names of reduced length which you can then
Rename the file to a name that is short enough to allow you to recreate then
the original directory tree and still work with the file in question. In fact, the main goal is to try to make the shortest path of length instead of only the file name and the folder name.I also hope that this help option. If this isn't the case, please after return or PIN me.
I am always available on mail too-> * address email is removed from the privacy *.
-
Create a folder in the file system
Quote from the old forum:
Rohan Messages: 12
Join date: Jun 2008Create a folder in the file system Posted the: July 4, 2008 06:06 Hi all I want to create a folder in the root of the blackberry device file system. Or you can say anywhere in the device file system I want to make a folder through my code. Is it not possible? How should I approach to achieve this?
Thank you
-Rohangmay Messages: 231
Join date: Jun 2007Re: Create a folder in the file system Posted the: July 4, 2008 10:53 To create directories, please see FileConnection.mkdir) http://tinyurl.com/63yj23
Gordon
BlackBerry developer journal
www.blackberrydeveloperjournal.comRohan Messages: 12
Join date: Jun 2008Re: Create a folder in the file system Posted the: July 7, 2008 02:12 Hi Gordon,. Thanks for the reply and the link. I've been there. But I don't get the use of FileConnection.mkdir)
Can you please let me know how extract use mkdir?
Thank you
-RohanRohan
Messages: 12
Join date: Jun 2008Re: Create a folder in the file system Posted the: July 7, 2008 04:00 Hello After trying for a while, I get it how to use FileConnection.mkdir () in my code.
But I am facing a problem here. When the mkdir() is executed, it gives me FileIOException: file system error
Here is my code that attempts to create a directory called myDir
try {}
FileConnection fc = (FileConnection) Connector.open ("file:///store/home/myDir", Connector.READ_WRITE);
If (! fc.exists ()) {}
FC.mkdir ();
}
} catch (Exception e) {}
Dialog.Alert (try ());
}I even tried to give the path like 'file:///store/home/myDir/' because I tried to create a directory. But it also gives the same exception.
Please let me know if I'm doing one any mistake here.
Thank you
-RohanRohan Messages: 12
Join date: Jun 2008Re: Create a folder in the file system Posted the: July 7, 2008 06:10 Hello I think the problem is... BlackBerry does not allow a directory to be created in the folder /store/ the device. Because I am able to create a directory in the directory/SDCard /.
Is this something that we cannot create a directory in the root directory of the device?
Rohan Messages: 12
Join date: Jun 2008Re: Create a folder in the file system Posted the: July 7, 2008 06:17 Hello I'm sorry to keep posting here because I'm trying various things in my code and got to know more. But I write as soon as I get a result, so that it can be useful for those who are looking for the same thing.
I even tried to create a directory in/store/home/user/and it works fine. So that means, we need to create our directories in the directory/store/home/user or/SDCard /.
Please correct me if I'm wrong.
Thank you
-Rohanyog123 Messages: 2
From: mumbai
Join date: Apr, 2007Re: Create a folder in the file system Posted the: July 15, 2008 09:49 Can someone explain this in detail...
When I tried to create the folder on the memory card or memory in the camera, it gives exception as file system error...
Is it related to any authorization or specific parameters... ??
JDE 4.2.1.16
8100 Simulator...
Thanks in advance...Please make sure that the BlackBerry Simulator has been configured to support a micro SD card. For this in the BlackBerry JDE by clicking on the menu Edition, by selecting Preferences, by clicking on the Simulator tab, then on the tab memory and filling of the size of the SD card and the SD card image settings.
Hi yog123,
The code you mentioned is valid, but I guess you make a small mistake here.
Whenever you want to create a directory, you should give "/" after the name directory to inside the Connector.open)
Just put "/" after the directory name "sp" in your code as shown below.
FileConnection fconn = (FileConnection)Connector.open("file:///SDCard/BlackBerry/pictures/sp/",Connector.READ_WRITE);
Please let us know if you still find no problem.
Thank you
-Rohan
-
VM simulator - how to access the file system.
I was wondering if anyone knows how to access the file vmware playbook simulator system.
I don't want access programmatically, I covered, for access to the file system to copy files to the Simulator in shared directories.
When you connect a playbook on the USB, it shows up as a drive, and I would like access to the same playbook vm dir structure to copy files for testing. for example if your s app access the pictures on the camera, I would like to copy some images for the test. Any ideas?
TIA - dave
Search the forum for more information on using 'ssh' to access the Simulator and more specifically help 'scp' or 'sftp' to transfer files to. You will do this in the files under/accounts/1000/shared, and if you're on Windows you will probably be to install PuTTY to do this. Feel free to ask for help more once you have dug through it all.
-
Oracle WebCenter content allows you to export all content database on the file system?
un) I read through the links to understand the properties of table FileCache:
(i) management of a system of storage of files - 11 g Release 1 (11.1.1)
(II) 3.5 Configuration of a system of Bank
I need to clear all user content (refunds) stored in the database (assuming that the storage Type is defined as JDBC) on the file system for a period of time, but don't know how to do step by step. Only fragments of information are present in the links above.
b) I also understand that the content uploaded by the user on the content of WebCenter when the storage Type is defined as JDBC are stored down LOBs format. But is there a way to encrypt content before storing them in the database. I read this link:
https://blogs.Oracle.com/fusionecm/entry/ucm_and_11g_db_securefiles
But simply make the filestorage table as being encrypted, it will encrypt all content that the user downloads?
Hey there,
You can export your file system content using utility to archive it.
not sure the second part but I think that all the documents would get encrypted.
see you soon,
Patricia
-
Database failover - of ASM to the file system
Hello
Based on this article: http://manchev.org/2012/01/building-a-failover-database-using-oracle-database-11g-standard-edition-and-file-watchers/
I would like to know if it would be possible to perform the same operation, but in a case where my source database uses ASM and the failover is not.
I think that this (http://docs.oracle.com/cd/B28359_01/backup.111/b28270/rcmasmmi.htm#i1014926) should apply, but I don't have time to test it myself right now so I thought to try here and maybe get some valuable information/feedback on it.
Thanks in advance.
Greetings,
NACEURYes that's correct.
The control file can be restored using the to the article. Generate a backup of control file of the primary (which is on the FRA) and restore:
restore controlfile from '/backup/controlfile.bkp' to '/u01/control_file_path.ctl';
And the new location of the data files can be defined during the restoration, as you pointed out, with switch datafile at the end:
SET NEWNAME FOR DATAFILE 1 TO NEW; SET NEWNAME FOR DATAFILE 2 TO NEW; SET NEWNAME FOR DATAFILE 3 TO NEW; SET NEWNAME FOR DATAFILE 4 TO NEW; (..) restore database; SWITCH DATAFILE ALL;
'NEW' article is if you plan to use OMF files, through the db_create_file_dest system. If the data files are to be spread on different mount points you can name them individually, as:
SET NEWNAME FOR DATAFILE 1 TO '/path/to/datafile1.dbf'; (...) SWITCH DATAFILE ALL;
Also don't forget to erase (rebuild) your redo log after restoring files, set DB_CREATE_ONLINE_LOG_DEST_n correctly.
-
Virtual machine with Redhat - how to extend the file system
I have a virtual machine with redhat. the machine was created with 20 GB of space. I changed the settings and gave him 30GB.
/ Dev/sda watch now 30 GB
But/dev/map/VolGroup00/LogVol00 shows that the 20 GB.
How can I get the file system to extend with the other 10 GB of space?
Thank you!
Mackman wrote:
How can I get the file system to extend with the other 10 GB of space?
With a lot of attention. I just went through something similar myself. This web site has been very useful: http://www.linuxnetadmin.com/2008/01/how-to-add-disk-space-with-lvm-on-linux.html
The website above describe the steps when adding an additional drive, but the steps for extending on a new partition on the same disk should be similar.
Take a snapshot first in case things go very wrong.
-
How to read the data of BLOB and save to the file system
Hi friends.
I have called DEMO table there image stored as a BLOB. now my requirement is to know how to read the data of BLOB and saved in the file system. is there a procedure
to read the blob object and stored in the file system. pls suggest me with an example.
Thank youHI - don't know what version you have, but have a read through this:
http://www.Oracle-base.com/articles/9i/ExportBlob9i.php
Hoek link is to import the blobs in the db, it is export, to a file.
-
How to make sure the file system gives me write rights? This started last night on my Dell desktop running Windows 10, I also a Dell laptop running Windows 10 and my emails come on it without any problem, but the Office of my home computer is so I need to get my emails on this work. Please answer as soon as POSSIBLE with everything you might need me
you have an anti virus? try to turn it off.
-
I opened my laptop and a pop-up message appeared when I opened Foxfire indicating something was Foxfire not be able to secure my computer through the operating system running on my Mac.
Hello jaynpsfl, this is a true information - unfortunately firefox 16 was the latest version of the browser that supports os x 10.5 - there will be no updates for it security in the future.
-
What can I do when my ps3 displays the file system of the disk drive is corrupted and will be restored?
Disconnect, and then try to connect again. Use a different cable.
-
How can I change a shortcut to a file without going through the file available any longer?
Can someone help me change a shortcut to a file without going through the file available any longer? I saved pictures of my camera on accident as a shortcut and then deleted from the camera until I realize it.
Original title: Ooooppps! Save my photos as a shortcut and then deleted without getting camera.
Can someone help me change a shortcut to a file without going through the file available any longer? I saved pictures of my camera on accident as a shortcut and then deleted from the camera until I realize it.
==============================================
The shortcuts will not be useful if the original files are deleted.There is a chance that you can recover the deleted files from memory
card with the following free software:Recuva - file recovery
http://www.Recuva.com/Recovering files lost with Recuva
http://www.vista4beginners.com/RecuvaVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.
Describe how you run chkdsk.
That is what the report said: you have problems with the sys file?
CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.
If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
Errors each time you run. If this is the case, it could just be the way you run chkdsk.Here's how Microsoft explains this observation:
"... CHKDSK may report that the disc is damaged, even when there is no
current real corruption. This can happen if NTFS happens to modify
areas of the disc on behalf of some programme activities that CHKDSK is
review at the same time. To check a volume correctly, the volume
must be in a static state, and the only way to ensure that the State is
to lock the volume. CHKDSK only locks the volume when /F or/r (which
involves the 'F') is specified. For example, you may need to run CHKDSK more than
time so that it can complete all the steps in read-only mode. »If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way. Any changes made to a NTFS file system modifies the USN Journal. If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.
Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
Restart by answering Yes to the question:Would you want to check this volume to be the next time the system restarts?
If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained. This may take several
chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log. Look in the Application log for
Winlogon events and a source have the date and the duration nearby time chkdsk.It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.
Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!
Maybe you are looking for
-
I know this may not seem like a big problem, but I can't bear to have the button to the left of the address bar in back. I've always had the right of it, more toward the middle of my screen. I can just get used to it completely out there. I hate that
-
How to print to a file? MSG: "unable to open the file, access denied."
How to print to a file? Printing itself works fine, but I get this error message when I select the checkbox "print to file".
-
Why some of my text come as the water is spilled on it
just typing my name and password instruction text under the gaze of boxes like you spilled water on them. soon you can highlight the word and click and it goes to normal. If you have no idea what it is assumed that it is very difficult to read. I did
-
printer does not work in the windows photo gallery only
My printer works fine for everything except when I try to print something in the windows photo gallery, then it says printer is off line? any suggestions out thereThank you
-
... I can no longer edit video in my Windows Movie Maker 6.0... ... After the loading of the Movie Maker,... (I get a pop up that says "collections of file is invalid or damaged a new collections file has been created...") ... I'm able to import my P