Mini/10.11.3 2011, click on turn off without warning, fan now won't stop running.

I guess that everything said. I have a mini, mid-2011, 10.11.3 running.  Subject and then there is that I was working on a document, it just clicked off hour (perhaps as the power had exploded, but there no - room of lights, etc., no change or spots).

It took a few minutes to get it going again. Pushed and held and then released the button of power probably five - six times until I'm anything out of it.

It seems to work fine now (fingers crossed), but fan runs - he began to run on restart and did not stop (it wasn't on until this has happened and no lights rarely at the time, I got this device).

I tried to close ten minutes waiting, but at the start, and whoosh, there is once again the fan.

I'm in my office, my thermometer indicates 20 ° C, and which is about three feet above the mini. The mini sits on my desk, there is an Apple Player DVD top (for years) and three sides are very open/light and airy. Left side is against the singing of a thick book. Here's what it has been for years...

Ideas? Suggestions?

Thank you

John D.

Either way, I saw this: since the last update my fan will not stop running noisily.

But this is an old thread. And I'm not under any temperature special software or otherwise.

(However, I have to the current system four days ago.)

Tags: Mac

Similar Questions

  • Given that the upgrade to Windows 8 my PC turns off without warning after an hour or so.

    Given that the upgrade to Windows 8 my PC turns off without warning after an hour or so. Any ideas?

    My PC is an Asus
    3 GHz Celeron Prosessor
    2 GB of ram

    Hello Kenneth g. Mann

    What version of Windows 8 you have installed on your computer?

    The only thing I can think of that would cause the computer shut down every 2 hours would be if you have the Windows 8 Preview of consumers or the Windows 8 Preview version. These two operating systems were copies of the assessments only and were set to expire on 15 January and 16 January.

    Click the link here , which deals with these issues.

    If you have previews of Windows 8 evaluation, please answer and provide your version of the operating system and any error if set.

    Thank you

    Marilyn

  • Qosmio F30-140 - turns off without warning

    Hi guys!

    It's me again.

    I hope that the last time! After I fix this computer :), I am the sale! 3rd year and still problems. I need to get something new.

    Ok. Now the problem!

    I watched a live steram and laptop just turned off. No system of closing the do nothing! It looked like someone just pressed the button. Screen went black and does not restart.
    Strange thing. After unpluging power, works ok, but only 15 min (hehe - battery).

    Could be graphic overheating?

    Concerning

    Hi mate,

    This only happens if you a video via live stream?
    Well, maybe the laptop is overheating. You should try to clean using compressed air stream. This could blow out the dust from the cooling fans.

    What operating system you are using? Maybe reinstall Toshiba Recovery disk Windows could be useful
    Check it!

  • Satellite M40x-250 turns off without warning

    HII everyone,

    Hope you guys can help me. I have an old Toshiba Notebook (Satellite M40x-250).

    I don't know how old exactly, but I think around 4 or 5 years. Ive never had any problem with it, but now its weird action. Recently, I was typing something and suddenly it just turned itself off.

    I waited about five minutes before I restarted and it worked perfectly again.
    Same thing just happened half an hour ago.

    Now his works once again, with no loss of information.
    My laptop is just getting old, or would be - this other problem that could be solved?

    Thank you!

    Hello

    In my eyes it s typical overheating problem
    As you say it s a laptop plus age (4 to 5 years) and I suppose that the cooling fans have not been cleaned since the first day
    I think that there is a lot of dust and debris that prevents the cooling modules to work with maximum efficiency, this can lead to a higher temperature and shut downs.

    The laptop turns off automatically to prevent the equipment from damage
    Clean the fan using a jet of compressed air! In from time to time, and it helps!

    Welcome them

  • Portege M200 turns off without warning.

    Hi guys,.

    My Portege M200 has just developed a problem today. It stops without warnings or information.
    Event Viewer has not recorded anything out of the ordinary, I suspect that its overheating issue because I'm looking at the time cpu and gpu using speedfan and PC wizard and they both read the time cpu in the 1950s and PCWiz reads the temperature of the gpu in the 57. But I have no info on the fans is this normal? !!! ?? !!

    The fan speed has 1 manual control for a fan (is not one who say, but seem to be the cpu fan) that I now put 100% to test it and see if it stops again. This has been on during about 5 minutes and the cpu temp is down to 36.

    I have no way to control the fan gpu or down the temp on this...

    Is it possible to test the fans / sensors to determine where is the problem?

    Can anyone think of all the other things that I can check or which would do this?

    Thank you guys.

    I think also that occur due to overheating. In such cases, the laptop turns off simply without any warning. Sorry, buddy, but I think it's time for cleaning. Here the question how you want to do. Only or it should be done on a career path.

    Your decision!

  • Bluetooth Smartphones blackBerry turns on and turns off without warning

    Without apparent reason, Bold 9700 connection Bluetooth headest will falter. Audio turns on and off quickly. On the phone, I see the bluetooth symbol turn on and turn off and the indicator of volume contracts and expands. Voice communication is impossible. It is charging and battery-pull not fix issue. This problem occurs even when I turned off the bluetooth connection.

    Thank you for your reply and suggestion. Is going to the tech Department ATT, they replaced the SIM card [said he was old], and the problem seems to be resolved.

  • Windows 7 turns off without warning when you reach the low battery level

    I was using a laptop HP which is upgraded from a family of OEM/RTM Windows Vista Edition Premium x 64 SP1 installation to a cleaning of the Version FULL of Windows 7 Home Premium x 64.  When I used it on battery it takes 25-27% left and it close it self of without any warning that the battery was low.  Then, when I connect it to the power cord and turned on I got the message of recovery Windows error that we will choose between the SafeMode / SafeMode with network/Safe Mode command prompt / start Windows normally and I chose to start Windows normally.  I went in the power and clicked Options on advanced settings for the power management that I use and when I extended battery it says:

    Critical battery action
    On battery: hibernation
    Plugged in: do nothing
    Low battery level
    On battery: 25%
    Plugged in: 10%
    Critical battery level
    On battery: 5%
    Plugged in: 5%
    Low battery notification
    On battery: 5%
    Plugged in: 5%
    Low battery action
    On battery: do nothing
    Plugged in: do nothing
    Reserve battery level
    On battery: 7%
    Plugged in: 7%

    Why have I not a warning when he got low battery level and why it automatically shut down and give me this error message.  How can I fix it.

    It could be that your battery is bad.  With my laptop, the battery lasts a few minutes, and if it passes underneath of ~ 20%, it stops instantly.  So, I just put the battery level critical to 25% and the hibernate on battery battery critical.  Windows 7 should be smart enough to tell you if this is the case (at the bottom left icon will have a red x through it, and if you hover over the battery icon it will say "consider replacing your battery."

  • I'm having the same problem with windows 7 problem is that he stops, turning off without warning at different times

    I tried to close the time downs, tried to see what that the aid program was same and various other things nothing is worm the same is just out

    It could be a temperature problem.  Go to http://www.download.com and download SpeedFan.  It will tell you what are the internal temperatures.  If base temperatures under 50 degrees C, you are very good, over 65 is a problem and between two bears watching.

    If not, you can look at the rather cryptic system event log.  To do that click on start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
    `
    When you get your system in good working condition, I invite you to back up your system up to an external hard drive and it puts regular periodic updates.
    -
    I hope this helps.  Good luck.

  • Satellite Pro A10 just turned off with warning message

    Hello

    I have a Satellite Pro A10 I've had for about 2 years now. During the 2 ~ 3 days I started to have a problem very serious and boring, and you're doing something to run MS word thro to play to a very high technical game (this game can be played on an old 486 no probs) the laptop after about 20 minutes (may vary) usage turns off just with warning message it immediately restarts without any problems and then after different durations down again and again :, (. everything got a clue what the hell happens, please help. :))

    Colin B

    Hello Colin

    Portable described behavior is specific to the overheating of the material. If the laptop is not properly cooled the temperature of the material at the level critical and just turns off without warning.

    Solution is cleaning. The device must be cleaned and dust should be removed. After doing this unit can take a new breath and you won't have this problem again. You will see that run cooling fan will also soften than before.

    Good bye

  • My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

    My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

    If you have not yet installed any Adobe application, try step below and check.

    Step 1

    (1) right-click on the icon in the Finder, then select 'Go - To' folder.
    (2) you will get a text box, type in the following command and then press the 'return '. ( "Don't miss ~ symbol" )

    ~/Library

    It will open the folder of the user's library.

    (3) then navigate to Application Support > Adobe.

    Open the Adobe folder and rename the OOBE, OOBE old and AAMUpdater to old AAMUpdater.

    Step 2

    (1) right-click on the icon in the Finder, then select 'Go - To' folder.
    (2) you will get a text box, type in the following command and then press the 'return '.

    / Library

    It will open the folder System Library.

    (3) then navigate to Application Support > Adobe.

    Open the Adobe folder and rename the folder Caps Caps-old and young OOBE to centenarians, OOBE Adobe Application Manager of Adobe Application Manager.


    Step 3)

    Basket of Adobe Application Manager of Applications > utilities.

    Step 4) [same step again]

    Click on the link below and download Adobe Application Manager and install the same:

    http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

    Once installation is complete, niche is going disappear, and then open the Application folder and locate the icon to launch Adobe Application manager, double-click it and update.

    Once the update is complete.

    Restart the computer once and try to install CS 6.

  • Satellite A200 - screen turns off without reason

    I have a Satellite A200-E530D on Windows Vista Home Premium. For a month, I had something strange happening on my computer, shortly after the start, the screen turns off. without good reason! the only option I have is hard to system boot and everythings... Although a few times after the restart he still went.

    I tried to upgrade to the last poster of drivers (I have an Nvidia Geforce Graphics card 7300 Go with 128 MB of VRAM)

    Another weird thing, Vista SP1 does not install on my machine. tried to uninstall my Anti virus, but that did not help either one.

    Can anyone shed light on my dark screen?

    Hello!

    You have the same problem on an external monitor?
    I m not sure if it s a display problem, mother or software card

    Do you have what display driver installed? You have downloaded the driver from the Web from Toshiba site?
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Good bye

  • G505s - turns off without reason

    My Lenovo G505s turns off without reason, it works for about 5-10 minues after putting in operation then stops as if the battery has been subscribed, but it has full display and is plugged.

    It does not show any screen before it turns, it turns black.

    Also, it become very hot when it shuts and only restarts after a while. the fan is clean and seems to run but it's quieter than usual.

    It's windows 10 but it was for a period of time, the issue of single recnt I had other than what is the power absorbed inside the computer laptop melten but has since been replaced and was subsequently works well

    It turns out that it was overheating, and the main problems was that the bearings on the fan was used, I just had to replace the fan.

  • My power is out and turned off my pc. Now it says my windows in invalid.

    My power is out and turned off my pc. Now it says my windows in invalid.

    Try to do a restore of the system before it began:

    How to make a system of Restore in Windows 7 or Windows Vista ...

  • When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program.

    When my computer is updated before stopping, my friend, turning off the laptop. Now, my laptop does not work. He said dose explore window does not. I can not open any program. What should I do? Please help me. Thank you

    Hi TaiNguyen95,

    ·         Have updates you installed?

    ·         What is the full error message?

    Follow the steps provided by Keith from the link.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  • The default cursor position goes to sleep when I click on turn off computer

    When I click on the Start button, then click on (computer turn off) the pointer snaps to standby mode. How can I configure it to snap to power off the computer

    Hello
     
     
    This behavior is normal and you won't be anle to customize.

    HPE this information has been useful.

Maybe you are looking for

  • Upgrade memory on the Satellite L300 problem

    My laptop is a Satellite L300 PSLB8A 047004. I bought a kit of 2 x 2 GB modules and inserted carefully following the instructions (they clicked in place). When the computer reboots, the power light comes on, the fan was on but no other activity and t

  • If I use Siri with accent UK it can work in the US without any problem?

    Just try to establish if you choose Siri UK will work correctly in the United States?

  • Write access restriction tab missing

    I'm a bit confused, I have 2 routers wireless wrtg 56 g a v 1.0 and 1.1 v or has the 'access restricted' tab is shown in the manual and nor only accpets firmmware upgrade? Seems to be a bit fraudulent to announce something that does not exist. Being

  • Navigation problem.

    I am connected to the internet, learn how to navigate the Web sites with internet explorer 9, but cannot browse the internet with firefox 4 or comodo dragon, every time I open my firefox or comodo dragon I get this message This Web page is not availa

  • How can I insert a flash button in DW CC?

    How can I insert a flash button in DW CC