Replacement of Tecra M9 DVD MultiRecorder Panasonic UJ-852

Similar Questions

• Tecra A8 DVD don't read/write DVD-R 1-16 x.

  Using Sonic Record DLA, Tecra A8 DVD don't read/write DVD-R 1-16 x. Ok work on DVD - R 1-8 x and CD DVD - R 1-16 x has tested successfully on the two recent Toshiba Satellite Pro and HP Office. Have updated the Bios, software DVD-RAM and Sonic DLA.

  Hey,.

  What exactly do you mean? This means that you can t burn DVD-r with 16 x speed?
  In this case, you should check the specifications of your CD/DVD drive. Not all models support this speed of combustion. In addition, I recommend using 8 x only, he speed will give you a better quality of the burned data/average.

  You must also use different types of media. I believe that your other computers have different drives in order to test different mediums. I have a good experience with Verbatim DVD-R.

• In Tecra A8 DVD drive replacement

  My DVD player is down, I already have a replacement drive.

  Does anyone have an idea where the output of the DVD player is located so I can get out? I unscrewed a few screws, but it won't come out.

  Tecra A8 is the same as the Satellite Pro A120

  To swap the DVD drive, you must remove the keyboard.
  It's a little tricky and in my opinion if you n t have much experience with this you should go to a local ASP and ask a technician for help.

  Here, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

• Satellite M30X-134. A device that can replace the "Mat * a DVD - RAM UJ - 820 s'?

  Hello world.

  My laptop is still big, and I don't want to get a new one.
  The DVD combo 'Mat * a DVD - RAM UJ-820 s' is now defective! The nearest Toshiba Servicecenter said that there will be EIGHT HUNDRED DOLLARS and gave no other details or suggestions, but if I find cheaper that they will install it.

  Now Ive has been unable to find the UJ-820 's' but some stores online request for similar models (UJ-846 and UJ - 850 among others) replace it without complications and are like 10 times cheaper.
  If anyone knows exactly what we can replace the UJ-820 s (same characteristics)
  Please let me now, it will be highly appreciated.

  PS. I have the UJ-820 's' think theres also UJ-820 and UJ - 820D I do not know the difference, the manufacturer (panasonic) does anyway.
  My dear laptop is: Toshiba Satellite M30X-134 (PSA72E - 015022GR) (in German)

  Thanks in advance.
  Erika

  Hello

  You can use almost all mast * one car because readers have some major differences. Maybe we can do DVD-R and another can do more media, but if you just need a reader to write cd/dvd then you can catch a UJ-846 or something similar from the connectors and electronics are almost the same.

  Moreover, I know many after-sales Service of toshiba but $ 800? Please can you post which was the service centre. Thank you.

  Greetings and good weekend

• Tecra M7 DVD: CD/DVD RAM drive does not work since the installation of Vista

  I did a clean install on my new Vista Ready M7. He had XP tablet in a first time, and the DVD player worked fine. In fact I used to install Vista (Home Premium).

  Now it doesn't work at all. It runs but does not read. Device Manager tells me impossible to start the device. Tried to update driver and he told me that he has the most uptodate pilot.

  Downloaded all the drivers from the Download Center of Tosh for upgrade of Vista of M7 (who got bluetooth, rotation etc. function properly the screen). But none of the downloads seems to be a driver for the DVD - Ram drive. He cannot find a driver anywhere else (including the Panasonic site).
  DVD player is Mat * a DVD - RAM UJ - 841 s

  Any suggestions?

  Hello

  On the Toshiba driver page, you can find the DLA for Tecra m7.
  Have you tried to install the XP driver DVD-RAM since the Toshiba page on the Vista operating system?

  Maybe it'll market

  But listening the CD/DVD drive uses the current Microsoft drivers that are included in Vista or XP.
  This is why an additional driver should not be necessary!

  An additional proposal;
  Remove the drive from the Device Manager CD/DVD and restart the laptop.
  After restarting again the OS should reinstall the drive and renew the software.

  Another tip:
  -Launch the registry
  -Choose the registry key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  -In the right pane, click UpperFilters and LowerFilters, and then click on remove.
  -Reboot the laptop

• Compatible replacement optical drive CD-DVD for Equium L350 - 10L

  Hello

  a cd got introduced in the drive and I can't, then you need to replace the CD player in my laptop.

  Anyone would be able to tell me what brand/model compatible with this model or I can buy any player?

  "" I saw a slim drive of ' Techguys CD-DVD "PC World - would that be ok?
  I'll find someone else to adapt to it that I don't have any idea how out the CD.
  He previously worked with other discs and it was laid flat in the tray - now the drawer does not close.

  Hope someone out there can give me some advice on why it happened suddenly and what new drive to substitute for the purchase.

  Thank you.

  > a cd got introduced in the drive and I can't, then you need to replace the CD player in my laptop.

  You are not able to open the CD/DVD drive.
  There is a little near the eject button.
  You will need to put a small wire or another object in this set to eject the CD or DVD.
  It is a last option if the eject button does not work.

  PS: in the manual of the laptop you should be able to find information on compatible CD/DVD players.

• Tecra A8 - DVD does not properly

  Hello

  My Tecra A8 has started giving me problems when I want to read a DVD/CD.

  If I launch the system with a disk in the drive, then explore correctly reads and shows the details of the data on the disc, though it may be music, games, DVD, movies etc. but when I go from drives, the new drive is not read disc that already contains data. It opens a popup and start the procedure for the preparation of a new blank disc. It shows all information data to a disc, if the disc is inserted, after the OS has started up?
  I thought that maybe it's a driver that does not work properly?

  Help, please

  Thank you

  What is happening or what appears on the disc if access you the data on the CD by workstation-> CD/DVD drive?

  This problem occurs with all CD or only single data CD?

• Tecra M5 - DVD - Ram is not recognized

  Hello

  This is my 1st post, so this is.
  I have a Toshiba Tecra M5 my old drive has just started to slow down, I bought a new drive Tsstcorp SN-S082H/baby.

  When I slot the drive in the Bay is not recognized by the system immediately unless I'm going to add harware and ASNA for new hardware, and then he picks it up,.
  When stop & restart lappy dvd - ram is not recognized by the system, or BIOS, the light on the flange of the discs is on but when I press the button open nothing happens. I installed the latest firmware, I also don't you any driver of indevice error messages sound as if the reader is not installed, but the light on the drive is turned on but does not open.

  Some1 can help me please?

  Model name: SN-S082H/baby
  Code OEM: TS
  F/W ver. SB01

  Follow the instructions posted by Akuma. Maybe this can solve the problem.

  Also, I checked the Tecra M5 user manual. There is a list with compatible DVD players, and your new drive is not listed. Not every drive is compatible with any laptop.
  If it doesn t work get the reader to the merchant computer buy a compatible player that is listed in the user manual:

  TEAC CD-224EN
  TEAC DV-28EN
  CCP UJDA770
  TSST TS-L462C
  Pioneer DVR - K16
  CCP UJ-841

• Tecra M5: DVD player does not read these mini DVD

  I have canon handycam dvd and mini dvd works on it. A month back I recorded the movie and photos on mini dvd with handycam and ran mini dvd on my tecra M5 player, it worked very well.

  Now after 1 month, I have 5 mini DVD with movies and photos that I took for 1 month of vacation country of diffierent, I tried my best but tecra dvd player does not read these mini dvd, label appears instead dvd player cd player when I put the mini dvd in there.

  All the other standard size DVD, CD works good about it. Its complex and as well as irritating.

  Any suggestions?
  Why his messedup?

  Seems that the lens cannot read this miniDVD s. Maybe cannot calibrate the lens of the drive and the miniDVD is so illegible.
  Try the sascha. Maybe you are a lucky man, and it works.
  If this is not the case, try to remove the drive physically from the laptop. Restart the laptop without the drive. The BIOS and Windows shouldn't t recognizes the drive.
  Then stops again, put the drive in the notebook and the startup of the device.
  The laptop should recognize the drive and must indicate the firmware again.

  I don't know if this will help but it s attemptable m

• Tecra S1: DVD ROM not recognized burner (Plextor PX-608AL)

  Hi all

  I bought a DVD ROM Writer (Plextor PX-608AL) that is not recognized by my Tecra S1 with XP Pro.

  I installed the latest BIOS v2.50 as well as the latest Windows patches.

  To the search, in the Setup of the BIOS (ESC during startup), the drive is not available.

  I tested the drive in my old non - Toshiba with Win2k laptop with no problems.

  Mounting frame is also OK (tested with the original Toshiba DVD ROM)

  Y at - there a trick to getting a 3rd disc part DVD working in a Tecra notebook?
  What is generally a problem

  Thanks for reading my ad and you answers or advice

  Klaus

  Hello

  It won't be very easy get your new work of drive on your S1, I will explain why:

  Most DVD players for laptops (including your Plextor 608AL) do not have jumpers to set
  their place according to the requirements of the laptop.
  Three settings are available: master/slave/CableSelect

  Most Toshiba laptops require the CD to react as a secondary master drive, unfortunately
  a disc factory settings in bulk comes as a disk Primary Master or CS.

  There are two options how to get to missing jumpers to make it work.
  (1) thanks to a new firmware patch that has this option defined by the software based on Toshiba standard or
  (2) by a bridge of material on some pins to the back of the drive.

  As you can see, both options will cancel the guarantee of the reader and are not easy for a techie/technician.

  As for option 1) on the search for a suitable firmware... no there are none available now. I checked the official site of Plextor, but also sites of patch firmware... NO CONCLUSION.
  According to another Forum, business Plextor responded to a request for a firmware adapted with this answer:

  start of quote:
  Dear Sir.

  The drive is detected beeing as a master drive.
  This setting cannot be changed. Are there no rider to do so.
  How mount you the device to your laptop, it's up to you.
  It of different for every laptop and either found in the manual of books or you can request that information from the manufacturers for your laptop.

  Kind regards
  end quote (source: http://club.cdfreaks.com/showthread.php?t=199145 )

  As in option 2), it requires some skills with soldering and I do not think that this forum is suitable for me to explain this procedure. You should google around to find the procedure "pin 47 ashore" on your own, taking all the risks of losing the warranty and/or the drive on your own.

  Concerning

  chain

• Need replacement for M70 - 191 DVD burner.

  My DVD burner on my M70-191 (has my * a UJ-8415) refuses to recognize most CD and fails when you try to burn the DVD, with various errors. I've tried different types and different burning software. Re-installed, cleaned up by car drivers. No luck.

  So, I'm looking for a new drive... where can I buy a suitable replacement?

  Hello Steve

  First of all, I think you should buy the same drive. Doing this will allow you to possibly avoid compatibility problems. I have too many Satellite M70 and the optical disk drive is really good.

  I advise to use Google and you will find many online shops where you can order the new ODD.

• Tecra A6: DVD-RAM UJ - 841S region code is locked

  After playing several movies DVD of my homeland and USA the DVD player is locked... Is this true, that the only way to get t reclamation for the Germany operation, is to replace the unit?... .or at least the ROM of the device...

  Thank you very much for the quick responses!

  Hello

  No, it is not possible to
  Is that you can change the region code 4 or 5 times (I don't remember) and then the setting is locked and it of not possible to change more legal way.

  Of course, you will find many tips and tricks on the internet how do I change the settings I would not recommend to follow these guidelines but can damage the drive.

• Tecra M2 - DVD/CD drive does not read

  I have a Tecra M2 with the DVD Rom/CD burner.

  When a disc is inserted, it runs but does not read - light stays on. After a few eject and reinsert the cycles he usually manages to play the disc. Long the standing problem which affects different DVD and CD discs. Have used a disc cleaner to clean lens.

  Does anyone know if this is likely a faulty hardware or a driver problem?

  Thank you

  Search on the Toshiba site.
  For the Tecra M2 is updated firmware for some ODD available s. To check if you have such a unit.

  In addition, I would like to make a BIOS update. This you can also find on the Web from Toshiba site
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Tecra S2: DVD burn problem

  Hi all,
  We are 4 and we have about the same problem when you try to write a DVD with ours, laptops, with nero6 the error message is usually "there was a problem powe offers" or "invalid destination path" (I try to translate it from Italian error code). In any case, on all our laptop Tecra S2, it is quite impossible to write one DVD correctly. DVD TEAC DV-W28E material, the driver being used is by Microsoft

  Thank you all

  Hello

  First of all, it would be very interesting to know if you are using the Toshiba recovery image.
  Second, have you used different DVD and have you checked if this error message appears with other burning programs?

  I checked the page of the Toshiba driver and found an update of firmware for Tecra S2.
  In addition, there is also a DVD ram driver.
  I suggest you to install these applications.

• Tecra 8100 DVD - ROM SD-C2402

  Hi, am new to the forum.

  I have the reader above, and while it reads DVD pressed without problems, he struggles to read and access my own written records. Some discs, DVD - R written on the same game machine very well, others do not read. The same discs play and read fine in my desktop computer, sony dvd - rom or nec 3520 a DVDRW.

  He refuses to read DVD - RW disks and I was wondering if there is no firmware update that will allow him to read a wide range of discs? If this is not the case, the laser can be adjusted to make it better in reading?

  If none of the above, what replacement unit will fit the existing caddy so that it can be used internally? Should it be a toshiba or are there others that fits? Are all the readers of the same shape and size or not?

  Sorry, it's a bit long, but I hope someone can help!

  See you soon

  Hi Chris

  You know. There are many DVD players on the market and each has different properties. It's not easy to tell which driver can read or write better and which is worse. It's the same with CDs and DVDs in media. If your drive peut t read DVDs, I recommend you to clean the laser lens prudent. Additionally, try different DVD from different manufacturers.

  All readers have occupation different pins. Your device is not compatible with every player. The best way is to contact the service partner and ask them for information more accurately.

  Good bye