Mini laptop HP, no. OPERATING SYSTEM, there is no partition to intall Windows XP

Similar Questions

• Samsung n130 laptop - not "no operating system" message at startup

  My samsung n130 laptop would not start so I ran the program of recovery solution to address the problem, now since he performed this task, he said: no operating system. Nobody knows what has happened and how to fix it. Thank you

  Hi michaelluke,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Disconnect all external devices, start the computer and check if the problem persists.

  Method 2: Start your computer in last known good configurations.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041

  For reference:

  "Operating system not found" or the "Missing operating system" error message when you start your Windows XP-based computer

  http://support.Microsoft.com/kb/321626

  If the problem persists, contact the manufacturer for more help and information.

• I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit. But now the network controller is not working and I can't use wireless internet

  I have re installed the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  I have reinstalled the operating system on my Dell Studio 15 for Windows Vista 32-bit.  But now the network controller is not working and I can't use wireless internet, but I can plug a cable ethernet in there and get online.  What can I do?

  Install the appropriate network device drivers and software from the Dell downloads web site for your particular model, or better yet, tag Service...

• Buy mini laptop on eBay, information system indicates Windows CE Version 6.0

  OK, I bought a mini laptop on ebay and when I got it I started to play around with it and I noticed that his system was in place. I want to know what is windows it because I never heard of him and how do I change the system as it leaves me nothing in the internet because its system is not compatible with the files I opened. This what should I please help me

  * original title - I BOUGHT a NEW laptop AND WHEN IT ARRIVED, I NOTICED HIS NAME SYSTEM WAS UNDER WINDOWS THIS VERSION 6.00, this WHO SHOULD I DO ON IT AND IT doesn't NOT ALLOW ME DO NOTHING *.

  Windows CE is the operating system for PDAS, Windows based Smartphones and other small mobile devices. It is my understanding that Microsoft has begun to use the term 'Windows Mobile' instead of Windows CE after the release of Pocket PC 2002.  Windows CE has become an embedded operating system, in real-time, based on components. She's is more focused only on laptop computers. Many platforms are based on the Windows CE based operating system, including Microsoft AutoPC, Pocket PC 2000, Pocket PC 2002, Windows Mobile 2003, Windows Mobile 2003 SE, Windows Mobile 5.0, Windows Mobile 6, Smartphone 2002, Smartphone 2003, Portable Media Center and many industrial devices and embedded systems. Windows CE even Powered Games for the Dreamcast, was the operating system of the handheld Gizmondo and partially usable on Xbox games consoles updated the.

  There are versions of 'Pocket' of most of the main software that will allow you to open any file that you can open on your Windows desktop. Microsoft Office Mobile allows you to open Microsoft Office files.  Adobe has versions of their software that will allow you to open PDF files. I've been using Windows CE for more than 10 years and I have not found a file that I can not open on my PDA and mobile devices.

  Some of the above information is from Wikipedia.

  I hope you find this information useful.

• Reinstall the USB drivers for laptop G62-367DX operating system windows 7?

  Hello!! I recently got a HP G62-367DX laptop about a month and half ago and a mouse without a wire about two weeks later. The mouse no longer works last week and tried to put his receiver in other ports usb with no luck there. I also tried to do a system restore and uninstall usb drivers and then by using the device driver to find the hardware changes defective. The only thing I got was an error indicating that the software device driver has not been installed successfully. Is it possible to manually install the drivers I need, or is it a problem of operating system that may require a reinstall of my OS? I would greatly appreciate any comments. Thank you.

  You will need to reinstall the original chipset drivers.

  Go to the Start Menu -> click on all programs ->, click on manage recoveryr (open Recovery Manager).

  From there, under "I need help immediately" you can select "Hardware Driver réinstallation"-> click Next.  When you see the list of available selection drivers "ATi (or AMD) Driver VGA" and click Next.  Once it's done, click on finish, then will restart your computer and you can test your system/USB devices to verify that it is fixed.

  If it does not, meet with your specific model number or PN (product number).

• Windows Vista has crashed, "the operating system not found" error, can I load Windows XP on a partition?

  I have an Acer Aspire 5516, with pre-installed Windows Vista. I didn't know that it did not come with a recovery disk UNTIL my system crashed! During a routine virus scan, I got a blue screen saying a major problem has been found and the system has been shut down. I followed the instructions to gracefully shut down my laptop. When I turned this back on after the "Acer" logo he went to a black screen with info on my computer and the last line States "not found operating system". That's when I discovered there was no recovery disc & it is integrated into the system. To access this system you we F8 to enter safe mode, then Alt F10 to access 'erecovery management system. Neither one of these functions operate! Still getting the black screen with "operating system" not found I have a Windows XP my laptop previous. What I was wondering is if I can load on my Acer, possibly on a partition, in order to be able to get into my laptop and save all of my files? I'm terrified of losing everything I have! I have thousands of pictures that I can't replace. If anyone can help please do! I am on a very limited income & can not really afford professional help. Thank you very much in advance!

  Hello

  normally with an Acer you press Alt + F10 at startup to start the hidden recovery partition recovery, not F8, then this combo

  but you do not have an option to save your data, that

  in daily use acers normally have a system partition, a partition of data to save your data, etc. to and also this hidden partition recovery

  and read this on data recovery, too;

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

  read this information about method 3:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

• How to recover the previous operating system when the recovery partition is missing

  Hello, I have a Toshiba Satilite originally shipped with Windows Vista Home Basic Notebook (Laptop), I wanted to try the new Windows 7 Enterprise so I downloaded and installed the trial of the Web of Microsofts site, 90 days, when I installed it, it deleted my recovery partition and my computer came with a recovery CD If there is a way to get a free recovery CD, I have proof that my computer is Windows Vista Basic Home Edition just incase that may never be able to provide me with a recovery CD or an ISO image of recovery via download, I really need to know if this is possible and if so, I'll give you my number of e-mail address and/or phone to anyone who can help me Just reply to my post and I will be alerted, thank you.

  original title: I downloaded and installed Windows 7 Enterprise 90-day trial and he removed my family restore Windows Vista Edition basic partition, now I can't go back to my Windows Vista...

  How to get Vista recovery Media to say things back to factory settings .

  There is no Vista free download legal available.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• err3 Err1 on startup. system will not f8 or f11 and says no operating system found? What the? A windows vista family premium, a second ago...?

  I hope someone can help.  I can't fly on the f11 or f8 function keys. I have tried bios updated default did not work.  Says Bios and video are shawdowed.  No TPM or TPM has problem.  Fixed Disk0 and fixed Disk1 - F.2a Phoenix BIOS 4.0 Release 6.1 version.  So can't do the system restore? Where is my operating system?  I lost everything in C and D drives?  System will not start or start at all.  Do I have to re - install the OS Windows Wista?  Work about to go back and fix?

  Hello SteveO_1968,

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted.
  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  4. Click repair your computer.
  5. Click the operating system you want to repair, and then click Next.
  6. In the System Recovery Options dialog box, click command prompt.
  7. Type Bootrec.exe, and then press ENTER.

  Note To start the computer from the Windows Vista DVD, the computer must be configured to start from the DVD drive. For more information on the configuration of the computer to start from the DVD drive, see the documentation provided with your computer or contact the computer manufacturer.

  Bootrec.exe options

  The Bootrec.exe tool supports the following options. Use the option that suits your situation.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  / FixMbr

  The /FixMbr option writes a MBR compatible Windows Vista on the system partition. This option does not overwrite the existing partition table. Use this option when you need to solve problems of corruption of MBR, or when you need to remove the non-standard code from the MBR.

  / FixBoot

  The /FixBoot option writes a new boot sector on the system partition by using a boot sector that is compatible with Windows Vista. Use this option if one of the following conditions is met:

  • The boot sector has been replaced by a non-standard Windows Vista boot sector.
  • The boot sector is damaged.
  • An earlier Windows operating system has been installed after the installation of Windows Vista. In this scenario, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe).

  / ScanOs

  The /ScanOs option scans all disks for installations that are compatible with Windows Vista. In addition, this option displays the entries that are currently not in the BCD store. Use this option when there are installations of Windows Vista which is not in the Boot Manager menu.

  / RebuildBcd

  The /RebuildBcd option scans all disks for installations that are compatible with Windows Vista. In addition, this option allows you to select the facilities you want to add to the BCD store. Use this option when you need to completely rebuild the BCD.

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• My hard drive crashed and the only disk operating system that I can find is my Windows 7 upgrade disk. Can I do a full install on a blank disc of this?

  My title pretty much sums up my problem.

  I need to buy a new hard drive.  All I have is the Windows 7 upgrade disk I bought for some time.  I can the Windows 7 installed on this drive, or I have to buy a copy of Vista/XP to install and upgrade?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Very Net-delay connection on Lenovo laptop with Windows7 operating system

  my laptop lenovo with windows7 after start takes more than 30 minutes to connect to the net, while my older laptop with windows vista compaque connects to the net in the 2minutes.automatic updates are active. I use the Wifi modem. McAfee Antivirus is installed. Kindly help.

  Hi rajendrarao,

  Thanks for posting your query in the Microsoft Community. According to the description of the problem, it takes a long time to connect to the internet. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  Why can't I connect to the Internet?

  You can see these articles for more information:

  How can I troubleshoot network card?

  How to reset the Protocol Internet (TCP/IP)

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• How to access a printer connected via USB on an operating system Vista (Dell desktop) to a (portable) Windows 7 operating system

  There is a slavd for Dell 926 printer via the USB port of a computer Dell under Vista SP2.  I use a Dell Studio 15 laptop and trying to network two computers so that we can share the printer enslaved.  I tried several times to do so via homegroup.  The Vista computer sees the mobile network, but I can't do the printer share properly.  All answers there?

  Hello

  Collective housing is for Windows 7 computers to network with other Windows 7 computers.

  http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finish

  If you want to share files and printers with computers running earlier versions of Windows, see networking of computers running different Windows versions.

  See you soon.

• I want to install Lightroom 6 on a Windows 7 operating system. I get the error message Windows Vista not supported. How to spend it?

  I've seen comments on this more soon but I can't find the discussion now.

  trying to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

• What operating system is on my partition (hp 3500 pro)

  Hello.

  My 3500 pro comes with windows 7 pro is installed and windows 8 pro "recovery disc".

  I see a recovery partition, but I was wondering which OS is on it. 7 or 8?

  I was going to install a DVD burner and create backup media but if 7 is on the partition, it will be may not be not necessary.

  Thanks in advance.

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Make sure that you create your HP Windows 7 restore / recovery discs before you edit or change anything. If you don't create these disks, you will need to purchase Windows 7 restore / support of HP recovery if you decide you want to go back to Windows 7.

  The HP Recovery partition contains Windows 7 Pro and you create your HP recovery media before using the included Windows 8 Pro disks. It is usually professional HP computers that come with downgrade rights and downgraded the OS installed.

  The computer format microtour HP Pro 3500 is a class computer business and as such, may be the best answer to your question in the HP Enterprise Business Community. It is also possible to contact the HP Business Support Center for assistance with your question.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• my laptop starts up then the screen goes black and says no operating system found

  My child put their hands on my laptop now it starts and then it says no operating system found, or there is another sign that comes up it says

  Security Accounts Manager intiliaztionfailed because of the following error: the handle is invalid. Error status: 0xc0000008 please click ok to shut down this system and reeboot in safe mode / check the log of the events for more information

  the laptop say no operating system found is when I put the xp disk in I thought the disc would have fixed it... .as now you will probably laugh like its obveous I nothing about computers of any help would be much appreciated because it wasn't a cheap laptop and I need to keep the best care that are out of my reach of girls, but he himself is a task... Thanks in advanve david

  Please see: "operating system not found" or "Missing operating system" error message when you start your Windows XP-based computer

• PROBLEM WITH MY OPERATING SYSTEM AND LAPTOP COMPUTER PART 3

  Hi all

  I speak not of what I already writtent here on my computer issues have, if you feel lost just report to my previous post below. Thank you all for your help. The following messages appear on the screen of my laptop:

  'msnmsgr.exe file corrupted the file C:\Users\MYNAME\AppData\Local\Temp directory is corrupted and unreadable. Please run the ChKdsk utility "

  "Skype.exe file corrupted the file C:\Users\MYNAME\AppData\Local\Temp directory is corrupted and unreadable. Please run the ChKdsk utility "

  "OSA.exe file corrupted the file C:\Users\MYNAME\AppData\Local\Temp directory is corrupted and unreadable. Please run the ChKdsk utility "

  At some point of time, I got the following message "cannot install required Windows files make sure all files required for installation are available, and restart the installation of the error Code: 0 x 80070571" after trying to reinstall Vista.

  Today, I tried to install WinCleaner OneClick to solve problems has my laptop, but I got this message: Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-B29TV.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-AO2P4.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-819TT.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-UARNT.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-J8ISF.tmp error 1392: the file or directory is corrupted and unreadable".

  When I open the device under Network Manager maps I saw a yellow triangle with an exclamation mark in front of Microsoft ISATAP #2 with a message "the device status this device does not work properly because Windows cannot load the drivers required for this device (code 31)"

  Below, you will find all the information you need to help me solve these problems with my laptop, because I do not have how to keep a current thread. Once again, thank you for your help

  FIRST POST OF THIS THREAD

  Greetings to one and all and I thank very you much for your help to help me.

  I have a laptop Dell Inspiron 1501 with Windows Vista Home Basic AMD Mobile Sempron processor. Recently, I tried to upgrade the free version of my Antivir Avira antivirus for a trial version, but during the process, I lost my internet connection. Sometimes, my network shows another "Local and Internet" and "Local" only. However, in both cases I am not able to connect to the Internet. Whenever I try to open a page in the browser, it is blank and nothing appears on the screen... I also try to reinstall the operating system, but since I can't access the Internet when I reached the point of the process called "GET IMPORTANT updates to UPDATE for the INSTALLATION" where I have to choose between two options a) go online to get the latest updates (recommended) and b) do not get the latest updates for facilities , I can only opt for the other that says that the installation may fail. Therefore, it seems that I cannot even reinstall the operating system. In addition, I often small windows to appear on my screen as "msnmsgr.exe" "skype.exe" "OSA.exe" file corrupted with such messages "the file C:\Users\ myname\AppData\Local\Temp directory is corrupted and unreadable. Please run the chkdsk utility ". However, the problem is I can't run the check disk, because every time I have it try I got the following message "checking file system on C, the type of files is NTFS one of your disks needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue"until I read the whole message again appears" the disk check was cancelled ". I am not able to get the help and Support Windows open, but on the window I only heard the message "you have lost your connection using Windows and support". I don't know what to get my computer works well and my connection internet back. Someone here tell me step by step what to do to solve all the problems mentioned above? I am very grateful to each of you. Please, note that from my computer I have not access to Internet, so tell me any solution which will take me to use my computer to connect to the Internet. Sorry for the length of my post.

  PS at the beginning of this problem I used to have errors with their code on the screen of my laptop, but unfortunately I did not take account of their > more, for to appear the problem worsens my computer was a bit slow

  SECOND POST OF THIS THREAD

  First of all, thanks a lot to you all and especially to the Lorien-SpiritX and their insightful answers. As they both suggest to me I tried sfc/scannow and I received the following message on my laptop screen "start the phase of checking system scan audit 44% complete Windows resource protection could not perform the requested operation"

  I did also check CHKDSK/f/r utility Office and I received the following message "the type of the file system is NTFS cannot lock drive current CHKDSK cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts "and I answered Yes

  In addition, I tried to use my CD to reinstall my operating, but if it starts well by copying files to the end of the process, when the second stage of the process "expand our files" starts, it stops at 27% and never goes further.

  These are all questions, added to all that I already mentioned in my first post with the same title

  This looks like failing hardware, not software. I would look at the hard drive first, and then the RAM and the motherboard.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If the computer is still under warranty, contact Dell technical support.

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!