PROBLEM WITH MY OPERATING SYSTEM AND LAPTOP COMPUTER PART 3

Similar Questions

• Wiped a computer due to problems with the operating system, but do not have any media to reinstall. Help.

  No operating system

  Hello

  I bought a second hand computer and there is no backup of the operating system CD. He had problems with the operating system start so I wiped it, but now I have to re - install.

  Would it not possible to obtain another copy of the operating system for that computer?

  All the best

  Dean

  Hello

  These are forums for Vista, so vista information is provided

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Software for printing device Kodak esp7250 does not load as areas appear gray and Kodak said that it is a problem with the operating system 7

  I have problems trying to reinstall my printer software Kodak esp 7250.  The area where you register the software is empty and the Browse button to choose a place is gray, so it will not go any further because if you then choose then says invalid path.  Of course, it's an invalid path because it will not choose an or allow me to choose one.  I contacted Kodak and after working with it for a while, they said it's a problem with the operating system.  I have Windows 7 on a laptop Gateway.  I need my printer and get very frustrated because nobody seems to know how to solve this problem.  I was able to use it when I got to the laptop, but suddenly one day it wouldn't work.  Help, please.

  Hello

  Thank you for your response.

  Make the SFC scan and check the status of the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I would also advise you to check the status of the issue in a new user account.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• problem with restart operating system upgrade

  I recently bought a refurbished mac model identifier: imac8, 1... I bought and installed snow leopard operating system and I am now trying to upgrade further, the problem I have is when I do an upgrade that the computer does not restart, it just goes to the star screen and do not turn off and restart it, how do I solve this?

  If the computer still has installed 10.6.3 according to your profile and then download and install Mac OS X 10.6.8 v1.1 updated Combo. Then, open the software update (System preferences - software update) and see if there are several updates to the system. If there is, install them all!

  If you want to install a newer version of Mac OS X, then you will need to make sure that the computer has 4 GB or more of RAM (your sleeps 6GB) and then navigate to the Mac App Store and install El Capitan 10.11.1

  If you continue to have problems, maybe a visit to the dealer that you buy is in order or you will need to find a CENTER in your area that can help. Apple stores won't work on a 2008, it is considered a legacy machine.

• problem with the operating system 64-bit client

  Hi, I'm having a problem installing of operating, including windows server 2008 R2 64-bit 64-bit, but even other OS gives the same error

  I tried with vmware workstation 6.5.1 and 7.1.0 from the VW console and check utility also said, that the host is NOT capable of running a 64-bit under this product vmware host.

  My guest operating system is windows XP Professional SP3 32-bit

  the processor is an Intel Core 2 E8400 3 GHz and the support for virtualization is enabled in the bios I looked into it and ran the securable application, he said: "Hardware Virtualization locked IT.

  What could be the problem?

  The VT in the bios was already activated, in any case I turned off the PC too.

  I checked today with the Intel Processor Identification Utility and it says for Intel virtualization technology: No. cannot know what is missing.

  This looks like a buggy BIOS. What system using (name of seller/model). Looking for an update of the firmware on the suppliers Web site.

  André

• problems with 5.1 system and windows 7

  basically I can't access the configuration 5.1. When you select "manage audio devices" im given the device twice 2-high definition audio, and when I select Configure im only given 1 option which is stereo.

  my 5.1 using 3 ports which seems to be another problem, even if I plug the laptop (inspiron 1525), he doesn't play them in the series it will play only one at a time every 3. It was not a problem when using the laptop originally, but I installed windows 7 and it works

  Hello

  Step 1:

  Run the audio Troubleshooter of game for your computer and check if all of the problems detected it. To open the troubleshooter, follow the link below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Step 2:

  See also the article given below for more details on the configuration of the speakers.

  Get high definition sound and music from your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-high-definition-sound-and-music-from-your-computer

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fixed the pc and now problems with the operating system.

  So a few weeks ago I had replaced my motherboard fried and all the rest. Windows claimed to resurrect my computer, my copy of Windows 7 is not legitimate and does not accept my product key. Any advice on how to fix this?

  If your license of Windows 7 comes with the previous motherboard, it is not transferable to a new motherboard.

  If it is a license upgrade of retail that you bought in a store, the motherboard, you take a match it must have a previous qualification licence.

  You can also try the following:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Problem with a wireless mouse when laptop computer HDMI is connected to a TV

  I have a HP Pavilion G series laptop PC, when I connect to the TV using the VGA interface I have no problem, when I connect to the TV via the HDMI so I have the problem. I use a Microsoft 2.4 ghz wireless mouse, laptop connected to an electrical outlet, new batteries in the mouse, if I move the mouse more than 1 foot of the tower top it becomes useless, erratic, moves 6 inches at a time, or not at all, totally out of control. The laptop is about 2 feet from the TV due to the length of the HDMI cable, and I am sitting about 12 feet out in front of the TV with the mouse. Like I said, no problem if I find the mouse in 1 foot from the laptop and no problems even 12 feet away using the VGA interface. Production of mouse says that the mouse has a range of more than 20 feet. Someone has an idea of what might happen? Last note, I also looked at the use of the processor at the time and it is only 8%. The mouse model number is 3500

  I got it fixed. I replaced the HDMI cable, no change, I tried another TV, no change, I moved the feet 12 laptop away from the TV, no change, bought a Logictech M315 mouse, same technology as the MS3500 and everything's fine. Does a lot for the MS3500 mouse.

• problems with an operating system

  Theme font & size changer may work with firefox under windows, but it does not work with ubuntu. Not at all.

  so in ubuntu, you can change the font size for Application, Document, Desktop, fixed width and the window title. in your personal preferences.

  but no matter what, using firefox, or no, theme fonts content font size is 8 points.

  It is a known problem.

  Hello

  You can try to set a Minimum font size in Tools (Alt + T) > Preferences > content > Advanced (under fonts and colors).

  Options > content

  Tools > Options

• BSOD BAD_POOL_CALLER error with my acer E1 - 572G laptop computer running Windows 8

  Hello

  Nice day

  I also have a problem with my acer E1 - 572G laptop computer running Windows 8.

  Only during the restart of my laptop, it's always show the BAD_POOL_CALLER error code

  and a blue screen.

  She does whenever I want to restart. Stop and then put on now displays errors.

  I encountered this error several times.

  I downloaded the minidump files.

  The link to the files is:

  https://www.mediafire.com/folder/3nn883rs78p4qqe,bfcx73m2a3dodp6,edk1ebfdmezdakt,ce7mbir7enbznjr,qzdxpddiurioywy,mctv8lmlptdr86t,aae9dt4xxhwkq36,4ncglnqhedwuwnp,vjaejk18xob2b2w,03cjeaaanxyfs6a,ltrnk3oh4jq3e00,v2l8kyaawhnyluq,ttt1t5obw5gcayc,8oobh626v64sp0h,wmkwawbugww12et,qgrrwp1xrp3w2yk/shared

  Kindly let me know if all minidump files all belong to the same problem.

  Please please help me.

  Kind regards

  Ashaikhd

  Separated from: https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/badpoolcaller-BSOD/202df5d4-b74c-4489-b773-ac40e286aec7

  These were related to bScsiSDa.sys SD 3.0 Controller of Broadcom Corporation in conflict with your two applications of malicious software.  I remove both (the Defender built in use) and install the latest broadcom driver available, even if it is the same date that drivers become corrupt

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\070514-45203-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 8 Kernel Version 9600 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9600.17085.amd64fre.winblue_gdr.140330 - 1035
  Computer name:
  Kernel base = 0xfffff800 'f1e05000 PsLoadedModuleList = 0xfffff800' f20cf2d0
  The debugging session: Fri Jul 4 20:21:13.557 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:20.332
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..........
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  BugCheck C2, {7, 1200, 247c894c, fffff801d2f6a733}

  WARNING: Unable to verify timestamp for bScsiSDa.sys
  ERROR: Module load completed but symbols can be loaded for bScsiSDa.sys
  Probably caused by: bScsiSDa.sys (bScsiSDa + e656)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  BAD_POOL_CALLER (c2)
  The current thread is doing a bad pool request.  In general, it is an IRQL bad or double freeing the same allocation, etc.
  Arguments:
  Arg1: 0000000000000007, attempt to free pool which was already freed
  Arg2: 0000000000001200, (reserved)
  Arg3: blocking content from the memory of the 00000000247c894c pool.
  Arg4: fffff801d2f6a733, address of the block of pool is released

  Debugging information:
  ------------------

  BUGCHECK_STR: 0xc2_7

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 0

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  LAST_CONTROL_TRANSFER: from fffff800f209b42a to fffff800f1f58fa0

  STACK_TEXT:
  ffffd000 '784b26a8 fffff800' f209b42a: 00000000'000000 c 2 00000000'00000007 00000000'00001200 00000000' 247c894c: nt! KeBugCheckEx
  ffffd000 '784b26b0 fffff800' f2253ee8: fffff800 'f20a8300 00000000' 00000082 ffffd000 '784b27a8 fffff800' f1e35711: nt! ExFreePoolWithTag + 0x114a
  ffffd000 '784b 2780 fffff801' d2f6a656: 00000030' ffffe001 'd7fcfaa0 00000000' ffffd000 00000000' 00000000 b 784, 2910: nt! RtlFreeUnicodeString + 0x18
  ffffd000 '784b27b0 00000000' 00000030: ffffe001 'd7fcfaa0 00000000' ffffd000 00000000' 784b 2910 00000000 00000000': bScsiSDa + 0xe656
  ' ffffd000 '784b27b8 ffffe001' d7fcfaa0: 00000000 ' ffffd000 00000000 ' 784b 2910 00000000 00000000' 00000000': 0 x 30 fffff800
  ffffd000'784b27c0 00000000' 00000000: ffffd000' 784b 2910 00000000 00000000' fffff800'00000000 00000000 00000000': 0xffffe001'd7fcfaa0

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  bScsiSDa + e656
  fffff801'd2f6a656 488b8df0000000 mov rcx, qword ptr [rbp + 0F0h]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: bScsiSDa + e656

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: bScsiSDa

  Nom_image: bScsiSDa.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 51e9aefb

  FAILURE_BUCKET_ID: 0xc2_7_bScsiSDa + e656

  BUCKET_ID: 0xc2_7_bScsiSDa + e656

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0xc2_7_bscsisda + e656

  FAILURE_ID_HASH: {cff94011-1a4c-5d32-9ebb-2de22db811dd}

  Follow-up: MachineOwner
  ---------

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• I bought Adobe Acrobat Pro for MAC (version 9) earlier and since then got a new computer. Version 9 no longer works with my operating system. Is there a work around to having to buy a full version of this product once again? Doesn't seem right, if it's th

  My analysis is contained in my question.

  Basically, I bought Adobe Acrobat 9 and now am unable to operate on my new computer.

  Do I have to buy a new version of Adobe Acrobat Pro? It seems that there should be an upgrade, rather than having to buy the product again?

  Thank you

  ~ j

  Hi jklebenov,

  As I mentioned before that Acrobat 9 is not compatible with your operating system Adobe Acrobat required configuration.

  Please use the application in a consistent environment to make it work.

  Kind regards
  Nicos

• Why the books are grouped and preinstalled with the operating system?

  It's complaints

  My Portege has Windwosw Vista. I didn't want to buy Vista, but they were only selling with him and no other choice was possible to purchase.

  First of all, my laptop had problems to install Windows updates. I could not connect my institution's Internet System. I had to reinstall the system again.
  It's a waste of time!

  After re-installation of the button for the sound on the outside Panel does not work correctly.

  Also, when I try to stop the laptop sometimes it restarts itself - he doesn't stop!

  Secondly, I had a problem with the laptop, when an opportunity to visit a well-known site, it serves to block itself.
  Once, when he is blocked, I had to restart and its screen remained black. They took for repair. It was delivered later - repaired, but with a defect on the screen!
  What a... workers!

  When I bought this laptop he had an offer with the update of Vista with Windows 7 after their release.
  Wonderful. But just note, Toshiba has the highest price of the offer, compared to its competitors - 30 (or £) against 15 for others, which of course I'm not going to pay.

  I already paid for Vista, which is incredible, and I knew, but I had not choice not to buy!

  All right, so there is still competition in the market, several possibilities are present - install Windows cracked, switch to Linux or just buy an Apple!

  Please, take this comment seriously! And please, stop with group buying, no matter what the benefit is. It won't work for long.

  Hi mate

  Fact is that most of the laptop manufacturers sell the computer and laptop computer with a preinstalled operating system. So I wouldn't blame Toshiba or other brands for which

  You get a new computer/laptop with a new OS.
  During the past 20 years, Microsoft released 3.0 Win, Win 95, Win 98, Win NT, W2k, Win XP, Win ME, Vista and Win 7, I remember that all my computers or laptops were grouped with these operating systems

  Toshiba offers the notebook with a clean image and you can also create a recovery disk (so don t need to buy anything if you need t n)
  Of course, each of us can install a clean OS, but there are a lot of people who are happy with such image pre-installed because everything is pre-installed and configured.

  Many people have no knowledge of computer wide and are really recognizing that everything is pre-installed and the configuration does not have a lot of time

  With regard to the question of the laptop;
  What to say; you had a bad luck that something was wrong with the laptop. This can still happen that my new LCD TV other manufacturer, was dead after two weeks, I called ASP, then replaced the screen now is ok

• Reinstall WIN XP SP3 to new computer with no operating system

  I would like to move my WIN XP SP3 old laptop with no operating system

  Thank you

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP on your new computer install all device drivers, starting with the mother/chipset, LAN, Audio, USB, SATA card, drivers, and so on.

  Notes:

  If there is no XP driver not listed that your computer is not compatible Windows XP.

  You must uninstall the old computer XP, if you plan to use the same XP product key.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Having a problem with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular.

  I recently tried to remove malware on my Vista based laptop Toshiba.

  
  

  I recently tried to remove malware on my Vista based laptop Toshiba. Malwarebytes helped, but I still have problems with a redirect virus and the refusal by the system to allow me to download various things, Windows Live Mail in particular. I tried to download from a copy of the USB stick to a clean computer, but he still refuses to load telling me to check my internet connection, which is fine for general use. Please help I get crazy and do not forget that I am a pure layman - thank you if you can help - Kidso

  I found that the best place to ask this type of question is here: -.

  http://forums.ComputerActive.co.UK/forumdisplay.php?f=20

  There are some very good people out there who helped me (successfully) on 2 occasions.

  Good luck.

  I'll be interested to know how you go.