Mini-Player lack of buttons according to research/Up

Similar Questions

• Windows Media Player is not listed under the toolbars, and I can not get the mini Player to work

  I have Windows Media Player 11 and can't seem to get the mini Player to show when I minimize it.  When I right click near the clock, what I see under the toolbars is links, language bar, desktop and quick launch bar. What happened to the option of the Media Player window, and how can I get it back?

  Hi RachelAllee,

  1. you remember to make changes on your computer before this problem?

  You can again save wmp.dll, and then search for the question.

  a. Click Start, run and type:

  regsvr32 "%programfiles%\Windows Media Player wmpband.dll"

  b. press enter and restart the computer and check.

  Hope this information is useful.

• Messenger does not update and continues to fall. Have tried different things according to research on the web without success. Very frustrated!

  Messenger does not update and continues to fall. Have tried different things according to research on the web without success. Deleted Outlook connector, nothing helps.  Any ideas? OS is XP SP3.  Very frustrated!

  The message "network error has occurred. trying to read the file"C:\windows\installer\messenger.msi"

  Have removed Outlook connector, nothing helps.  Ran "msicuu2.exe" nothing helps.  Off Zone Alarm - No difference.

  All other programs except the AntiVirus closed during installation.  Would appreciate any help please.

  Hi a_wiseowl,
   
   
  It has a similar post here as well. Check if the advice given in the post will help you.
   
  Update MSN Messenger to Windows Live Messenger 2011, code error 80070643.
   
  If it does not help, post your query in Windows Live Messenger Forums for assistance on this issue.
   

  Kind regards

  Divya R - Microsoft technical support.

• Windows Media Player 12, mini Player?

  I tried to get the mini-player in WMP 12 by following the steps here.  Whenever I run the command prompt, I get the following error message: module "" C:/Program"failed to load.  Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. DLL files.  The specified module could not be found.

  I also tried to add visualizations of musical colours in WMP in following here.  However, when I run the command prompt, I get the following error: the module "wmpvis.dll." may not be not compatible with the version of Windows that you are running.  Check if the module is compatible with a x 86 (32 bit) or x 64 (64-bit) version of regsvr32.exe.  I use x 64 but do not know if the downloaded module is 32-bit or 64-bit.

  Suggestions to these two problems.  I'm not having much luck with Windows 7 running command prompts.

  I have it.  Thanks again for all your help.  I really appreciate your patience.

• code to select the radio button according to requirement

  I need a code that selects a certain radio button according to requirement...
  also how disable the option button using codes...

  Hello

  To select a particular option button, assign the value of this radio button in the Radio button group.

  And to disable a particular option button, write,

  SET_RADIO_BUTTON_PROPERTY('', '', ENABLED, PROPERTY_FALSE);
  

  Kind regards

  Manu.

  If my answer or the answer to another person has been useful or appropriate, please mark accordingly

• For Adobe Flash Player 12 Setup button does nothing in FF26

  The only option now on the Adobe site to download FP 12 is to click on the button 'Install '. In other words, is no longer an option for dl just an exe file and then run it to install the player.
  The Adobe page correctly recognizes I use FF and Win7 32 bit. But when I click on the 'Install' button, there is no activity of the installation. Instead, I get redirected to another location on the Adobe site, a generic page listing various Adobe sw IIRC.

  Versions of Flash player latest here:

  • http://www.Adobe.com/special/products/flashplayer/fp_distribution3.html

  You can check the version of the current Flash Player here:

  • http://www.Adobe.com/software/Flash/about/
  • http://helpx.Adobe.com/Flash-Player.html

• Windows Media Player cannot synchronize with the Sansa player. Sync button frozen

  OT: Button of Windows media player is frozen

  I have a sansa and I tried to synchronize new songs from Windows Media player but the sync button is frozen, it wont let me press the key.

  Hello Natalie_Haaga,

  1. were you able to synchronize this device with Media Player before?

  2. is the player detected in Windows Explorer?

  First check to see if the drive is detected on your computer. Try to copy the files of music from Windows Explorer.

  Most MP3 players will appear as a "disk" on your computer, and you can browse the files on them by simply opening.

  If you can do this, you should be able to copy / delete / move files between the MP3 player and the computer.

  Also try to set media player to manually synchronize with Media Player. This article should help you with that:

  http://Windows.Microsoft.com/en-us/Windows7/sync-manually-in-Windows-Media-Player

  I also see that some users have been able to synchronize this by changing the settings of the player and set it to mass storage device.

  I suggest you consult the manual on how to change this setting for mass storage device and to check if you have the same problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourForum of Microsoft answers Feedback and let us know what you think.

• How to disable or enable the button according to the requirement

  Hi all,
  I get the new requirment finished the 50% task.now .i, I get mew problem.actully my requirmnet is already a custom form is there, placed the button to a custom form .click on this new form will be opened.
  but this button will activate based on the condition.in my first my form (custom) paid if he calls rejected rejected value.this value displays some amount vallue.here rejected is zero (0) then button will be disbale, another rejected value great then zero(>0) then one button enabled.any you help me...
  
  
  Kind regards
  Stéphane.

  994418 wrote:
  Hi hamid, this code works correctly, thank you
  IF NVL(:REJEC_AMOUNT,0)<= 0="">
  SET_ITEM_PROPERTY ('BUTTON_NAME', ENABLED, PROPERTY_FALSE);

  ON THE OTHER
  SET_ITEM_PROPERTY ('BUTTON_NAME', ENABLED, PROPERTY_TRUE);
  SET_ITEM_PROPERTY ('BUTTON_NAME', NAVIGABLE, PROPERTY_TRUE);
  END IF;

  Kind regards

  Hi stephane.
  Other people may get help from your thread if you mark the correct answer and add [solved] in the subject line. Most likely, you did not read the following link.

  
  
  • Oracle Forums FAQ
    
  • Before posting on this forum please read
    
  • 10 Commandments for Forums OTN Member
    
  • How to ask questions in an intelligent way
    

  Following these simple guidelines will ensure a positive experience in any forum; not just this one!

  Hamid

  If someone answer is useful or appropriate, please mark accordingly. *

• Presenter 9 - lack of buttons?

  I have two questions regarding the installation of anchor 9.

  First of all, my business office unfortunately ordered the DVD instead of let me download - is - it possible to download instead of use the same license key?  The reason I ask because my computer is not a DVD player, so if I have to re - install (which I'm sure I do... see below) I have to get an appointment with the people in our network to bring on an external drive, and that takes forever.

  Two, I have installed presenter 9.  He asked if I had 32-bit or 64-bit, so I said 64 (which is correct, FWIW).  Fortunately he continued to install and I had no error message.  So, I opened powerpoint to add audio to a presentation, and although there is now a tab 'adobe' at the top of my powerpoint interface, there is no button on audio.  Help files suggest it would... the only buttons I have is related to the creation of PDF files.  Anyone?  I think it's weird that I have not "get any error installation messages, but still it's still does not work as advertised."

  Thanks for your suggestions.

  is it possible to download instead of use the same license key?

  Download the trial version on the site of Adobe

  http://www.Adobe.com/cfusion/TDRC/index.cfm?product=presenter&loc=en

  Enter your serial number to authorize.

• Lack of buttons on the top window right in Thunderbird

  My problem has already been discussed here:

  https://support.Mozilla.org/da/questions/987606

  This thread has been archived, so I can't comment on that. I have the same problem as described here: every now and then, the three buttons on the right top of the page in the main Thunderbird window stop working. In fact, they are not yet drawn more. I suspect that this may be related to (UN) hibernation the machine because the problem started occurring at the same time I started using Hibernate in Windows 7. Alternatively the bug was reintroduced in a Thunderbird update occurring between one and two months.

  No other program of your use XUL as a window definition language is is my guess. You are using a non-standard theme? This happens in the VNC or only after the event?

• 360, as a dvd/cdrom for the mini Player

  Mac total noob here, I bought a mac mini1.4ghz today, first of all, I intend to use it as a dock at high power for my contact gen 6 and as a jukebox. because I can't afford a dvd/cddrive this week and I was wondering if I could use my xbox360 as drive for ripping music CDs to itunes or watch DVDs through the mini? Please help mac wise!

  N ° the Xbox does not support the disk share

• HP Mini 110: Lack of Wifi/Ethernet card drivers

  I am currently having the same problem as the OP of this thread:

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/HP-mini-110-missing-network-adapter-driver-...

  Recently, I reformatted the HARD drive and installed a new version of Windows 7 Starter and could not find the right drivers for the wifi/ethernet cards to work.

  The hardware for the ethernet controller ID is:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04

  And the hardware for the network controller ID is:

  PCI\VEN_168C & DEV_002B & SUBSYS_30A11895 & REV_01

  Hello:

  What is the number of full model of your mini 110?

  The drivers you need are on the support page for your specific model.

  Driver Realtek Ethernet (LAN).

  PCI\VEN_10EC & DEV_8136

  Atheros Wireless LAN driver.

  PCI\VEN_168C & DEV_002B

• SSD intel SRT speed up lack of button (caching)

  Hello comrades alienware owners, I'm a newcomer in this club and been out of the loop of things tech for about 4 years I lived under a rock. I recently did some intensive research because I bought my new computer laptop m17x of R4. so here is the installer, Windows 7 pro sp1 i7 3740QM 1 TB 5400 RPM HARD drive 32 GB SSD HD 7970 m 32 GB of ram my goal was of course to the caching to improve performance. so, from the start of factory setting, the interface of sorts shows the acceleration tab, I clicked in but click on Cancel again to jump off to make sure I have the right to all components, I then immediately restart and checked my bios, which she read in the RAID, after connection and my TRIE, the acceleration tab when missing opening. I did a few things here on: I've updated to the latest driver, after I uninstalled the previous ones. I've switched back to AHCI then reboot, then reboot again to change to RAID, then reboot again without success. It does not display. off desperate measure, I checked there is no any partition on the SSD drive to reformat the SSD drive. Then I restore the system to its factory condition. former driver has been installed, the bios is in RAID mode, but the acceleration tab does not always show. I've now updated my BIOS with the latest version of A11 too which doesn't always help. Could someone help me on this?

  You can also try my guides here, I use Windows 8.1 http://gensanblog.com/2013/10/21/how-to-fusion-hdd-and-ssd-using-intel-rapid-storage-technology/

• Windows 7 - Start Menu power supply lack of button 'stop', 'sleep '.

  Hi all

  My power button on Start Menu is missing the 'Close' and 'Sleep' options.   Everything is displayed is 'Locked', 'Disconnect' and 'Switch user' (in gray).  I searched Internet solutions and tried * everything * recommended that in return, including:

  -right click on the power button and by changing properties

  -modification of the options in the application of power of Control Panel

  -change the registry setting to Start Menu

  -using the Group Editor to change the option to Start Menu power button

  -checked all of my system files to be ok

  I've been smart to do these things and always return the default settings later.

  Other observations:

  -the power button on the main Windows login screen * fact * have these options

  -When you use the Control Panel power approx., I even not give me the option to change the Start Menu power button

  I use Windows 7, 64 bit, professional on a Phenom II X 4 4 GB system.

  Help!  I'm a poster for the first time and I'm completely stumped.

  Thank you

  Minnesota Bob

  I solved the problem.  It turns out that there are two 2 group policy changes that had to be modernized.  Here's what to do (some steps copied from Microsoft article)

  Click Start, run.
  Type gpedit.msc , and then click OK.
  Navigate to the following location:
   
  Taskbar and User Configuration Administration\menu located
   
  Double click on "Remove and prevent access to the close command.
  Select 'off '.

  Double-click on "Start change power button Menu"

  Select "enabled."

  Choose "Shutdown".

  If you don't want to go through these steps, create a new user account will work as well.  Of course, then transfer all your settings of the old user account.

  Minnesota Bob

• Lack of button "clean up system files".

  I tried to run Disk Cleanup and clear up some space winsxs takes too much space, but I noticed that the button "Clean up system files" is missing. I use Windows 7 Ultimate

  A new feature has been added to cleaning disc in October 2013, which is not available in cCleaner. You must change the existing settings to take advantage of the new feature. Type Disk Cleanup in the search above the Start button box and press ENTER. Click OK and after the calculation of space, you will see a window with a list of files to delete. Use the right-hand scroll bar to see the entries hidden further down the list. Check the boxes in front of the backup of the Service Pack files and cleaning Windows Update and click OK if you don't see cleaning of Windows Update then click clean up system files . You can see savings every time after Windows has been updated, but they are not as important when it is run after the first time. You must restart the computer to complete the process.