minimum height for subforms flowed

Similar Questions

• I can't set the minimum height for a subform flowed

  I have a subform, sfQ, which contains four elements, tfInitials, cbQ, tfTypeCheck (hidden) and the tfQ1. tfQ1 is a text field that allows multiple lines. The four begin with a height of in.3125. When I put the subform to cast, the elements are moved to 'of top-down and the height of the a.9375 subform changes (as I expect). When I change the subform to the 'Western text', height of the subform is unafraid to return to in.3125. I expect to shrink down, given that the subform has no need to be so great when the lines are executed from left to right.

  If I select the subform and go to the page layout palette, and then type in the height I want, he returns to en.9375.

  If I click and drag the area of resizing in design mode, it develops to its larger size.

  If I remove everything except a field and replace the subform flowed, he was always a.9375!

  If I go to the event of the subform docReady and adjust the height with this.h = '.3125in'; the subform will not grow when the tfQ1 text field receives a value of type long (two or more lines).

  Ideas on them get around this?

  I thought about it...

  I added a line to the docReady event, so now I have:

  This.h = ".3125in";

  this.maxH = "9" in

• minimum height of paper ip8720 in the custom paper sizes

  With the help of ip8720, when I set the height to 4.25 in custom paper size the image does not print correctly. If I leave the printer set the margins, I get the message «the limits of paper as defined by the PPD file size are a minimum height of 5 inches...» "If I set the margins mysself (to 0) part of the image is printed in a corner, not there at - there no way to print with a 4.25 inches paper size?  I could do with my old Canon printer. The reason why I need to this size, it's that I'm trying to print a photo on the bottom half of the book which is actually 5.5 wide and 8.5 high. I need only on the bottom so that I can then fold paper to make a card with the image on the widthx height 5.5 before - so 4.25 will not work in this case... the height must be 4,25 and width of 5.5 inches. Thanks for any ideas you may have. (I use an iMac).

  Hello.

  The minimum supported size is 3.5 inches wide by 5 inches high.  If the height is specified as something more smaller than 5 inches it will not print to avoid paper jams or feeding problems in case the book is actually less than 5 inches high.

  If you need additional information, find more help contact us.

• Minimum height and width does not work in the responsive project

  I'm working on a responsive project in Captivate 9, breakpoint Office, for one of the items minimum height 50px and Minimum width to 50px.

  In points out of office and Tablet, she gets no smaller than 50px. However, breaking Mobile, point it turns into 32px Min-Height and Min-Width 4.0px.

  The 32px Min-Height and Min-Width 4.0px take a coral color in the breakpoint Mobile.

  Why don't the 50px which was update to stop Office remain the same on all breakpoints?

  What is the purpose? A 50 x 50 pixel png? I just create a project that is sensitive with a png of 200 x 200, placed in the desktop view and then set the size of the object and the height to 50 pixels. When I pass between breakpoints, the size remains the same. The size and position properties are all a light purple color on each breakpoint, which I guess means that these attributes are inherited from the Office discovers.

  If the boxes under "Height" and "Width" have transformed a coral-colored, I guess that means that these attributes have been changed for this breakpoint.

  And you obviously already know. I guess that I'm just trying to say that he expected to run, as it does for me!

  You are able to adjust these modified figures go back to your desired size? The same thing happens if you create, say, a dynamic square object in the view of the Office? Have you tried right clicking on the object in the desktop view and selecting "Apply position properties from all points of view"?

• Will I put a fixed height for the FG div?

  Is that what I'll put fixed height for a fluid grid div so that the two boxes can be found in the same alignment.

  I want these two boxes (special features and story) appear in the same alignment in the layout of office...

  Instead of setting a height 'fixed', consider defining a "min-height" for both boxes. In this way, the two boxes will be forever by a 'minimum height' first parameter. If there is more content, it will expand again.

• Way to force the minimum height of the page?

  I use Dreamweaver and ColdFusion to my web site.
  
  I run a query from CF on one of my pages and everything is great.
  as long as there are about 20 rows returned, or almost.
  
  Unfortunately, sometimes there are 3 and my page is a header
  and footer with three lines between the two.
  
  Bad news.
  
  How to impose a minimum size for the part of dynamic data from my
  the page, but not to limit the height if there is more data?
  
  THX,
  
  Rick

  Thank you people! I used the approach of Thierry, but either would work.

  My stylesheet now includes this:
  {#mytable}
  min-height: 375px;
  height: auto;
  height: 375px;
  }

  and calls the following:

  Works like a charm in Firefox and IE.

  Thx again,

  Rick

• Take the minimum value for table data

  I'm storing test data in a table, with the hope that I can output the minimum value of the data. So far, I have used the table of max/min but can't make it work how I want. The test runs continuously in a loop of the holder. I get the minimum values in the table, but I would like to change the number of samples that the table contains, before it generates a minimum. The other option is that I run the test for a period of time (e.g. 3 seconds) and the table stores the data for this time then output 1 minimum value for the entire period.

  My current configuration VI is attached.

  Very appreciated

  Chris

  The size of the array in your VI is determined by the number of samples that you collect in your DAQ assistant, who is now 100 samples.  Never more, never less.

  How many samples do you want before you determine the minimum?

  Maybe what you really want to do is to build the table in the while loop and store it in a shift register, and when the loop has repeated enough times, then you take the minimum of built table.

• Error FSX Gold - "the graphics card does not minimum requirements for support of shader."

  I just bought FSX Gold and I have installed two of them, but when I click to open it it says "the graphics card does not meet the minimum requirements for the support of shader. This product requires a geForce3/Radeon8500 class or a better graphics card. Flight Simulator will now quit. "I went to support to see what happened and he said the need Shader 1.1 or later so I checked my Shader and he said he was Shader 2.0. you guys can tell me what's wrong.

  Details:
  CPU -  Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz
  Speed of the CPU to 2.4 GHz Performance rated at: 5.28 GHz
  GB OF RAM - 6.0
  OS - Microsoft Windows Vista Home Premium Edition Service Pack 2 (build 6002), 64 - bit
  Video card - Intel (r) G33/G31 Express Chipset Family

  • Video RAM - 287.0 MB
  • 3D - Yes
  • Hardware T & L - No.
  • Pixel Shader Version - 2.0
  • Vertex Shader Version-2. 0a

  Version of DirectX-11, 0
  Sound Card - Realtek High Definition Audio
  Free disk space - 356.3
  DVD - ROM - HL-DT-ST DVD-RAM GH10L

  That's all. I hope you can help!

  Hi Man Com,.

  I suggest updating the video drivers from the manufacturer's Web site and make sure that direct X is enabled in the graphics card Control Panel conrtol.
  For more information, you can consult the following articles:
  Updated a hardware driver that is not working properly

  The problems of the game performance

  You can also read the following article and see if it helps.

  Solving graphic problems in Flight Simulator X

  Hope this information is useful.

• This computer does not meet the minimum requirements for installing the software

  Hello

  I try to install the graphics driver on my laptop Dell Inspiron N5010 (I tried this three R252283, R257270 and R285472). But every time I get the error indicating that "this computer does not meet the minimum requirements for installing the software.

  Here are the details of my laptop configuration:

  Core i3 processor, RAM 3 GB, windows 7 64-bit Operating system

  Makes sense, you do not have the integrated Intel graphics card, but rather have an AMD graphics card, install it:

  http://ftp.Dell.com/video/R272410.exe

• Minimum height of the taskbar in windows 8

  Hello

  I want to make the taskbar is as thin as possible .
  I don't want to hide...

  is it possible to do?              regedit?

  Thank you
  

  Hi Lio,

  Unfortunately, you will not be able to change the minimum height of the taskbar. You can increase the size but not reduce it beyond the size that it is defined. Try changing the screen resolution. If you increase the screen resolution, the size will be reduced.

  It will be useful. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Error "this computer does not meet the minimum requirements for installing the software" when you try to install Intel_ME_Driver.

  Original title: error this computer does not meet the minimum requirements for installing the software

  I tried to install Intel_ME_Driver because I have updated my pc to win7 for win8 when I try to install they showed me an error message saying: this computer meets the requirements for the installation of the software need to I do?

  Use the Intel Driver Update utility

  Utility update Intel drivers allows you to get the latest drivers for audio, network, other components: http://is.gd/jQGR7

• Muse - Chrome - minimum height.

  Hey!

  Recently, I published my Web site (at www.emilseres.com) and are having problems with the combination of Chrome and the minimum height of the site. In Safari and Firefox, it looks great. However, in Chrome it's basically endless scrolling. Deleting this in the code, the site seems normal (inspecting in Chrome - however, can't find the code in my css/index).

  Everyone recognizes the problem and have a solution?

  Kind regards

  Emil Seres

  I checked the site in browsers, specifically in Chrome and I don't see the problem. I believe that you have already solved the problem.

  Thank you

  Sanjit

• Home minimum memory for HA?

  The minimum memory for ESXi should be 2 GB of RAM, but I wonder if it's enough for the performance of the HA Agent? He failed on the two test ESXi with 2 GB of RAM to configure HA and something error messages made me suspect lack of RAM. After you have added up to 2.5 GB of memory through HA.

  So my first question is: all amount of RAM minimum on a host for HA to work?

  On the same cluster with these two small ESXi servers, I noticed that the size of the slot was about expected, something like 256 Mhz and 360 MB of RAM. HA setting = tolerate 1 node and small running virtual machine only. Which was quite strange for me was the the advanced Runtime Info reported only 1 single location across the cluster and when making a HA test with power off of a host, the virtual machine has not failed to wire and HA ' not enough resources for failover VM"or similar. Why this might be happening? HA expects more RAM available?

  HA requires 2 300 MB memory allow. If you have less than this amount, you will get an error when trying to activate HA.

• Minimum requirements for the installation of 12 c OEM in VMware

  All,
  
  I intend to install OEM 12 c grid in my computer personal laptop vmware workstation for aim practice.
  
  Can someone list me the minimum requirements for the installation of 12 c OEM i.e. RAM minimum size required, swap space, disk space etc...
  
  Thanks in advance,
  Florine

  Manon says:
  All,

  I intend to install OEM 12 c grid in my computer personal laptop vmware workstation for aim practice.

  Can someone list me the minimum requirements for the installation of 12 c OEM i.e. RAM minimum size required, swap space, disk space etc...

  It took a minute on Google to get this,
  http://www.Oracle.com/technetwork/OEM/framework-infra/em12c-sizing-1590739.PDF

  Aman...

• How to get all minimum values for a table of valuable documents?

  I need to get the list of records of the minimum value for a table that has the structure and the data below
  

  create table emp (name varchar2(50),org varchar2(50),desig varchar2(50),salary number(10),year number(10));
  
  insert into emp (name,org,desig,salary,year) values ('emp1','org1','mgr',3000,2005);
  insert into emp (name,org,desig,salary,year) values ('emp1','org1','mgr',4000,2007);
  insert into emp (name,org,desig,salary,year) values ('emp1','org1','mgr',7000,2007);
  insert into emp (name,org,desig,salary,year) values ('emp1','org1','mgr',7000,2008);
  insert into emp (name,org,desig,salary,year) values ('emp1','org1','mgr',7000,2010);
  commit;
  
  
  SELECT e.name,e.org,e.desig,min(e.year) FROM emp e,(
  SELECT e1.name,e1.org,e1.desig,e1.salary FROM emp e1
  GROUP BY (e1.name,e1.org,e1.desig,e1.salary)
  HAVING COUNT(*) >1) min_query
  WHERE min_query.name = e.name AND min_query.org = e.org AND min_query.desig =e.desig
  AND min_query.salary = e.salary
  group by (e.name,e.org,e.desig);

  With the above query, I can get the year less value where the EMP has maximum salary. It returns a single record. But I want all the records that are minimal compared to the value of the year max
  
  Power required

  emp1     org1     mgr     7000     2008
  emp1     org1     mgr     7000     2007

  Please help me with this...

  Hello

  Aggregate functions reduce the result set with one row per group.
  Almost all of the aggregate functions are homologous analytics that can give the same results without restricting the result set. Since you want the output to contain several lines per group, then the analytic functions are probably better for you.

  Here's one way:

  WITH      got_analytics     AS
  (
       SELECT     name, org, desig, salary, year
       ,     MAX (salary)  OVER ( PARTITION BY  name, org, desig)          AS max_salARY
       ,     ROW_NUMBER () OVER ( PARTITION BY  name, org, desig, salary
                                  ORDER BY        year  DESC
                         )                              AS year_num
       FROM    emp
  )
  SELECT     name, org, desig, salary, year
  FROM     got_analytics
  WHERE     salary          = max_salary
  AND     year_num     > 1
  ;