Minor emergency - cannot access CFAdmin after update 20 (10 CFServer)

Hello, all.

I have a CF server, which is isolated from the internet, so as you can imagine, it is not being updated often.

so... I downloaded the update to address mandatory CF10 jar, and the jar file CF10 update 20, them copied on my server (Windows 2008), then dropped to an elevated command prompt and ran the jar files, required first, reboot, then 20 update, restart.

Now, when I try to access CFAdmin, I get an error message: file not found - {drive}:\www\Coldfusion\cfusion\wwwroot\CFIDE\Administrator\cftags\inputfilter.cfm }

We do not have our webdocs in the same folder as the CFIDE.  So I am sure that this can be corrected by editing an xml file, but I don't know where or what to change.

Our webdocs are in {disk}: \Webdocs\

Our CFIDE is in {drive}: \www\Coldfusion\cfusion\wwwroot\CFIDE\

How can I fix?

V/r,

^_^

Thank you, senchaworld and ImmanuelNoel.  I actually managed to fix the problem, and I was lucky in the way he did _EXTREMELY_.

It turns out that, if you place your CFIDE in another location of your webroot, you really, really, REALLY should NOT NOT NOT apply updates using the files .jar from a command prompt.  Never, never, never, never, never.    You must use the CF10 + "Server Updates" in the CFAdmin and here's why: when you use CFAdmin to apply updates, then the CF instance is performing the update and that he knows where everything is, as opposed to simply the .jar file, which has no access to the locations of where everything is, and uses the default values for everything.

MY INCREDIBLE LUCK:  I did some looking around and noticed that in my drive {}:-{cf_install}-folder is a folder called CFIDE which had today (yesterday) date and a folder called CFIDE.old who had the date as the date for the install folder.  Apparently, the files .jar renamed my CFIDE original CFIDE.old and then downloaded the updated files in (to the-that-time-uncreated) CFIDE folder.

MY SOLUTION:  I made a copy of CFIDE.old, renamed CFIDE CFIDE.new, renamed CFIDE.old CFIDE and copied the contents of CFIDE.new in CFIDE.  I restarted the service, and WHOOMP, THIS y IS! I opened a session and check the updates to the server for the current patch level, and he showed that 20 update has been applied successfully.

HUGE RELIEF!

I would have mentioned this yesterday, but it was so relieved that my CF has not been sprayed I just melted in the carpet, and the liquid fingers do not type very well.

V/r,

^_^

Tags: ColdFusion

Similar Questions

  • Cannot access folders after update 8.1

    so... It's particularly frustrating. I am running the latest version of Mavericks (OS X 10.9) and the latest version of Fusion (6.0.1) I have a virtual Windows 8.1 computer, since I upgraded to 8.1 I can't access my shared folders. I see them all on my Windows desktop, but when I click on them, nothing happens. I tried to separate them, restart, then sharing again... same result. Severe pain in the ass. Anyone have any ideas?

    Reinstall the VMware tools

    Click on the VM menu > reinstall VMware Tools.

    Follow the instructions on the screen.

    If this makes no difference, you may have to check the registry .

  • Unable to access webmail after update to osx el capitan (404 - file or directory not found)

    I can not access webmail after update to osx el capitan. I get the message "404 file or directory not found. The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable). What should do?

    Contact your webmail provider and ask the url appropriate to their webmail page. Is which provider? What url you put in the address bar?

  • cannot receive emails after update KB890830

    cannot receive emails after update

    Hello

    KB890830 is the Microsoft® Windows® Malicious Software Removal Tool.

    It is normally a part of your monthly updates.

    At the bottom of the Section 'SUMMARY' in this Microsoft link under "How to receive support", there is a contact number for no support of the charge.

    http://support.Microsoft.com/kb/890830

    See you soon.

  • Cannot access bios after installing the video card

    I have a PC HP 800 G1 tour.  When I install an EVA GT 520 external video card I can access is no longer the first screen to get the bios unless I get out the video card.  I want to change the bios to use only the external card, or at least to see the initial splash screen, but cannot access it.  It is running windows 8.1.  I updated the bios to the lasest version and still the same.

    Hello:

    You may need to change some BIOS settings - even if you add an external video card...

    http://support.HP.com/us-en/document/c03653200

  • Cannot access the necessary updates

    I just reformat the hard drive on my computer and reinstalled the operating system from the disk provided with the computer system.  At the time I bought the computer operating system is Windows XP SP2. I'm trying to access updates needed to bring the BONES to the current version of Windows XP SP3 but cannot access necessary updates.  I did it for another computer I have about 3 months ago and had no problem doing this.  Now, whenever I try to access the necessary updates, I get a message that says the site cannot open the page I am trying to open. This happens on Windows Update and Microsoft Update. How can I solve this problem?

    Bob,

    Please see the thread below for a possible solution:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-download-SP3/a71b55ee-10d4-410C-8b0b-a2114f7d8b94 >>

     
    UTC/GMT is 19:13 Friday, September 14, 2012

  • Cannot access or download updates with the automatic windows update...

    I get this message when I try to download or access automatic updates: "Windows Update cannot currently check for updates because the service is not running." You may have to restart your computer. "Nothing else is affected - I still have access to the internet and all of my programs, but knowing how important updates are that I really need to solve this problem. I tried many things, including restarting the service; a multitude of antivirus/malware programs - about you name nothing works... I use Vista Edition home premium 64 on a hp Pavilion dv4 PC laptop with a 500 GB hard drive. I have OTL.txt; extra newspapers ' s.txt and checkup.txt if it's of any help... I would really appreciate some help thank you.

    Hello

     
    • Did you of recent changes to the computer?
    • This all the troubleshooting steps you have tried so far?
    • What is the accurate or complete error message or the error code when the problem occurs?
    If you did not do the methods mentioned below you can do the same thing to see if that fixes the problem:
     
    Method 1:
    I suggest you open the Troubleshoot utility following the steps in the below link:
     
    Method 2:
    I suggest you to check if the automatic update feature is enabled or disabled. If it is set to Off you can activate it by setting to on. See the below link to do the same thing:
     
    Method 3:
    You can access the below mentioned link and use the tool mentioned in the article to automatically reset the Windows Update components:
    http://support.Microsoft.com/kb/971058
     
    I hope this helps!

  • Cannot create folders after update of Lenovo to tab 2 A10

    My Tablet has downloaded an update for Lenovo this morning. After the update, all my files are gone, and my apps are spread over two pages in alphabetical order. I'm unable to hold and drag to create new folders. When I take an application icon, it brings to the top of the home screen to move the shortcut to the application. How to create folders after update?

    I just thought of it. You must move the shortcuts to the application in one of the home screens, then you can hold and drag to create folders. This seems like an unnecessary extra step...

  • HP 190 t and cannot access network after upgrade to win 8

    Upgrade to Windows 8 and cannot access the internet on my desktop HP 190 t.  No driver available on the HP support site.  I can see received/transmitted data between router but that is as far as it goes.   Have ideas or how to get the chipset drivers or should I get another network card?  Everything else seems to work very well.

    I found the problem.  Norton Security Suite does not work with Win 8, causing conflicts.   I have remove the application configured defender and firewall Windows to maintain security until Norton product can support 8 Win.

  • Cannot access BIOS after own Win 7 installed on the new HD

    The machine is HP Elite E9240F. Here's what I did.

    1 replace the plant HD with faster player - went well

    2. clean install Win 7 on new drive - activate - went well

    3 reinstall the disc supplied with the box in the first place & format - went well.

    Now everything starts fine, and loads of Windows. NO problem BUT I cannot access the BIOS more. Not that I need at this time, but I would like to know that where I did it, I could.

    Repeated F1 or F11 at startup pressure will produce the black screen for the Windows Boot Manager.

    I removed the CMOS battery and retried - same results. I can access the blue screen when I select the boot sequence by pressing ESC but never can I go back in the system BIOS.

    Thoughts?

    All these systems are a bit different but F10 to enter the bios to me.  If it is your PC then F10 to enter the bios: http://support.hp.com/us-en/document/c01925486

  • Access of BBM cannot BBM shop after update to Version BBM 10.5.13.14 since beta Zone

    Phone = Z10STL100-3

    BB10 = 10.2.1.3337

    After the update to BBM beta area to the last official version 10.5.13.14 I can't access BBM shop. The BBM app shows a screen with a blue header that says BBM Shop with a message in the center of the screen that says "cannot open BBM store" with a button "Try again" message below.

    Of course, I tried the button try again without success, I did the equivalent of a battery pull because I needed to pass an empty battery with a charged battery.

    At the suggestion of a friend BBM I had tried to change the time settings and time zone and tried to access the BBM shop and even tried after set time settings and TZ return to the original settings.

    I also tried a traction battery after a hold button close and still can't access BBM Shop.

    I understand there are very few others who have the same problem.

    Thank you for your help and wait until the full version is an OK option.

    10.6 just releaased and can now access the shop with her again

  • Cannot access internet after installing the latest Windows Update

    * Original title: Question access to the internet after you have installed the latest update

    Last week, I installed the latest update of Windows 8, however once installed, I was no longer able to access the internet and became a message saying that the page cannot be displayed. Below it there is a button to click to solve the problem of connection but I did and it came back with no connection problem.

    I reset my router, but there was no question that I could access the internet on my phone and my roommates laptop. The only way that I could access the internet again was to restore my pc and remove install.

    I was then forced to install the update tonight and it's the same thing so I had to uninstall these updates again to access the internet.

    Can you please tell how can I install the update it will affect my ability to access the internet?

    Hi Victoria,.

    Please help me with the following suggestions:

    1. using modern Internet Explorer user interface or Desktop Internet Explorer?
    2. your computer is in a cable or wireless internet connection?

    3. What is the number of the kb article that is causing the problem with the internet after installing the update?

    4. are you referring to Windows Update (KB2919355) 8.1?

    Windows Update: Frequently asked Questions see (how know what are updates
    been installed?)

    http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

    Method 1: After the update is installed, configure the computer to boot and check if you questions persists:

    How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135/en-us

    Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

    Method 2: Click on the link below to troubleshoot if the internet explore does not work:

    Why can't connect me to a network?

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

    Warning: Reset Internet Explorer settings will not affect your browsing history, unless you check the delete personal settings during the reset. If you want only to view or delete your browsing history, you don't need to reset all the settings of Internet Explorer.

    I hope this helps. Answer please if you have any additional questions with Windows.

  • Cannot access Internet after installing the latest Windows updates

    Hello

    updated the last windows update and now can not access the internet even if I said I'm on internal appreciate any help in this matter.

    Have reset the laptop to an earlier date and no problem, but as soon as I download the update of windows, no internet access

    " Original title: blocked internet access"

    Hi Eugene,

    Thanks for posting your query in Microsoft Community.

    I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

    1. What is the type of internet connection you use - wired or wireless?
    2. Do you get any error message when there is no internet access?
    3. What is the number of KB of the update, after which the internet disconnects?

    [To view your history of update:]
    a. Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on parameters, typing or clicking on Change PC, then type or by clicking on update and recovery.
    [ b. press or click on see your update history.]

    The question could arise if the specific update makes changes in the Windows network properties and the update package has been damaged. Other important reasons include the firewall from the security software, third-party software conflicts etc.

    In order to diagnose the problem, I would suggest trying the following methods and check if the problem persists.

    Method 1:

    Method 1: Troubleshooting of connection Internet run.

    a. press the Windows key + W key on the keyboard.

    b. type Troubleshooting in the "search" tab and press enter.

    c. click show all on the left panel.

    d. click on Internet connection, will new popup window.

    e. follow the instructions on the screen.

     

    Let us know the results performing the Troubleshoot utility.

    Method 2:

    Reset the DNS and TCP/IP settings.

    1. Press the Windows key + X.
    2. Click prompt (Admin).
    3. Please enter the following commands and press ENTER after each one.
      NETSH INT IP RESET
      IPCONFIG/FLUSHDNS

    Restart the computer to check the issue.

    If the problem persists, refer to the following method.

    Method 3:

    Temporarily disable the security software and check if it helps.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most

    cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Additional information:

    Windows wireless and wired network connection problems

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • Cannot access Windows Automatic Update after fixing error "generic host for Win32 process.

    XP Media Center Edition, Version 2002, SP3

    Had a problem with "Generic host process for Win32 has encountered a problem and needs to close."  Follow-up of the instructions on this link:

    http://support.Microsoft.com/kb/931852

    Seems to have cleared the error message.  So far so good.

    However, now a Windows Update does not work.  Security Center Windows were told to go to control panel > system and use the Automatic Updates tab.  But, if I go to control panel > system, the Automatic Updates tab does not appear.

    I also went to the control panel > Services.  Tried to start the automatic updates service.  Received this error message: could not start the service automatic updates on Local computer.  Error 126: The specified module is not found.

    Please help me to get the automatic updates to run.  Thank you!

    Go to OPTION B (or, preferably, OPTION C).

  • Cannot access internet after turning off the computer during the update

    original title: computer problems

    After windows has been a configuration that we couldn't not get out of the loop from 0% for my daughter close, now it used to connect to the internet, and when we try to watch whatever it is to diagnose why it freezes just straight up

    Try a system restore to a Date before the problem began:

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for